I've tested two sandisk class 4 SD cards.
If I format it to fat32 and partition the space(to use link2SD), my phone refuses to use the SD card and says it's not there. I use minitools for partition and the official SD card maker software for formating. I did everything by the book and tried multiple options(different labels, ntfs, ext2, etc.)
A fresh, unallocated space card works perfectly fine however.
My phone is rooted and unlocked bootloader running softMIUI rom with a modfied power saving blend kernel.
Please help! This is confusing the hell out of me.
Was looking at your post and I decided to grab a few of my MicroSD card 1gb, 2gb, 4gb, 8gb and 16gb....
I formated all of them on windows .... right click format, all default settings... Fat32. These are MicroSD cards that have had information on them... they all run fin on my arc. All different brands.
This leads me to believe that there's possibly either something wrong with the MsD card or the reader on the phone.
fluxgfx said:
Was looking at your post and I decided to grab a few of my MicroSD card 1gb, 2gb, 4gb, 8gb and 16gb....
I formated all of them on windows .... right click format, all default settings... Fat32. These are MicroSD cards that have had information on them... they all run fin on my arc. All different brands.
This leads me to believe that there's possibly either something wrong with the MsD card or the reader on the phone.
Click to expand...
Click to collapse
Solved it
Did this:
Changed the partition id to this:
"0*06 fat16,greater than 32 mb"
and made the second partition fat32 as well.
Removed the 100mb linux swap file partition I created....not sure if that was necessary.
I am trying to convert my 64gb micro SDHC card to FAT32 but i really dont wanna mess it up. when i go to format it, it asks for a cluster size, what is that??
Mine came formatted as exFAT and I decided to use it that way. It works in the phone but the recoveries will not read it.
You might try SD Formatter. It is specifically designed to format SD cards and others have reported using it to format 64GB cards.
Hi folks,
I recently got a 64 GB microsd card ( class 4) for my galaxy note 10.1 SM-P601 ( build:JSS15J.P601XXUBMJ9,Baseband601DDUBMJ1).
This card works fine when I use it on my laptop but I am unable to write it on the tablet.I am able to read the data though.
Below is the list of what I have already tried and failed.
1)I have tried rebooting,remounting reinserting
2) As the default format was exFAT I reformatted it into fat32 using fat32 formatter.
3) I tried partitioning the card on laptop into 2 32gb partitions and then using it on the tablet.
4) I have tried SD card accelerators from Play store.
Once I mount the sdcard it shows TOTAL SPACE: 62.5 GB in Settings->General->Storage.When ever I try to write the card it somewhat gets unmounted and shows TOTAL SPACE :0.0 bytes.
Please suggest a solution to make it work
maainux said:
Hi folks,
I recently got a 64 GB microsd card ( class 4) for my galaxy note 10.1 SM-P601 ( build:JSS15J.P601XXUBMJ9,Baseband601DDUBMJ1).
This card works fine when I use it on my laptop but I am unable to write it on the tablet.I am able to read the data though.
Below is the list of what I have already tried and failed.
1)I have tried rebooting,remounting reinserting
2) As the default format was exFAT I reformatted it into fat32 using fat32 formatter.
3) I tried partitioning the card on laptop into 2 32gb partitions and then using it on the tablet.
4) I have tried SD card accelerators from Play store.
Once I mount the sdcard it shows TOTAL SPACE: 62.5 GB in Settings->General->Storage.When ever I try to write the card it somewhat gets unmounted and shows TOTAL SPACE :0.0 bytes.
Please suggest a solution to make it work
Click to expand...
Click to collapse
Have you formated it in the GN 2014?
Also, I wouldn't use a Class 4.. Just my opinion.
Also, they have some bad 64gb cards out there.. I would get a name brand 64gb class 10 from BestBuy, Staples, etc.. Format it GN 2014. If everything works, then the problem was the sd card.
I have a Sandisk Ultra 64gb Class 10 in my GN 2014 and my Note 3.. both work perfectly.
Hi gurus,
The Idea is to make the the 64 gb card (that working fine on my laptop) work on my note 10.1.
Please help .
What could be the possible reason.
maainux said:
Hi gurus,
The Idea is to make the the 64 gb card (that working fine on my laptop) work on my note 10.1.
Please help .
What could be the possible reason.
Click to expand...
Click to collapse
As you have tried several things, can you please tell us exactly what your situation is now so we can help you.
