Develop Bugs

Can't boot into recovery after cm14.1 nightly official

So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers

Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get

JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?

JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk

I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.

Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.

Thanks a lot guys, that did the trick, and done with flashify

JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk

Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.

Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!

HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.

GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...

m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time

http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me

JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me

This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!

gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..

After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.

Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse

Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life

After flashing CM14.1 Nightly, I can't boot into recovery.

Hello guys,
As stated in the title, I can not boot into recovery since I flashed CM 14.1. I already tried reflashing TWRP, booting TWRP via fastboot, using another, more recent TWRP image.
This is rather urgent, since, although I can boot CM 14.1 without any problem, I forgot to do a Titanium Backup of two apps, so I have to restore a nandroid backup to get those back, which is kind of hard, without access to TWRP. Using TWRP Explorer is out of question, since that, as far as I know, does not work with encrypted backups.
Flashing via Flashify does not work either.
I just tried with the most recent CM Recovery, that does work, but that does not really help, since that won't restore TWRP Backups..
Greetings
jcgruenhage

delete

Just flash twrp again!?

Flash the twrp in the following link https://www.androidfilehost.com/? using flashify from play store .This helped me

daleski75 said:
Just flash twrp again!?
Click to expand...
Click to collapse
That did not work, at least not with the official TWRP. Flashing this TWRP gave me TWRP back, but now restoring the Backup somehow did not work as expected, the old CM 14.1 unofficial build that is in that backup won't boot.
I'll try only restoring the data part onto the official build, is there anything else you can recommend? Another firmware? Something?
Oh and by the way, thank you, for helping here and for you CM 14.1 builds, somehow I couldn't build CM 14.1 and 14, so having your builds was really helpful.

What version of OOS was you on prior to flashing CM14.1?

daleski75 said:
What version of OOS was you on prior to flashing CM14.1?
Click to expand...
Click to collapse
Directly upon receiving my OP3 I flashed CM13, that was in August, so 3.2.4 I guess, and I flashed the firmware of 3.2.6 before flashing Takers and your CM14 and later 14.1 builds.
TWRP behaves funny, the progress of restoring Data is already at 138%, 6800MB of 4899MB, the calculation is not taking compression into account I guess?
LOOOL, I have booted into the official CM14.1 with the old data, no fc or anything, but my pattern does not work anymore. same pattern as before, won't be accepted.

Never seen that issue before what happens if you reboot into the bootloader and then connect the phone to your pc and type fastboot boot <name of recovery> does it boot up?
Of course replace the < > with the name of the img file.

daleski75 said:
Never seen that issue before what happens if you reboot into the bootloader and then connect the phone to your pc and type fastboot boot <name of recovery> does it boot up?
Of course replace the < > with the name of the img file.
Click to expand...
Click to collapse
Yes, TWRP works now, but the backed up unofficial CM 14.1 does not boot.
But, only this TWRP works, booting the official TWRP does not work.
I could probably just use the TWRP file manager to extract the few files from the data partition that I need, but this is a workaround and not a fix, and that is not desired in most cases. Fixing it is hard without someone that still has a broken system.

jcgruenhage said:
Yes, TWRP works now, but the backed up unofficial CM 14.1 does not boot.
But, only this TWRP works, booting the official TWRP does not work.
I could probably just use the TWRP file manager to extract the few files from the data partition that I need, but this is a workaround and not a fix, and that is not desired in most cases. Fixing it is hard without someone that still has a broken system.
Click to expand...
Click to collapse
Yup thats the one I am using as well.

daleski75 said:
Yup thats the one I am using as well.
Click to expand...
Click to collapse
Do you know how one would debug something like that? I have nothing but the splash screen in the beginning and then a black screen
I will just flash CM 14.1 and manually extract my OTP tokens from the data backup, so I don't really need to debug that, but it would probably help determine the cause and properly fix it for the future.

Ask for the link
daleski75 said:
Yup thats the one I am using as well.
Click to expand...
Click to collapse
May I ask which one? the link is dead ...

I am having the same problem, i can't boot into recovery and cant find a way to flash it.
Can someone explain me how to?

