Related
Windows 8.1; but had same problem with Windows 7 computer.
USB device not recognized
The last USB device you connected to this computer malfunctioned. And Windows does not recognize it.
Windows has stopped this device because it has reported
problems. (Code 43) A request for the USB device descriptor failed
Tried using WUGS Toolkit to install drivers, not happening.
The phone charges via usb port with no problems
On top of that, daughter wiped phone, there are no ROMS, or usable backups.
I can get into TWRP Recovery, but it can recover what isn't there. Tried factory
reset, still nothing. No matter what I do, I get No OS Installed! Are you
sure you wish to reboot? If I do reboot, just get GOOGLE screen with lock
symbol.
Without being able to get a computer to see the phone, I can't get a ROM to
load.
Maybe change USB port with cable? But I don't want to do that if the problem
is software related.
Any ideas what I can do???
I just went through something similar like this last week, what a pain in the A$$.
Not entirely sure if this will fix your issue, but hopefully it'll help some how.
I ended up having to manually install galaxy nexus driver so I could sideload a ROM since I formatted my internal storage to test out this new F2FS BS... Anyways.
LOL
First you'll need to download and unzip "universal naked driver 0.72" Google it.
Now, without your GN connected open device manager and THEN when you plug in your GN to your PC you should see it pop up in the portable devices section.
AND also under other devices there should be "galaxy nexus" right click on it and click "update driver software"
Click "browse my computer for driver software" select the unzipped universal naked driver folder, click next and click "install this driver software anyway"
Now it should show "Google galaxy nexus ADB interface" in device manager under Samsung Android Phone.
Reboot GN into bootloader
OR
recovery (if you have a ADB supported recovery eg. TWRP 2.7.0.0, and enter ADB mode)
Now there are 2 ways to do flash an Android OS, some may find 1 easier then the other:
download/install "Wug's Nexus Root Toolkit aka NRT v1.8.3.sfx"
Google it.
Run NRT and it'll instruct and guide you through the steps required and whatever is needed to continue, eg. Select device, download TWRP 2.7.0.0...ETC.
Or
Download/install ADB setup 1.3
Google it.
I found this method a little more simpler.
Open the folder you have your ROM/gapps zip files saved on your PC, hold down shift key and right click on the folder, click "Open command window here"
Now in the command window type in "adb sideload XXXXX.zip"
XXXXX = COPY/PASTE the ROM file name. Eg. 20140615PA443RC2.zip
Press enter and now it'll flash the ROM onto your GN.
Repeat the same steps for gapps/kernel zip files.
Reboot your GN and enjoy.
BTW
I'm still loving running ParanoidAndroid Jellybean 4.1.2.
Its like pain in the A** to install phone/adb drivers in win8/8.1
I had a similar issue with my gNex a while ago but i had the drivers installed in my pc so it wasn't that difficult.
Why don't you try to install this toolkit http://forum.xda-developers.com/gal.../gnex-toolkit-v11-1-0-drivers-backup-t1392310
When you run the toolkit, it may ask you to select your device, build number etc and also about installing device drivers.
Install the drivers through it and then connect the device in recovery (twrp) mode.
it should detect it and then you can push files/roms to sdcard (internalMemory) using adb push or the built in options in the toolkit.
then flash the rom and you're done
and i recommend using win7 or xp or vista for doing this because the driver installation in win8/8.1 is a bit difficult compared with other previous windows versions but there is still a way to install drivers in win8/8.1 its just a lengthy process
All the best :good:
stargazer127 said:
Windows 8.1; but had same problem with Windows 7 computer.
USB device not recognized
The last USB device you connected to this computer malfunctioned. And Windows does not recognize it.
Windows has stopped this device because it has reported
problems. (Code 43) A request for the USB device descriptor failed
Tried using WUGS Toolkit to install drivers, not happening.
The phone charges via usb port with no problems
On top of that, daughter wiped phone, there are no ROMS, or usable backups.
I can get into TWRP Recovery, but it can recover what isn't there. Tried factory
reset, still nothing. No matter what I do, I get No OS Installed! Are you
sure you wish to reboot? If I do reboot, just get GOOGLE screen with lock
symbol.
