Related
So I perm rooted and it says S-Off in fastboot and I have superuser access I believe.
I got rom manager and downloaded clockwork through rm. I try to install rom from SD card, select the baconbits rom, it asks to backup or clear, I have tried both.
The phone boots to htc screen, then shows a black screen with a phone and a red symbol over it. I waited 20 minutes on that screen and nothing happened.
I was able to push vol up and power to get a console but I can't load anything there. It will reboot just fine after that but I have no changes and still cannot overclock.
Does this have something to do with the user keys or whatever?
Thanks in advance for reading this and any help that gets offered. I hate to have my first post on a forum being a "help me" post.
Sent from my T-Mobile G2 using XDA App
Go into Rom Manager and try to flash Clockwork recovery again. This has happened to a lot of people... Flash it a second time, and it should be good.
Dan
Did you download the "g2-recovery-test-keys.img" from the 3rd post quoted below?
Place that file in the C:/android/tools or whatever your cd line is, which should in the tools folder. Now go the 6th step. FYI the sixth step I tried from fastboot and recovery, none worked until I reinstalled the drivers my computer kept prompting me for and immedatly got the OKAY's from the 7th step.
Edit: The code "fastboot flash recovery g2-recovery-test-keys.img" should be copied pasted onto your cmd.
ciwrl said:
Noob walkthrough:
1.Setup Android SDK and install drivers/udev rules as needed
2. S-Off your g2 http://goo.gl/Sc134
4. Copy vision-baconbits-0.3.zip to your sdcard, rename it update.zip (you can do this via adb using: adb push vision-baconbits-0.3.zip /sdcard/update.zip)
5. Reboot to fastboot mode (adb reboot bootloader)
6. Flash the recovery http://n0rp.chemlab.org/android/vision/g2-recovery-test-keys.img : fastboot flash recovery g2-recovery-test-keys.img (if you get 'waiting for device' your phone either isnt in fastboot mode, or you will need to fix your sdk drivers)
7. You should get two 'OKAY's once recovery flash is complete
8. Press the power button once; then the vol down button to highlight 'recovery'; then the power button again to select the 'recovery' option
9. The phone will reboot to recovery
10. Press volume up+power to show the recovery menu
11. Select the 'Apply:update.zip' option, using volume keys to navigate, and power button as [enter]
12. Once the zip applies, reboot
If you get signature verification errors on the zip, it means your fastboot flash of recovery failed to apply, redo it
Click to expand...
Click to collapse
Bingo, That worked. Glad it was that simple. I actually had to flash clockwork a third time to get it to go all the way.
Sent from my T-Mobile G2 using XDA App
Alright, I have been searching around for my problem and I have found no such luck. I am running Evervolv ICS ROM Preview 8 and I noticed they released Preview 9. So I decided to upgrade of course but I came across a snag. My phone just boot's into the stock recovery and not into Clockwork. I have found a similar problem in another forum but I am unable to post the link do the rules of this forum.
The problem being that I cannot turn off FASTBOOT, I have no selection to do so in my phones settings.
Any help at all would be wonderful.
Hadonka402 said:
Alright, I have been searching around for my problem and I have found no such luck. I am running Evervolv ICS ROM Preview 8 and I noticed they released Preview 9. So I decided to upgrade of course but I came across a snag. My phone just boot's into the stock recovery and not into Clockwork. I have found a similar problem in another forum but I am unable to post the link do the rules of this forum.
The problem being that I cannot turn off FASTBOOT, I have no selection to do so in my phones settings.
Any help at all would be wonderful.
Click to expand...
Click to collapse
Are you s-off? If so flash cwm recovery thru hboot as a PB31IMG.zip http://dinc.does-it.net/Recoveries/CWM_5.0.2.0/PB31IMG.zip
If you can boot into the stock recovery then fastboot is not the issue. If fast boot is enabled holding vol down and power just boots the phone, you will not enter any recovery. The only way to enter recovery with fastboot enabled is to pull the battery truly powering off the phone, fastboot does not power of but hibernates for faster boot.
cmlusco said:
Are you s-off? If so flash cwm recovery thru hboot as a PB31IMG.zip
If you can boot into the stock recovery then fastboot is not the issue. If fast boot is enabled holding vol down and power just boots the phone, you will not enter any recovery. The only way to enter recovery with fastboot enabled is to pull the battery truly powering off the phone, fastboot does not power of but hibernates for faster boot.
