Cannot find an valid scatter file - Redmi Note 8 Pro Questions & Answers

Hello,
i´ve been trying to unbrick my device for the past few days. I have found a guide to solve the problem. The guide uses SP flash tool to flash the images needed to unbrick the device. But whenever i download an stock rom and use the scatter.txt file SP flash tool tells me its an invalid. I have tried 3 different miui stock rom downloads and in none of those have i found a valid scatter file. Could someone please tell me where can i download one?

Hokkori said:
Hello,
i´ve been trying to unbrick my device for the past few days. I have found a guide to solve the problem. The guide uses SP flash tool to flash the images needed to unbrick the device. But whenever i download an stock rom and use the scatter.txt file SP flash tool tells me its an invalid. I have tried 3 different miui stock rom downloads and in none of those have i found a valid scatter file. Could someone please tell me where can i download one?
Click to expand...
Click to collapse
Download fastboot rom. Recovery roms don't have that file. And fastboot file around 3-5GB (Usually 4.x GB), start with begonia...zip or .tgz

xiaomifirmwareupdater.com
You cam find fastboot roms there.

Thank you both, i didnt think about that.

Related

Prestigio 4500T Duo need to revive

I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.

need complete flashing guide with working/activated flashing tool

I have bricked my realme x2 (rmx1991) and trying to flash it. But the flashing tools are not working (msm tool needs username and password), (download tool shows "oppo unauthorized and cannot download"). So please give us a complete flashing guide with required rom and flash tool which is working/activated. Please.
hridoy501 said:
I have bricked my realme x2 (rmx1991) and trying to flash the .img. But the flashing tools are not working (msm tool needs username and password), (download tool shows "oppo unauthorized and cannot download"). So please give us a complete flashing guide with required rom and flash tool which is working/activated. Please.
Click to expand...
Click to collapse
Download the stock recovery from this guide extract it and flash it while your phone is on fastboot.
Before you flash stock ROM, you need to have the rom zip file either in phone storage or the sd card. You can use adb push commands to transfer the rom file to phone storage folder. ROM OTA can be downloaded from the realme official website.
Once you have the file, just select install from phone storage / install from sd card and it will flash the stock rom.
This is how I recovered my phone when it was bricked.
My device is bricked, cannot boot into flastboot or recovery. so need flash tool flashing method
hridoy501 said:
My device is bricked, cannot boot into flastboot or recovery. so need flash tool flashing method
Click to expand...
Click to collapse
You bricked the boot so lusten to me clearly u are gonna to flash your phone online with servets its costs you 15 dollars i cany put the website because the xda admin warned me before to put link so u gonna to download the full tom not ozip file the rom file has tool needs password so there is some websites buying the password so u can write me in private cuz i cant put any link
Hey
hridoy501 said:
I have bricked my realme x2 (rmx1991) and trying to flash it. But the flashing tools are not working (msm tool needs username and password), (download tool shows "oppo unauthorized and cannot download"). So please give us a complete flashing guide with required rom and flash tool which is working/activated. Please.
Click to expand...
Click to collapse
I did the same and now same thing happend.
Can you fix your device?

