Related
The official sammy case I got has the camera slot near the wedge, and yet the photos on their website have it the other way round! What's going on??
The bookcase I received, has the camera slot on the inner wedge (photos below), and it causes two problems. i) the tablet is turned 180 degrees in the 'typing mode' (shallow support) and some programs like Youtube can't do a 180 degrees turnover, and ii) when you close the bookcase, the short magnetic clip does not cover the camera when closed, thus the camera is exposed.
http://www.flickr.com/photos/[email protected]/5907483311/
http://www.flickr.com/photos/[email protected]/5907483363/
Yet, when you look their photos for the bookcase, it shows the camera slot on the far side, thus the tablet would not be upside down in 'typing mode' and the clip covers the camera slot.
http://www.samsung.com/us/mobile/galaxy-tab-accessories/EFC-1B1NBEBSTD-gallery
(select "view larger" on the lower right side to see the position of the different camera slot)
http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1B1NBEBSTD
Can it be that the bookcase I received, which had the part number EFC-1B1NBEGSTA is different from the one on display which has the part number EFC-1B1NBEBSTD ?? But Sammy didn't say anything about different models, and I for one, would prefer the camera slot on the far side. Did you all receive the bookcases like mine, or did anyone receive bookcases like the one on their website? Did anyone actually receive a bookcase that looks like the gallery one (STD) rather than mine (STA) ??
I've got the same one as you. My guess would be that the pictures on Samsung's website are of what the case was going to look like originally.
Sent from my GT-P7510 using XDA Premium App
lemonyellowblack said:
I've got the same one as you. My guess would be that the pictures on Samsung's website are of what the case was going to look like originally.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
Ditto here. I also figured that the display model was an earlier pre-production model that was changed.
As far as the OP's concerns, while it would be nice to have the camera covered I don't think it's that big a deal. Allowing the camera to be recessed should protect it from most wear and tear as compared to what my caseless Evo has endured with its raised camera.
Just a photosop fail on their part
I just found this Samsung book cover case with a slightly different model number over at tigerdirect.com. It shows the rear facing camera lens hole on the opposite end from the model you received (same pictures that were on the Sammy website). Has anyone purchased this model and is the camera location different? I noticed the different model number and was actually worried about ordering from Tiger Direct in fear that it was an older model or something (version 1.0).
Samsung's website model: EFC-1B1NBEBSTD
Tiger Direct's model: EFC-1B1NBECXAR
Sorry I can't post links yet, you will have to search on google for "samsung galaxy tab 10.1 book cover case" and the top listing under shopping should be the tiger direct link.
The product id of the book cover case I bought from Samsung a couple of weeks ago was EFC-1B1NBEGSTA. Now when you put that product in your shopping cart it comes up as EFC-1B1NBEBSTD. I wonder if this new product id signifies a modified book cover case with the camera hole in the other position...
Noticed this as well but I thought it wasn't that big of a deal to post - It's not the first time Samsung messes up photoshop on their own website.
Most of the pictures on Samsung's site are photoshop fails.
http://www.samsung.com/us/mobile/cell-phones-accessories/ECR-D1A3BEGSTA-gallery
1st and 2nd pictures are contradictive (USB port is on the bottom of the phone)
aptmowe said:
The product id of the book cover case I bought from Samsung a couple of weeks ago was EFC-1B1NBEGSTA. Now when you put that product in your shopping cart it comes up as EFC-1B1NBEBSTD. I wonder if this new product id signifies a modified book cover case with the camera hole in the other position...
Click to expand...
Click to collapse
There have been 3 totally different part numbers for this case so far. So far 2 of the 3 photos have been posted in various threads and they are identical.
Well, I wouldn't mind a bookcase that looks like the one on the site, rather than the one I have ... Will keep an eye out to see if different versions actually come out, in the US or elsewhere.
I have to say, even the cnet gallery here shows the GT10 in an upright position when the bookcase is set to typing mode. Unless they deliberately took it out and turned it upside down, this photo would also support the notion that there is a Sammy bookcase that has the camera slot cut out on the far side rather than near the binding ...
http://reviews.cnet.com/2300-3126_7-10008260-13.html?s=0&o=10008260&tag=mncol;page
Jnn1 said:
Well, I wouldn't mind a bookcase that looks like the one on the site, rather than the one I have ... Will keep an eye out to see if different versions actually come out, in the US or elsewhere.