Click to expand...
Click to collapse
Yes I am S-OFF, how do I flash through hboot? This does not fully answer my question of why I am unable to boot into Clockwork and how to fix this issue.
Hadonka402 said:
Yes I am S-OFF, how do I flash through hboot? This does not fully answer my question of why I am unable to boot into Clockwork and how to fix this issue.
Click to expand...
Click to collapse
Well if you are getting the stock recovery then i assume cwm recovery is not installed. Flashing the file above will install it.
To do so download the file and place it on your sdcard in no folders.
Power off the phone and pull the battery, then reinsert.
Hold vol down and power buttond till a white screen pops up (hboot). Wait a couple secs and hboot will find the file, parse it, and then prompt to press vol up to update. When its donr it will prompt to press vol up to reboot or vol down not to. Press vol down and then scroll to and select recovery. You should now be where you want to be.
cmlusco said:
Well if you are getting the stock recovery then i assume cwm recovery is not installed. Flashing the file above will install it.
To do so download the file and place it on your sdcard in no folders.
Power off the phone and pull the battery, then reinsert.
Hold vol down and power buttond till a white screen pops up (hboot). Wait a couple secs and hboot will find the file, parse it, and then prompt to press vol up to update. When its donr it will prompt to press vol up to reboot or vol down not to. Press vol down and then scroll to and select recovery. You should now be where you want to be.
Click to expand...
Click to collapse
I'm sorry I was not clear before, forgive me. Yes Clockwork is installed, I have reflashed it with the current version and older versions to attempt to fix the problem. I tried another recovery as well (One that I cannot recall at the moment) and I still boot into the stock recovery. My main problem is that I cannot boot into Clockwork. I'm sorry again for not being specific before.
Hadonka402 said:
I'm sorry I was not clear before, forgive me. Yes Clockwork is installed, I have reflashed it with the current version and older versions to attempt to fix the problem. I tried another recovery as well (One that I cannot recall at the moment) and I still boot into the stock recovery. My main problem is that I cannot boot into Clockwork. I'm sorry again for not being specific before.
Click to expand...
Click to collapse
Have you tried using rom manager to install cwm, and using the erase recovery before flashing option in its preferences?
What hboot version are you on?
cmlusco said:
Have you tried using rom manager to install cwm, and using the erase recovery before flashing option in its preferences?
What hboot version are you on?
Click to expand...
Click to collapse
Yes I have done that and still no luck. I am using, HBOOT-0.92.0000
Hadonka402 said:
Yes I have done that and still no luck. I am using, HBOOT-0.92.0000
Click to expand...
Click to collapse
Hmmm very strange. Do you have a pc with adb and fastboot setup on it?
cmlusco said:
Hmmm very strange. Do you have a pc with adb and fastboot setup on it?
Click to expand...
Click to collapse
No I do not, should I go ahead and get that setup? Before I forget thank you for being patient and helpful this far, I appreciate your help so far.
Download this http://dinc.does-it.net/ADB/ADB-Fastboot-USB-Drivers_v4_(x86)(x64).zip, and extract it to C:\. You should now have an ADB folder on the C:\ drive (C:\ADB), which contains adb.exe and fastboot.exe. Then follow this guide to setup the drivers http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Once that is setup and working download this zip file ( http://dinc.does-it.net/Guide_Root_New_Hboot/flash_mtd_recovery.zip ), unzip it, and place the 2 files on your sdcard in no folders.
Make sure usb debuging is checked on in menu - settings - applications - development
Power off the phone pull the battery and reinsert. Plug the phone in to the pc and hold vol down and power till hboot comes up. Select fastboot, it should say in red near the top fastboot usb. Then type the folowing in a cmd prompt:
fastboot erase recovery
Once complete reboot the phone.
Set the phone to charge only.
Open a command prompt on your PC and navigate to the same folder as your fastboot.exe file, (example type: cd C:\ADB ).
