Hi there,
I have a problem with my G PRO F240L...
I have perform a factory reset from android settings in order to sell my G PRO, and after the factory reset and the automatic reboot, device boots in recovery mode (CWM), i tried to turn off and boot again or to use the advanced menu to "reboot device", still go directly into CWM after the LG logo shows off.
If it's help, i followed this tuto to root + install CWM on my device : http://www.technostall.com/lg-optimus-g-pro-f240-root-and-install-custom-recovery-image/#
Thank your for you help
polux400 said:
Hi there,
I have a problem with my G PRO F240L...
I have perform a factory reset from android settings in order to sell my G PRO, and after the factory reset and the automatic reboot, device boots in recovery mode (CWM), i tried to turn off and boot again or to use the advanced menu to "reboot device", still go directly into CWM after the LG logo shows off.
If it's help, i followed this tuto to root + install CWM on my device : http://www.technostall.com/lg-optimus-g-pro-f240-root-and-install-custom-recovery-image/#
Thank your for you help
Click to expand...
Click to collapse
OK, my problem was Windows 8.1... The phone is well recognized by LG Tool under W7, but now I have another major problem, at the last step, when the tool begins to flash the rom, it goes until 5% and then this popup box blocks the flash "battery level is low and upgrade is unavailable"
I have reload fully my battery (I plugged it into the G PRO dock)... still the same message.
Any help please ?
Did you manage to resolve the issue? I am just having the very same problem and a bit lost and cannot risk flashing anything right now.
polux400 said:
OK, my problem was Windows 8.1... The phone is well recognized by LG Tool under W7, but now I have another major problem, at the last step, when the tool begins to flash the rom, it goes until 5% and then this popup box blocks the flash "battery level is low and upgrade is unavailable"
I have reload fully my battery (I plugged it into the G PRO dock)... still the same message.
Any help please ?
Click to expand...
Click to collapse
Have you rooted your device with cwm or twrp??
Sent from my LG-E988 using Tapatalk HD
conradwu said:
Did you manage to resolve the issue? I am just having the very same problem and a bit lost and cannot risk flashing anything right now.
Click to expand...
Click to collapse
Hello. sorry for the delay of answer !
I managed to resolve my problem with the shelp of the member shellnut2, developer of freegee OG Pro Edition I used to root and install cwm at the first time on my G PRO.
You can find how I did that reading these topics :
http://forum.xda-developers.com/showpost.php?p=48136185&postcount=268&nocache=1&z=3099481871415190
http://forum.xda-developers.com/showthread.php?p=48435445
I hope it will help you !!
ps : I have now sold my G Pro and bought a Note 3. Much better device.
Pleaseee help me!!!!!!
Hello, I would appreciate your help because I flinched and my tel ugly now this only in the LG logo screen. I wanted to update my original rom Phone factory and downloaded the latest version before upgrading but I did not wipe data and When there finished the process gave an LG IMS error stopped working this type, and there Could not get into hard reset on the way, OK up here but then I Decided to reinstall the rom again to see if it would correct the error and then I installed the previous version I had downloaded it and my phone is so in the logo screen. If I try to instal the updated rom, would be more risk? And I wonder if I can not like the ace debugging would access via adb and make wipe data factory reset only by simple USB connection? I can not I do the code by turning the volume down and holding power button goes not into hard reset the screen goes black and comes back on the LG logo... Pleaseeeeee help meee!!!!!!
excuse meI, Don´t speak english, I am brazilian...
My phone is a LG G PRO F240L with ROM V9 Feiyu Upgrade for Rom stock V10Z Korea!!
help me
I have also same logo problem on my lg f240l.have u find any thing to solve it
Check my messages below. I gave my solution and 2 links which helped me.
do not use factory reset from android settings/
Flash this file to fix.
Hello Everyone,
This is my first thread on this forum, which i am making because I ran out of options, and don't know what to do....
My Samsung Galaxy S4 mini(GT-I9192) were shut down automatically when i am using it.After then I started my phone again
it starts normally but after the details Samsung Galaxy S4 mini(GT-I9192)comes and it again turn off and again restarts and
this process is going again and again.As I tell you my phone doesn't stuck on a boot as my phone restarts again before the samsung logo comes.
I've tried Emergency firmware upgrade and Initialization through kies but after entering model no. and S/N,
It says 'GT-I9192' does not support initialization. I've done that before with kies it never gives that error I don't know why now.
