Develop Bugs

[STOCK] H815 20B Images + KDZ + Flashables (system+boot+modem+bootloader)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are for the H815 variant only. Files are from software version 20B (Android 6.0 Marshmallow).
Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. KDZ and individual images are also included.​
*There is NO anti-rollback qfuse used in this update... you can downgrade using LGUP HERE. You can also use LGUP to flash the 20B KDZ.
Please do not mirror my files!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet...
Requirements:
You must have TWRP 2.8.7+ installed to use these files. Thanks to Dees_Troy as always for that. And, of course, you must have your bootloader unlocked for TWRP to work. Currently only H815 EU and (some) SEA variants have official unlock through LG's unlock page HERE. Please do not ask if "model x" is supported... did you unlock via LG's official unlock tool? Yes? then you can use it. No? then you can't... and you should just flash the KDZ instead.
If you have a locked bootloader and want to upgrade... just use LGUP and flash the KDZ. Don't risk it with FlashFire.
Install Directions:
These directions should be used by everyone who wants a rooted 20B system. Don't want root? Then it's probably easiest to just flash the stock KDZ... or just skip the supersu zip in the directions below.
1. Download the boot, modem, bootloader and system zips listed under the download section and place them on internal or external sdcard.
2. Also download the latest SuperSu zip from HERE [Thanks to Chainfire for his auto-patching boot.img version!]
3. (re)Boot into TWRP... don't wipe anything.
4. Backup current partitions: boot, system, data, efs
5. Install boot, bootloader, modem, system and supersu zips- ADD SUPERSU LAST! (Install > select zip > press "add more zips" > select next zip > repeat)
6. After all 5 zips finish flashing you can reboot! (if TWRP asks if you want to install SU, NO!!!)
Downloads:
LG-H81520B-Flashable.System.zip
100% stock untouched system. MD5 = 22edce52ca96e20f7a16a67d00934b4d
Mirror here.
LG-H81520B-Flashable.Modem.zip
This is a flashable stock 20B modem.
LG-H81520B-Flashable.Boot.zip
This is a flashable stock 20B boot.img. Boot.img contains kernel + dtb + ramdisk.
LG-H81520B-Flashable.Bootloader.zip
This is a flashable stock 20B bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz. Do NOT wipe system before flashing this zip. Zip checks model before flashing.
Also, KDZ + all stock images for 20B are available here.
CODEFIRE DIRECTORY
Downgrade:
See the Downgrade section in my 20A thread HERE...
OR
Use LGUP HERE to flash a previous KDZ version.
Unofficial Bootloader Unlock:
Don't have official bootloader unlock? This guy claims to have a working method HERE...
#TEAMCODEFIRE
Click to expand...
Click to collapse
y u quote OP?

*reserved*
I may use this space to respond to some questions or add more notes as we go... rather than making new posts in the thread that get lost or go unnoticed.
FAQ
Q: My device shows the wrong software version in settings.. how do I fix this?
A: This is related to the "cust" (customer) partition on your phone. Using TWRP or a "Root Explorer" type app you can delete the current files in your Cust partition then you should have the proper version showing. I am not a fan of adding or flashing the cust partition... so I don't include updated cust partitions in the flashables. The cust folder/partition is in the root of your main directory.

Thanks Boss! U the man, as usual...

thanks @autoprime
I suggest you add a "NEW" on the title of the thread! because it seems the old thread! I had not noticed it at the beginning!

Thanks Auto!

Thanks mate!
Sent from my LG G4 using Tapatalk

Hi, anyone try Xposed with this version ?

can this modem be used on 20A based ROMS? - because my LTE reception with 20A is pretty weak, wants to slip back into HSPA mode in fringe areas where other phones have worked well.

.......
Enviado desde mi LG-H815 mediante Tapatalk

Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.

sudman said:
Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.
Click to expand...
Click to collapse
delete cust folder..

S7VEN is everywhere
Sent from my LG-H815 using Tapatalk

First impressions?

Changelog from 20a?

Paolo83 said:
Changelog from 20a?
Click to expand...
Click to collapse
Please Read OP!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet

I install with this method but that don`t change my software version i still have V10e-260-01, but android version is changed to 6.0.
?