Type the following into the command prompt pressing the enter key at the end of each line:
adb shell
(You should now get a pound sign #)
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image recovery /sdcard/recovery.img
Then try to see if you can access cwm recovery.
cmlusco said:
Hmmm very strange. Do you have a pc with adb and fastboot setup on it?
Click to expand...
Click to collapse
cmlusco said:
Download this http://dinc.does-it.net/ADB/ADB-Fastboot-USB-Drivers_v4_(x86)(x64).zip, and extract it to C:\. You should now have an ADB folder on the C:\ drive (C:\ADB), which contains adb.exe and fastboot.exe. Then follow this guide to setup the drivers http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Once that is setup and working download this zip file ( http://dinc.does-it.net/Guide_Root_New_Hboot/flash_mtd_recovery.zip ), unzip it, and place the 2 files on your sdcard in no folders.
Power off the phone pull the battery and reinsert. Plug the phone in to the pc and hold vol down and power till hboot comes up. Select fastboot if not already selectef for you. It should say in red near the top fastboot usb plug. Then type the folowing in a cmd prompt:
fastboot erase recovery
Once complete reboot the phone.
Set the phone to charge only, and make sure usb debuging is checked on in menu - settings - applications - development.
Open a command prompt on your PC and navigate to the same folder as your fastboot.exe file, (example type: cd C:\ADB ).
Type the following into the command prompt pressing the enter key at the end of each line:
adb shell
(You should now get a pound sign #)
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image recovery /sdcard/recovery.img
Then try to see if you can access cwm recovery.
Click to expand...
Click to collapse
I got an error called Segmentation Fault.
Hadonka402 said:
I got an error called Segmentation Fault.
Click to expand...
Click to collapse
Sounds like the recovery partition may be corrupt, nothing will write to it. Well if i were you i would do an ruu and see if that fixes it. Not much else you can do i dont think. Hopefully the ruu will fix it and allow you to flash cwm.
How do I go about doing ruu?
Hadonka402 said:
How do I go about doing ruu?
Click to expand...
Click to collapse
Download this ruu http://dinc.does-it.net/Stock_Images/4.06.605.3/PB31IMG.zip, and here is a good write up on how to flash it. http://pvillecomp.com/?page_id=79. Its the same way you flashed the cwm file earlier in post 2, thru hboot as a PB31IMG.zip
cmlusco said:
Download this ruu http://dinc.does-it.net/Stock_Images/4.06.605.3/PB31IMG.zip, and here is a good write up on how to flash it. http://pvillecomp.com/?page_id=79. Its the same way you flashed the cwm file earlier in post 2, thru hboot as a PB31IMG.zip
Click to expand...
Click to collapse
Note that doing an ruu will wipe yout phone and you will ne back to stock. If after doing so you still cant get a recovery to flash, you will be stuck on stock.
On my HTC One V I unlock bootloader and rooted it successfully. It was working fine, but about 1-2 weeks later, when I was chatting with my friends on Messenger, it was starting to lag like hell until i couldn't do antyhing. I tried to turn it off and on with the power button. When I turned it on, firstly the logo "Quietly Brilliant" appeared and then...there was just a black screen. The phone was still turned on, but just with a black screen.. a slightly lighter black screen. I tried to turn it on and of. I can go to fast boot mode with Volume down+power button. I tried factory reset, but there was still the black screen. I send it to the manufacture, but they said, that the hardware is destroyed, because I've changed it. I think they mean I changed it with root and unlocking the bootloader...but I think that's not true? I don't think root or unlocking bootloader can change hardware. Yet I tried to unroot and relock the bootloader, but I can't do It if I can't connect my phone to my pc anymore. So my questions are:
1)How could I change the hardware?
2)How can I connect my phone to pc?
3)Is there a way to save my phone?
4)How does the manufacture know, that my phone is rooted when it can't be turned on, or connected to pc
5)Do they just lie about the hardware, so I must pay for it?
first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel
mr_nooby said:
first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel
Click to expand...
Click to collapse
Yes, I have s sim..so I have gsm i think? Right now, the manufacture is sending me back my phone. What is the bootloader exactly? Do you mean the combination of the keys volume down+power button?
If yes and I can acces to bootloader, how can I flash the rom with the correct kernel? Does it mean, my phone will be back to normal like it was at the start?
