Hi,
I had to flash a couple N7100's , and that was quickly done with DrKetan Multitool adv V6
(got that software after reading this topic: http://forum.xda-developers.com/showthread.php?t=2531965).
After 2 phone's done and 3 days later I had to do a N7105. Did it also with this tool and that brought me in trouble.
Because this software is for the N7100 and not for the N7105.
When I try to flash a N7105 ROM it say's that that rom will not be able to install, because it is not N7100 software.
It is not rebooting into the actual ROM anymore. Stuck on the Samsung N7105 logo.
So I think I have swiched a setting that a part of the phone thinks it is a N7100 and there fore not running N7105 software anymore.
How can I undo that?
I have played with to many phones so I do not have backup anymore...
Just found out that there is a DrKetan Multitool for the N7105 too (http://forum.xda-developers.com/showthread.php?t=2446618)
Downloaded it an I did the same as what I did with the N7100 tool (rooting it and maybe installing the Busybox).
After getting the same error I installed a new kernell.
But I still get the same error when flashing the ROM what says it is a 3g device (the N7100):
-- Installing: /external_sd/ResurrectionRemix-M-v5.7.4-20160921-t0lte.zip
Finding update package
Opening update package
Installing update
Warning: No file_contexts This package is for device: t0lte t0ltexx, GT-N7105, toltedv, GT-N7105T, t0lteatt, SGH-I317, t0ltetmo, SGH-T889, T0ltecan, t0ltev1, SGH-I317M; this device is t03g.
E: Error in /external_sd/ResurrectionRemix-M-v5.7.4-20160921-t0lte.zip
(Status 7)
Installation aborted.
Press any key to continue
Click to expand...
Click to collapse
Anyone with a solution?
Many thanks in advance from Holland.
Johan
no one? @dr.ketan ?
Try starting over by flashing a stock rom using Odin, flash twrp, then a custom rom?
Rooting isn't required to flash a custom rom, only a custom recovery.
audit13 said:
Try starting over by flashing a stock rom using Odin, flash twrp, then a custom rom?
Rooting isn't required to flash a custom rom, only a custom recovery.
Click to expand...
Click to collapse
This did it.
Thanks.
(and after that, I learned that Philz is no longer alife. After 2 day's trouble I installed TWRP and now running the right ROM)
Thanks for support!
Glad you got it sorted out.
Related
hey i have a note 2 running stock firmware v4.1.1 ... i tried to update the phone to 4.1.2 by the phone and not kies and when the download of the upgrade finishes , the phone says upgrade fails and keeps me on 4.1.1 ...............
so i went into a different direction to root my phone and then flash a custom rom.... i rooted it successfully and flashed MJ5 bootloader also and was ready to install the custom rom running 4.3... i went into recovery and was flashing the rom .... when i choose the flashing method and finished everything and did reboot ... the phone got me a message says that “Firmware upgrade encountered an issue" and i need kies recovery
Please help me out with this and give me the correct way to fix this.
NB: My phone is international Note II [N7100]
aboalghool said:
hey i have a note 2 running stock firmware v4.1.1 ... i tried to update the phone to 4.1.2 by the phone and not kies and when the download of the upgrade finishes , the phone says upgrade fails and keeps me on 4.1.1 ...............
so i went into a different direction to root my phone and then flash a custom rom.... i rooted it successfully and flashed MJ5 bootloader also and was ready to install the custom rom running 4.3... i went into recovery and was flashing the rom .... when i choose the flashing method and finished everything and did reboot ... the phone got me a message says that “Firmware upgrade encountered an issue" and i need kies recovery
Please help me out with this and give me the correct way to fix this.
NB: My phone is international Note II [N7100]
Click to expand...
Click to collapse
Install latest philz cwm or twrp recovery, go into recovery and wipe data/factory reset or choose option to clean for new rom Install, after that flash custom rom.
Hi guys!
I have here a samsung note 2 gt-n7100 from Globe telecom (philippines) which has the following software details:
Android 4.3
Baseband n7100xxuena1
Got this OTA from the time it was released..
The problem is i have tried flashing recovery both cwm and twrp but it doesnt seem to get installed, i flashed 6 times already by odin. And whenever i boot my fone to recovery I still get the stock recovery from samsung. Do you have any idea whether the phone is locked and prohibited from any flashing?
I am trying to root and install custom rom but still no lock. I am really stuck.
I already have installed a custom rom to sghi747 and i9305 before so im not a newbie to most procedures.
Can anyone help / enlighten me?
SOLVED guys
1. downloaded and installed stock from for n7100 (singapore) via Odin
2. flash Philz Recovery
3. Flash Mr.Luong custom rom.
Hello, I wanted to root and install TWRP then a KitKat ROM that's NOT altered or one that's been running and is a proven daily ROM. I haven't messed with Roms or phones for some time so I got all the info I need up to the ROM and I cant seem to find a stock rom. Any ideas?
Thanks!
Oxicottin said:
Hello, I wanted to root and install TWRP then a KitKat ROM that's NOT altered or one that's been running and is a proven daily ROM. I haven't messed with Roms or phones for some time so I got all the info I need up to the ROM and I cant seem to find a stock rom. Any ideas?
Thanks!
Click to expand...
