Develop Bugs

[Q] Samsung case different from website photo!

The official sammy case I got has the camera slot near the wedge, and yet the photos on their website have it the other way round! What's going on??
The bookcase I received, has the camera slot on the inner wedge (photos below), and it causes two problems. i) the tablet is turned 180 degrees in the 'typing mode' (shallow support) and some programs like Youtube can't do a 180 degrees turnover, and ii) when you close the bookcase, the short magnetic clip does not cover the camera when closed, thus the camera is exposed.
http://www.flickr.com/photos/[email protected]/5907483311/
http://www.flickr.com/photos/[email protected]/5907483363/
Yet, when you look their photos for the bookcase, it shows the camera slot on the far side, thus the tablet would not be upside down in 'typing mode' and the clip covers the camera slot.
http://www.samsung.com/us/mobile/galaxy-tab-accessories/EFC-1B1NBEBSTD-gallery
(select "view larger" on the lower right side to see the position of the different camera slot)
http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1B1NBEBSTD
Can it be that the bookcase I received, which had the part number EFC-1B1NBEGSTA is different from the one on display which has the part number EFC-1B1NBEBSTD ?? But Sammy didn't say anything about different models, and I for one, would prefer the camera slot on the far side. Did you all receive the bookcases like mine, or did anyone receive bookcases like the one on their website? Did anyone actually receive a bookcase that looks like the gallery one (STD) rather than mine (STA) ??

I've got the same one as you. My guess would be that the pictures on Samsung's website are of what the case was going to look like originally.
Sent from my GT-P7510 using XDA Premium App

lemonyellowblack said:
I've got the same one as you. My guess would be that the pictures on Samsung's website are of what the case was going to look like originally.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
Ditto here. I also figured that the display model was an earlier pre-production model that was changed.
As far as the OP's concerns, while it would be nice to have the camera covered I don't think it's that big a deal. Allowing the camera to be recessed should protect it from most wear and tear as compared to what my caseless Evo has endured with its raised camera.

Just a photosop fail on their part

I just found this Samsung book cover case with a slightly different model number over at tigerdirect.com. It shows the rear facing camera lens hole on the opposite end from the model you received (same pictures that were on the Sammy website). Has anyone purchased this model and is the camera location different? I noticed the different model number and was actually worried about ordering from Tiger Direct in fear that it was an older model or something (version 1.0).
Samsung's website model: EFC-1B1NBEBSTD
Tiger Direct's model: EFC-1B1NBECXAR
Sorry I can't post links yet, you will have to search on google for "samsung galaxy tab 10.1 book cover case" and the top listing under shopping should be the tiger direct link.

The product id of the book cover case I bought from Samsung a couple of weeks ago was EFC-1B1NBEGSTA. Now when you put that product in your shopping cart it comes up as EFC-1B1NBEBSTD. I wonder if this new product id signifies a modified book cover case with the camera hole in the other position...

Noticed this as well but I thought it wasn't that big of a deal to post - It's not the first time Samsung messes up photoshop on their own website.

Most of the pictures on Samsung's site are photoshop fails.
http://www.samsung.com/us/mobile/cell-phones-accessories/ECR-D1A3BEGSTA-gallery
1st and 2nd pictures are contradictive (USB port is on the bottom of the phone)

aptmowe said:
The product id of the book cover case I bought from Samsung a couple of weeks ago was EFC-1B1NBEGSTA. Now when you put that product in your shopping cart it comes up as EFC-1B1NBEBSTD. I wonder if this new product id signifies a modified book cover case with the camera hole in the other position...
Click to expand...
Click to collapse
There have been 3 totally different part numbers for this case so far. So far 2 of the 3 photos have been posted in various threads and they are identical.

