When in flash that stock rom file..and start my phone...after some time it shut down ...then again turn on automatically into recovery.......i have to flash this rom two times ..if i not flash it two time it...shows no OS Installed...same happened with corsifame 2 ...kitkat rom.....plz reply fast very urgent...plzzz...:good:
Flash with odin and then flash corsifame. CM and stock kernels are incompatible.
What i have to do can u elaborates it....
bsevcenk said:
Flash with odin and then flash corsifame. CM and stock kernels are incompatible.
Click to expand...
Click to collapse
i don't have odin file flashable....i only have zip i have seen on xda that it only needs cwm or twrp recovery...
Download it from here, and make sure to select the correct carrier, and as for the tutorial, you can use this one.
I had the same issue with stock deodexed, just avoid to mount system and flash twice. My issues with the recovery stopped after flash TWRP
Related
Hi Guys
My stupid friend wanted to flash his Gio (Gingerbread 2.3.4). He rebooted to recovery, flashed update.zip (root zip), and after that, without rebooting, he flashed (maybe rather he wanted to flash ) CM9.
Now he got a white screen after pushing power button. Nothing more happens. Recovery works (Home+Power combination). What to do?
Reflash original rom with Odin?
http://www.androidauthority.com/galaxy-gio-s5660-root-68206/
Try to flash CWM from link above? Should it work?
Help guyz. :good:
reflash with odin and dont flash anything else after tell if thats works
warface123 said:
reflash with odin and dont flash anything else after tell if thats works
Click to expand...
Click to collapse
Any tutorial?
Here's something
http://forum.xda-developers.com/showthread.php?t=1573628
But:
"Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)"
Recovery in this phone works fine.
Maybe there's a way to re-flash phone using this recovery?
download this rom and flash it with recovery remember to use px recovery link for it mirror.phiexz.com/
rom thread it is based on stock rom but extremely fast link forum.xda-developers.com/showthread.php?t=1683638
he can flash px-recovery,then cm9(dont forget to do wipe)
Sent from my LT26i using Tapatalk 2
my recovery wont work either,phone isnt recogniced with lsusb and odin...how to handle than?
I read the topics. Tried flashing all 3 recoveries through ODIN and NONE work!
After booting, it takes me back to the stock Android recovery.
Does anyone know how I can get the phone rooted and with Clockwork of TWRP?
What did you try to flash via Odin?
Were you flash in the .tar files?
Why not just try CF auto root? It will get you rooted quickly and painlessly then you can use ROM manager to install recovery
Sent from your phone. You should be careful where you leave that thing.
Looks like your recovery is being over written.
Follow the instructions in the stickies.
Your close
Sent from my SGH-M919 using xda app-developers app
}{Alienz}{ said:
I read the topics. Tried flashing all 3 recoveries through ODIN and NONE work!
After booting, it takes me back to the stock Android recovery.
Does anyone know how I can get the phone rooted and with Clockwork of TWRP?
Click to expand...
Click to collapse
All I did was flash the recovery in odin and once in recovery I flashed root zip to root...done
As the title says, i need a fix to fix my broken stock recovery. Running stock rom UBNG3. I found a link http://forum.xda-developers.com/showthread.php?t=1932327 but its a fix for Galaxy Note. Don't know whether this could be flashed on my phone. Although I think that if the above fix is flashable it could solve the gallery app bug but don't know for sure.
Let me explain the whole story. Back in the days when 4.2.2 rom was leaked i flashed it and then flashed the official 4.2.2 rom but since then my recovery is broken. I did not care about it until now when i wanted to root my phone. Flashed cwm recovery a number of times but kept booting into stock. An option in the rooting guide suggested to re flash the whole rom but setting up the phone again is not an option for me. Its just a big pain. What i want is a fix to fix the broken recovery so that when i flash cwm, it actually shows up.
Thanx for any help anyone could provide.
KD25 said:
As the title says, i need a fix to fix my broken stock recovery. Running stock rom UBNG3. I found a link http://forum.xda-developers.com/showthread.php?t=1932327 but its a fix for Galaxy Note. Don't know whether this could be flashed on my phone. Although I think that if the above fix is flashable it could solve the gallery app bug but don't know for sure.
Let me explain the whole story. Back in the days when 4.2.2 rom was leaked i flashed it and then flashed the official 4.2.2 rom but since then my recovery is broken. I did not care about it until now when i wanted to root my phone. Flashed cwm recovery a number of times but kept booting into stock. An option in the rooting guide suggested to re flash the whole rom but setting up the phone again is not an option for me. Its just a big pain. What i want is a fix to fix the broken recovery so that when i flash cwm, it actually shows up.
Thanx for any help anyone could provide.
Click to expand...