Sweet! The KDZ is there
So for those of us with a locked booloader, no root etc, we can just flash / update to 20B via LGUP and retain all of our nothing fun (root and locked bootloader)?

Flashed fine H815P with LG UP.
Thanks,
VW

can't download the KDZ. tried 3 times, stopped at 67.5% everytime. how can i solve this problem?

victorwalter said:
Flashed fine H815P with LG UP.
Thanks,
VW
Click to expand...
Click to collapse
Can you give a feedback about battery and bugs? Thanks

[ROM][STOCK][B010][M2 10.0 LTE] M2-A01L LTE Premium - Stock Lollipop ROM B010

Hi all,
this is the thread to provide you all with the latest Lollipop ROM for the Mediapad M2 10.0 LTE Premium (M2-A01L) device. You can download the ROM my AFH account. If anyone is running a ROM more recent than those mentioned here, please reply in this thread. Also, if you can mention the source from where you downloaded it, please also add that in your reply, and I will update this post accordingly and give you credit for finding it.
This post contains the followin informations:
ROM downloads for the Mediapad M2 10.0
Installation instructions for the ROMs

M2-A01L Marshmallow ROMs
M2-A01L 10.0 LTE Premium - B010:
HUAWEI_MediaPad M2 10.0_M2-A01L_Firmware_Android 5.1.1_EMUI 3.1_V100R001C100B010CUSTC100D001.zip
-

Installation Intructions
1. Flash Stock ROM
Download the current Stock ROM provided above
Unzip the archive and place /dload folder (including *.APP file inside) on you internal or external the SD card.
If you have TWRP installed, flash Stock Recovery:
Download the Stock Recovery from here
Power your device completely off
Connect it to your PC, using a microUSB-cable
Hold Vol- and power the device on
Your device should show the bootloader
Open a CMD on your PC and navigate to your fastboot/adb folder
Flash Stock recovery using the command
Code:
fastboot flash recovery Stock-Recovery-MediaPadM2-10.img
Flash Stock Rom:
Turn the device off and make sure it is detached from your PC
While phone is off press Vol+ + Vol- + Power keys and hold them as long, until you see the following screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The ROM starts flashing automatically and the device will reboot as soon as it has been finished
2. Re-flash TWRP Recovery
Download TWRP Recovery from here
Power your device completely off
Connect it to your PC, using a microUSB-cable
Hold Vol- and power the device on
Your device should show the bootloader
Open a CMD on your PC and navigate to your fastboot/adb folder
Flash Stock recovery using the command
Code:
fastboot flash recovery TWRP-3.1.0-Recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img
3. Root using Magisk
Download latest Magisk from here, or here
Reboot to TWRP Recovery
Copy Magisk.zip onto internal or external SD card
Flash and be happy!
Hope this helps someone

hi all,
Is It a 6.x.x Marshmallow Official Rom?
Is It with new Emui?
Thanks

kakaroth1977 said:
hi all,
Is It a 6.x.x Marshmallow Official Rom?
Is It with new Emui?
Thanks
Click to expand...
Click to collapse
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs

5m4r7ph0n36uru said:
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
you May change the title to "stock Lollipop"
I find the B011 Rom on a Russian site

kakaroth1977 said:
you May change the title to "stock Lollipop"
Click to expand...
Click to collapse
As there is no Marshmallow out or even at the horizon for the M2 10 this doesn't make any sense imho
Sent from my htc_pmeuhl using XDA Labs

5m4r7ph0n36uru said:
As there is no Marshmallow out or even at the horizon for the M2 10 this doesn't make any sense imho
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
yes you are right but you write in the title of the thread "Marshmallow"

kakaroth1977 said:
yes you are right but you write in the title of the thread "Marshmallow"
Click to expand...
Click to collapse
Damn sorry for that one. Didn't even notice it.
Corrected thanks for the heads-up!!
Sent from my htc_pmeuhl using XDA Labs

thanks to you for the rom

kakaroth1977 said:
thanks to you for the rom
Click to expand...
Click to collapse
You're welcome. Always happy to provide something useful to the XDA community if I can.
Sent from my htc_pmeuhl using XDA Labs

Not sure if this topic is the right section, but anyway after using the dload method on the linked firmware I both get an update error by the stock recovery and the tablet keeps on a boot loop at Huawei logo.
Any suggestion? I can fastboot-flash mostly anything

M2 801L - English UK Stock Lollipop Firmware
Does anyone have the M2 801L - English UK Stock Lollipop Firmware?