Well, I wouldn't mind a bookcase that looks like the one on the site, rather than the one I have ... Will keep an eye out to see if different versions actually come out, in the US or elsewhere.
I have to say, even the cnet gallery here shows the GT10 in an upright position when the bookcase is set to typing mode. Unless they deliberately took it out and turned it upside down, this photo would also support the notion that there is a Sammy bookcase that has the camera slot cut out on the far side rather than near the binding ...
http://reviews.cnet.com/2300-3126_7-10008260-13.html?s=0&o=10008260&tag=mncol;page

Jnn1 said:
Well, I wouldn't mind a bookcase that looks like the one on the site, rather than the one I have ... Will keep an eye out to see if different versions actually come out, in the US or elsewhere.
I have to say, even the cnet gallery here shows the GT10 in an upright position when the bookcase is set to typing mode. Unless they deliberately took it out and turned it upside down, this photo would also support the notion that there is a Sammy bookcase that has the camera slot cut out on the far side rather than near the binding ...
http://reviews.cnet.com/2300-3126_7-10008260-13.html?s=0&o=10008260&tag=mncol;page
Click to expand...
Click to collapse
There is only one version of the case. You can tell CNET deliberately placed the Tab in the case upside down, since the cut-out for the headphone jack is on the bottom.

My bet would be a last minute redesign so that the head phone jack would not be covered. When on the go, it is probably the only port you want to make sure is not covered.
Samsung should have updated their site to reflect that though.

Good point about the headphone jack....
When I got this case I was really disappointed in design.. I like the materials and build.... The case just feels like it is backwards. I decided to put my tab in the opposite way... I will likely never use the camera, and Its covered up by the case when you open it all the way.
The only way to use the camera with the case is to hold the tab upside down and let the cover hang.. Just silly. You will fumble around with it for sure the first time you try to take a pic with this case on - trying to figure out what way to hold it so the camera is not blocked by case.

jbruns said:
Good point about the headphone jack....
When I got this case I was really disappointed in design.. I like the materials and build.... The case just feels like it is backwards. I decided to put my tab in the opposite way... I will likely never use the camera, and Its covered up by the case when you open it all the way.
The only way to use the camera with the case is to hold the tab upside down and let the cover hang.. Just silly. You will fumble around with it for sure the first time you try to take a pic with this case on - trying to figure out what way to hold it so the camera is not blocked by case.
Click to expand...
Click to collapse
Like you said, I would rarely use the camera but messing with it in the case I simply hold it at the top with the fingers of my left hand holding the cover up and my palm on the top left of the tab. Annoying but works fine since it's so lite.
They should have made it with a removable top (cover). They could have had the 2 pieces slide together with a plastic hinge of some sort. Or maybe some heavy velcro.

or just made a smart cover like the ipad

Ok, so the Samsung website has it listed as a leather case... and the pics in this post look like the outside flap may be leather... mine is plastic and nylon and only the inside flap that touches the screen is leather. Is everybody else's like that?
Sent from my GT-I9100 using XDA App

daddymatt said:
Ok, so the Samsung website has it listed as a leather case... and the pics in this post look like the outside flap may be leather... mine is plastic and nylon and only the inside flap that touches the screen is leather. Is everybody else's like that?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
It's plastic. There is no other version. Samsung's photos are wrong as is their description. You would think the actual manufacturer would get it right or at least after 2 months fix it.