If I can't acces to bootloader, is there still a way to repair my phone?
btw I can't connect my phone to my pc...at least It didn't worked.
Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:
mr_nooby said:
Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:
Click to expand...
Click to collapse
Thank you very much!! How can I contact you when I get my phone back?
lddangsta said:
Thank you very much!! How can I contact you when I get my phone back?
Click to expand...
Click to collapse
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
My phone is back. How can I access bootloader?
lddangsta said:
My phone is back. How can I access bootloader?
Click to expand...
Click to collapse
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together
Seraz007 said:
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together
Click to expand...
Click to collapse
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.
lddangsta said:
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.
Click to expand...
Click to collapse
Okay I got it. I couldn't access to bootloader because my phone was connected to my pc
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yesm It said fastboot usb. What now?
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yes, it said fastboot usb. What now?
Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.
mr_nooby said:
Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.
Click to expand...
Click to collapse
Its bootloader is unlocked and it's rooted. Now for the recovery i found this:
http://www.teamw.in/project/twrp2/119
They say I should download the newest recovery img, access bootloader, select fastboot, plug the device into computer and run the command:
fastboot flash recovery recoveryfilename.img into command prompt right?
Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!
mr_nooby said:
Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!
Click to expand...
Click to collapse
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file
Have you downloaded the fastboot folder? And have you located it in cmd?
lddangsta said:
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file
Click to expand...
Click to collapse
i think you'll be better off flashing recovery by the all in one toolkit
mr_nooby said:
Have you downloaded the fastboot folder? And have you located it in cmd?
Click to expand...
Click to collapse
I have a folder named Android an there's: adb.exe, AdbWinApi.dll, fastboot.exe, Unlock_code.bin
Do you mean this?
Yes, now create a folder on the desktop called fastboot and copy those files in that folder. Then in cmd type cd desktop (enter) cd fastboot (enter), put the recovery in that folder, connect the phone on fastboot usb and type the recovery command
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Edit: In the fastboot screen at the top it says ***Tampered*** ***Relocked*** ***security warning**
also when i try to press recovery it shows the htc screen for 1 second then back to the same menu
i found this http://forum.xda-developers.com/showthread.php?t=2710735 but i cannot even get into recovery
haydenrbm said:
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Click to expand...
Click to collapse
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
MattMJB0188 said:
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Click to expand...
Click to collapse
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
ashyx said:
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
Click to expand...
Click to collapse
I would...but when im trying to use ADB devices it isn't found
haydenrbm said:
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
I would...but when im trying to use ADB devices it isn't found
Click to expand...
Click to collapse
Do fastboot devices ... adb commands itself won't work in bootloader, it has to be fastboot commands.
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
mushages said:
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
Click to expand...
Click to collapse
How can I unlock the bootloader again without the device showing in adb?
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
i think you have your unlock token. start from here
http://www.htcdev.com/bootloader/unlock-instructions/page-4/
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
If it's in bootloader it should show in command prompt when you type fastboot devices after connecting it to PC. If it doesn't then there is a driver problem perhaps. Check to make sure you have HTC drivers installed, or reinstall them. Might as well make sure adb is up to date as well, can do that through the Android SDK Manager. Another possibility might be that the usb cable isn't working correctly, try another cable. Fact of the matter though is, if it's in bootloader and you connect it to the PC adb/fastboot SHOULD pick it up.
So check and fix those things. Also make sure you use the correct commands, in bootloader mode, it'll be fastboot commands, not "adb devices" but "fastboot devices" ... "fastboot reboot" etc etc. Also make sure you're running the commands from within the adb/fastboot folder path(just for in case yeah...)
mushages said:
i think you have your unlock token. start from here
Click to expand...
Click to collapse
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
haydenrbm said:
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
Click to expand...
Click to collapse
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
BerndM14 said:
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
Click to expand...
Click to collapse
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
haydenrbm said:
Okay i have got into the bootloader now, thanks.
the adb devices will show it if i have it in recovery mode but not bootloader, why is that ?
Click to expand...
Click to collapse
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
BerndM14 said:
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
Click to expand...
Click to collapse
Sorry I skipped past your first response, that makes sense now.
