Develop Bugs

I can't reflash stock recovery

Hi, yestarday I flashed CM 14 with TWRP to try it, and today I have tried to return to stock rom & recovery but I can't do it. At the beginning I have tried to flash stock recovery that I have downloaded from op.net with fastboot and I couldn't do it and after I have tried to do the same process but this time flash it with TWRP and also this time I couldn't able to fix it. In fine I have installed the stock ROM via TWRP and I managed to install it but now the problem is that I still can not install the stock recovery and accordingly I can't install op3 update.
An another problem is that I have tried to re-lock OEM from fastboot and when I try to turn on the phone, is asks me a pin to enable it and I don't know that pin because I haven't set no one

ICosmin said:
Hi, yestarday I flashed CM 14 with TWRP to try it, and today I have tried to return to stock rom & recovery but I can't do it. At the beginning I have tried to flash stock recovery that I have downloaded from op.net with fastboot and I couldn't do it and after I have tried to do the same process but this time flash it with TWRP and also this time I couldn't able to fix it. In fine I have installed the stock ROM via TWRP and I managed to install it but now the problem is that I still can not install the stock recovery and accordingly I can't install op3 update.
An another problem is that I have tried to re-lock OEM from fastboot and when I try to turn on the phone, is asks me a pin to enable it and I don't know that pin because I haven't set no one
Click to expand...
Click to collapse
Need to download custom twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then use flashify to flash recovery

cbendixe84 said:
Need to download custom twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then use flashify to flash recovery
Click to expand...
Click to collapse
i have already flashed twrp 3.0.2.2 but now I would flash stock recovery but when I try to install it and turn into it op3 show me only op logo and after a few seconds the screen become black.

your phone is bricked I'm assuming. there is a thread for that. that should work for you!

sahed01 said:
your phone is bricked I'm assuming. there is a thread for that. that should work for you!
Click to expand...
Click to collapse
No it isn't. Because I managed to put stock ROM into it via adb with push command and after I have installed it from twrp that works. My only problem is that i can't flash stock recovery.

i have the same issue. Tried many times but i'm getting a black screen after one plus logo for both stck recovery and unmodified twrp. only moidified twrp is working. please let me know if u find a way to resolve this.
thanks in advance

varmasagiraju said:
i have the same issue. Tried many times but i'm getting a black screen after one plus logo for both stck recovery and unmodified twrp. only moidified twrp is working. please let me know if u find a way to resolve this.
thanks in advance
Click to expand...
Click to collapse
I downloaded the stock rom and inside it(stock rom.zip) i put the stock recovery after I reflashed the stock rom via adb from twrp and in fine I locked bootloader.

ICosmin said:
I downloaded the stock rom and inside it(stock rom.zip) i put the stock recovery after I reflashed the stock rom via adb from twrp and in fine I locked bootloader.
Click to expand...
Click to collapse
you can reboot in to stock recovery without any issues?? I think I should give it a try. And you are saying the bootloader is locked again ?

varmasagiraju said:
you can reboot in to stock recovery without any issues?? I think I should give it a try. And you are saying the bootloader is locked again ?
Click to expand...
Click to collapse
Yes, I manage to reboot into stock recovery and i relocked bootloader(you needn't relock bootloader if you do not want)

ICosmin said:
Yes, I manage to reboot into stock recovery and i relocked bootloader(you needn't relock bootloader if you do not want)
Click to expand...
Click to collapse
Great. Can I place the file in beta8 rom .zip file and flash it using adb ??

If this procedure doesn't you can download an older version of oxygen os and update it via ota. At the first attempt when you will try it will give you an error and at the second attempt It will download all the ROM again and it will reflash by itself

varmasagiraju said:
Great. Can I place the file in beta8 rom .zip file and flash it using adb ??
Click to expand...
Click to collapse
I suggest you to try at the beginning with the beta 7 because if that procedure not work for you, you can't downgrade to beta 7.