Easecase E5 review

Just a very quick review of my Easecase E5 which arrived about a week ago.
You can see pictures of it by search eBay for "Easecase E5 galaxy note" (without quotes), there's one here : http://www.ebay.co.uk/itm/E5-EASECA..._MobilePhonesCasesPouches&hash=item5ae4059699
(I did get a bit of a shock when I saw that - that is my actual one - with my name on it, I was just searching for one at random)
Delivery time:
As mentioned in other parts of this forum, delivery times for Easecase are pretty woeful. I ordered on the 25th of November and, it arrived here a few days over a month later in Sweden. The problem seems to be largely that they ship via China Post which is quit slow - they dispatched it (with trackable* shipping) within about a week. I bought it through eBay, so I am not sure if they have another outlet, and, they make it very clear on their eBay items that they will take a looong time to ship, so, I can't take any points off them there.
Build quality:
It is beautifully put together. There's a slot running down the inner spine for the stylus, and my name is embossed on the front. I would characterise it as high quality.
Outside:
I opted for the magnetic clasp. It isn't a very strong magnet, but does the job.
Apart from the clasp, there's just the embossing on the outside, and, a neat seam around the edge.
Inside:
There are 2 bill pockets inside, both of which are *very* deep. They're about as deep as the note is high.
When it is fully opened, there are 5 credit card pockets on the left. Note that these seem to be individual pockets, separated from each other internally. Cards fit vertically into these pockets. The front of the pockets stretches a bit over 2 thirds of the way from the far left of the case to the spine. Behind the pockets is a sleeve about 1/3 wider than the short side of a credit card where you could fold bank notes* (remember this, I'll come back to it.
As I said, along the inner spine is slot for the stylus.
On the right is where the not goes. It slots in (quite snugly) from the top. The top is open, so you can get to the headphone port. There's a hole in the left for the volume control, a hole in the right for the power button, and, a hole in the bottom for access to the USB port.
Looking at the front, the home and hardware buttons are all accessible as part of the screen area. They've also neatly cut out around the top speaker and, the front camera.
Protection:
Very good. If the magnetic clasp doesn't come undone during a fall, then, it'd be very hard to break the screen. It is nice thick leather, and you might even be able to drop a brick on it when closed without breaking the screen.
It still won't help you if you drop it in the toilet as some poor chap here has apparently done.
Usage:
It is very bulky. Like one of those filofax jobs people used to (still?) have.
I'm used to big gadgets, so I cope, but you wouldn't get it into tight jeans pockets. I do squeeze it, with some discomfort into my front trousers pocket.
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
Using the rear camera requires removing from the cover.
General browsing/emailing etc is fine with the cover on.
Fortunately removing the phone is a fairly quick procedure, as is putting it back it. I imagine it'll get easier still as the leather stretches a touch.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Summary/thoughts:
I wish I'd bought the one without the bank note pockets. That'd reduce the bulk considerably and you could still stick notes behind your cards (see * above). You can also use the rear facing camera with the non-bank note version (E4).
On balance, I am pleased I bought it though, it is of high quality and, it is great having your phone and wallet all in the one thing - it also means you can ring your wallet to find it when you are in a hurry to head to work
If anyone has any questions, I'd be happy to answer them.
My recommendation for anyone thinking of getting one of these is to get the E4 and not this.
They don't seem to have any E4's on eBay at the moment for the note, but I am sure I have seen one there. Here's one for the Desire HD - I am sure it gets the point across.
http://www.ebay.co.uk/itm/E4-EASECA...sesPouches&hash=item5647be7cbf#ht_5657wt_1016
Cheers,
Kent

kentmartin said:
You don't want to talk on the phone with the cover on for more than brief calls, you look like an idiot. Most of the time I pull it out of the cover for calls, or, use a bluetooth headset.
One annoyance is, as the leather reaches right to the top of the touch screen, if the phone slips up slightly, it can be difficult or impossible to pull down the notifications bar. When in landscape, this isn't an issue as the phone can't move left/right in the case.
Click to expand...
Click to collapse
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
- Frank

ChodTheWacko said:
Two quick thoughts:
1) When calling, can't you fold the case cover back 180 degrees?
Click to expand...
Click to collapse
No, the banknotes pockets kind of open so it gets more bulky and wants to spring back to about 180 degrees (where 0 is closed, 180 is wide open and 360 is the position you suggest), but I suspect you could with the E4 model.
2) Some launchers (adwlauncher does this) allow to swipe down anywhere to lower the notification bar, so you don't need to touch the very top.
Click to expand...
Click to collapse
Yes - I read about that setting a while back, but have never used it, thanks for reminding me - it is now enabled for the swipe down gesture (hide dock was annoying me anyway).

Hi, thanks for the review, i've been stuck deciding between the E5 and the E4, due to the E5 having the bill slot, which i would think is really good compared to folding the bills under the cards.
Can you take a picture of the case when it's fully loaded, both open and closed?
e.g. all card slots used, and the bills folded and slotted under the cards
That would probably help sway my decision, if that slot + cards do not bulk up the entire wallet.