Xiaomi Note 8 rom flash problem

My note 8 comes with china rom which I want to change into indian rom. I have downloaded this rom from ci.mi dot com. I wanted to flash my handset (Bootloader Unlocked) with xiaomiflash software. But it seems the software can't detect the rom file and when I extracted the rar file of rom, it was contained with .br file instead of flash file. Previously I downloaded another rom file from the same site. It was same on the xiaomiflash, it can't detect the rom file after refresh and select path either. What can I do? I even tried from phone to flash (downloaded_rom>settings>System Update> Choose update package), but I didn't even find the option 'choose update package. Need help!!
arif7514592 said:
My note 8 comes with china rom which I want to change into indian rom. I have downloaded this rom from ci.mi dot com. I wanted to flash my handset (Bootloader Unlocked) with xiaomiflash software. But it seems the software can't detect the rom file and when I extracted the rar file of rom, it was contained with .br file instead of flash file. Previously I downloaded another rom file from the same site. It was same on the xiaomiflash, it can't detect the rom file after refresh and select path either. What can I do? I even tried from phone to flash (downloaded_rom>settings>System Update> Choose update package), but I didn't even find the option 'choose update package. Need help!!
Click to expand...
Click to collapse
I would like to help. But I don't have China based phone. Mine came with global. I think is the same though.
The ROM file you have contains files with *.br, this tells me it is a 'recovery rom' and needs to be flashed with recovery.
You can flash recovery ROM with twrp. But there is firmware files inside and there is danger to flash wrong firmware files (note 8 vs note 8t) . Do be certain the ROM you are to flash is supported in your hardware first.
arif7514592 said:
My note 8 comes with china rom which I want to change into indian rom. I have downloaded this rom from ci.mi dot com. I wanted to flash my handset (Bootloader Unlocked) with xiaomiflash software. But it seems the software can't detect the rom file and when I extracted the rar file of rom, it was contained with .br file instead of flash file. Previously I downloaded another rom file from the same site. It was same on the xiaomiflash, it can't detect the rom file after refresh and select path either. What can I do? I even tried from phone to flash (downloaded_rom>settings>System Update> Choose update package), but I didn't even find the option 'choose update package. Need help!!
Click to expand...
Click to collapse
if and only if you have redmi note 8 and not 8t then you can flash Indian rom....coz there's no redmi note 8t for India..
download recovery or fastboot rom from here.
if you download recovery rom...just straightaway flash from recovery...
for fastboot rom you gotta extract it twice then flash with miflash...and make sure to select "clean_all" not "clean_all_and_lock"

Flash Oppo Find x2 neo

Hello
I tried flashing an oppo find x2 neo with MSM, Qfil or Qualcomm flash tool.
I downloaded the rom in ozip format.
I managed to decompress it.
But the problem is that flash applications request files in hex or xml format for flashing.
And in the rom that I downloaded, there are no these files.
Has anyone ever had this problem?
Thank you in advance for your help.