ChrisDiM said:
I am having the same problem, i can't boot into recovery and cant find a way to flash it.
Can someone explain me how to?
Click to expand...
Click to collapse
Sorry to hear that. You have to use Qualcomm Drivers to reset your cellphone

Same issue here. Whenever I try to boot into recovery it just goes straight back to the bootloader/fastboot.
**** me, what do I do?

I try "fastboot format userdata" but after i have the same problem with TWRP-3.0.2-1.28

jackalsin said:
Sorry to hear that. You have to use Qualcomm Drivers to reset your cellphone
Click to expand...
Click to collapse
I just found a guide to reset my phone using Qualcomm but my phone doesn't show up on device manager + since this morning my op3 doesn't start up anymore and doesn't react when i plug the charger in.

ChrisDiM said:
I just found a guide to reset my phone using Qualcomm but my phone doesn't show up on device manager + since this morning my op3 doesn't start up anymore and doesn't react when i plug the charger in.
Click to expand...
Click to collapse
Hold power button for at least a minute. It's what I did and fixed it.

DevSquad said:
Hold power button for at least a minute. It's what I did and fixed it.
Click to expand...
Click to collapse
after doing this it showed the OP logo for a few seconds and shut off again :/
Its really a bad moment for me because i had to call a lot a people today and now i can't even start up my phone

ChrisDiM said:
after doing this it showed the OP logo for a few seconds and shut off again :/
Its really a bad moment for me because i had to call a lot a people today and now i can't even start up my phone
Click to expand...
Click to collapse
Can you get into fastboot?
If so, you can sideload a working TWRP via there.

OP3 TWRP not Booting

Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.

Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it

SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Thanks for the reply.
Are you sure what happened to is exactly what happened to you? Because I tried the ToolKit and it is not working. I tried both the versions of the TWRP and Stock recovery.
If you know anything else about this issue that would help me. I'd love to hear it.

SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Also. Does encryption affect this in anyway, because I did it. I don't want to factory reset my phone because this is my primary phone and I don't have another phone. And I don't want to risk it, at least for a few days.

malachiseelam said:
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Click to expand...
Click to collapse
Modified TWRP version should do it

Same, when I flashed cm 14.1 I also got blank TWRP.

michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Then, what did you do?

LS.xD said:
Modified TWRP version should do it
Click to expand...
Click to collapse
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.

malachiseelam said:
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
Click to expand...
Click to collapse
Thanks it worked!

Please try the modified TWRP, 3.0.2-22

Stuck on ''Samsung Galaxy S9'' logo after flashing Custom ROM

Hi guys!
I can root my Galaxy S9 (SM-G960F Exynos variant, build no.: G960FXXU2BRGA, latest build from sammobile). When I want to flash a custom ROM like LineageOS or Resurrektion Remix through TWRP, it remains on the ''Samsung Galaxy s9'' logo after wiping cache and data and rebooting to system.
Before installing any ROM, I wipe the cache, install the ROM, and wipe cache, and then reboot to system. No matter what ROM I flash, it always remains on the logo. I am also able to flash the stock ROM through Odin and install the TWRP in downloading mode and root the device again, but can't flash any custom ROM.
Am I doing something wrong? I appreciate your help!
Thanks in advance!

Update you twrp recovery

I am on the latest build, which is 3.2.3-0.
Vmb265 said:
Update you twrp recovery
Click to expand...
Click to collapse

Ardiswan said:
Hi guys!
I can root my Galaxy S9 (SM-G960F Exynos variant, build no.: G960FXXU2BRGA, latest build from sammobile). When I want to flash a custom ROM like LineageOS or Resurrektion Remix through TWRP, it remains on the ''Samsung Galaxy s9'' logo after wiping cache and data and rebooting to system.
Before installing any ROM, I wipe the cache, install the ROM, and wipe cache, and then reboot to system. No matter what ROM I flash, it always remains on the logo. I am also able to flash the stock ROM through Odin and install the TWRP in downloading mode and root the device again, but can't flash any custom ROM.
Am I doing something wrong? I appreciate your help!
Thanks in advance!
Click to expand...
Click to collapse
Had the same issue. Flash bre5 firmware via twrp.
https://androidfilehost.com/?w=files&flid=272468

I'm having the same issue. I think it's because I'm not on the correct firmware version though. I keep reading that I need to be on BRE5; which I'm currently downloading from updato.com.
---------- Post added at 04:59 PM ---------- Previous post was at 04:56 PM ----------
passion8059 said:
Had the same issue. Flash bre5 firmware via twrp.
https://androidfilehost.com/?w=files&flid=272468
Click to expand...
Click to collapse
How do I flash that via twrp?