More info // pics in my thread. http://forum.xda-developers.com/showthread.php?t=1419678

I love those case, but it's sucks when they cost so much!
It's should be 10$ max.

peanuts and monkeys
i hope to order this case by the end of this month, i've emailed them some questions on customisation, hopefully it's permitted, then can go forward with this.

the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.

EvoFighter said:
the E5 with wallet style slot is definitely too bulky. I bought one for my Desire HD with modified size to fit the DHD with Otterbox. After receiving it, tested once with DHD and sit in my drawer collecting dust ever since.
Click to expand...
Click to collapse
Ya know I thought the same thing at first, but I just got a pack of 3 extra batteries and I find I can put two of em in the wallet and also a cleaning cloth and everything fits great.

In terms of customizations I wonder if a small bit for some change could be added.

Its beautiful.

Easecase E5 looks good.

This is a genuine leather case, and very good quality construction. They also responded well to my customization request (I wanted a 65mm horizontal belt loop added to mine).
Only $10 max is out of the question. Worth 3 to 4 times that much. It includes branding of your own name as well. It's a very classy leather case/wallet.

Could you please share a photo were the Note is next to the case just to compare the size of the case?

Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?

dreamstealer2045 said:
Hey great review. I really love the customization of these cases and I recently bought a galaxy note us version from ATT so ive been doing some research for a quality wallet type case for my note (will arrive monday) I was just wondering, would this case or the E4 case which is what ill probably get be fine for the american ATT version. Im pretty sure the dimensions are about the same but im not so sure about the button placements or the charger placements.
The only thing I dont like is the shipping time but not much I can do about it but this case seems to be the best so far that ive found besides the vintage leather case but those dont come in black and have magnetic strips.
Any reply would be appreciated.
So just to recap - will my US ATT galaxy Note i717 be a good match with this case?
Click to expand...
Click to collapse
When I dealt with them, I found them quite responsive, I suggest asking them if it'll fit the i717 - odds on if it doesn't they'll have one that does even if they haven't advertised it yet.
Although I haven't seen it, I'd definitely recommend the E4 over the E5 - I find I don't really need the slots for notes (you can slip folded notes in the bit behind where credit cards go anyway) and, it the banknote pockets block the camera (by necessity) which drives me a bit mad.

Getting opinions about Tetrax Fix magnet car holder

Guys, I need your opinion about a magnetic car holder for SGS3.
Is it safe to use the Tetrax Fix magnetic car holder?
I mean, my concern is not only about the phone getting loose due to poor magnetic strenght, but the magnetic field interference with the phone functions.
Has anyone tested it yet?.
It looks pretty cool, as it is very small.
Link:
http://www.amazon.com/Tetrax-Magnetic-SmartPhones-iPhones-Players/dp/B0073X45RQ
Thanks.

I have used them for 6 or 7 months with my Motorola Razr in my car and on my golf trolley.
The system has a magnetic button that fixes to your car with a self adhesive pad, and there is a self adhesive plate to fix to your phone. These come in 3 sizes and I would recommend using the largest due to the weight of the S3
They have worked perfectly well, although my phone has occasionally fallen off the trolley when going over rough ground. I've never had a problem with it in the car.
I am not using it on my S3 because the metal piece that fixes to the phone will not let the S3 sit level on a desk, The Razr has a bulge at the top that I fixed the plate near to, so it was not a problem.

Thanks!

tetrax xway
Hi,
Please consider tetrax xway or fix way of any touch screen device like smgIII.
The x stabilize the unit when using touch screen, tubber for vibration absorption, better magenta strength.
Magnets do no interfere it's a patented opposite pole layout solution, more info here
tetrax.com/support/faq-frequently-asked-questions
thanks

stunno said:
I am not using it on my S3 because the metal piece that fixes to the phone will not let the S3 sit level on a desk, The Razr has a bulge at the top that I fixed the plate near to, so it was not a problem.
Click to expand...
Click to collapse
Thanks for that. The system does look good though, but I don't really want to have a bit stuck on my phone all the time. I'm thinking getting a second battery cover (when they are available!) might be a solution so that I can swap them when needed. Alternatively some kind of quick-snap piece for the phone that the metal part could be stuck to would be quite good.
Sent from my CM9 TouchPad