So I need to put the rom on my internal storage then go into recovery and install the zip using TWRP..but when I plug my phone into the computer the internal storage wont show up.
I do have sync manager installed also, and it wont show up in that either
haydenrbm said:
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
Click to expand...
Click to collapse
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
BerndM14 said:
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished, once done reboot back into recovery and flash rom.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
Click to expand...
Click to collapse
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
haydenrbm said:
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
Click to expand...
Click to collapse
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
BerndM14 said:
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
Click to expand...
Click to collapse
Hello BerndM14, thank you for this baby steps. Mine m8 is a gpe version, it's 4.4.2 google rom, rooted, cwm recovery, s-on. I was trying to flash the full google 4.4.3 zip rom under recovery, however, after that, my m8 automaticlly enter recovery everytime reboot. And I can manually enter the bootloader, my pc can find the m8 both in recovery and bootloader. I searched this post, and do it accordingly, I download the gpe stock backup KOT49H.H16 - 1.16.1700.16 - CWM Philz touch and use adb sideload gpe3.zip to the cell phone sucessfully, then the recovery automaticlly starts installing rom, then, I got below message:
-- Erasing & formatting /system as ext4 (Unmounted system)
system partition formatted!
-- Mounting system partition for writing
Writing rom system to system partition
Rom system written successfully!
@symlinking and permissions
--Creating toolbox symlinks
--creating additional symlinks
Symlinks Set!
--installing busybox
Set_perm: some changes failed
E:Error in /tmp/update.zip
(status 7)
installation aborted.
Install from sideload complete.
then, I reboot it manually. problem still there, still enter the recovery automaticlly.
do you have any comments on this? please.
thanks,
I just bought a brand new Nexus 7 16 GB wrapped in it's plastic unused. Charged it turned it on, as expected it's on 4.3.
Problem is when I check for updates it says the tablet is up to date and will not update to 6.0 which I believe is the latest this tab will go to.
Question is will this self correct if left on or will I need to manually update using OTA update from a PC. Also if I do need to manually update will I need to find and install every intervening update between 4.3 and 6.0?
It'll be easiest to use the factory image to flash it to 6.0.
If you go the OTA route you'd have to go through every update individually to get to 6.0.
fr4nk1yn said:
It'll be easiest to use the factory image to flash it to 6.0.
If you go the OTA route you'd have to go through every update individually to get to 6.0.
Click to expand...
Click to collapse
Thanks, Sorry to be a noob but how do I install a factory image?
telfish said:
Thanks, Sorry to be a noob but how do I install a factory image?
Click to expand...
Click to collapse
Download ADB from here and install: https://forum.xda-developers.com/showthread.php?t=2588979
Download the image, making sure you have the correct one. I'm assuming you have a Wi-Fi version so it would then be the "Razor": https://developers.google.com/android/images#razor
Boot into the bootloader by powering off, then holding the power and volume down buttons simultaneously.
Connect to your computer with the USB cable, open a CMD, or terminal, window and type fastboot oem unlock. That will wipe the device. I don't remember if it reboots automatically afterward. if so boot back into the bootloader the same as before.
Extract the system image. Open the extracted folder then if you're on Windows just double click the flash-all.bat file. after it's done it will ultimately reboot to Android.
-edit: If you're adventurous once in the bootloader you can flash TWRP and the Oreo Go ROM from here.
fr4nk1yn said:
Download ADB from here and install: https://forum.xda-developers.com/showthread.php?t=2588979
Download the image, making sure you have the correct one. I'm assuming you have a Wi-Fi version so it would then be the "Razor": https://developers.google.com/android/images#razor
Boot into the bootloader by powering off, then holding the power and volume down buttons simultaneously.
Connect to your computer with the USB cable, open a CMD, or terminal, window and type fastboot oem unlock. That will wipe the device. I don't remember if it reboots automatically afterward. if so boot back into the bootloader the same as before.
Extract the system image. Open the extracted folder then if you're on Windows just double click the flash-all.bat file. after it's done it will ultimately reboot to Android.
-edit: If you're adventurous once in the bootloader you can flash TWRP and the Oreo Go ROM from here.
Click to expand...
Click to collapse
Thanks so much, managed to get it to 6.1 and all is working fine.