I'm stuck on boot loop. I used TWRP to flash boot.img, and now I got ERROE 10 NO SYSTEM.
I reflashed the stock recovery and tried to flash all the available UPDATE.APP on the internet but didn't get me anywhere.
since it's still under warranty, I'll drop it off.

irock_you said:
I'm stuck on boot loop. I used TWRP to flash boot.img, and now I got ERROE 10 NO SYSTEM.
I reflashed the stock recovery and tried to flash all the available UPDATE.APP on the internet but didn't get me anywhere.
since it's still under warranty, I'll drop it off.
Click to expand...
Click to collapse
Sorry for the late reply. But honestly trying the warranty repair would.habe been my choice as well. Did they help you on warranty if I may ask!?
Mine's away the second time now. First time the eMMC has been corrupted and wasn't working any longer, where they replaced the Mainboard and a new IMEI was given to it. This time the IMEI got erased and read 000000000000000. They received it on friday 2 pm, repaired it and sent it back via UPS the same day. Will arrive on monday. Done on warranty as well.
Never the less this'll be my last Huawei. To many defects within the warranty person and bad update policy.
Sent from my HTC U11 using XDA Labs

TWRP-3.1.0-Recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img
d01h----mediapad m2 10
Thx change success!

5m4r7ph0n36uru said:
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
may i know is this EMUI 3.1 or later version ?

Is this later version than V100R001C100B209B005 ?

[OFFICIAL][LATEST][RECOVERY] TWRP 3.2.1 for Elephone P9000

[OFFICIAL ][RECOVERY] [20-08-2017] TWRP 3.2.3-0 - TeamWin Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Read more about TWRP here: https://twrp.me/about/
What's new in 3.2.1-0:
* minui fixes (cryptomilk) * Better android-8.0 compatibility in ROM trees (Dees_Troy) * Fix missing library in android-8.0 (nkk71) * Fix inconsistent SDCard naming (DevUt) * Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
INSTALLATION:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version above
2) Reboot to TWRP
3) Hit Install and tap the "Install Image" button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
To install from SP Flash Tools:
1) Download scatter file attached to this post
2) Load scatter file into SPFT
3) Plug USB cable into device and computer
4) Press download in SPFT
5) Reboot device
To install from offical TWRP App (Requires a rooted device.)
1) Download Official TWRP App from playstore
2) Choose the device (elephone P9000 -- p9000)
3) Install it
BUGS:
If you have an issue, the first step is to post a recovery log so we can determine the cause of the issue. This is done in recovery using Advanced -> Copy Log, or adb pull /tmp/recovery.log. Once a log is uploaded we can determine how best to proceed.
Other Projects:
Make sure to also check my dualbooting guide here: https://forum.xda-developers.com/elephone-p9000/how-to/guide-dualboot-patcher-t3608213
Thanks to:
(me) Ruben Craveiro
bigbiff
Dees_Troy
Leskal
Deepflex
Tribual
XDA:DevDB Information
[OFFICIAL][LATEST][RECOVERY] TWRP 3.2.1 for Elephone P9000, Tool/Utility for the Elephone P9000
Contributors
Ruben Craveiro
Version Information
Status: Stable
Current Stable Version: 3.2.1
Stable Release Date: 2017-08-10
Device Tree
[url]https://github.com/Ruben7173/android_device_elephone_p9000[/URL]
Created 2017-08-20
Last Updated 2018-06-03

Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?

TheMRK said:
Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?
Click to expand...
Click to collapse
currently due to an error i made while uploading our device info i set the file to go over to twrp main page, i have already sent out a fix but needs review once its approved, it should be up and running to work with the app

Ruben Craveiro said:
currently due to an error i made while uploading our device info i set the file to go over to twrp main page, i have already sent out a fix but needs review once its approved, it should be up and running to work with the app
Click to expand...
Click to collapse
That's good news.
But again, what's the difference between an installation of twrp from its app and via flashtools. Is it in the end the same? Or do you recommend one of both methods?