Isadora said:
Thanks for that. The system does look good though, but I don't really want to have a bit stuck on my phone all the time. I'm thinking getting a second battery cover (when they are available!) might be a solution so that I can swap them when needed. Alternatively some kind of quick-snap piece for the phone that the metal part could be stuck to would be quite good.
Sent from my CM9 TouchPad
Click to expand...
Click to collapse
You can get a replacement battery cover for the S3 here:
http://www.ebay.com/itm/11089202043...AX:IT&_trksid=p3984.m1423.l2649#ht_500wt_1361
My main concerns with the Tetrax holders are:
They clip to vent vanes, whish isn't always the most stable mounting solution.
You cannot rotate them to face the driver, which makes them not ideal for use with GPS.

almightywhacko said:
You can get a replacement battery cover for the S3 here:
http://www.ebay.com/itm/11089202043...AX:IT&_trksid=p3984.m1423.l2649#ht_500wt_1361
My main concerns with the Tetrax holders are:
They clip to vent vanes, whish isn't always the most stable mounting solution.
You cannot rotate them to face the driver, which makes them not ideal for use with GPS.
Click to expand...
Click to collapse
I know about these but I'd rather have one without the big "galaxy SIII" even if it's just for the car and I wouldn't actually see it
I was looking at the Fixway which doesn't clip to the air vent.
Sent from my CM9 TouchPad

FWIW, for the past couple of years I've used an alternative magnetic mount solution from krussell - most recently for the last 12 months with my SGS2
Despite some 'spirited' driving, its always remained perfectly secure.
I was worried about the magnetic field, but have had no such problems.
Its by far the best car mount solution I've ever used.
The magnetic disc is stuck wherever you want, and the thin metal plate is stuck to the back of your phone (or as I have done the back of the case)
http://www.amazon.co.uk/Krusell-Str.../dp/B000ORXUOM/ref=pd_luc_chashrec_02_01_t_lh
Now that I have my SGS3, I've ordered some cheap painted white self adhesive metal strips to attach to the SGS3 case to use with this magnet.
Ignore the poor 1* review from some plum who blames the product because he tried to use it with an ipod with a platter drive in it!

Watch the weight limitations on the FIX...
Isadora said:
I know about these but I'd rather have one without the big "galaxy SIII" even if it's just for the car and I wouldn't actually see it
I was looking at the Fixway which doesn't clip to the air vent.
Sent from my CM9 TouchPad
Click to expand...
Click to collapse
I wanted to get the FIX version as well, but the problem is that it only supports 150 grams or 5.25 ounces, and while the SGS3 by itself weight 4.7 ounces, when I add my Otterbox Defender, it brings it up to 7.4 ounces. So I guess the only options for me are GEO (air vent) or step up to the much pricier XWAY....

ATTENTION Case Producers (Free Case Desing)

Here is my case desing. Is there anyone who can make this case available on the market

i like the idea..

Isn't there anybody who owns or knows someone owns a case manufacture company.
I don't want anything except a sample case.
Sent from my GT-N7000 using Tapatalk 2

I like the design also so here's a bump. BUMP!
I would buy one if someone were to make these.
Noted by Noting from my Noteful Note

dionysos77 said:
Here is my case desing. Is there anyone who can make this case available on the market
Click to expand...
Click to collapse
Great concept, flawed product.
#1- The flap will be loose, so it needs to be secured. Best way is for a Magnet link.
#2- Placing your cards on the outer side means more chance of opportunistic theft
#3- Even adding one credit card will make the case thicker. Its usually not a problem, but since they will be "stacked" the inner side will get thicker in some areas and not in others.
This creates a loose "touch point" of the inside flap and the screen.
(eg/ Apple's Smart Cover, imagine the middle being quite thick and the borders shallow - it wouldn't touch properly).
I do like the idea of combining your phone + wallet into one package, but its not really theesable. Firstly, it will make the NOTE too bulky, and its already stretching out some pockets. Secondly, the amount of storage is low on the package. A wallet will hold more contents.
I personally have a skinny wallet with a ~3 credit cards and half-dozen business cards and ofcourse paper money. I place it in my ass pocket, phone goes alone to front right pocket... I tend to multitask easiest this way.