ICosmin said:
I suggest you to try at the beginning with the beta 7 because if that procedure not work for you, you can't downgrade to beta 7.
Click to expand...
Click to collapse
Thank you.
Will let you know if it worked.

I had that problem.
Solution as follows, worked everytime for me: (I have not tried this method with the newest beta 8)
1. Flash OOS 3.2.6 firmware in twrp.
2. Reboot to fastboot and flash official oxygen os recovery downloaded from the OnePlus website. (This is still the old version for some reason, thus why it won't work)
3. Side load community build with oxygen os recovery, this will flash the new firmware back and update the recovery to be community build compatible.
4. Before rebooting erase everything (factory restore)
5. Reboot to OOS, finish setting up.
6. Turn on advance reboot in developer settings.
7. Reboot to recovery via the reboot menu. First time boot into the recovery may take sometime, but it has always worked for me.
8. After everything looks good, go ahead and OEM lock in fastboot, recovery should work as usual this time and format your phone

OP did you find a solution to this?? Im on the same boat as you

couldn't boot to twrp recovery after flashing cm14

hi'
i have flashed cm14 nightly with aroma (gapps) on cm13 on my oneplus 3
now i couldn't go neither to recovery mode nor to current cm 14 rom to change my rom
i am out of ideas i tried in every possible way to my knowledge pleasee help me ........................

Flash the modified twrp 3.0.2-22 via fastboot.

Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img

I had the same problem. Flashing modified twrp worked for me, thanks! But now if I to flash stock recovery (to install otas), I can't boot to recovery. E: oxygenos otas can be installed with twrp, so no problem anymore

plz send me the link of modified twrp
i coudnt find it on google properly plz

Try the link given by Demian3112. It works

THQ thq soon much.. Its working
Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Yes its working
Thank q very much

THQ thq soon much.. Its working
AJay27 said:
Try the link given by Demian3112. It works
Click to expand...
Click to collapse
THQ for ur valuable suggestion
My killer is back

Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Hii,
Still the problem remains same I will explain in detail
I am back to cm14.1 when I flashed twrp from the above link
When I tried to flash some other ROMs they are flashed but screen goes blank after oneplus boot animation,
If I flash 14.1 ROM it is working fine
From cmd non of the recovery where flashed only the above is working
Plz help me
I want to go back to stock soon

It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.

sanjumalik720 said:
It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.
Click to expand...
Click to collapse
ohhh
then what is the solution ?????

Thank you very much
Demian3112 said:
Get modified twrp here i assume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
I had the same problem as OP, got stuck with the CM 14 and did not like it (to early, to many bugs)
Wanted to go back to CM 13 but was unable to get into TWRP, and unable to flash CM13 back. Tried with fastboot and adb sideload, nothing worked.
The modified TWRP let me do i full wipe of the phone, (wiped Data, Dalik/ART, and system.) then copied the CM13 Stable release from here onto the phone, together with Gapps, and now everything is back to normal.
Again thank you, and thanks XDA! Somehow you always manage to save my ass after i messed with my device

Balaji Dasari said:
ohhh
then what is the solution ?????
Click to expand...
Click to collapse
Just flash the twrp image file again. The one you used before. Just flash it again. The same way you did back then.

OnePlus 3 broken? - Only booting in Recovery

Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready

GrayGhost93 said:
Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready
Click to expand...
Click to collapse
Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.

Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Sorry my English...

Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.

Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.
Click to expand...
Click to collapse
Did it, but same issue...
Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Click to expand...
Click to collapse
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.
Click to expand...
Click to collapse
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!