TheMRK said:
That's good news.
But again, what's the difference between an installation of twrp from its app and via flashtools. Is it in the end the same? Or do you recommend one of both methods?
Click to expand...
Click to collapse
If you already have root, i recommend the app, since its an easier to way to download, install/update the recovery, but if you dont have root you need at least once to install it from flash tools, since the app is not an option yet for the moment(its not on devices list, but you can manually install it), you can download the image and flash it through the app (if you have root, that is) if you dont have roog you need to use flash tools

I have P9000 with Nougat on it, version Elephone_P9000_20170418 and I'm trying to install TWRP 3.0.2 with SPFlash Tool, I only check recovery and flash it, but when I start the phone in recovery mod displays only show "no command". Is there any scatter file for this version, and what should I do to flash it through SPFlash Tool?

tonivet said:
I have P9000 with Nougat on it, version Elephone_P9000_20170418 and I'm trying to install TWRP 3.0.2 with SPFlash Tool, I only check recovery and flash it, but when I start the phone in recovery mod displays only show "no command". Is there any scatter file for this version, and what should I do to flash it through SPFlash Tool?
Click to expand...
Click to collapse
Any scatter file from one of our stock roms should do the trick, just put it alongside the downloaded twrp image, and flash it, also twrp 3.0.2 is not official, unlike this one, this one will be able to be updated directly through the twrp app once the issue is fixed.

Ruben Craveiro said:
(...) this one will be able to be updated directly through the twrp app once the issue is fixed.
Click to expand...
Click to collapse
Without root then or is it always required for this app?

TheMRK said:
Without root then or is it always required for this app?
Click to expand...
Click to collapse
the app will always require root, but you can always use magisk with the certification bug fix and magisk hide so that you can have the device certified and still be rooted. (if you dont know what certification is used for, its to allways allow the usage of android pay)

Thanks for your work
The onely thing that doesn't work for me is OTG.

Stylogey said:
Thanks for your work
The onely thing that doesn't work for me is OTG.
Click to expand...
Click to collapse
Thanks for the log but next time use pastebin so you dont make a huge post (and i have copied the log and later on ill see it, so you can edit and delete the log from post so it doesnt fill the thread, thanks)

Good day!
My apologies as I am new to this, but I can't seem to find the link to the scatter file that you mention. Could you help me, please?
Thanks in advance, and sorry for the trouble.

CrimsonWind said:
Good day!
My apologies as I am new to this, but I can't seem to find the link to the scatter file that you mention. Could you help me, please?
Thanks in advance, and sorry for the trouble.
Click to expand...
Click to collapse
its available in any stock rom that is flashable with sp flash tools

You can try to compare your sources with those of Jonny. The TWRP versions which he build worked for me.
Edit: I tried to fix it by myself and after I used another kernel (Darksense kernel) as prebuild kernel it worked.

TheMRK said:
Great work, however, I can't find it in twrp app from playstore. Will this be updated soon?
What's the difference between an installation from twrp-App and flashtools?
Click to expand...
Click to collapse
Its updated, now its available on twrp app

Ruben Craveiro said:
Its updated, now its available on twrp app
Click to expand...
Click to collapse
That's great. I've just checked with my device and can verify it works well. Thanks for your efforts.

Ruben Craveiro said:
Its updated, now its available on twrp app
Click to expand...
Click to collapse
Works just perfectly. Good job with the app part, I had the app for a long time and our Elephone never apeared, now it is just perfect. Thanks

"Download scatter file attached to this post"
Where can I download the scatter file? There is no attachment.
Thank you!

mano2 said:
"Download scatter file attached to this post"
Where can I download the scatter file? There is no attachment.
Thank you!
Click to expand...
Click to collapse
sorry, didnt add it yet, and im away from a computer, just get the scatter file from any stock rom

Ruben Craveiro said:
sorry, didnt add it yet, and im away from a computer, just get the scatter file from any stock rom
Click to expand...
Click to collapse
I didn't quite understand what are scatter files for, now I did some research and downloaded the most up-to-date stock ROM and now everything is fine!
Thank you for your help!