If the card is a used one, it may have been formatted as FAT32, to work in a non-Sdxc compatible device. The Sdxc capable note may boycott the card because of violation of the specs, so reformat it to exFat.
It was similar with 4GB SD cards, which shall not exist by spec, but worked fine in Sd devices, not in Sdhc ones.
Experiencing the same
maainux said:
Hi folks,
I recently got a 64 GB microsd card ( class 4) for my galaxy note 10.1 SM-P601 ( build:JSS15J.P601XXUBMJ9,Baseband601DDUBMJ1).
This card works fine when I use it on my laptop but I am unable to write it on the tablet.I am able to read the data though.
Below is the list of what I have already tried and failed.
1)I have tried rebooting,remounting reinserting
2) As the default format was exFAT I reformatted it into fat32 using fat32 formatter.
3) I tried partitioning the card on laptop into 2 32gb partitions and then using it on the tablet.
4) I have tried SD card accelerators from Play store.
Once I mount the sdcard it shows TOTAL SPACE: 62.5 GB in Settings->General->Storage.When ever I try to write the card it somewhat gets unmounted and shows TOTAL SPACE :0.0 bytes.
Please suggest a solution to make it work
Click to expand...
Click to collapse
Hi maainux, I'm experiencing the same problem here, have you found any solution?
Mine is a SM-P601 / Android 4.3 / Build: JSS15J.P601UBUBMJ4 / Baseband: P601UBUBMJ1 (Fully Stock)
I tried 3 64gb micro sd card: SanDisk Ultra, Samsung, and a generic one. For both 3 the same results, as following:
1 - If I let the tablet format the card (exFAT), it can be mounted but gets suddenly unmounted when I try to write on it and shows TOTAL SPACE :0.0 bytes just like yours. I installed BTSync, when I tried to configure the sync on the tabled by selecting the sd card as the destination folder for the files, the app give a message saying it don't have permission to access that folder and gets unmounted. Tried rebooting, remounting, reinserting, and nothing change.
2 - If I format to fat32 as a logical partition using Minitool Partition Wizard, I get the same behavior as above description.
3 - If I format to fat32 as a primary partition using Minitool Partition Wizard, I can create folders but can't delete them, when I try to delete via "My Files" it says "deletion failed". I tried ES File Explorer, get the same. I was able to configure BTSync, it can copy the files from my PC folder, but when I delete some file in the PC it can't be deleted on the tablet and the BTSync app shows a message stating it can't identify the destination folder on the tablet.
I have some micro sd cards laying around, tried SanDisk 32gb, 16gb and 8gb, both 3 worked flawlessly on the tablet. I noticed the tablet format any <32gb card as fat32, and the 64gb as exFat, this make me think that was related to file system format, but it's not. Seems something related to permissions, like the KitKat 4.4 guys are experiencing. The point is I'm completely newbie on Android and have ZERO knowledge on Linux/Unix, so I have no Idea on how to solve this.
Can you guys help me?
Thanks in advance.
Hi guys
have you found any solution?
Thanks
Dear Brainaics
I've got an issue,
My sd card is 64 gb sandisk class 10
I was using Pro Bam android 4.4.1 on my n7100
So I formatted my memory card within the rom.. It was fat 32 or ntfs
Later I got some issues with the rom, So I installed the stock rooted rom.
Ever since that I've been getting an unsupported file system.
Format Card - It shows formatting - then unsupported file system error - This goes on and on.
So i tried mounting it in Linux Ubuntu & try to format using gparted & terminal.
My data is there.. The card reads & all.
But I can't format it.
These are all the steps i've taken, I even tried sd formatter I got somewhere from xda!
Any useful info would be greatly appreciated by me offcourse mentally.
I mean i crave for knowing the reason behind this anomaly!
Have a good day...
Cheers
Can you delete any files on the card? I had a 64gb SanDisk card that had all my data but I couldn't format it, copy files or delete files from it, either on my phone or laptop.
SanDisk replaced it for me as it had developed a fault.
sent from somewhere
I took a new Samsung 128GB microSD card, using "mini tool partition wizard", and wiped the stock partition. Then I changed the format from NTFS to FAT32. However, my AFTV2 doesn't recognize the SD card. Any expert advise would be helpful Thank you
Okay, I pulled out the microSD card while the AFTV2 was still running, and the re-installed it. It then asked me if I wanted to format it? After it formatted the 128 GB SDcard, it had 119+ GBs free
!Problem solved!