Click to collapse
From 4.2.2 you need to flash ur recovery using ODIN.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Use ODIN to flash CWM Recovery
ClockworkMod recovery with SELinux support
bodmar said:
From 4.2.2 you need to flash ur recovery using ODIN.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Use ODIN to flash CWM Recovery
ClockworkMod recovery with SELinux support
Click to expand...
Click to collapse
I think you have not understood my problem. My stock recovery is broken.. that dead android thing? I have not been able to get cwm work. Odin shows the success status but every time i boot into stock recovery instead of cwm.
i didnt misunderstand... CWM recovery isnt working....try to re-flash again using Odin in dowload window on fone..
or update 4.2.2 using kies and start again
or
Use Odin and stock rom for ur region
http://www.sammobile.com/firmwares/3/?download=28283
OR
try to flash PHILZ TOUCH recovery
http://forum.xda-developers.com/showthread.php?t=2452985
phone sold. thread closed
I am on 5.1.1- Software N910PVPU4COJ6 if it matters.
Any rom i download i use 7zip to make it a Tar to use in Odin but none of them work when i do that. What am i doing wrong?
I have a file/rom that has Md5 and it goes right on with Odin
I thought a tar file could be used with Odin?
Any sugestions please and thank you.
Sprint note 4
25 views and no suggestions. Dont be scared of my probably dumb questions, haha
why not just flash the rom in twrp?
not sure how to do that, i have always used odin. Cant use twrp on my phone because i am not rooted
Any directions doing it your way? Thanks
II was rooted then put this rom on and now i am not rooted. sucks
and i cant get tar files to work in Odin, just md5
mostly just want my hotspot back
You rooted before, shouldn't be that hard to do it right again: Odin TWRP and flash a stock OJ6 ROM with the mod you seek, following the OP did instructions. Done and done. You may find what you're looking for in post 3 of @tx_dbs_tx OJ6 stock thread.
Odin won't work because you can just convert Recovery flash zip to tar that Odin could use. As you suspect, you'd need a tar.md5 but 7-zip doesn't convert Recovery ROM zip to tar ball. They're completely different; tar.md5 AKA tar ball is more of a partition overwrite partition by order flash, whereas ROM zip has explicit instructions in the updater-script that Odin wouldn't follow. They have their purposes: typically, Odin would be a tool to update to current update and install custom recovery; recovery could be used to flash a ROM or mod compatible with installed update version.
I suspect Odin has done no harm if it's a recent one. It's just refusing to brick your phone.
Sent from my SM-N910P using Tapatalk
you say odin twrp, how do i get twrp onto odin. ? I downloaded twrp and did the zip thing but like before it has a tar and odin will not do it?
The file i rooted before i cant find,so i have to do something new
Odin this in AP mode
https://dl.twrp.me/trltespr/twrp-2.8.7.0-trltespr.img.tar
Sent from my SM-N910P using Tapatalk
i tried but said it failed about half way through,ugg
Does your phone boot to recovery or system? You may need to start over with full OJ6 tar. Find it in general forum and follow the OP instructions.
I'd recommend factory reset as well.
Sent from my SM-N910P using Tapatalk
Yes, i can get into that. My phone is working on the rom i posted. I just want to put another rooted rom on. Will putting that oj6 on let me do that? Will odin put that tar on my phone unlike the other tar files? Thanks
should i put the baseband oj6 on?
I finally got twrp on but when i reboot system from twrp i am just bootlooping. Any ideas what to do now?
volks71folk said:
I finally got twrp on but when i reboot system from twrp i am just bootlooping. Any ideas what to do now?
Click to expand...
Click to collapse
System was booting but you couldn't install TWRP. Now you have TWRP but system doesn't boot.
I suggested you start over with stock OJ6 tar. Did you do that? Sorry, I'm not following what you actually did. I'd say factory reset and flash the stock OJ6 ROM but it sounds like your partitions are messed up. If you agree, do the following:
1)Wipe everything but extSdCard in TWRP.
2)Power down, pull battery minimum 30 seconds.
3)Boot into download mode, using Odin 3.10.7, uncheck the default options, check AP box, click AP tab and select the OJ6 tar.md5 Start only when you have com:xx detected your phone (present).
4)Upon success, close Odin, pull USB and battery, boot intro stock recovery and factory reset.
5)Redo steps 2 and 3 but this time use both the Odin defaults to allow the auto reboot. Close Odin after success.
6)Go through setup wizard and make sure stock is fully functional.
7)Once verified, Odin TWRP with auto reboot unchecked, upon success, pull USB and battery for at least 30 seconds.
8)Boot into recovery and follow OP install instructions to flash custom ROM.
Edit: ROM zip should be on ext sdcard. You may be able to move some files from sdcard to extSdCard with TWRP file manager in advanced tab.