GrayGhost93 said:
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Click to expand...
Click to collapse
Download the official recovery here:
http://oneplusroms.s3.amazonaws.com...694615&Signature=1Momnxm8gHWw03D401Oof5YxnE4=
What is the exact output if you do
Code:
fastboot flash recovery recovery_OBT7.img
OOS4 is the stable release. I would strongly recommend it over cm right now. It's actually quite polished.
You can download the official full zip here:
http://otafsc.h2os.com/patch/amazon...en_16_OTA_035_all_1612310359_e10cadfb2af7.zip

GrayGhost93 said:
Did it, but same issue...
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!
Click to expand...
Click to collapse
Flash TWRP 3.0.2-22 (download available in other questions. Wait a bit will link it.
Edit: https://forum.xda-developers.com/attachment.php?attachmentid=3971072&d=1481920669 )
See if you can boot into recovery. If you can. Flash whatever rom you have or nandroid backup.
Also are you sure you're using the correct modem and firmware version? Download those recommended in the rom you're using and flash those along with the rom.
http://forum.xda-developers.com/one...dem-collection-flashable-zips-t3468628/page23
Recently I couldn't boot after flashing different firmware, same with different rom without its firmware and modem.

[RECOVERY][P905][UNOFFICIAL] twrp 3.2.2-0

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This recovery was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
Instructions
Install zip using an existing custom recovery
Work
Everything works as in the original version + otg and mtp.
Links
2. 20180708: 3.2.2-0 version:
from recovery: https://drive.google.com/file/d/1v5KlNFjaQqpyml7TotbleIvsGhITyYFk/view?usp=sharing
from odin: https://drive.google.com/file/d/1RMqFJ7uXVwttxu5dmYarQLcAi56g2seh/view?usp=sharing
1. 20171006: 3.1.1-0: https://drive.google.com/file/d/0B-6nm7Jks0W5MHlwTUxlUDFiOWc/view?usp=sharing
Sources
TWRP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Device: twrp branch: https://github.com/Valera1978/android_device_samsung_viennalte

i m on official twrp and i m not able to install magisk (image cant get compressed to size of 10mb boot, always 10.4)
will this inofficial twrp build help to get magisk installed

Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This frecovery was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
Instructions
Install zip using an existing custom recovery
Work
Everything works as in the original version + otg and mtp.
Links
1. 20171006: 3.1.1-0: https://drive.google.com/file/d/0B-6nm7Jks0W5MHlwTUxlUDFiOWc/view?usp=sharing
Sources
TWRP: https://github.com/omnirom/android_bootable_recovery
Kernel: https://github.com/Valera1978/android_kernel_samsung_lt03lte
Click to expand...
Click to collapse
For some reason this recovery causes facebook and facebook messenger apps to continuously crash over and over, other than that so far everything is great!

@Valera1978
Amazing! Thanks for sharing with us!

@Valera1978
Sooooooo cool! :good:
....and.....while not using F*ckbook, I don't care about crashing messengers and so on. :evel:

I installed this recovery and everything is ok except when trying to restore modem
I backed up my system to install official firmware to test some stuff
Then i reinstalled the recovery and tried to restore my backup but it was failing when restoring the modem
I deselected the modem and restored everything else and all ok

Same here. Failing restoring the modem.

The latest official Version doesn't work either (crash):
twrp-3.2.1-0-viennaltexx
The latest working version for my p905 is:
twrp-3.0.2-0-viennaltexx
https://twrp.me/samsung/samsunggalaxynotepro122qcom.html

i flashed twrp recovery sucessfully thru odin..but when i tried to boot to recovery it's still stock firmware recovery not twrp recovery please help

The bootloader is unlooked?
Could you start into the bootloader?
If yes, you can flash the recovery via fastboot

after five times I have managed
My big problem now is how do I activate HDMi?
have a MHL cable micro usb to HDMi when I plug it in nothing happens

Thanks a lot for this TWRP 3.2.2-0 it works nice with SM-P905, and Valera1978 Android 9 Pie ROM.
Easy install, Valera1978 TWRP 3.2.2-0 img from Official TWRP 3.0.2-0 viennalte.
Format f2fs, And latest magisk

risant said:
i flashed twrp recovery sucessfully thru odin..but when i tried to boot to recovery it's still stock firmware recovery not twrp recovery please help
Click to expand...
Click to collapse
Successfully TWRP flash thru Odin, observe the progress in Odin left bottom corner and prepare for this; "directly" when flash finished "force recovery start" (volume up home and startbutton until recovery starts)
Not fast enough" stock recovery autorestore ! Doitagain.