Question How to root by patching boot.img, having issues with firmware

Im trying to root my device by patching boot.img , but the issue is when i download 12.5.3.0 firmware its only 130mb zip file and it dosent contain boot.img, is there a place where i can download entire 12.5.3.0 rom so i can get boot.img ?
Also another question , im doing this because apparently ill still get OTA updates afterwards , is that true ?
shodibre said:
Im trying to root my device by patching boot.img , but the issue is when i download 12.5.3.0 firmware its only 130mb zip file and it dosent contain boot.img, is there a place where i can download entire 12.5.3.0 rom so i can get boot.img ?
Also another question , im doing this because apparently ill still get OTA updates afterwards , is that true ?
Click to expand...
Click to collapse
Updates work different for every other phone but its possible
here is a guide: by topjohmwu of magisk
Patching Images​
If your device has boot ramdisk, you need a copy of the boot.img
If your device does NOT have boot ramdisk, you need a copy of the recovery.img.
You should be able to extract the file you need from official firmware packages or your custom ROM zip (if using one). If you are still having trouble, go to XDA-Developers and look for resources, guides, discussions, or ask for help in your device’s forum.
Copy the boot/recovery image to your device
Press the Install button in the Magisk card
If you are patching a recovery image, make sure “Recovery Mode” is checked in options.
In most cases it should already be automatically checked.
Choose “Select and Patch a File” in method, and select the stock boot/recovery image
The Magisk app will patch the image to [Internal Storage]/Download/magisk_patched_[random_strings].img.
Copy the patched image to your PC with ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].img
Flash the patched boot/recovery image to your device.
For most devices, reboot into fastboot mode and flash with command:
fastboot flash boot /path/to/magisk_patched.img or
fastboot flash recovery /path/to/magisk_patched.img if flashing a recovery image
Reboot and voila!
flairepathos.info said:
Updates work different for every other phone but its possible
here is a guide: by topjohmwu of magisk
Patching Images​
If your device has boot ramdisk, you need a copy of the boot.img
If your device does NOT have boot ramdisk, you need a copy of the recovery.img.
You should be able to extract the file you need from official firmware packages or your custom ROM zip (if using one). If you are still having trouble, go to XDA-Developers and look for resources, guides, discussions, or ask for help in your device’s forum.
Copy the boot/recovery image to your device
Press the Install button in the Magisk card
If you are patching a recovery image, make sure “Recovery Mode” is checked in options.
In most cases it should already be automatically checked.
Choose “Select and Patch a File” in method, and select the stock boot/recovery image
The Magisk app will patch the image to [Internal Storage]/Download/magisk_patched_[random_strings].img.
Copy the patched image to your PC with ADB:
adb pull /sdcard/Download/magisk_patched_[random_strings].img
Flash the patched boot/recovery image to your device.
For most devices, reboot into fastboot mode and flash with command:
fastboot flash boot /path/to/magisk_patched.img or
fastboot flash recovery /path/to/magisk_patched.img if flashing a recovery image
Reboot and voila!
Click to expand...
Click to collapse
I understand this , but im having issue with finding download link for my firmware , my phone is on 12.5.3.0 version EU , but i cant find complete firmware anywhere , only OTA 130mb download.
shodibre said:
I understand this , but im having issue with finding download link for my firmware , my phone is on 12.5.3.0 version EU , but i cant find complete firmware anywhere , only OTA 130mb download.
Click to expand...
Click to collapse
12.5.3.0 version EU can be a number of phones
say Samsung Q10 12.5.3.0 version EU, Xiaomi P250 12.5.3.0 version EU thats how i know what phone you're using
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 are the devices in the thread
flairepathos.info said:
12.5.3.0 version EU can be a number of phones
say Samsung Q10 12.5.3.0 version EU, Xiaomi P250 12.5.3.0 version EU thats how i know what phone you're using
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 are the devices in the thread
Click to expand...
Click to collapse
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Thats the firmware , but its only OTA file , i cant find any FULL rom.
I found V12.5.3.0.rkhCNxm , which is chinese verison , i dont know if i can use boot.img from it ?
in the guide it says:
Copy the boot/recovery image to your device
dont brick your phone,
you can use recovery method
shodibre said:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Thats the firmware , but its only OTA file , i cant find any FULL rom.
I found V12.5.3.0.rkhCNxm , which is chinese verison , i dont know if i can use boot.img from it ?
Click to expand...
Click to collapse
I give up, all the best
flairepathos.info said:
in the guide it says:
Copy the boot/recovery image to your device
dont brick your phone,
you can use recovery method
I give up, all the best
Click to expand...
Click to collapse
Exactly , its just that boot/recovery image is not present in this OTA update file , i need 3gb FULL rom , but i cant find any download link for it
shodibre said:
Exactly , its just that boot/recovery image is not present in this OTA update file , i need 3gb FULL rom , but i cant find any download link for it
Click to expand...
Click to collapse
Dude... Choose what you need on the website
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Hi,
I don't know English and have a hard time understanding, I hope this is what you are looking for https://www.getdroidtips.com/xiaomi-poco-f3-stock-firmware/
shodibre said:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Thats the firmware , but its only OTA file , i cant find any FULL rom.
I found V12.5.3.0.rkhCNxm , which is chinese verison , i dont know if i can use boot.img from it ?
Click to expand...
Click to collapse
The "fastboot" version should work, there should be a boot.img inside.
Redmi K40 ChinaStableFastbootV12.5.6.0.RKHCNXM11.05.2 GB2021-08-13Download
kurtschmeichel said:
The "fastboot" version should work, there should be a boot.img inside.
Redmi K40 ChinaStableFastbootV12.5.6.0.RKHCNXM11.05.2 GB2021-08-13Download
Click to expand...
Click to collapse
I just completed all the steps , flashed patched boot img ,but there is no root , when i compare unpatched boot img and patched one they are exactly the same size to the bit, am i doing something wrong ?
i managed to root it !
Thank you everyone
In my opinion if you leave written how you did it might help others with the same problem.

Categories

Resources