I have to say, even the cnet gallery here shows the GT10 in an upright position when the bookcase is set to typing mode. Unless they deliberately took it out and turned it upside down, this photo would also support the notion that there is a Sammy bookcase that has the camera slot cut out on the far side rather than near the binding ...
http://reviews.cnet.com/2300-3126_7-10008260-13.html?s=0&o=10008260&tag=mncol;page
Click to expand...
Click to collapse
There is only one version of the case. You can tell CNET deliberately placed the Tab in the case upside down, since the cut-out for the headphone jack is on the bottom.
My bet would be a last minute redesign so that the head phone jack would not be covered. When on the go, it is probably the only port you want to make sure is not covered.
Samsung should have updated their site to reflect that though.
Good point about the headphone jack....
When I got this case I was really disappointed in design.. I like the materials and build.... The case just feels like it is backwards. I decided to put my tab in the opposite way... I will likely never use the camera, and Its covered up by the case when you open it all the way.
The only way to use the camera with the case is to hold the tab upside down and let the cover hang.. Just silly. You will fumble around with it for sure the first time you try to take a pic with this case on - trying to figure out what way to hold it so the camera is not blocked by case.
jbruns said:
Good point about the headphone jack....
When I got this case I was really disappointed in design.. I like the materials and build.... The case just feels like it is backwards. I decided to put my tab in the opposite way... I will likely never use the camera, and Its covered up by the case when you open it all the way.
The only way to use the camera with the case is to hold the tab upside down and let the cover hang.. Just silly. You will fumble around with it for sure the first time you try to take a pic with this case on - trying to figure out what way to hold it so the camera is not blocked by case.
Click to expand...
Click to collapse
Like you said, I would rarely use the camera but messing with it in the case I simply hold it at the top with the fingers of my left hand holding the cover up and my palm on the top left of the tab. Annoying but works fine since it's so lite.
They should have made it with a removable top (cover). They could have had the 2 pieces slide together with a plastic hinge of some sort. Or maybe some heavy velcro.
or just made a smart cover like the ipad
Ok, so the Samsung website has it listed as a leather case... and the pics in this post look like the outside flap may be leather... mine is plastic and nylon and only the inside flap that touches the screen is leather. Is everybody else's like that?
Sent from my GT-I9100 using XDA App
daddymatt said:
Ok, so the Samsung website has it listed as a leather case... and the pics in this post look like the outside flap may be leather... mine is plastic and nylon and only the inside flap that touches the screen is leather. Is everybody else's like that?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
It's plastic. There is no other version. Samsung's photos are wrong as is their description. You would think the actual manufacturer would get it right or at least after 2 months fix it.
Curious if anyone has one or knows of a manufacturer that is selling them. I would like to start running and biking with a bit more comfort as I find the screen to large to keep in my pocket when doing these activities.
Thanks!
You might look into the Tune Belt AB85. There's a video on YouTube where the guys shows how it holds a Galaxy Note so surely the S3 would fit. The AB86 is designed for the Galaxy Nexus so you might look into that too. I own a Tune Belt that works with my Galaxy S2 and I found it to be a good product.
fooldog01 said:
You might look into the Tune Belt AB85. There's a video on YouTube where the guys shows how it holds a Galaxy Note so surely the S3 would fit. The AB86 is designed for the Galaxy Nexus so you might look into that too. I own a Tune Belt that works with my Galaxy S2 and I found it to be a good product.
Click to expand...
Click to collapse
Funny you mentioned Tunebelt, I just received a message from one of their customer reps that the Galaxy Nexus model should fit the S3 perfectly.
Can be purchased directly or through Amazon: http://www.amazon.com/Tune-Belt-Arm...2572943&sr=8-1&keywords=Tunebelt+galaxy+nexus
Similarly I managed to make my Droid X Tunebelt accommodate the S3 (after some minor alterations )
http://forum.xda-developers.com/showpost.php?p=28618450&postcount=21
Also note there's a thread already dedicated to this discussion:
http://forum.xda-developers.com/showthread.php?t=1736407&highlight=armband
Jubmasterflex said:
Funny you mentioned Tunebelt, I just received a message from one of their customer reps that the Galaxy Nexus model should fit the S3 perfectly.