After That I tried to install stock firmware by Odin in download mode, The process gets completed pass message comes after that my phone reboots in recovery mode and a message print on the bottom "did not match size '/system/csc/common/system/csc/others.xml' (no data available)" i don't know what is that for and after that i reboot my phone and still same thing...
After all that I think maybe its an hardware issue but if it is an hardware issue then how my phone starts and again shutdown so i don't think it's an hardware issue btw i don't know what it is.
So Please If anyone Have any Solution please help me.
Thank You
I have same problem on my galaxy s4 mini gt-i9195 LTE.
first the phone doesnt wanna turn on at all, just show as QHSUSB_DLOAD
after xx hours googling for solution i try unbrick.img which bring the screen back in live:good:
then i try several roms but the phone reject the flash, so i try flash with original stock rom, that went successful
but that doesnt change something, still keep rebooting, even when load recovery it get reboot and keep rebooting.
I don't think that this might be a hardware issue, but something wrong with the android partitions.
I'll keep playing with it hope i find some solution.
If someone read this and has same or similar issue, please post what you have try so far, so we can work on it and find the problem.:highfive:
Thanks for your reply...
As my phone were start after flashing so many times and now it says Device Memory Corrupted Please reset your device to default
settings and there is a reset tab which doesn't working when i keep pressing that so now i think that maybe my eMMC chip was damaged well exactly i don't know that yet....
well for you just try connecting through kies and do a firmware upgrade and if that doesn't working than flash it through odin and also download PIT file for re-partition....
Hi all,
i was wondering if anyone can help me. My s9 plus is stuck in download mode.
Background
I installed the Android pie and then tried to manually reflash UK BTU BRJ6 to downgrade back to 8.
if i try to use smart swithch it says device not recognised
Does anyone have any advice on how i can return my phone to working order thank you
p.s screenshot attached
https:// imgur. com/a/3uwEBEY
WOW i do not know what happended there but I changed my port and for some reason it flashed ok, i must have tried it about 10 to 15 times and it failed each time BIZARRE
Hi All
I have a hard brick issue.
Device.. --Android TV box MXQ Pro 4k
--RK3229 Chip
--h26m42003gmr NaND
--Wifi Chip i need someone to help identify is.....Marked as S9012P
--link to folder with pics - drive.google.com/open?id=19zpX-wPwlswmgDJKL7Qs2JtZ2HsfI5GB
Heres the rub.............Device is 1 month old and just started running slow and freezing. I turned the device off and on again and it booted up but took very long to boot. After the desktop launcher loaded i started getting update failures and app failures as device was unusable. Started device in recovery mode cleared cache and reboot but no luck....Tried a hard reset but no success the device just refused to boot up. Updated a new ROM that worked but did not support the WIFI chipset. Found another rom and reloaded the new one but it Hard Bricked the device. no lights and not loading......cannot get into recovery mode and does not boot from SD.
I was thinking of trying Mask Rom Mode to i am unsure how to proceed.
Please assist any advice will help.
There is a serial port link on the board but im not sure what can be done with it.
Is the emmc dead? or has it just lost the boot image?
Hello, I would like to ask if my LG G3 is softbricked or hardbricked. It has been a long while since it decided to boot loop. I tried to fix it but got no results. I tried to factory reset it, but the next day it didn't turn on anymore and got stuck in the logo. Note : the phone was experiencing some heating issue before it decided to screw itself up. I tried numerous troubleshooting from the net, none worked. I also did try to reinstall the firmware to stock again, it did boot but it can't get to the home screen. I then factory reset it again and tried using another firmware also built for my phone (it's LG G3 D855). It failed again at 33% while it was in the firmware update mode. Now that I have left it for a solid year, I thought that it would be nice to try again. Which I did, but it couldn't charge anymore and it cannot boot to the logo. I tried to go to the download mode but no response. I tried connecting it to my computer, but it only detects my phone as a charge only device, it also detects it on only several random occasion. I hope this is a softbrick and it can be fixed at home so I don't need to go to the store to repair it.
I'm sorry for the long explanation, I had been trying to revive it for months now and had no luck. How do I fix this, at least how do I get to the firmware update download mode again? I really really hope that anyone can help. Thankyou so much in advance.
Use my guide in this thread
https://forum.xda-developers.com/lg...w-d855-30b-t3286268/post72875603#post72875603