Download file from link and reboot to twrp and flash. Phone should boot. If not clean flash.

passion8059 said:
Download file from link and reboot to twrp and flash. Phone should boot. If not clean flash.
Click to expand...
Click to collapse
It doesn't allow me to select the file from the install menu. The download ends with .tar not .zip, so it isn't displaying in the TWRP Install Menu's file explorer. Choosing Install image doesn't make a difference either.

IMissMSN said:
It doesn't allow me to select the file from the install menu. The download ends with .tar not .zip, so it isn't displaying in the TWRP Install Menu's file explorer. Choosing Install image doesn't make a difference either.
Click to expand...
Click to collapse
Flash this before flashing ROM
https://mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo

Vmb265 said:
Flash this before flashing ROM
https://mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
Click to expand...
Click to collapse
Nice, this worked right away; didn't need to reflash the ROM. Thanks very much to you both.

Worked beautifully! Thank you all guys for taking time a responding!
Vmb265 said:
Flash this before flashing ROM
https://mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
Click to expand...
Click to collapse

May I ask in this thread for my own problem?
SM-G960F/DS,
After installing TWRP lastest version, backing up, wipe data, cache, dalvik I installed LineageOS, opengapps and addonsu, rebooted to system and now the screen stucks with the samsung galaxy s9 logo. I am not able to turn off the device since more than 30 minutes. Now I'm waiting for the battery to get empty and then try to reboot into TWRP

Do a battery pull power off by pressing and holding the volume down and power keys at the same time for 10 seconds or until the phone boots up. Between the restart hold the keys to get into TWRP recovery and it'll boot into that. Once there follow the instructions above.

IMissMSN said:
Do a battery pull power off by pressing and holding the volume down and power keys at the same time for 10 seconds or until the phone boots up. Between the restart hold the keys to get into TWRP recovery and it'll boot into that. Once there follow the instructions above.
Click to expand...
Click to collapse
Thanks, well I tried those key combinations with no success
...however, I found the following key combination to restart the phone: POWER + VOLUME DOWN + "homebutton" (at the bottom of the touchscreen, where you would find the home button in older phones)
pressing this combination several seconds restarted the phone. After that I FIRST had to go into download-mode, and after that I could finally enter recovery !!! hurray. Trying to enter recovery at once was not possible. However, now I will try to install.

chrisL17 said:
May I ask in this thread for my own problem?
SM-G960F/DS,
After installing TWRP lastest version, backing up, wipe data, cache, dalvik I installed LineageOS, opengapps and addonsu, rebooted to system and now the screen stucks with the samsung galaxy s9 logo. I am not able to turn off the device since more than 30 minutes. Now I'm waiting for the battery to get empty and then try to reboot into TWRP
Click to expand...
Click to collapse
Flash the file in twrp as los needs BRE5 vendor to boot
https://mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
Any issues then flash lineage zip again and reboot

ASHLEY117 said:
Flash the file in twrp as los needs BRE5 vendor to boot
https://mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
Any issues then flash lineage zip again and reboot
Click to expand...
Click to collapse
Thanks, I will try this later! Really great that kind of fast replies in this forum :good:

ASHLEY117 said:
Flash the file in twrp as los needs BRE5 vendor to boot
https://mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
Any issues then flash lineage zip again and reboot
Click to expand...
Click to collapse
Yes, this works!!!!
Thank you very mich

chrisL17 said:
Yes, this works!!!!
Thank you very mich
Click to expand...
Click to collapse
Nice one, certain ROMs need certain vendors and no worries mate

U guys are awesome, thanks for all the help!

This is really frustrating.
Shouldn't this be added to the lineageOS installation wiki or something?