Can be purchased directly or through Amazon: http://www.amazon.com/Tune-Belt-Arm...2572943&sr=8-1&keywords=Tunebelt+galaxy+nexus
Similarly I managed to make my Droid X Tunebelt accommodate the S3 (after some minor alterations )
http://forum.xda-developers.com/showpost.php?p=28618450&postcount=21
Also note there's a thread already dedicated to this discussion:
http://forum.xda-developers.com/showthread.php?t=1736407&highlight=armband
Click to expand...
Click to collapse
Has anyone tried the AB86 model? I have a smaller TuneBelt that I used with my HTC Desire, and there is no way that you can get headphones in with the S3 going in to the holder top-first (as I'd want to use it), as the neoprene covers exactly where the headphones are. There are only gaps in the corners and middle. It would work going in bottom-first, as then the headphone access would be at the open end.
Does the AB86 model improve this to allow headphone access from either end with the S3?
I've been happy with the build quality of the TuneBelt. Another cheaper but similar looking alternative that I've seen is from iGadgitz http://www.igadgitz.com/products/fi...for-samsung-galaxy-s3-iii-i.html#.UEi0oo1lQs4
That's specifically for the S3, so should definitely have the correct headphone access, as well as labelling where buttons are. Has anybody got any feedback on this?
I wasn't too happy with how the TuneBelt fit, so I returned it and picked up a Belkin EaseFit Plus. It's a much better fit for both my arm and the phone. My only complaint is that, despite it's claims, it is most decidedly not sweat-proof. Maybe it is from the front, but not so at all from the back. The TuneBelt seemed to do a somewhat better job at keeping the phone dry from sweat, probably because the fabric is heavier/thicker.
Hi Guys,
I have found this one
http://www.ebay.es/itm/New-PU-Leath...ng-Galaxy-Note-10-1-N8000-White-/130774374551
It looks like the official one. Have some one bought it? If so, is the quality acceptable? I am thinking to get one of this, but my main concern is to find a poor quality.
I use the official Samsung book cover that I purchased in grey from the UK, it is the one I use daily as it is very practical for my uses however unless you transport it in a padded case, there is still a risk of damage due to the original book case being so thin and does not close with any kind of locking mechanism.
I overcame this with an excellent solution using a protective zipper pouch called the zeroshock case which is padded inside and has excellent shock/drop proof qualities. Once out of the zeroshock case, in use it has a thin form factor which is perfect for practical uses around the office.
The case also folds to the perfect angle for typing or handwriting using a software keyboard or S-pen in its lower position and also stands up at an upright angle for when you want to watch videos or use it for typing when using a standard /Bluetooth hardware keyboard.
I have taken some pictures of the case demonstrating the above and will add pictures to show you my setup.
Edit: pictures added
carabassot80 said:
Hi Guys,
I have found this one
http://www.ebay.es/itm/New-PU-Leath...ng-Galaxy-Note-10-1-N8000-White-/130774374551
It looks like the official one. Have some one bought it? If so, is the quality acceptable? I am thinking to get one of this, but my main concern is to find a poor quality.
Click to expand...
Click to collapse
I have the cover, and I really like it because of the slim profile. I have the white version of the note and book cover, and I don't want to carry it around for fear of it getting discolored of dirty looking.
Hasc,
Quick question about your pictures. Where did you get the zero case? Also it seems in your pictures you have 2 different pens - one looks like the galaxy note pen and another with the eraser? Can you identify the items in the picture? I understand the s-pen nubs and ring holder to extract them, but i'm curious about the last picture why you have a usb to micro-usb slot cord. What do you use that for?
sledgie said:
Hasc,
Quick question about your pictures. Where did you get the zero case? Also it seems in your pictures you have 2 different pens - one looks like the galaxy note pen and another with the eraser? Can you identify the items in the picture? I understand the s-pen nubs and ring holder to extract them, but i'm curious about the last picture why you have a usb to micro-usb slot cord. What do you use that for?
Click to expand...