Without being able to get a computer to see the phone, I can't get a ROM to
load.
Maybe change USB port with cable? But I don't want to do that if the problem
is software related.
Any ideas what I can do???
Click to expand...
Click to collapse
isajoo said:
I just went through something similar like this last week, what a pain in the A$$.
Not entirely sure if this will fix your issue, but hopefully it'll help some how.
I ended up having to manually install galaxy nexus driver so I could sideload a ROM since I formatted my internal storage to test out this new F2FS BS... Anyways.
LOL
First you'll need to download and unzip "universal naked driver 0.72" Google it.
Now, without your GN connected open device manager and THEN when you plug in your GN to your PC you should see it pop up in the portable devices section.
AND also under other devices there should be "galaxy nexus" right click on it and click "update driver software"
Click "browse my computer for driver software" select the unzipped universal naked driver folder, click next and click "install this driver software anyway"
Now it should show "Google galaxy nexus ADB interface" in device manager under Samsung Android Phone.
Reboot GN into bootloader
OR
recovery (if you have a ADB supported recovery eg. TWRP 2.7.0.0, and enter ADB mode)
Now there are 2 ways to do flash an Android OS, some may find 1 easier then the other:
download/install "Wug's Nexus Root Toolkit aka NRT v1.8.3.sfx"
Google it.
Run NRT and it'll instruct and guide you through the steps required and whatever is needed to continue, eg. Select device, download TWRP 2.7.0.0...ETC.
Or
Download/install ADB setup 1.3
Google it.
I found this method a little more simpler.
Open the folder you have your ROM/gapps zip files saved on your PC, hold down shift key and right click on the folder, click "Open command window here"
Now in the command window type in "adb sideload XXXXX.zip"
XXXXX = COPY/PASTE the ROM file name. Eg. 20140615PA443RC2.zip
Press enter and now it'll flash the ROM onto your GN.
Repeat the same steps for gapps/kernel zip files.
Reboot your GN and enjoy.
BTW
I'm still loving running ParanoidAndroid Jellybean 4.1.2.
Click to expand...
Click to collapse
OK, downloaded universal naked driver 0.72, connected gnex, but it only shows up under Universal Serial Bus controllers as Unknown USB Device (Device Descriptor Request Failed), not under Portable Devices, and will not allow install of of universal naked drivers, & yes I have toggled to allow win 8.1 to installed unsigned drivers. Since I cannot get phone to turn on to full android, it is not recognized. Any other suggestions?
KingWickedd said:
Its like pain in the A** to install phone/adb drivers in win8/8.1
I had a similar issue with my gNex a while ago but i had the drivers installed in my pc so it wasn't that difficult.
Why don't you try to install this toolkit http://forum.xda-developers.com/gal.../gnex-toolkit-v11-1-0-drivers-backup-t1392310
When you run the toolkit, it may ask you to select your device, build number etc and also about installing device drivers.
Install the drivers through it and then connect the device in recovery (twrp) mode.
it should detect it and then you can push files/roms to sdcard (internalMemory) using adb push or the built in options in the toolkit.
then flash the rom and you're done
and i recommend using win7 or xp or vista for doing this because the driver installation in win8/8.1 is a bit difficult compared with other previous windows versions but there is still a way to install drivers in win8/8.1 its just a lengthy process
All the best :good:
Click to expand...
Click to collapse
OK, tried this too, but it only shows up under Universal Serial Bus controllers as Unknown USB Device (Device Descriptor Request Failed), not under Portable Devices, tried 1st way by installing drivers, then using PDA, cannot complete PDA driver installation because it can't see the phone. & yes I have toggled to allow win 8.1 to installed unsigned drivers. Since I cannot get phone to turn on to full android, it is not recognized. Any other suggestions?
stargazer127 said:
OK, tried this too, but it only shows up under Universal Serial Bus controllers as Unknown USB Device (Device Descriptor Request Failed), not under Portable Devices, tried 1st way by installing drivers, then using PDA, cannot complete PDA driver installation because it can't see the phone. & yes I have toggled to allow win 8.1 to installed unsigned drivers. Since I cannot get phone to turn on to full android, it is not recognized. Any other suggestions?