Vmb265 said:
Flash this before flashing ROM
https://mega.nz/#!PbJAUAxJ!RI7jiQDm7WpeYMZvmURAWsiDMShEt0UPp5YCarvxuDo
Click to expand...
Click to collapse
Hi,
I am having the same problem as the OP (although I am not trying to flash a ROM). Before I flash this random link out of the internet, can you tell me what it is and why it is needed? To educate?
Thanks!

custom roms do not boot up

hi there,
i used crDroidAndroid-8.1-20180606-riva-v4.3 but there were color problems i didnt know 2 fix so i decided 2 flash a new rom resp. a newer version but no custom rom boots up.
when it tries 2 boot is freezes at the boot screen, then screen switches off and nothing happens. i can go 2 fastboot and recovery.
sometimes it boots up but after a few seconds it freezes 2.
i tried different roms and recoveries but nothing works.
i foolishly wiped internal storage once but then i flashed the stock rom again which boots up. then i unlocked the bootloader and flashed a custom recovery and a rom again but the same error is there (no booting up)
anyone got a solution for this problem? no unbricking suggestions plz
edit: im in the wrong thread i think. i wanted 2 post it in "Guides, News, & Discussion". cant delete it. sry for that

logs
so i managed 2 create logs while booting up.
1) https://pastebin.com/cgrX2DA1
2) https://pastebin.com/r7DmcN46
3) https://pastebin.com/0pwXyuys
4) https://pastebin.com/S41FG2SQ
1) is 1st part of the log while booting with no success to boot into the os.
2) is 2nd part of the log while booting with no success to boot into the os.
3) is 1st part of the log while booting with successful boot into the os.
4) is 2nd part of the log while booting with successful boot into the os.
i also tried 2 log "cat /proc/last_kmsg > /sdcard/last_kernel_message_log.txt"
and "dmesg > /sdcard/kernel_boot_log.txt" via terminal in linux but it only sais file or directory not found.
i hope sum1 can give me sum help now.

so i did this https://en.miui.com/thread-3921604-1-1.html but it doesnt help. as i expected.
any1? i can post more information if necessary. just say which and perhaps how ;D

cmon guys. i can impossibly b the only 1 who faces this problem.
i dont think its a hardware thing cause stock rom and android 7.1.2 (viper os) work. maybe a vendor problem? could flash another vendor img solve this problem? can sum1 send me his?
i got sum more logs after flashing rr 7.0:
logcat 1st part: https://pastebin.com/EBZAgbhF
logcat 2nd part: https://pastebin.com/qaMFrvxi
dmesg: https://pastebin.com/Gg8bYkJy
cheers

Fastboot flash latest miui 10 stable using mi flash tool and use the rom after setting up. Then flash custom recovery and do a full wipe.
This works for most cases.

NaAnBcEhEuL9A8K7 said:
Fastboot flash latest miui 10 stable using mi flash tool and use the rom after setting up. Then flash custom recovery and do a full wipe.
This works for most cases.
Click to expand...
Click to collapse
thx for ur answer but i tried this already. does not work on android 8 and 9 roms

daemonicvs said:
thx for ur answer but i tried this already. does not work on android 8 and 9 roms
Click to expand...
Click to collapse
Well it worked for me.
Which custom rom you want to use?

well, it doesnt matter 2 me. the main thing is that it works =D rr, aex, crdroid..

daemonicvs said:
well, it doesnt matter 2 me. the main thing is that it works =D rr, aex, crdroid..
Click to expand...
Click to collapse
Crdroid is my choice because aex and rr are very early builds. I like pixel experience but the devs not updating it so crdroid or havoc os.
Like i said use Xiaomi flash tool and flash miui 10 stable via fastboot method(there are 3 options in the bottom select flash all instead of flash and lock to avoid unlocking the bootloader again), don't flash anything else, setup and use the phone, flash recovery wipe all and format, install rom, don't flash gapps yet, boot into rom and see if its fixed.
Use vendor based recovery, if using batik recovery you have to flash batik recovery again after format.
This is my solution.