Would've got this but, I don't like leather and I want a pouch where my phone slides out, not stuck to the case. Also, no room for a usb host cable.
http://www.ebay.com/itm/Genuine-Lea...699739?pt=PDA_Accessories&hash=item2571d6e91b

no one volanteer to produce this case ?

dionysos77 said:
no one volanteer to produce this case ?
Click to expand...
Click to collapse
you need to network with Chinese / European case producers.
Just ring them up
Gonna set up a business?
You can find similar onTaoboa or extremedeals thought. http://www.squidoo.com/extreme-deals-from-china
or in this forumthread, tip use pc browser, to many pages
http://forums.hardwarezone.com.sg/samsung-user-group-136/galaxy-note-accessories-3490829-2.html
Sent from my GT-N7000 using Tapatalk 2

Interesting keyboard case on eBay

So I was browsing for keyboard cases for my Note 10.1 the other day and found this case:
http://www.ebay.com/itm/Slim-Blueto...vers_Keyboard_Folios&var=&hash=item3a844f9c90
Seems interesting because the keyboard is detachable from the case via a magnet on the back of case.
My only concern is that the magnet on the case might mess up the S-Pen. I've had a case with magnets and it indeed interfered with the Note's S-Pen.
Anyway, has anyone heard of this keyboard case?

I'm almost read to order one but the viewing angle looks a little steep?
I did not see any mention of magnets in the description, it's an aluminum case.
.

kkretch said:
I'm almost read to order one but the viewing angle looks a little steep?
I did not see any mention of magnets in the description, it's an aluminum case.
.
Click to expand...
Click to collapse
Hi kkretch,
The case does seem to have a large magnet on the back where the keyboard part is attached to. Which, by the way, is one of the nicest features of this case. You can either choose to use the tablet with the back cover, or attach it to the keyboard (see picture attached).
Now, I'm not sure how it will interfere with the S-Pen. But magnets and the S-Pen don't go well together.
Here's another seller selling the same item with more detailed pictures:
http://www.ebay.com/itm/Ultra-Thin-...vers_Keyboard_Folios&var=&hash=item3385635c0d
And as far as I can tell, the viewing angle is adjustable.
The case seems to be very well built and slim. I might take the risk and order one.
Let me know what you think.

If it is indeed a magnet holding it on I'm going to pass, but if you do get it please tell us how it is.
Did you notice the links have different prices.

Just so you guys know, the s-pen works by radio waves, so magnets should not affect it at all. Until some proof is provided, im going to assume that everyone who says they experienced it is just convincing themselves that they did.
Sent from my Nexus 4 using xda app-developers app

younix258 said:
Just so you guys know, the s-pen works by radio waves, so magnets should not affect it at all. Until some proof is provided, im going to assume that everyone who says they experienced it is just convincing themselves that they did.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
This is not true at all. Wacom digitizers do use magnets, that's why you don't need a stylus with battery in it.
Just grab a magnet and put it near the S-Pen while writing down something and you'll see.

younix258 said:
Just so you guys know, the s-pen works by radio waves, so magnets should not affect it at all. Until some proof is provided, im going to assume that everyone who says they experienced it is just convincing themselves that they did.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I have a case with some magnets attached to it hold the stand and it definitely messes up the s pen in the region of the magnets. If the case is removed, the s pen works fine. There's a lengthy thread on that in of the fora here, you should check that out if you don't believe me.

the wacom digitizer emits an electrical field which allows the spen to function without battery, it does not use RF
I experimented a little
it seems low power magnets had no effect (magnets you would find in most cases)
rare earth magnets however were able to disrupt the spen, and were able to penetrate though the back of the device and cause the spen not to work good aswell
the magnet has to be right on the device or right behind it to have any effect, as soon as it moves an inch-half an inch away it works normally again
I ordered one of those knock off samsung book cover cases which also has magnets in it, so i will see if while opened it has any effect on it