Click to expand...
Click to collapse
You have to go to the device manager, double click on the "unknown usb..."
a dialog box may appear and then click on the 'driver' tab.
There u may find update/install driver button.
click on it and another window may open.
then select browse my computer for driver software and go to the respective folder where the drivers are.
then click next and it may install the drivers.
if you have installed the toolkit then you may find a folder in the toolkit's installation folder which has drivers in it.go through it if you want :good:
Ok so I'm trying to flash L. All of my drivers are updated, I downloaded them again and installed just to be sure, but when I have my Nexus plugged in it still isn't detected, and yes USB debugging is on. I tried adb reboot bootloader and nothing, then I manually went into the bootloader and typed the flash-all command and it stayed stuck on waiting for device. Very frustrating, any help is appreciated.
C-4Nati said:
Ok so I'm trying to flash L. All of my drivers are updated, I downloaded them again and installed just to be sure, but when I have my Nexus plugged in it still isn't detected, and yes USB debugging is on. I tried adb reboot bootloader and nothing, then I manually went into the bootloader and typed the flash-all command and it stayed stuck on waiting for device. Very frustrating, any help is appreciated.
Click to expand...
Click to collapse
Try changing to PTP.
FWIW, I solved my driver issue this way. And mine works with ptp, mtp, debugging on or off.
You can also try using Koushs drivers, but it only is a half-measure fix.
Also sometimes you have to revoke usb auths, and unlock the device and look for the key fingerprint prompt when you first plug it into usb, and reaccept it.
mdamaged said:
Try changing to PTP.
FWIW, I solved my driver issue this way. And mine works with ptp, mtp, debugging on or off.
You can also try using Koushs drivers, but it only is a half-measure fix.
Also sometimes you have to revoke usb auths, and unlock the device and look for the key fingerprint prompt when you first plug it into usb, and reaccept it.
Click to expand...
Click to collapse
Didn't work, followed your steps in the other thread. I guess I'll just have to wait until a flashable zip for L :/
edit- And btw I tried it on both of my hard drives, one with windows 8 and one with windows 7, didn't work on either.
C-4Nati said:
Ok so I'm trying to flash L. All of my drivers are updated, I downloaded them again and installed just to be sure, but when I have my Nexus plugged in it still isn't detected, and yes USB debugging is on. I tried adb reboot bootloader and nothing, then I manually went into the bootloader and typed the flash-all command and it stayed stuck on waiting for device. Very frustrating, any help is appreciated.
Click to expand...
Click to collapse
These are the steps that I've used and have never had any problems with drivers. My brother had the same problem that your having a while back and these steps cleared up his driver problems. Maybe it's worth a shot.
First of all I NEVER let windows automatically install drivers except for a very short time period after a clean install of windows. It makes life easier if windows doesn't jump the gun and try to install what it thinks will work. I always get drivers directly from the manufacturer. After you stop windows from trying to do it's automatic driver install thing plug in your N7 to your computer and open device manager (I usually just type dev in the start search box of W7), find your device, right click and choose Uninstall, check the box for Delete the driver software for this device. When it finishes doing that reboot your computer and unplug your N7. Once your computer has completely booted back up plug in your N7 and open the device manager again. Find your N7 again, right click Update driver software then choose Browse my computer. Find your folder (including the subfolders) with the drivers and let it install, once it finishes unplug your N7 for a few seconds then plug it back in and hopefully it should be all good. If your want it I have a copy of the usb drivers at dropbox from my recently updated sdk install. I would just extract the folder and point the install to the whole folder, if you included subfolders at the install it will find what it needs inside the folder. Make sure you authorize your computer with usb debugging. Good luck! ; )
wantabe said:
These are the steps that I've used and have never had any problems with drivers. My brother had the same problem that your having a while back and these steps cleared up his driver problems. Maybe it's worth a shot.