NaAnBcEhEuL9A8K7 said:
Crdroid is my choice because aex and rr are very early builds. I like pixel experience but the devs not updating it so crdroid or havoc os.
Like i said use Xiaomi flash tool and flash miui 10 stable via fastboot method(there are 3 options in the bottom select flash all instead of flash and lock to avoid unlocking the bootloader again), don't flash anything else, setup and use the phone, flash recovery wipe all and format, install rom, don't flash gapps yet, boot into rom and see if its fixed.
Use vendor based recovery, if using batik recovery you have to flash batik recovery again after format.
This is my solution.
Click to expand...
Click to collapse
i did it several times before but 2 b safe i did it again like that:
i flashed riva_global_images_V10.1.1.0.NCKMIFI_20181029.0000.00_7.1_global_f444c158ed.tgz using XIAOMI-TOOL-MiFlash-for-Linux-by-IceMan-master. im on linux mint 18.3. i have 4 options:
flash_all_lock.sh
flash_all_lock_crc.sh
flash_all_except_data_storage.sh
flash_all.sh
i chose flash_all.sh
i booted into the stock rom and set it up, enabled dev options and adb.
then i switched it off, went into bootloader, flashed twrp-3.2.3-0-riva.img via fastboot.
after that i entered twrp, flashed OrangeFox-R8.3-riva.zip and rebooted into recovery
i wiped everything except external sd and usb otg (i dont have these)
after a reboot intorecovery i formatted data then rebooted in recovery
i flahed crDroidAndroid-9.0-20181002-riva-v5.0.zip
then reboot into system
no success as i expected! wtf is wrong wtf. this cant b true!
but thank u very much for ur efforts! perhaps i would try 2 restore a vendor img from sum1 which rom does work. i know its a great demand but could u send me urs? ;D i dont know if there r sum personal info..
best regards

Don't give up there might be a solution.
Pray to God for some help.
:good:
---------- Post added at 01:23 PM ---------- Previous post was at 12:59 PM ----------
Currently I am using Xiaomi.eu beta rom. You can check their website for all the features. Its smooth, stable and can update without needing to got the recovery:victory:
This should work for you because unlike other roms this is based on miui for riva. That means you will get updates till Xiaomi ditches support for riva.
I recommend you use this rom over the global rom until you fix the problem with your phone.
Some things missing:
Choice of region is limited( India is not available)
There is no custom kernel available for miui oreo as of now.
Magisk safetynet not passed
If you're going flash this rom you need to be on latest global beta fastboot rom and need a recovery that supports oreo base.
I use batik recovery base oreo.

yes. i cant b the only 1 facing this problem...!? really. i cant!
thx anyway

daemonicvs said:
yes. i cant b the only 1 facing this problem...!? really. i cant!
thx anyway
Click to expand...
Click to collapse
Maybe you can be the only one facing this problem.
Try joing telegram community maybe your problem will get fixed from there.

NaAnBcEhEuL9A8K7 said:
Maybe you can be the only one facing this problem.
Try joing telegram community maybe your problem will get fixed from there.
Click to expand...
Click to collapse
theres no difference between my device and yours... everybody must have this problem ;/

daemonicvs said:
theres no difference between my device and yours... everybody must have this problem ;/
Click to expand...
Click to collapse
Did you try edl method?

NaAnBcEhEuL9A8K7 said:
Did you try edl method?
Click to expand...
Click to collapse
yes. i could flash the stock rom this way but the problem is not solved this way

daemonicvs said:
yes. i could flash the stock rom this way but the problem is not solved this way
Click to expand...
Click to collapse
At least you have to try.

I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.

Eddyb299 said:
I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.
Click to expand...
Click to collapse
Did you flash lazy flasher?

Eddyb299 said:
I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.
Click to expand...
Click to collapse
dont u have 2 wait 2 weeks or so till bootloader is unlocked?
what exactly do u mean with won't boot up? bootloop? or stuck at boot logo?
after flashing a custom recovery, did u boot directly into the system or did u try 2 boot into recovery? sometimes the stock recovery overwrites the custom 1 when stock rom boots up
my problem is solved. i remembered that i made a full nandroid backup with twrp before i flashed a new rom and the problem appeared. so i restored everything i backed up with twrp (incl cust) and voila, rom booted up. and i can wipe system and data and flash every rom i wanna and it still boots up \o/
i really could have tried it earlier but i didnt think of this untill yesterday ;D
well, thx for ur efforts anyway buddy @NaAnBcEhEuL9A8K7
cheers