Click to collapse
This is the latest NE1 4.4 stock firmware (france) from sammobile uploaded to a different host by an user for faster download speeds,extract the zip file you'll find a .tar.md5 file flash it via ODIN.Then you can just install custom recovery via pc odin (use philz 6.26 ot 6.41 initially and once you get a custom recovery successfully installed you can switch to twrp) now once into philz recovery flash supersu 1.99 from this post flash it right after you flash your recovery ,your phone should be rooted.Few things that you need to do is uncheck auto reboot in odin when flashing the recovery,after flashing philz you should manually enter it by pressing the right combination of buttons ( volume up + home + power) and then flash the supersup 1.99 zip file right away. (place the supersu zip file in sd card right after you flash the 4.4 ROM and before you proceed to install custom recovery)
Philz touch
twrp
NE 1 Stock France
Unclear
singhpratik87, I'm a little unclear on the sequence your proposing me to go through to install a ROM. I thought you installed;
1) Superuser ...... Done!
2) ODIN Custom Recovery (TWRP) ...... Done!
3) NE1 4.4 ROM ..... Downloaded moved to phone but not installed...
Ok here are my concerns, I'm on a AT&T 1317 phone will this ROM work OR would a custom ROM be better? Next, what is Philz touch?
Thanks,
Soggy
Oxicottin said:
singhpratik87, I'm a little unclear on the sequence your proposing me to go through to install a ROM. I thought you installed;
1) Superuser ...... Done!
2) ODIN Custom Recovery (TWRP) ...... Done!
3) NE1 4.4 ROM ..... Downloaded moved to phone but not installed...
Ok here are my concerns, I'm on a AT&T 1317 phone will this ROM work OR would a custom ROM be better? Next, what is Philz touch?
Thanks,
Soggy
Click to expand...
Click to collapse
See you didn't mention that you were on AT&T,unfortunately it wouldn't work you got to wait for your carrier to release the update. My explanations were pretty straight forward but now it doesn't matter anymore since you don't have the international note II GT N7100. The rom was supposed to be flashed via ODIN not SD CARD (it's a stock rom not a custom rom).And the steps are (for future reference) flash stock rom via odin, then flash philz via odin(uncheck auto reboot in odin),manually enter into recovery mode , flash supersu 1.99(or whichever is the latest) , reboot phone , DONE.
Philz touch is another popular recovery used by note II users .it's based on CWM with advanced features.
singhpratik87..... What custom ROM out there is equivalent to the 4.4 kitkat for a AT&T I317 Note 2 running 4.3? Those would prob be better anyway....
Also this other recovery you mention is it better? Like I said I have been out of messing with phones for a few years Thanks!
Oxicottin said:
singhpratik87..... What custom ROM out there is equivalent to the 4.4 kitkat for a AT&T I317 Note 2 running 4.3? Those would prob be better anyway....
Also this other recovery you mention is it better? Like I said I have been out of messing with phones for a few years Thanks!
Click to expand...
Click to collapse
None in the International Note II forum that would be compatible with AT&T as far as 4.4.2 is concerned.There's no development for 4.4.2 in your a&t note II thread?
why don't you check out this thread which is specifically for your at&t branded note 2 http://forum.xda-developers.com/galaxy-note-2-att/development
Hi, I have a galaxy s3 (SGH-i747M) with Telus and I would like to install cyanogenmod because touchwiz in a total bull****. Unfortunatly, my phone is «acting weird» and I can't install it.... I succeeded in rooting the phone, installing superSU and clockworkmod recovery but I can't flash the rom! When I want to flash it (cyanogenmod version stable 10.2.1....), I get the deadly error 7! I read that some people resolve this issue by updating their baseband, but I'm a little lost when it come to that.... I also tried to flash the rom with cyanogenmod installer, but even if the program said the install is a success, my phone encountered a unknown error and just reboot with a «clean» version of touchwiz. (This was not due to Knox, I desabled this crap when I install superSU.) Please, help me! (I softbrick my phone twice and hardbrick one previously, now he's ok but I don't want to trash it ...)
Here my phone info:
Android 4.3
Version baseband I747MVLUEND2
Kernel 3.0.31-2140838 [email protected] #1
Version number JSS15J.I747MLUEND2
I recommend flashing Philz Touch via Odin, boot into recovery, wipe, and flash a Kit kat custom ROM.
If you soft brick the phone again, you can use Odin to flash a pre-rooted ROM from XDA.
What recovery are you using? TWRP or Philz touch are your best options. make sure recovery is up to date.
hello im tring to flash roms for my s3 t999 when going to the process of root I install cwm and then I was installing Update-SUperuser.zip but it failed it says (bad) installation aboarded but the wiered thing is ive done this in the past its not only the superuser cause I have root it but when I tried installing any rom for the t999 4.3 it stopeds in the same error. Em I missing something??
neutech15 said:
hello im tring to flash roms for my s3 t999 when going to the process of root I install cwm and then I was installing Update-SUperuser.zip but it failed it says (bad) installation aboarded but the wiered thing is ive done this in the past its not only the superuser cause I have root it but when I tried installing any rom for the t999 4.3 it stopeds in the same error. Em I missing something??
Click to expand...
Click to collapse
Are you on the latest version of CWM? If not update to latest versions of CWM.
what would be the latest for s3 4.3 I tried CWM_6.0.4.7 but it didn't work it stays in a black screen
ok I used a couple of them even the one im running now its cwm 6.4.7 same error it doent take anyroms at all none. its rooted so I have no clue what else to try any ideas?
Being rooted won't make a difference. Download and flash latest cwm or twrp if it still doesn't work. Check their site for the most up to date recovery version
on the cwm website the version is 6.0.4.5 and I have CWM_6.0.4.7 so its not the recovery its gotta be be something else
neutech15 said:
on the cwm website the version is 6.0.4.5 and I have CWM_6.0.4.7 so its not the recovery its gotta be be something else
Click to expand...
Click to collapse
Try different methods to download the rom. Could be bad downloads. If it still doesn't work, use twrp