Sent from my SM-N910P using Tapatalk
I finally got twrp to flash on my phone, so now i am in twrp on my phone. Just not sure what to do know. I just hit reboot system in twrp and it wont get passed where it says android note 4. If i cant do anything from here i will re download the oj6 and do what you said.
I am doing what you had said but it takes me to twrp when i go to factory reset. So i did it through twrp and then flashed the oj6 baseband rom and it will not get passed the samsung galaxt note 4 image.
volks71folk said:
I am doing what you had said but it takes me to twrp when i go to factory reset. So i did it through twrp and then flashed the oj6 baseband rom and it will not get passed the samsung galaxt note 4 image.
Click to expand...
Click to collapse
There was a recent similar issue where the OP found a way out using some of the advice I gave.
Basically, Odin flashed the modem and recovery separately to get full Odin tar to flash after factory resetting in stock recovery. Sounds like your Odin flash isn't taking either. Once you have those tar files, flash them twice as suggested with battery pulls greater than 30 seconds where indicated.
I'd follow the guide using OJ6 tar to extract recovery from and the OJ6 modem tar you already have. I added one extra edit l found useful when I attempted to duplicate the OJ6 recovery tar flash myself; look for that too. Alternatively, you could use KIES to try recovery at any point that it recognizes the phone using its emergency recovery feature.
If that doesn't work, try the OG5 tar for files using the OG5 modem I linked in that thread.
You should read the whole thread to get the idea of the recovery theory starting with the summary the OP posted in this link below.
http://forum.xda-developers.com/showthread.php?p=63831716
Best wishes for success.
Sent from my SM-N910P using Tapatalk
you guys say OP?
The problem before was my phone was fine then i flashed twrp and then tried to restart it and all it did was boot loop sometimes to the yellow screen and sometimes to the android note 4. Why would it not get passed those screens after i zipped twrp? Thanks
volks71folk said:
you guys say OP?
The problem before was my phone was fine then i flashed twrp and then tried to restart it and all it did was boot loop sometimes to the yellow screen and sometimes to the android note 4. Why would it not get passed those screens after i zipped twrp? Thanks
Click to expand...
Click to collapse
OP is original poster. It could be 1st post or post quoted in some cases, although it could be the same user.
If your last post is truly the only obstacle, did you wipe following ROM OP instructions before you flashed and did you make sure the ROM flashed?
Often, custom ROMs will require more boot time on initial boot. Boot loop may suggest you didn't wipe the dalvik-cache partition. Usually, clean install is recommended. The updater-script may format system partition and others as well but without verifying specific ROM flashed, users may recommend wiping everything but extSdCard and formatting data partition multiple times each. If wiping system partition, you can expect the flash to fail with a binary failure in red when flashing unless you first rebooted recovery prior to flashing ROM. If you spot that failure, just reboot recovery with the reboot option menu and flash without wiping on second attempt.
If you've done all that and allowed time to boot, you may need to do the steps I've given in the suggestions above.
I hope you can find your way through it.
Sent from my SM-N910P using Tapatalk
Trying to update my old E4GT to KitKat (CM11) for use as an MP3 player. I believe it was on OI23 before. I tried EL26 CWM, Agat, and finally attempted installing Philz Touch before it gave up this screen. Kies cannot connect to it, even after making sure proper drivers are installed and doing the connection troubleshooter.
Am I screwed? Did I encounter the infamous "superbrick"?
Sunsparc said:
Trying to update my old E4GT to KitKat (CM11) for use as an MP3 player. I believe it was on OI23 before. I tried EL26 CWM, Agat, and finally attempted installing Philz Touch before it gave up this screen. Kies cannot connect to it, even after making sure proper drivers are installed and doing the connection troubleshooter.
Am I screwed? Did I encounter the infamous "superbrick"?
Click to expand...
Click to collapse
You should still be able to flash stock firmware via Odin in that state. Connect it and flash, provided that the battery is charged.
Droidriven said:
You should still be able to flash stock firmware via Odin in that state. Connect it and flash, provided that the battery us charged.
Click to expand...
Click to collapse
Ok I've gotten ODIN to recognize it again. Now how can I get to CM11? My biggest problem is finding a recovery that will work to flash it.
Here is a stock rooted ROM for d710 with CWM included in it, flash it via Odin and you'll be restored, rooted and have CWM.