Click to collapse
sledgie,
I got the zero case from gearzap.com - product id: 19906 - Zeroshock 3 Netbook Case 8.9"-10.2" - black @ 15.95 Inc VAT
pens - black one is the standard galaxy note one with eraser, white one is the Bluetooth pen that is charged by the black micro usb lead on the picture
The white usb adapter is used to connect usb sticks, mice, hardware keyboards etc.
carabassot80 said:
Hi Guys,
I have found this one
http://www.ebay.es/itm/New-PU-Leath...ng-Galaxy-Note-10-1-N8000-White-/130774374551
It looks like the official one. Have some one bought it? If so, is the quality acceptable? I am thinking to get one of this, but my main concern is to find a poor quality.
Click to expand...
Click to collapse
I have finally taken the decision to buy it (http://www.ebay.es/itm/New-PU-Leath...ng-Galaxy-Note-10-1-N8000-White-/130774374551), although it is not the official one (I think the official one is too expensive, 10% of the tablet's value ). I will post the pictures as soon as I get it. On the other hand, I have already a zipper pouch case which is the one I am using daily, therefore I will have a good match at the end.
Damage to Note due to magnet?
Hi i have purchased this cover and found out that the magnet causes the spen to be less accurate in the areas close to where the magnet is.. does anyone know if this can cause a permanent damage? In other thread someone posted this:
I found this in Galaxy Note manual
' Do not use carrying cases or accessories with magnetic closures or allow
your device to come in contact with magnetic fields for extended periods of
time. ' Page 180
but i dont know if this counts i mean.. samsung made it!!
So i bought the s-view cover for my s4 mini and i really like it!
Its one accesory i actually think is worth buying for 35 euro's
Only thing i miss about it is the fact that you cant customize the s-view area (yet..)
Anyone else here bought the cover? I would like to hear all your thoughts about it
cheers
Ruppss said:
So i bought the s-view cover for my s4 mini and i really like it!
Its one accesory i actually think is worth buying for 35 euro's
Only thing i miss about it is the fact that you cant customize the s-view area (yet..)
Anyone else here bought the cover? I would like to hear all your thoughts about it
cheers
Click to expand...
Click to collapse
I'm thinking about buying one too, did you buy it online or in a store?
Well, there is one customization if you hare root and listen to music with poweramp:
http://forum.xda-developers.com/showthread.php?t=2368665
charliebigpot said:
I'm thinking about buying one too, did you buy it online or in a store?
Well, there is one customization if you hare root and listen to music with poweramp:
http://forum.xda-developers.com/showthread.php?t=2368665
Click to expand...
Click to collapse
i bought it online
Ah too bad i use spotify instead of poweramp...
but someday there will be something xD
kist32 said:
ROCK Galaxy S4 mini S-View Flip Cover Folio Case
Click to expand...
Click to collapse
This case's cover doesn't stay closed unless placed face-down. Same issue with the manufacturer's hard cover case with flip cover as well.
I bought it from a UK seller off eBay for the equivalent of $50...and I'm returning it. The convenience of the window is far outweighed by the annoyance of having to fold it back to hold it comfortably (and even then, still being uncomfortable for one-handed use) - which also causes it to not stay flat later as a result - as well as the fact that it makes the phone a decent amount thicker/bulkier. IMO flip covers work better for tablets, where the weight of the actual cover keeps it down, and the cover can double as a kickstand.
I ordered two slim snap-on cases in its place, and until then, I'm not having any trouble or worry using it without anything - it's such a joy to hold and keep in my pocket compared to the HTC One I had previously.
I personally am using a Mercury Goosperry flip case. It has a magnetic lock to hold the flip cover down.
They're made by a Korean company and comes in many colour combinations.
Could anyone please tell me if the S View flip cover works for the dual sim version GT-I9192 ?
I have found S View covers on ebay but they only refer to the GT-I9190 and GT-I9195 versions.
They should be the same dimensions but its at your own risk!
Will it make the phone bulky..???
Ruppss said:
So i bought the s-view cover for my s4 mini and i really like it!
Its one accesory i actually think is worth buying for 35 euro's
Only thing i miss about it is the fact that you cant customize the s-view area (yet..)
Anyone else here bought the cover? I would like to hear all your thoughts about it
cheers
Click to expand...
Click to collapse
Hi....