Joey22688 said:
the wacom digitizer emits an electrical field which allows the spen to function without battery, it does not use RF
I experimented a little
it seems low power magnets had no effect (magnets you would find in most cases)
rare earth magnets however were able to disrupt the spen, and were able to penetrate though the back of the device and cause the spen not to work good aswell
the magnet has to be right on the device or right behind it to have any effect, as soon as it moves an inch-half an inch away it works normally again
I ordered one of those knock off samsung book cover cases which also has magnets in it, so i will see if while opened it has any effect on it
Click to expand...
Click to collapse
I see.. Well ive had two cases with magnets in it for several months and no problems so ill back up your claim about only rare metal magnets being strong enough.
Sent from my Nexus 4 using xda app-developers app

younix258 said:
Just so you guys know, the s-pen works by radio waves, so magnets should not affect it at all. Until some proof is provided, im going to assume that everyone who says they experienced it is just convincing themselves that they did.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
My sister had a case with a magnet on her Note 2 and it messed up the S-Pen. Although the S-Pen did return to its original state but it took weeks before it came completely demagnetized.

that's awesome. thanks!

I just bought a note and it came with a no name case. Has magnets that keeps the lid closed. Just two small ones at each upper corner of the case. Havent noticed any interference with it.
I really like that keyboard one, especially since its detachable. Is it possibly to get one with a trackpad? ...like the transformer? Or is that custom Asus firmware allowing it to use the pad?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

Own this case
I bought the case the OP was asking about. I have to say that it is a great fit for me. The magnet on the back that holds the keyboard to the case has caused no issues with my SPen. The case and keyboard are very slim and add very little bulk to the overall feel. The keyboard is aluminum which makes it feel very durable. The only con I can find about this case is that the key strokes are a little misleading. Don't get me wrong, the keyboard works perfectly and hasn't missed a keystroke yet, but since I am used to traditional keyboards, the feel of the keys as I type is throwing me off a little. Nothing that time and use won't solve. I also like that the keyboard is removable and I still have a protective case on the back of the tablet.
Overall, this is the best keyboard/case I have found for the Note 10.1 (2012) for my needs.

burkett1974 said:
I bought the case the OP was asking about. I have to say that it is a great fit for me. The magnet on the back that holds the keyboard to the case has caused no issues with my SPen. The case and keyboard are very slim and add very little bulk to the overall feel. The keyboard is aluminum which makes it feel very durable. The only con I can find about this case is that the key strokes are a little misleading. Don't get me wrong, the keyboard works perfectly and hasn't missed a keystroke yet, but since I am used to traditional keyboards, the feel of the keys as I type is throwing me off a little. Nothing that time and use won't solve. I also like that the keyboard is removable and I still have a protective case on the back of the tablet.
Overall, this is the best keyboard/case I have found for the Note 10.1 (2012) for my needs.
Click to expand...
Click to collapse
Could you post some pics? planing on getting the same keyboard, but not sure cuz when i remove the keyboard the screen will be unprotected
greetings!

e.coyote said:
Could you post some pics? planing on getting the same keyboard, but not sure cuz when i remove the keyboard the screen will be unprotected
greetings!
Click to expand...
Click to collapse
I will try to take some pics when I get back home. Travelling for work at the moment and do not have that case and keyboard on my Note at the moment. I switch it up with the Samsung case and cover as I don't need the keyboard as often the more I use the tablet. Try to get some pics up on Friday though when I get home.
You are correct though, when the keyboard is off, the screen is exposed. I use Invisible Shield to solve that problem.

burkett1974 said:
I will try to take some pics when I get back home. Travelling for work at the moment and do not have that case and keyboard on my Note at the moment. I switch it up with the Samsung case and cover as I don't need the keyboard as often the more I use the tablet. Try to get some pics up on Friday though when I get home.
You are correct though, when the keyboard is off, the screen is exposed. I use Invisible Shield to solve that problem.
Click to expand...
Click to collapse
Thank you Sir