First of all I NEVER let windows automatically install drivers except for a very short time period after a clean install of windows. It makes life easier if windows doesn't jump the gun and try to install what it thinks will work. I always get drivers directly from the manufacturer. After you stop windows from trying to do it's automatic driver install thing plug in your N7 to your computer and open device manager (I usually just type dev in the start search box of W7), find your device, right click and choose Uninstall, check the box for Delete the driver software for this device. When it finishes doing that reboot your computer and unplug your N7. Once your computer has completely booted back up plug in your N7 and open the device manager again. Find your N7 again, right click Update driver software then choose Browse my computer. Find your folder (including the subfolders) with the drivers and let it install, once it finishes unplug your N7 for a few seconds then plug it back in and hopefully it should be all good. If your want it I have a copy of the usb drivers at dropbox from my recently updated sdk install. I would just extract the folder and point the install to the whole folder, if you included subfolders at the install it will find what it needs inside the folder. Make sure you authorize your computer with usb debugging. Good luck! ; )
Click to expand...
Click to collapse
Thanks mate, didn't work though so I'm not sure what is going on. I'll just wait until zips get created but thanks for the help guys.
I got my OP3 today and am trying to unlock the bootloader. I've tried every tutorial and toolkit out there but they all get stuck at the same point in adb, "waiting for device". The "adb devices" command works fine but anything else gets stuck on "waiting for any device". I've tried googling the issue but none of the suggestions have worked so far. Any input would be great.
did you enable oem unlocking from developer options?
bro you may be running win 10 and to connect fastboot on that u need adb driver which u will find on windows update all u have to do is just connect your phone with data transfer mode and update the window 10 . ull find something name qalllcom its adb drive or i dont but after that it will like charm.
I have all the necessary developer options checked. After futzing with it for hours, I tried a different computer (also Windows 10) and it worked right away. I'm going to see what the driver issue is this evening because I still would like to use the original computer I was using. Thanks for the replies!
What does "adb devices" return?
aadityarulez said:
What does "adb devices" return?
Click to expand...
Click to collapse
Screenshot:
for bl unlock, you need to be at fastboot mode, and installed right driver, for me working any of stock Google USB package fastboot bootloader driver.
Go to fastboot mode and do "fastboot devices", then try unlocking bl.
You can install the driver after disabling the driver enforcement..
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
You can install the driver after disabling the driver enforcement..
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
I've tried everything including disabling driver enforcement on Win 10 but I still have the same issue. I have the wrong drivers installed. I've tried uninstalling and reinstalling the drivers but when I plugin the phone, the wrong drivers get installed. I got it to work on another Windows 10 computer and below are device manager screenshots of the working (with right drivers) and not working (with wrong drivers) computers. I have no idea how to get the right drivers installed on the computer where its not working and unfortunately, its the primary computer I use.
shobuddy said:
I've tried everything including disabling driver enforcement on Win 10 but I still have the same issue. I have the wrong drivers installed. I've tried uninstalling and reinstalling the drivers but when I plugin the phone, the wrong drivers get installed. I got it to work on another Windows 10 computer and below are device manager screenshots of the working (with right drivers) and not working (with wrong drivers) computers. I have no idea how to get the right drivers installed on the computer where its not working and unfortunately, its the primary computer I use.
Click to expand...
Click to collapse
Right click, uninstall the wrong drivers.. Tick delete button too in the dialog prompt. Try installing now.
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Right click, uninstall the wrong drivers.. Tick delete button too in the dialog prompt. Try installing now.
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
I've tried this several times over. I do not get the tick option to delete.
shobuddy said:
I've tried this several times over. I do not get the tick option to delete.
Click to expand...
Click to collapse
Pm me, if case, you need some guidance.
Sent from my Xiaomi Mi 5 using XDA Labs
Same here. When I reboot in fastboot mode, the driver adb interface disappears and I get the Android Bootloader Interface (Kedacom USB Driver).
"waiting for any device" each time.
Thx for help
shobuddy said:
I've tried this several times over. I do not get the tick option to delete.
Click to expand...
Click to collapse
Try this:
Connect the op3 to usb port - don't bother changing from "charging"
Right click on "ADB Interface" in dev man and disable it.
Without unplugging the op3 use the buttons to reboot into bootloader.