I just want to know one thing...Will the flip cover add any bulk to the phone even at a small amount...or is it exactly has the dimensions of the phone without flip cover...??
Awaiting your reply...
Confirmation for GT-i9192
van9759 said:
Could anyone please tell me if the S View flip cover works for the dual sim version GT-I9192 ?
I have found S View covers on ebay but they only refer to the GT-I9190 and GT-I9195 versions.
Click to expand...
Click to collapse
I finally bought the Samsung Galaxy S4 Mini VIEW Slim Essential case from en.puro.com
and I can confirm that the S View function is working on the S4 mini duos GT-i9192.
Very good quality with good protection as a case.
I am case crazy and I have the S View case along with other cases. The S view area cannot be customized. I also wanted that feature though but that I think is on the LG G2
guys plz help..i m unable pick up the call in s-view window
Please tell if u r facing same problem...i bought a sview cover but not able to recieve call in s-view windows
please help
hey all...
I am looking for a flip cover with sview feature.
I was going to buy the original one but considering that my girlfriend (the owner of the s4 mini) is not really good in taking care of her stuff, i was looking for a way to protect also the back cover.
I mean: is there something like this: http://www.spigen.com/galaxy-s4-case-flip-mate.html but made for s4 mini?
alternatively, has someone tested a reliable flip cover with sview feature that protects also the back of the phone?
Thanks in advance
Andrea
skifalterkin said:
hey all...
I am looking for a flip cover with sview feature.
I was going to buy the original one but considering that my girlfriend (the owner of the s4 mini) is not really good in taking care of her stuff, i was looking for a way to protect also the back cover.
I mean: is there something like this: http://www.spigen.com/galaxy-s4-case-flip-mate.html but made for s4 mini?
alternatively, has someone tested a reliable flip cover with sview feature that protects also the back of the phone?
Thanks in advance
Andrea
Click to expand...
Click to collapse
I use a jammylizard s-veiw case from play.com £4.95 protects all round including the back.
Sent from my GT-I9195 using XDA Premium 4 mobile app
Ezylife said:
I use a jammylizard s-veiw case from play.com £4.95 protects all round including the back.
Sent from my GT-I9195 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
unfortunately i cannot buy jammylizard products here in italy.
Those covers look perfect for the purpose..
I'll manage to find a way..
Thanks anyway
Whosat said:
I personally am using a Mercury Goosperry flip case. It has a magnetic lock to hold the flip cover down.
They're made by a Korean company and comes in many colour combinations.
Click to expand...
Click to collapse
I'm using a Mercury Goosperry flip case too. It looks good on my s4 mini
Sent from my SM-T211 using xda app-developers app
I'm using one of these http://www.ebay.co.uk/itm/Flip-S-View-Leather-Stand-Case-Cover-For-Samsung-Galaxy-S4-Mini-i9190-Film-/151106958666?pt=UK_MobilePhones_MobilePhonesCasesPouches&var=450200604234&hash=item232ead354a The S View works great and it protects the phone very well and also stays closed. Very easy to put on and take off.
Rew64 said:
I'm using one of these ...
Click to expand...
Click to collapse
Hi, S-View notification is always on when wearing this cover, or goes blank (standby) after a while? Thank you!
Using Flip S View Leather Stand Case Cover For Samsung Galaxy S4 Mini + Film & Stylus Black version. Not really like in pictures but it`s ok for the price My opinion much better protection then original s-view and much more cheaper
aleripe said:
Hi, S-View notification is always on when wearing this cover, or goes blank (standby) after a while? Thank you!
Click to expand...
Click to collapse
Goes black after ~5s . It will show again if u press power button or home button ( harder to press )
aleripe said:
Hi, S-View notification is always on when wearing this cover, or goes blank (standby) after a while? Thank you!
Click to expand...
Click to collapse
When you close the case the S-View notification stays on for about 8 seconds then goes to sleep. If you want to see the time you justs squeeze the bottom over the home button then it comes back on. When you open it it goes straight to the home screen. If some one calls it comes on and displays the name.
Dear S4 Mini users,
Today I bought a Samsung Galaxy S4 mini. I also bought a original Samsung Flip Cover. The Android software is original and everything is up-to-date. B
But I have a problem, when I put the Flip Cover over the phone, it doesn't turn my screen off. I have the same problem, when I open the Flip Cover, then my screen doesn't go on. Does anyone knows why it doesn't work? I tried every little thing!