[ROM] Stock Official 9.0 Flash and Repair Guide [UP] Jul 2019

[ROM] Stock Rom 9.0 Flash and Repair [Full] @XDAfriends hello my friends
New Update Stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 8.1 e 9.0
Build date Mon, Jul 2019 12:24:39 +0700
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730x
[Flash]
To Flash or Repair your original system
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and Add the firmware file to AP / PDA
9. Select too CP partition in the firmware folder
10. Select too CSC partition in the firmware folder
11. Select too Userdata partition in the firmware folder
12. Click the start button, sit back and wait few minutes
13. This method reinstall your rom to original state
[Recomendation]
Install Your stock 9.x or Install 9.x Custom Stock
Install TWRP
Install Root Magisk
Install Kernel Helios 3.x
[Information]
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition, under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
Download Odin v3.13.1
https://www.filesbeast.net/download/1/Odin 3.13.1.zip
Servers
https://www.stockrom.net/samsung
Press F3 and search your model
https://www.sammobile.com/firmwares/
J730G
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/
J730F
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730F/
J730GM
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730GM/
J730FM
.https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730FM/
Search your model on page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​

What file of the 5 that come must be put in the box USERDATA?
Thank you

ismago said:
What file of the 5 that come must be put in the box USERDATA?
Thank you
Click to expand...
Click to collapse
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.

NathyAndrade said:
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
Click to expand...
Click to collapse
Ok. Thank you

I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE​
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much

Hello,
Odin's link is bad.
Should be:
https://dl.sammobile.com/Odin3-v3.13.1.zip

not very clear: you don't say anything about the BL file or the options for Odin

ismago said:
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE​
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Click to expand...
Click to collapse
I using root normaly steps
1. Access onfiguration and developer options
2. Select - unlock by oem
3. Reboot in stock recovery
4. Wipe and factory reset
5. Reboot in download mode
6. Flash twrp and reboot in twrp directly
7. Flash supersu 2.82 and root is perfectly
My iPhone is j730g and root is ok

Forget about supersu and install magisk instead. Follow the steps here: https://forum.xda-developers.com/ga...-3-1-1-1-j7-pro-sm-j730f-g-gm-t3662621/page14

arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
Read first post about BT CP CSC and AP details

New OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 7.0
Changelist 13203669
Build date Mon, 12 Mar 2018 13:25:39 +0000
Security Patch Level 2018-03-01
Product code All variants
PDA J730GUBU3ARC2
CSC J730GZTO3ARC2
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx

new OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/ZTO/download/J730GUBU3ARC2/214163/
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx

arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/

hacker812c said:
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
Click to expand...
Click to collapse
What are you talking about? All these roms are Android 7.0.

Greight said:
What are you talking about? All these roms are Android 7.0.
Click to expand...
Click to collapse
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback

does this way allow me keeping updating OTA ?

eraganxs said:
does this way allow me keeping updating OTA ?
Click to expand...
Click to collapse
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung

hacker812c said:
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
Click to expand...
Click to collapse
No, there wasn't bro. I'm more or less obsessed with updates and check there regularly. Up till now, all the roms have been 7.0.

hacker812c said:
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
Click to expand...
Click to collapse
Thanks bro

FAQ. about Android 7.0 encryption
Many users still do not understand why they try to root in
Android 7.0 and go through problems like bootloop
One of the causes of this problem is the encryption of Nougat android 7.x
Recomendations for Root or TWRP
Boot your device to RECOVERY [Stock] mode then select
FACTORY RESET. THIS WILL WIPE YOUR DEVICE AND YOU WILL LOSE ALL DATA.
(This procedure is required to remove encryption or your device won't boot)
From RECOVERY, IMMEDIATELY Boot your device to DOWNLOAD mode then
connect your USB cable. (DO NOT LET YOUR DEVICE REBOOT NORMALLY
OR YOUR DEVICE WILL RE-ENCRYPT
After this point flash Recovery TWRP and open TWRP immediately
and flash Supersu 2.82.zip [Recomended]
At this point your root is perfectly
-------------------------//--------------------------
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition; under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier

Billion Capture Plus

Billion Capture Plus
Flipkart phone with SD625
There's also a global version now for only 65€ that can be found via Chinese resellers which is a bargain.
According to 4pda the Bootloader seems unlocked since a user was alble to flash mido TWRP with no working touchscreen unfortunately.
The phone has been updated to Oreo with Camera2api enabled which makes Gcam ports work well
Unfortunately there no official downloadable firmware, unbrick guides or custom ROMs, which is surprising considering the great custom ROM community India has