Hopefully W10 will now detect your op3 and either load the correct "oneplus" driver or create a new entry in dev man of Other Devices > Android Composite ADB Interface. Right click on this and then Update driver software > Browse my computer.... > Let me pick... > and if you're lucky One plus will show up in the manufacturer column and allow you to select the composite interface
peterk-1 said:
Try this:
Connect the op3 to usb port - don't bother changing from "charging"
Right click on "ADB Interface" in dev man and disable it.
Without unplugging the op3 use the buttons to reboot into bootloader.
Hopefully W10 will now detect your op3 and either load the correct "oneplus" driver or create a new entry in dev man of Other Devices > Android Composite ADB Interface. Right click on this and then Update driver software > Browse my computer.... > Let me pick... > and if you're lucky One plus will show up in the manufacturer column and allow you to select the composite interface
Click to expand...
Click to collapse
I tried this but didn't see any new/different entry in DM when I rebooted into bootloader. Didn't see OnePlus under manufacturers either.
cyspak said:
Same here. When I reboot in fastboot mode, the driver adb interface disappears and I get the Android Bootloader Interface (Kedacom USB Driver).
"waiting for any device" each time.
Thx for help
Click to expand...
Click to collapse
Okay so this is the problem. I figured it out 2 days ago.
check the bootloader driver when you're in fastboot. Right click it and update driver, it should be the Android Bootloader 9.00, and not Bootloader 11.00
it's a silly weird fix, but it should be under Android and not Kedacom
I was using the Android SDK Studio Platform Tools and Google Drivers provided from SDK Studio
deleted
Similiar to the previous users post I'll try and be a bit more clear.
unplug your device if plugged in.
boot in to fastboot mode on your device.
Go to your PC and access device manager
plug your device in and you should see
"kedacom" instead of android interface
now inside you wanna click update driver
browse my compute for driver software > let me pick from a list of driver software > "Android adb sooner interface"
if its not that exact one check for the one that does say adb interface.
https://www.youtube.com/watch?v=Gdl6P2akRK0
I created a bootable USB drive with Linux Mint to solve my problem. It was Windows 10 that would recognize my OnePlus 3 in "Fastboot Mode" with Kedacom drivers.
So I'm running windows 10 on my pc and my op3 is easily found by windows. When I enter fastboot mode on my op3, the command "fastboot devices" doesn't show my op3. I used that 15 sec adb & fastboot installer.
MrHaPpY66 said:
So I'm running windows 10 on my pc and my op3 is easily found by windows. When I enter fastboot mode on my op3, the command "fastboot devices" doesn't show my op3. I used that 15 sec adb & fastboot installer.
Click to expand...
Click to collapse
Have you enabled oem unlocking from developer options?
I'm having the same problem. After going back to Oxygen OS (now 3.5.4) from MIUI 8 fastboot just doesn't work anymore. ABD works just fine (tried on Minimal ABD and Fastboot on Windows and ABD installed over Android Studio on Ubuntu. Fastboot did recognize the phone on Ubuntu but flashing TWRP resolved in a bootloop (tried the old and the new recovery image).
All drivers are installed on both Windows and Ubuntu (I even removed all drivers on Windows and added them again) and just to make sure everything gets installed I disabled driver signature verification on Windows, but as I said - still no luck.
Edit: Of course USB Debugging and OEM Unlocking is enabled (my bootloader is also unlocked since I already had tried out multiple roms)
Had the same Problem, Win10 is the Problem + the old OP Drivers + the new Update to Win10 etc.
Nothing worked, tryed everything. Created a Thread last week here also...
After that i created a new Partition and installed Win7 on it. All works fine, only thing is while Boot ur System u have to pick ur OS or it waits 30sec to boot up but thats ok.
Now i have Win10 for everything and i reboot to win7 for Fastboot/OP3
http://forum.xda-developers.com/oneplus-3/help/connect-to-phone-adb-fastboot-t3485079
Didnt tryed the last Tip.
KornY10 said:
Win10 is the Problem
Click to expand...
Click to collapse
Can't solve your problem, but OP3 fastboot does work in Windows 10. I did have to disable driver signature verification to install the driver in the first place, and you'll have to leave it off for the driver to stay functional, but it definitely works on Win 10.
