I bought used Sony Smartwatch 3 (I already had 1 and 2), but I'm wondering how the side "power" button is hard to press. It is a little loose, I can move with it a little bit. It doesn't do any sound or click or how to say it - simple it make no sound when I press it. Smartwatch 1 and 2 had harder buttons with some response (a "click sound" and I knew i pressed the button, on SW3 I don't know). Is it normal, or not? Should I send it to warranty service?
Normal not very good usage. it is the price for interchangeable band ....
Related
Hi all
Because the One X is quite a tall phone and has the power button on the top, I have noticed that when you're sat down it's quite easy to accidentally hold the power button down for a few seconds and cause a reboot - presumably the power button is pressing against a belt or hip, for example.
My real question here - is there any way to alter the reflexes of pressing the power button down, or increase the time it takes to cause the reset?
Also - has anyone else had the same thing happen? I'm thinking maybe, for practical purposes, the power button is better situated on the side of the phone when the dimensions get to this size...
Yeah, this happens to me.
Having the exact same problem, but with a much cheaper phone - a Samsung Pocket. Complete misdesign IMO and you wonder if the phone was field tested at all when you see things like this getting through - if a hard reboot with a hardware key combination is implemented then several buttons should be required to be held for the reboot to trigger. I just can't carry it in any pocket, will reboot several times a day.
Just ebayed a silicone bumper, hoping that cutting a hole in it where the power button is will make it recessed and that this will solve the problem. Maybe something similar is applicable to this One X phone.
I have the same problem, really annoying
would be interested too if there is a solution for this "problem"
Thanks for the replies guys - I suppose it's some consolation that it's not just me!
I'll let you know if I ever discover a "fix".
+1 Same happens to be. Are we sure it's just holding down the power button for to long and not a software problem causing reboots?
dr9722 said:
+1 Same happens to be. Are we sure it's just holding down the power button for to long and not a software problem causing reboots?
Click to expand...
Click to collapse
I originally thought the same thing, but when the only correlation I found was how tight my trousers were that sort of gave it away
surrealjam said:
I originally thought the same thing, but when the only correlation I found was how tight my trousers were that sort of gave it away
Click to expand...
Click to collapse
Yeah, the sexier my ass, the more likely it happens.
Finally ran into the constant bootlooping which occurs when the power button is being depressed continuously (defective/sticky power button).
I have found a work around to keep my phone running by removing the plastic power button (not the soldered power switch); my phone stays running and I can use it normally sans a power button.
My question is: how do I know if my power switch is defective/sticky rather than my plastic power button was screwed up and pressing on the power switch in an awkward way (I have dropped my phone a couple times recently).
If it's a defective/sticky power button, I want to get it repaired with mobiletechvideos but I don't want to commit to said path until I know without a doubt I have an issue.
mcho19 said:
how do I know if my power switch is defective/sticky rather than my plastic power button was screwed up and pressing on the power switch in an awkward way
Click to expand...
Click to collapse
This is almost certainly caused by a bad/stuck power (on/off) switch. It's a very common problem on all the US-carrier Galaxy SII phones. (I think the international "i9100" model uses a different type of switch.)
You can check the switch by gently touching the physical switch (plastic cover/"button" removed) with a toothpick/pen/etc. As a "snap-action" switch, it shouldn't activate until you hear/feel it "snap" closed. If it's activating with a light/slight/tiny touch, the switch is bad. On my Sprint GS2, even the slightest brush against the power button caused it to wake the phone. Sometimes it would stick "on", and then the phone would reboot. I bought a new switch, soldered it in, and have no problems since.
If you don't have insurance coverage and are out of warranty, you can replace the switch yourself. Several eBay sellers offer replacement power switches for the SGH-T989 Galaxy S2. (about ten bucks)
Or, if you don't have mad soldering skills, a few companies offer mail-in repair service:
- $39: http://www.ebay.com/itm/Power-Switch-REPAIR-SERVICE-T-Mobile-Galaxy-S2-SGH-T989-Samsung-Fix-Bad-Button-/161028469601
- $45: http://www.ebay.com/itm/Power-Button-Repair-Samsung-Galaxy-S-Galaxy-S-II-Galaxy-NOTE-MORE-/320910836052
I dropped my S3 while on the treadmill and now the power button is really sensitive, it gets pressed just from holding it or brushing up against the side. I probably going to send it in because its been less than a year so its still under manufactures warranty.
In the mean time, I know I've used ROMs that have on screen buttons in options, I could use one of those, then would it be possible to map the physical home button to be the power button?
mcj108 said:
I dropped my S3 while on the treadmill and now the power button is really sensitive, it gets pressed just from holding it or brushing up against the side. I probably going to send it in because its been less than a year so its still under manufactures warranty.
In the mean time, I know I've used ROMs that have on screen buttons in options, I could use one of those, then would it be possible to map the physical home button to be the power button?
Click to expand...
Click to collapse
Googling "remap i747" be faster ...
I ended up just installing Illusion, amazing AOSP rom by the way, and it let me enable software buttons and disable the hardware ones. It worked great until I could get a replacement phone.