Gcam with everything working except Slowmo:
*Works only on Android 7.1.2
https://f.celsoazevedo.com/file/gcamera/NoHex_MGC_6.1.021_xcam_5_beta20.apk

According to a user at 4pda forums mido TWRP can be flashed but there's no working touchscreen.
Since there's no way to find the Oreo update zip file we can't get the display driver yet

Be careful - unlocking the boot on this device leads to impossibility of OTA update to 8.1. (status 7 in recovery). Fought with this phone for almost a month, and no lucky chance to catch the update in "mid-air"(while it's being downloaded) or make the updater's apk to download the firmware in other place instead of data (owner: root). Still going for a vicious circle: we don't have root to pull the OTA update out of the phone to make a custom recovery... And we don't have TWRP to root it.
We didn't exactly flash mido TWRP, just booted it. Hardware buttons are working though, but again we don't have CWM.

Dance4Life said:
Be careful - unlocking the boot on this device leads to impossibility of OTA update to 8.1. (status 7 in recovery). Fought with this phone for almost a month, and no lucky chance to catch the update in "mid-air"(while it's being downloaded) or make the updater's apk to download the firmware in other place instead of data (owner: root). Still going for a vicious circle: we don't have root to pull the OTA update out of the phone to make a custom recovery... And we don't have TWRP to root it.
We didn't exactly flash mido TWRP, just booted it. Hardware buttons are working though, but again we don't have CWM.
Click to expand...
Click to collapse
I'm not Russian so I'm using Google translate to understand .
Should I upgrade to Oreo any downsides?
Can you upload the Google camera config files?
How can we make twrp work?
Isn't there any firmware dump tool for Qualcomm phones?
If we can get the stock boot.img we can have root without TWRP
Also has anyone tried flashing treble ROMs via fast boot?
Edit: Found this tutorial
What I wanna say is: Dumping the stock boot.img
Modify it with root via the Magisk app
Flash the modified boot.img in fast boot in order to have root

adaa1262 said:
I'm not Russian so I'm using Google translate to understand .
Should I upgrade to Oreo any downsides?
Can you upload the Google camera config files?
How can we make twrp work?
Isn't there any firmware dump tool for Qualcomm phones?
If we can get the stock boot.img we can have root without TWRP
Aldo has anyone tried flashing treble ROMs via fast boot?
Edit: Found this tutorial
Click to expand...
Click to collapse
Interesting tutorial, but the program in video saves files in unknown format. What do we do with them after we got dump?
1. Oreo update contains one little bug - it slightly interrupts the touchscreen's work. No noticeable in everyday usage, but still having its place. Can't attach the example 'çause I'm newbie here.
2. The only way to build up the TWRP is to get kernel source of stock rom (boot.img). The problem is that we can't pull it out of device - this partition is hidden under "root" privileges.
3. You can dump anything with ADB, but there is no way you see the most important partitions like data, system, boot, recovery and so on.
4. Nope, see second line;
5. No, because the chance to catch a brick (to get an empty device which won't load the system/recovery/adb/fastboot) is too high.

Dance4Life said:
Interesting tutorial, but the program in video saves files in unknown format. What do we do with them after we got dump?
1. Oreo update contains one little bug - it slightly interrupts the touchscreen's work. No noticeable in everyday usage, but still having its place. Can't attach the example 'çause I'm newbie here.
2. The only way to build up the TWRP is to get kernel source of stock rom (boot.img). The problem is that we can't pull it out of device - this partition is hidden under "root" privileges.
3. You can dump anything with ADB, but there is no way you see the most important partitions like data, system, boot, recovery and so on.
4. Nope, see second line;
5. No, because the chance to catch a brick (to get an empty device which won't load the system/recovery/adb/fastboot) is too high.
Click to expand...
Click to collapse
So is there another way ?
Have you discovered anything new?
Also as I said can you upload the Google camera config files?
You can upload them via a PC using the paper clip icon
Also how's the camera quality with Google camera?

adaa1262 said:
So is there another way ?
Have you discovered anything new?
Also as I said can you upload the Google camera config files?
Click to expand...
Click to collapse
So far we can't see another ways to get TWRP or root. Couple of configs (remove space in the end of links):
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=84721063
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=85797772
Google Camera works pretty fine, especially on 8.1. But the seventh droid has fancy photos too. Search for the gcam on the 4pda thread, there are some examples of Google Camera photos.

