Develop Bugs

[Q] sm-p605 custom roms

HI, can anyone point me in the direction of a good custom rom for the p605? i cant seem to find any that support this model?

http://forum.xda-developers.com/showthread.php?t=2774680
[ROM][SM-P605][XXUCNE2][4.4.2] ★★xKat v3.1★★ (13.06.2014)

recovery help...
droisntns said:
http://forum.xda-developers.com/showthread.php?t=2774680
[ROM][SM-P605][XXUCNE2][4.4.2] ★★xKat v3.1★★ (13.06.2014)
Click to expand...
Click to collapse
Thanks so much for this - I have looked at the how to install the rom but can i ask one question? I tried to install the custom recovery in TWRP which found the device but when installing it ran the TWRP 2.6 and not 2.7.0.1 and when i tried to reboot in recovery i got a bootloop so had to reflash the stock rom. I am not sure if this caused the bootloop but because I dont want to make the same mistake again so can you step me through how to get the recovery ready prior to Intalling the rom in twrp??

first you must be on the 4.4.2 bootloader to flash this rom (flash P605XXUCNE2 with odin) 2 :make a fullwipe 3: flash TWRP 2.7.0.1(LTE) with odin 4: flash xKat v3.1 .The end

Update failed [Help].

Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh

Well, probably its a problem with your boot.img partition. Extract boot.img from stock rom zip, then flash it via fastboot flash boot boot.img and then, flash orginal recovery same as boot. Then, finally, flash via recovery STOCK ROM. Probably now it will be fine.
If not, try flash TWRP and make FULL WIPE included system partition and repeat upper steps.
Cheers.

In twrp goto wipe and do normal wipe remember don't do advance wipe otherwise it'll format internal storage as well so avoid advance wipe only do normal wipe then install full 3.2.7 zip and super su. zip
Sent from my ONEPLUS A3003 using Tapatalk

Mahesh8348 said:
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Click to expand...
Click to collapse
before you flash 3.2.7 mount system read-only. you can do this under "mount"
it is a known bug with twrp and oxygenos
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367

panther124 said:
before you flash 3.2.7 mount system read-only. you can do this under "mount"
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
Click to expand...
Click to collapse
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.

Mahesh8348 said:
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Click to expand...
Click to collapse
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo

panther124 said:
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
Click to expand...
Click to collapse
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .

Mahesh8348 said:
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Click to expand...
Click to collapse
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.

panther124 said:
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
Click to expand...
Click to collapse
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .

Mahesh8348 said:
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Click to expand...
Click to collapse
You should get it automatically

Bootloop after Bootloader Unlock

Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?

Ckp1991 said:
Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?
Click to expand...
Click to collapse
A1. This thread helped me. - http://forum.xda-developers.com/showthread.php?t=2532190.
A2. Yes, flashing stock rom would work even if you haven't installed any backup using CWM or TWRP.
A3. You can still flash CyanogenMod Nightlies directly instead of flashing the stock rom and then flashing CM again.
A4. Newbie here too! so I can't actually Suggest you anything
A5. It is supposed to take 5-10 minutes but even my phone went into bootloop.
What I did :-
> Flashed the old TWRP recovery from flashtool
> Installed CM and GApps
> Wiped Data/Factory Reset
> Rebooted the Device.
And VIOLA! the phone works like a charm!
I've been using the ROM for 2-3 days now and I have no major problems as of yet.
Hope this works out in your favour!
Happy Flashing!

After unlocking bootloader Bootloop is normal. You have to flash stock rom to fix it and also you can also flash any custom recovery(Cwm,Twrp) then flash any custom rom to fix it.
4.3 Indian Stock Rom
Recovery - CWM Philz

I am getting application error on flashtool help

Is my OnePlus 3 bricked ?

Hi,
This morning, i've installed the latest official Cyanogenmod 14.1 ROM with latest official CM Recovery. It's working but I don't like it and I want to reinstall the stock rom but everytime I try to flash the stock recovery, my OP3 don't boot. I always need to reflash the cm recovery. So i tried to flash via the CM recovery the latest official rom from OnePlus Website via sideload but it don't want. I'm OEM Unlocked and I have activate the USB debuging options. But in old versions of CM, we needed to uncheck a setting in Developpers options to flash another recovery but this options is missing in this version.
Can someone help me ?
I've had access to cyanogen if I need to do something in android and all the fastboot/adb commands are responding.

You need to flash the latest twrp from https://www.androidfilehost.com/?fid=385035244224394867 and then you can flash anything you want, don't flash any other twrp, it won't work.
Sent from my ONEPLUS A3003 using Tapatalk

RetroGame500 said:
Hi,
This morning, i've installed the latest official Cyanogenmod 14.1 ROM with latest official CM Recovery. It's working but I don't like it and I want to reinstall the stock rom but everytime I try to flash the stock recovery, my OP3 don't boot. I always need to reflash the cm recovery. So i tried to flash via the CM recovery the latest official rom from OnePlus Website via sideload but it don't want. I'm OEM Unlocked and I have activate the USB debuging options. But in old versions of CM, we needed to uncheck a setting in Developpers options to flash another recovery but this options is missing in this version.
Can someone help me ?
I've had access to cyanogen if I need to do something in android and all the fastboot/adb commands are responding.
Click to expand...
Click to collapse
another thing you can do is install oss from the link below, its the official link and it replaces the recovery with stock recovery (atleast in case of twrp) and if you want to stay with twrp you can install the modified twrp.
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.6/

Thanks guys for this help ! I've done my sideload via TWRP and it's fonctionnal. Have a nice day !

RetroGame500 said:
Thanks guys for this help ! I've done my sideload via TWRP and it's fonctionnal. Have a nice day !
Click to expand...
Click to collapse
You're welcome; thank you for letting as know you solved the problem.
Sent from my ONEPLUS A3003 using Tapatalk

Goes back to stock recovery

Hi Guys !
Im on Open beta 35 (OP3). I Unclocked the bootloader and flashed the Official TWRP recovery right after that I could able go to TWRP but after I restart the Phone again it goes back to stock recovery. Can someone let me know the what went wrong?
Do I need to flash the blu spark's TWRP?

werty733 said:
Hi Guys !
Im on Open beta 35 (OP3). I Unclocked the bootloader and flashed the Official TWRP recovery right after that I could able go to TWRP but after I restart the Phone again it goes back to stock recovery. Can someone let me know the what went wrong?
Do I need to flash the blu spark's TWRP?
Click to expand...
Click to collapse
You have to flash Magisk, if you are on Oreo, immediately after flashing TWRP before booting into system.
If you are on previous android versions, you can flash SuperSU or Magisk.