MTK 6571 SM-G900H SP-Flash not loading image files ? - Upgrading, Modifying and Unlocking

I have created a scatter file for this device with MTK Droid Tools. Now when i load the scatter file in SP Flash Tool there are no image files pointing to recovery, boot ...
So i tried to load them manualy but it gives me an error saying "check if image is correct". And also I can't find ANY ROM, which contains a scatter File.
Does anybody has an idea how to fix this issue ?
Thanks

Related

Prestigio 4500T Duo need to revive

I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.

i need Scatter File D682

PLZ HELP ME
i can,t flash lg-d682 any file kdz error in 4%
i need file flash scatter LG-D682

Flash Oppo Find x2 neo

Hello
I tried flashing an oppo find x2 neo with MSM, Qfil or Qualcomm flash tool.
I downloaded the rom in ozip format.
I managed to decompress it.
But the problem is that flash applications request files in hex or xml format for flashing.
And in the rom that I downloaded, there are no these files.
Has anyone ever had this problem?
Thank you in advance for your help.

Cannot find an valid scatter file

Hello,
i´ve been trying to unbrick my device for the past few days. I have found a guide to solve the problem. The guide uses SP flash tool to flash the images needed to unbrick the device. But whenever i download an stock rom and use the scatter.txt file SP flash tool tells me its an invalid. I have tried 3 different miui stock rom downloads and in none of those have i found a valid scatter file. Could someone please tell me where can i download one?
Hokkori said:
Hello,
i´ve been trying to unbrick my device for the past few days. I have found a guide to solve the problem. The guide uses SP flash tool to flash the images needed to unbrick the device. But whenever i download an stock rom and use the scatter.txt file SP flash tool tells me its an invalid. I have tried 3 different miui stock rom downloads and in none of those have i found a valid scatter file. Could someone please tell me where can i download one?
Click to expand...
Click to collapse
Download fastboot rom. Recovery roms don't have that file. And fastboot file around 3-5GB (Usually 4.x GB), start with begonia...zip or .tgz
xiaomifirmwareupdater.com
You cam find fastboot roms there.
Thank you both, i didnt think about that.

SP Flash Tool on Linux no scatter loading file

Hi,
Why I cannot see the scatter loading file on the linux version?
Thanks

Categories

Resources