I really hope that my new phone isn't already damaged.
Regards,
Erik
NoobfromtheLegends said:
Dear S4 Mini users,
Today I bought a Samsung Galaxy S4 mini. I also bought a original Samsung Flip Cover. The Android software is original and everything is up-to-date. B
But I have a problem, when I put the Flip Cover over the phone, it doesn't turn my screen off. I have the same problem, when I open the Flip Cover, then my screen doesn't go on. Does anyone knows why it doesn't work? I tried every little thing!
I really hope that my new phone isn't already damaged.
Regards,
Erik
Click to expand...
Click to collapse
What version of S4 mini u got and what version of Flip cover ? with window or without ?
Also is Apps -> Settings -> My Device -> Accessory -> Automatic Unlock "ticked" ?
I have S4mini duos I9192 with Samsung I9190（GALAXY SIV Mini）V-series Leather Case and works ok
SilviuMik said:
What version of S4 mini u got and what version of Flip cover ? with window or without ?
Also is Apps -> Settings -> My Device -> Accessory -> Automatic Unlock "ticked" ?
I have S4mini duos I9192 with Samsung I9190（GALAXY SIV Mini）V-series Leather Case and works ok
Click to expand...
Click to collapse
Thank you for your fast respond. I have a Samsung S4 Mini GT-I9195 and automatic Unlock is 'ticked'. I have a Samsung original Galaxy S4 mini Flip Cover without window. I hope that you can see the pictures.
NoobfromtheLegends said:
Thank you for your fast respond. I have a Samsung S4 Mini GT-I9195 and automatic Unlock is 'ticked'. I have a Samsung original Galaxy S4 mini Flip Cover. I hope that you can see the pictures.
Click to expand...
Click to collapse
Odd i don`t know the behaviour of flip cover without window if it should unlock the screen or not. S-view cases does have a small magnet inside on left/middleish of flip part that triggers a sensor inside the phone. Can u check with a metal screwdriver or so on your flip cover to see if the magnet is there ? ( no clue if u have one or not )
SilviuMik said:
Odd i don`t know the behaviour of flip cover without window if it should unlock the screen or not. S-view cases does have a small magnet inside on left/middleish of flip part that triggers a sensor inside the phone. Can u check with a metal screwdriver or so on your flip cover to see if the magnet is there ? ( no clue if u have one or not )
Click to expand...
Click to collapse
Thank you again for a really fast and useful answer. I tried what you suggested and i believe that the cover doesn't have a magnet. So that's the reason that it doesn't work?
Just bad luck. I hope that i can change it the shop.
Really thanks for your help!
NoobfromtheLegends said:
Thank you again for a really fast and useful answer. I tried what you suggested and i believe that the cover doesn't have a magnet. So that's the reason that it doesn't work?
Just bad luck. I hope that i can change it the shop.
Really thanks for your help!
Click to expand...
Click to collapse
As i said, i don`t know how Flip covers should work ( the ones without window ).. Maybe someone else with a flip cover can come by and answer
But as a personal recomandation, if u can change your flip cover at the shop for a window one, u will be more happy ( u can answer calls without opening the flip, u can see time/date/notifications )
https://www.youtube.com/watch?v=ja8gRbK5n_Q if i look at this video the screen does not turn off/on with the cover so it means normal flip cover does not have any magnet to do the trick
---------- Post added at 09:31 PM ---------- Previous post was at 09:20 PM ----------
And also u can look at Galaxy S4 Mini Smart View Cases
The Nillkin one is more "elegant" and slim BUT it have 2 flaws
- the magnet holding the flip toghether is not so strong
- the screen is positioned 2 mm too down and u don`t see the battery/signal thru the window
The Jammylizard one is a little more bulky, bo problems with screen BUT it does have a small problem with the cut for USB part. The original samsung cable does not fit all the way in, u must cut a little from the case plastic The magnet is verry strong here keeping the case closed
I prefer those 2 over original because they are much more cheaper and they protect all sides of the phone not like original that u change back cover
I first had the jammylizard one now the Nillkin and i like Nillkin more