Hello there nice people of Desire HD's XDA Community,
I have a somehow strange problem regarding my phone. After around 3 years my Volume Down button has stopped working. In order to turn the vol down, i have to push the Up button and then slide the bar down.
This isn't much of a problem but the real problem is that, now, I cannot enter Recovery mode if something goes wrong with my ROM. Has any of you faced something like this in the past?
Thank you for your time
If you're running a custom ROM, it probably has an advanced power menu that will allow you to reboot directly into Recovery. Just hold the power button until the power menu shows up and see what options are available. If you're using 4EXT Recovery, its Control app has a power menu that allows you to reboot into Recovery as well. If you're running CWM or TWRP, perhaps their apps have a similar option.
If your phone is off you can try connecting it to your computer and using adb to boot directly into recovery,
adb reboot recovery
hey sharksfan7... Thank you for your answers. I am familiar with all of these functions.
I was asking for something in case of the phone does not boot and there is no PC available.
Or even if some user had the same problem before and can recommend me something he/she did. Like, replace the volume rocker (although I don't think a piece of plastic is the issue. More likely some "sensor" is fried/broken)
Again, thank you for your time
If the phone won't boot, you probably need a computer.
Hi there
My vol +/- plastic broke and fell out so when i need vol down + power i use toothpick , but just before it fell out completly i noticed button has 3 pads 2 for pressing buttons and one in middle for rocking action and that one fell out completly first and after that neither vol buttons using palstic button worked, so after a while it fell out completly and i discoverwd toothpick method.
So check if buttons work when you remove big plastic bar if they do see if pads are on place, biggest black is in middle, 2 smaller for pressing near end. Or just replace whole button.
Going to use this thread...
Need help in buying a new volume button...
I'm searching on ebay for a new volume button, but can't seem to decide on which one can be the best... Don't seem that most are genuine (if any at all), but I don't expect that...
Can anyone help me on this? http://www.ebay.co.uk/sch/i.html?_s..._nkw=htc+desire+hd+volume+button&LH_PrefLoc=2
When I install the new one, does it going to stay firmly attached?!?
I'm asking this, cause on the last time that I dismantle the volume button, I don't know what I did, but I never got back the volume button firmly attached again as it used to be. Now it's very loosely and it very simple to loose it from the phone and that's why I'm buying a new one... to trying to fix the volume button to work and to get it firmly attached on the phone.
Hi there,
I've got the same problem here, but my volume buttons are gone..
I've ordered one from good old china (hehe).
I think you have to set a piece of elastic glue in the center of the button to keep it in place.
At least at my phone there is a little point of glue-like stuff there, very elastic.
onesolo said:
Going to use this thread...
Need help in buying a new volume button...
I...Now it's very loosely and it very simple to loose it from the phone and that's why I'm buying a new one... to trying to fix the volume button to work and to get it firmly attached on the phone....
Click to expand...
Click to collapse
selimgoeren said:
I think you have to set a piece of elastic glue in the center of the button to keep it in place.
At least at my phone there is a little point of glue-like stuff there, very elastic.
Click to expand...
Click to collapse
but do I have to put that elastic glue or does it already come with the new button that you order??
Did you already have that new button and put it on the DHD ?? If yes is it good and fits good? Where did you bought them (ebay? seller?)
onesolo said:
but do I have to put that elastic glue or does it already come with the new button that you order??
Did you already have that new button and put it on the DHD ?? If yes is it good and fits good? Where did you bought them (ebay? seller?)
Click to expand...
Click to collapse
Not arrived yet, will tell you then.
I think you have to organize the glue yourself..
Any news??
Yeah. Arrived this week, I just installed it. No glue delivered with the parts. And the parts aren't nearly the original, but I got two of them.
Because I'm using a cover, the volume keys didn't disappear until now.
Just took a long time to get them, next time I'm gonna spend 3-4 EUR more and order it from Germany...
Hello
I'm having an issue with the volume button too, so I'm using this thread.
I have only the down volume which is working, the up button doesn't respond whatever the ROM.
And now the button doesn't stand in place, I have to watch when i take it that the button volume stay still. (I may use some glue to fix as you wrote earlier)
Do you know what I have to change if the up is really down ?
I don't think my button is wrong, but maybe I'm wrong and there is some contact to chek before going further ?
Thank you for any help !
Is this a "thing"?
My Pixel XL is 3 days old. My power button is a bit stiff to press and barely registers a "click" when pressed. Volume buttons, on the other hand, are very snappy/clicky.
I was in Best Buy yesterday and saw the demo phone. Pwr button was also "stiff", but not nearly as stiff as mine. That button was clearly clicky.
Guessing this is a valid RMA issue, but was curious if a common issue.
Mine had this problem and after about 2 weeks of use it now clicks every time. But sometimes it makse a click sound before I even press it down, such as when first touching it or applying pressure to press it. So it bascailly makes an audible click twice now sometimes. I've seen this posted a few times. Poor design/QC...
Mine seems to work fine however it is a bit stiffer than most phones I have owned.