I dont tryed ur Way, so yes after disable Driver sign. it works like u Said but i did not Test it.
i had the same problem to find the correct adb driver spent many hours but it didnt work so after that last i try to update windows 10 and find adb driver there after updating window its work like charm so all u have to do is just connect ur phone with data transfer mode on and search the window automatic updates .
Same here
It's driving me crazy. I've updated from a rooted stock OS (incl TWRP) via full OTA directly to 3.2.7, which removed TWRP and root.
I now cannot enter a Fastboot mode which detects the USB connection. Thus I can't flash TWRP again and can't root my phone, making lots of apps unusable.
I've tried every suggestion on every thread but nothing works...
Sent from my ONEPLUS A3003 using Tapatalk
Also got kedacom on my device manager after automatic driver update but my phone still isn't recognised in adb devices, does everyone else's serial number show up?
You guys still have the problem?
Sent from my Xiaomi Mi 5 using XDA Labs
Managed to solve it: Disable driver signature verification (follow howtogeek guide) then reinstall Drivers from Oneplus. Go to device manager chose the Kedacom Device and select the correct Oneplus Driver instead then reboot PC and Phone and now it should work
SgtIcetea said:
Managed to solve it: Disable driver signature verification (follow howtogeek guide) then reinstall Drivers from Oneplus. Go to device manager chose the Kedacom Device and select the correct Oneplus Driver instead then reboot PC and Phone and now it should work
Click to expand...
Click to collapse
Good that you found the solution..
Sent from my Xiaomi Mi 5 using XDA Labs
Well I didn't really solve the problem on win 10 so i just decided to use Ubuntu instead. Worked well
SgtIcetea said:
Managed to solve it: Disable driver signature verification (follow howtogeek guide) then reinstall Drivers from Oneplus. Go to device manager chose the Kedacom Device and select the correct Oneplus Driver instead then reboot PC and Phone and now it should work
Click to expand...
Click to collapse
I tried that too, but didn't work. What driver did you select in Device manager?
superiscch said:
I tried that too, but didn't work. What driver did you select in Device manager?
Click to expand...
Click to collapse
Rebooted both devices, OP3 was in fastboot. Then there was a Driver called Oneplus Bootloader Interface (or something similar)
SgtIcetea said:
Rebooted both devices, OP3 was in fastboot. Then there was a Driver called Oneplus Bootloader Interface (or something similar)
Click to expand...
Click to collapse
The driver that shows up as a spare drive when you connect the phone? Tried that too, no good. Going to boot Ubuntu later today, hope that works. I just need twrp, then I'm good ?
superiscch said:
The driver that shows up as a spare drive when you connect the phone? Tried that too, no good. Going to boot Ubuntu later today, hope that works. I just need twrp, then I'm good
Click to expand...
Click to collapse
Yeah that one. After disabling the driver signature verification you have to re install it, when it's not disabled windows just doesn't install it although it says it does. After I disabled it Windows actually showed a completely new window during installation to install the driver properly
superiscch said:
The driver that shows up as a spare drive when you connect the phone? Tried that too, no good. Going to boot Ubuntu later today, hope that works. I just need twrp, then I'm good
Click to expand...
Click to collapse
Man, had to just do it through my Ubuntu VM. Tried Win 10 Win 7, all gave me troubles.
Started Ubuntu, setup ADB and unlocked in a breeze
i have same problem
Dropped phone, broken screen/digitizer, doesn't respond to touch
Was able to see the screen a bit yesterday but now its almost all black. I mainly just need my photos off it. Tried an RMA to replace the screen but they said they had to wipe everything first
Is there any way I can pull the photos off it? I haven't tried an otg yet, but I also can't see the screen, so im not sure it would help
Is there a screen sharing program I could get w/o first installing it on my phone?
I think my phone may be rooted, i forget if i ever did, but i dont have TWRP installed on it? (i dont super know what that is but i see other people talking about it)
Any thoughts on how to pull photos off it? I tried the adb devices but the cmd prompt doesn't seem to recognize the phone
Im quite sure I have debugging enabled, just coudln't get the file transfer button hit
Adb pull command should work, but you need to sort the drivers first (I'm guessing that's the issue).