About bootloader (4.4.2 KK)
Hi,
I've just got a SM-P905 on 4.4.2 kitkat (stock). I'd like to flash one of your ROM (probably the LOS 17.1) and this recovery first.
Should I just flash it through Odin or do I need to unlock the bootloader? In that case, could you please drive me to a tutorial? I've searched a lot on this forum on howto unlock the SM-P905 bootloader (or just if it comes -the 4.4.2 version at least- with an unlocked one already) but I haven't found anything on it.
Thanks in advance

SYS2048 said:
Hi,
Should I just flash it through Odin or do I need to unlock the bootloader?
Click to expand...
Click to collapse
Flash TWRP only, through Odin.
Then flash ROM, GApps, and optional Magisk, through TWRP.
Magisk needed for root-apps, or to hide root.
(flash bootloader and modem not needed, only sometime later, if your modem are to old, and SIM not working)

KjellO said:
Flash TWRP only, through Odin.
Then flash ROM, GApps, and optional Magisk, through TWRP.
Magisk needed for root-apps, or to hide root.
(flash bootloader and modem not needed, only sometime later, if your modem are to old, and SIM not working)
Click to expand...
Click to collapse
Done a couple of days after my post. Forgot to report. Then flashed LOS 17, gapps (pico) and Magisk. Everything's ok.
Thanks for your answer.
Anyway, now it can be said that the P905 with stock 4.4.2 KK has the bootloader unlocked.

Hi, I've downloaded twrp-3.2.2.0-viennaltexx.img.tar and flashed by Odin, but twrp doesn't installed. In Developer settings I have not OEM unlock option.
what can I do?

uzzi78 said:
Hi, I've downloaded twrp-3.2.2.0-viennaltexx.img.tar and flashed by Odin, but twrp doesn't installed. In Developer settings I have not OEM unlock option.
what can I do?
Click to expand...
Click to collapse
What is your actual stock firmware on it?
You can try latest official .tar and then work your way up to this.

bmwdroid said:
What is your actual stock firmware on it?
You can try latest official .tar and then work your way up to this.
Click to expand...
Click to collapse
Now I've Android 5.0.2
LRX22G.P905XXSABQB1

@uzzi78 so you have the latest bootloader installed.
That's good.
Btw afaik/remember there is no unlock option.
Try other TWRPs as a. m.

ADB sideload not working with stock recovery

Hello everyone,
after installing Omni-Rom without gapps I tried to install gapps via adb sideload on stock recovery.
Unfortunately no device was shown in device manager when starting sideload.
Anyone faced this issue?
Is there another way to install gapps?
Thank you!

No.
Stock recovery can only install official updates zip files, approved by OEM.
To install anything unofficial, like OpenGApps, you need a custom recovery, like TWRP.
BTW, I never get the sideload feature of official recovery to work in any phone I tried it (not much to tell the truth, but looks like a fake feature).

BubuXP said:
No.
Stock recovery can only install official updates zip files, approved by OEM.
To install anything unofficial, like OpenGApps, you need a custom recovery, like TWRP.
BTW, I never get the sideload feature of official recovery to work in any phone I tried it (not much to tell the truth, but looks like a fake feature).
Click to expand...
Click to collapse
Thank you! I wanted to install gapps on omni treble gsi...
Solved by copying zip to system partition, installing twrp, formatting data, installing gapps with twrp, reinstalling stock recovery and formatting data again with stock recovery...
What a waste of time... Hope we will get a working twrp soon.
Btw. have you tried to use the phone unencrypted with rooted stock kernel? With editing vendor > etc > fstab.qcom forceencrypted to encryptable it works, but without wifi in rom.
The question is: will reflashing the stock kernel/recovery heal that wifi problem? I would try, but right now everythin is set up fine - perhaps you already tried...
If that would work, then it would be easy to use twrp. Then you only would need to change the boot.img after using twrp...