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung%20Galaxy%20S2%20%28Sprint%29%20%28SPH-D710%29/Stock%20ROMs/GB/EL29/No%20Data%20Restore/Rooted
Then you'll need to flash an ICS modem or you won't be able to use Kit Kat custom ROMS(CM11), it is a .zip to be flashed in recovery the way a ROM is. Scroll to the bottom of the list and grab the last one. Flash it in recovery.
http://www.rwilco12.com/downloads.p... Galaxy S2 (Sprint) (SPH-D710)/Modems/ICS/ZIP
Then you'll need to find a 4.3 custom ROM to flash to update the devices partition structure before flashing a 4.4+(CM11) ROM. The trick is going to be finding 4.3 and 4.4 ROMs, they are old ROMs and may not be available for download anymore. I'm trying to get the CWM that I used uploaded so you can use it, it flashed all of my 4.4 - 4.4.4 ROMs. I flashed everything with it. It's CWM 5.0.2.7 for sph-d710.
Droidriven said:
Here is a stock rooted ROM for d710 with CWM included in it, flash it via Odin and you'll be restored, rooted and have CWM.
[URL="[/URL]
Then you'll need to flash an ICS modem or you won't be able to use Kit Kat custom ROMS(CM11), it is a .zip to be flashed in recovery the way a ROM is. Scroll to the bottom of the list and grab the last one. Flash it in recovery.
Then you'll need to find a 4.3 custom ROM to flash to update the devices partition structure before flashing a 4.4+(CM11) ROM. The trick is going to be finding 4.3 and 4.4 ROMs, they are old ROMs and may not be available for download anymore. I'm trying to get the CWM that I used uploaded so you can use it, it flashed all of my 4.4 - 4.4.4 ROMs. I flashed everything with it. It's CWM 5.0.2.7 for sph-d710.
Click to expand...
Click to collapse
I'm back up and running with it. It's rooted but I don't have CWM, it's still the stock Android System Recovery so I can't flash anything.
Sunsparc said:
I'm back up and running with it. It's rooted but I don't have CWM, it's still the stock Android System Recovery so I can't flash anything.
Click to expand...
Click to collapse
You flashed the file I linked? It is supposed to have CWM packaged with it. Go to rwilco12's android repository, at the top of the page you'll see a downloads tab. Click it then select the options on that menu until you get to Galaxy S2>Sprint SPH-D710>kernels and you'll find the Odin flashable recoveries for E4GT.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
You flashed the file I linked? It is supposed to have CWM packaged with it. Go to rwilco12's android repository, at the top of the page you'll see a downloads tab. Click it then select the options on that menu until you get to Galaxy S2>Sprint SPH-D710>kernels and you'll find the Odin flashable recoveries for E4GT.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I had an AGAT GB27 v1.3 from rwilco that I flashed to get a custom recovery, just flashed the FL24 modem with it. So I have EL29 software with FL24 modem. Ready to flash something newer now.
EDIT: And now it doesn't boot.
Sunsparc said:
I had an AGAT GB27 v1.3 from rwilco that I flashed to get a custom recovery, just flashed the FL24 modem with it. So I have EL29 software with FL24 modem. Ready to flash something newer now.
EDIT: And now it doesn't boot.
Click to expand...
Click to collapse
To get to Kit Kat, you've got to flash a 4.3 ROM then flash a 4.4 ROM. I'm not sure where you'll find one or if their are any available anymore.
There is CWM 5 or CWM 6 at rwilcos repository, its probably better than Agats
Sent from my SCH-I535 using Tapatalk
Droidriven said:
To get to Kit Kat, you've got to flash a 4.3 ROM then flash a 4.4 ROM. I'm not sure where you'll find one or if their are any available anymore.
There is CWM 5 or CWM 6 at rwilcos repository, its probably better than Agats
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
The CWM from rwilco is giving me a binary hash error in ODIN.
Sunsparc said:
The CWM from rwilco is giving me a binary hash error in ODIN.
Click to expand...
Click to collapse
I have a CWM 5.0.2.7 in zip that I'm trying to upload to my Android File Host for you but its giving me issues uploading. I'll find a place to put it so you can get it, then flash it in Agat recovery.
Flash Agat recovery again, then flash the CWM I give you in Agat, then go back to main menu and find the "reboot recovery" option somewhere, I can't remember where its at in Agat, reboot recovery will boot you into the new recovery, do not boot to system then boot to recovery, it will revert to Agat and you'll have to flash CWM again and boot to it correctly to keep it.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
I have a CWM 5.0.2.7 in zip that I'm trying to upload to my Android File Host for you but its giving me issues uploading. I'll find a place to put it so you can get it, then flash it in Agat recovery.
Flash Agat recovery again, then flash the CWM I give you in Agat, then go back to main menu and find the "reboot recovery" option somewhere, I can't remember where its at in Agat, reboot recovery will boot you into the new recovery, do not boot to system then boot to recovery, it will revert to Agat and you'll have to flash CWM again and boot to it correctly to keep it.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Awesome, I'll be waiting.
Sunsparc said:
Awesome, I'll be waiting.
Click to expand...
Click to collapse
Try this
https://www.androidfilehost.com/?fid=24545070682210688