Sent from my OnePlus 3 using Tapatalk
Explorer23 said:
Adb pull command should work, but you need to sort the drivers first (I'm guessing that's the issue).
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Ok cool, how would i go about sorting the drivers? o.0
jsaden said:
Ok cool, how would i go about sorting the drivers? o.0
side note.... wth is this image verification lol, ive tried like 30 of them, why is it so hard to post lol ><
Click to expand...
Click to collapse
Sorry, can't give definite answer, I know that I had an issue with drivers (device wasn't properly recognized) and tried pretty much everything that Google suggested ... Until it finally started working. I have no idea exactly what solved the issue, it was over a year and a half ago. The next time I clean installed Windows (10 in both cases) it was smart enough to automatically find right drivers.
So ... I'm guessing Googling something like "OnePlus 3 Windows # drivers" should find something useful?
About image verification: are you talking about anti-bot system that checks if you're human? Wouldn't know much about that, never personally had issues with it, but also very rarely see it on XDA as I'm nearly always checking this forum in Tapatalk app.
Sent from my OnePlus 3 using Tapatalk
jsaden said:
Ok cool, how would i go about sorting the drivers? o.0
Click to expand...
Click to collapse
If you had earlier connected your phone to the PC and authorised the PC connection on your phone, then it is a simple issue of disabling driver signature verification on Win 10 and installing the OnePlus drivers on it. Search for and download the correct drivers to your PC. Hold down Shift key and restart the PC. Choose Troubeshoot>Advanced Options>Startup Options and click Restart. On restarting, there will be a list of options. Choose 7 in the Options or click F7 on your keyboard and you will boot into the disabled mode. Now connect your phone and go to Device Manager in PC. Choose the phone which may be showing up as Unknown or with an yellow flag and right click and choose Update Driver. Navigate to the downloaded driver and install it. Now your phone should be properly recognised. Use adb pull command to copy whatever files you need to. Note that this driver signature verification disabling is temporary and when you restart the PC in the normal way, the PC will go back to the normal mode. But the installed drivers will still function.
Hope this helps.
tnsmani said:
If you had earlier connected your phone to the PC and authorised the PC connection on your phone, then it is a simple issue of disabling driver signature verification on Win 10 and installing the OnePlus drivers on it. Search for and download the correct drivers to your PC. Hold down Shift key and restart the PC. Choose Troubeshoot>Advanced Options>Startup Options and click Restart. On restarting, there will be a list of options. Choose 7 in the Options or click F7 on your keyboard and you will boot into the disabled mode. Now connect your phone and go to Device Manager in PC. Choose the phone which may be showing up as Unknown or with an yellow flag and right click and choose Update Driver. Navigate to the downloaded driver and install it. Now your phone should be properly recognised. Use adb pull command to copy whatever files you need to. Note that this driver signature verification disabling is temporary and when you restart the PC in the normal way, the PC will go back to the normal mode. But the installed drivers will still function.
Hope this helps.
Click to expand...
Click to collapse
Oh wow, do you know if this works on Win7? And also I can't see my screen at all, so could I do adb pull of entire folder or hardrive kind of thing? I mainly just want phots, but i've never done adb stuff so not sure how it works
Had the same issue with my Lenovo P2. Only i didn't have debugging enabled. If you have, screen mirroring should be an easy solution. You could just see ur phone screen on ur computer that way. What helped me was to forceboot the phone to recovery with the hardware buttons, then connect it to ur pc. TWRP will automatically launch MTP. When u backed up evrything, you can wipe ur device through adb
jsaden said:
Oh wow, do you know if this works on Win7? And also I can't see my screen at all, so could I do adb pull of entire folder or hardrive kind of thing? I mainly just want phots, but i've never done adb stuff so not sure how it works
Click to expand...
Click to collapse
I don't know about Win 7. It will work on Win 10. Most likely, this should not be needed in Win 7 at all as the drivers should install whether signed or not.
Regarding copying data, a simple command of "adb pull /sdcard" will copy all the folders, files, data etc to your PC. You can also specify where you want the data copied to, simply add the path to the command above. This will work whether your screen works or not. Of course, there are other methods of copying data, you can search for it if you need it.