Dance4Life said:
So far we can't see another ways to get TWRP or root. Couple of configs (remove space in the end of links):
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=84721063
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=85797772
Google Camera works pretty fine, especially on 8.1. But the seventh droid has fancy photos too. Search for the gcam on the 4pda, there are some examples of Google Camera photos.
Click to expand...
Click to collapse
I don't have a 4pda account so I can't download them

adaa1262 said:
I don't have a 4pda account so I can't download them
Click to expand...
Click to collapse
And I don't have an ability to put them here çause I'm newbie

Dance4Life said:
And I don't have an ability to put them here çause I'm newbie
Click to expand...
Click to collapse
Can you mirror the files to gdrive or mega?

adaa1262 said:
Can you mirror the files to gdrive or mega?
Click to expand...
Click to collapse
Spaces should be removed from the end.
mega.nz/#!enRkXSy J
mega.nz/#!3jJgwIY B

Dance4Life said:
Spaces should be removed from the end.
mega.nz/#!enRkXSy J
mega.nz/#!3jJgwIY B
Click to expand...
Click to collapse
File no longer available
If i copy each it will say i neef a decrypt key

adaa1262 said:
File no longer available
If i copy each it will say i neef a decrypt key
Click to expand...
Click to collapse
So complicated... I have chosen the option "link without key". But here:
3hujYNerqEGcOlRaiaz5aXMM18FgiJcPGqTwVsOqkhw
VhdD7GPKLjFeTDvjcH2dW2b1knekeHkmPo6Hh11zSKM

XML Files for Gcam taken from 4pda forums
Thanks to @Dance4Life for uploading

Any Custom Recovery for Billion Capture Plus??
Is there any working Custom Recovery available for Billion Capture Plus (4GB+64GB model). I have tried some available recovery from TWRP and OrangeFox and it stuck in Boot screen where it just show "Billion logo and powered by Android". In this mode if I connect to my PC and using fastboot I can still access mobile and whatever I try to flash it is not working.
Any help in getting Custom Recovery or Original Bootloader so that I can use my mobile will be helpful for me.

itsKekC said:
Is there any working Custom Recovery available for Billion Capture Plus (4GB+64GB model). I have tried some available recovery from TWRP and OrangeFox and it stuck in Boot screen where it just show "Billion logo and powered by Android". In this mode if I connect to my PC and using fastboot I can still access mobile and whatever I try to flash it is not working.
Any help in getting Custom Recovery or Original Bootloader so that I can use my mobile will be helpful for me.
Click to expand...
Click to collapse
Dev on 4pda forums are still working on it

Anyone got enough language skills to translate some 4pda instructions into english? Ofc we got google translator, but personally I would feel more secure having those steps in english.

adaa1262 said:
XML Files for Gcam taken from 4pda forums
Thanks to @Dance4Life for uploading
Click to expand...
Click to collapse
File already gone?
Can someone please re-upload it?

UPDATE
Working Gcams for
Code:
Android 7.1.2
Install [URL="NoHex_MGC_6.1.021_xcam_5_beta20.apk"]http://https://f.celsoazevedo.com/file/gcamera/NoHex_MGC_6.1.021_xcam_5_beta20.apk[/URL]this apk
Download the NoHex_MGC_6.1.021_xcam_5_beta20. xml file from [URL="here"]http://mega.nz/#!enRkXSyJ[/URL] with this decryption key 3hujYNerqEGcOlRaiaz5aXMM18FgiJcPGqTwVsOqkhw
[I]Everything is working except slowmo[/I]
Code:
Android 8 Oreo
[URL="MGC_6.1.021_FINAL_V1a_A8.1+.apk"]http://https://androidfilehost.com/?fid=11410963190603855055[/URL]
How to apply config files to google camera
Open Google Camera and save a random config and get to /Gcam/config and paste the xml
Open Google Camera again and tap on the bottom between the shutter button like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose the xml and save