Related
Just bought a nexus 7.
And I am looking for a case which is exactly like the ipad smart cover (with no back cover) and magnetic
I have only found ones with back and front.
Thanks
Sent from my GT-I9300 using Tapatalk 2
I want one like that too but unfortunately I think the point ones available are the ones with the back cover
mcdevtingz said:
Just bought a nexus 7.
And I am looking for a case which is exactly like the ipad smart cover (with no back cover) and magnetic
I have only found ones with back and front.
Thanks
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
The iPad smart cover attaches with magnets. The iPad is made out of aluminum. The Nexus 7 is all plastic.
Don't think aluminum is magnetic.
Sent from my SCH-I535 using Tapatalk 4
philburkhardt said:
The iPad smart cover attaches with magnets. The iPad is made out of aluminum. The Nexus 7 is all plastic.
Click to expand...
Click to collapse
Aluminium isnt magnetic haha
Ipad has a magnetic strip in it. Which the nexus 7 does as well
Sent from my GT-I9300 using Tapatalk 2
mcdevtingz said:
Aluminium isnt magnetic haha
Ipad has a magnetic strip in it. Which the nexus 7 does as well
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Regardless, no the nexus 7 does not have the same kind of magnetic strip. The iPad has magnets in place that match up exactly with the smart cover magnets. You can see it here:
http://www.ifixit.com/Teardown/iPad+2+Smart+Cover+Teardown/5089/1
Regardless of my flub with aluminum, You can wish for it all you want. it isn't going to happen. There were magnets in the first generation N7, too, and no magnet attachable covers.
---------- Post added at 02:45 PM ---------- Previous post was at 02:37 PM ----------
highfigh said:
Don't think aluminum is magnetic.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Yeah, I should have known better. That's what I get for posting on a Monday
philburkhardt said:
Regardless, no the nexus 7 does not have the same kind of magnetic strip. The iPad has magnets in place that match up exactly with the smart cover magnets. You can see it here:
http://www.ifixit.com/Teardown/iPad+2+Smart+Cover+Teardown/5089/1
Regardless of my flub with aluminum, You can wish for it all you want. it isn't going to happen. There were magnets in the first generation N7, too, and no magnet attachable covers.
---------- Post added at 02:45 PM ---------- Previous post was at 02:37 PM ----------
Yeah, I should have known better. That's what I get for posting on a Monday
Click to expand...
Click to collapse
This exists though?
http://www.amazon.co.uk/gp/aw/d/B008GSMRAY
Sent from my GT-I9300 using Tapatalk 2
The wake sleep function does, sure. The case you are linking to covers the back too. I have a case like that for my old Nexus 7. Hey believe me, I wish they would put out a cover without a back on it. Someone could totally manufacture one that works like the cover for the Galaxy Note. Where the case actually replaces the back cover completely, and replaces it with a back cover that has the front cover attached.
Like this:
http://www.amazon.com/Samsung-Galax...1377554100&sr=8-1&keywords=galaxy+note+2+case
Yeah true my S4 is like that
Does having it on the back make it much thicker?
Sent from my GT-I9300 using Tapatalk 2
mcdevtingz said:
Yeah true my S4 is like that
Does having it on the back make it much thicker?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
It depends on the case. I had the Poetic hand strap one, and it added more bulk than I would like. But there's also a Poetic slimline that looks a lot better. The official premium Asus cover is supposed to be great as far as bulk is concerned, but it isn't a smart cover. No idea why they didn't slip a magnet in there.
philburkhardt said:
It depends on the case. I had the Poetic hand strap one, and it added more bulk than I would like. But there's also a Poetic slimline that looks a lot better. The official premium Asus cover is supposed to be great as far as bulk is concerned, but it isn't a smart cover. No idea why they didn't slip a magnet in there.
Click to expand...
Click to collapse
Asus didn't slip it in there to avoid being sued by apple cuz they own the patent.
Sent from my Nexus 7 using Tapatalk 2
The patent of a magnet in a case?!
Sent from my GT-I9300 using Tapatalk 2
philburkhardt said:
It depends on the case. I had the Poetic hand strap one, and it added more bulk than I would like. But there's also a Poetic slimline that looks a lot better. The official premium Asus cover is supposed to be great as far as bulk is concerned, but it isn't a smart cover. No idea why they didn't slip a magnet in there.
Click to expand...
Click to collapse
Lemme guess ... because they knew about the magnet-wakingUp issue with the Nexus 7 ?!?
Or maybe it's the otherway around, they didn't test the feature since their covers doesn't have the magnet ?!?
It appears that some/many N7s are having the wake-up issue with SmartCovers.
If you have one of these Tabs, turn on the Bluetooth for now.
hyperxguy said:
Lemme guess ... because they knew about the magnet-wakingUp issue with the Nexus 7 ?!?
Or maybe it's the otherway around, they didn't test the feature since their covers doesn't have the magnet ?!?
It appears that some/many N7s are having the wake-up issue with SmartCovers.
If you have one of these Tabs, turn on the Bluetooth for now.
Click to expand...
Click to collapse
What magnet waking up issue? I had the Poetic hand strap smart cover on my gen 1 nexus 7 for an entire year, and it worked just like it was supposed to. There were issues with the cases with magnets when the first started releasing them. That was because they were using magnets that were too strong, and would put the n7 back to sleep if you folded the front cover back. I had this issue with the first cover I got from Poetic. There was pretty considerable backlash, and they fixed the problem within a few days. They even sent out free cases with the updated magnet to anyone that bought the problematic ones.
I guess you're one of those lucky owners without this issue.
But many are having this issue for real, just google it or visit some of the threads here in XDA.
I noticed you mentioned 2012 Nexus 7. I have one with a 3rd-gen Poetic, so I know what you say.
This is a 2013 Nexus 7 thread, no ?
hyperxguy said:
Lemme guess ... because they knew about the magnet-wakingUp issue with the Nexus 7 ?!?
Or maybe it's the otherway around, they didn't test the feature since their covers doesn't have the magnet ?!?
It appears that some/many N7s are having the wake-up issue with SmartCovers.
If you have one of these Tabs, turn on the Bluetooth for now.
Click to expand...
Click to collapse
philburkhardt said:
What magnet waking up issue? I had the Poetic hand strap smart cover on my gen 1 nexus 7 for an entire year, and it worked just like it was supposed to. There were issues with the cases with magnets when the first started releasing them. That was because they were using magnets that were too strong, and would put the n7 back to sleep if you folded the front cover back. I had this issue with the first cover I got from Poetic. There was pretty considerable backlash, and they fixed the problem within a few days. They even sent out free cases with the updated magnet to anyone that bought the problematic ones.
Click to expand...
Click to collapse
Yeah, I have no idea what he's talking about either. My N7 (2012 and 2013) had no issues with waking up, and I had smart-covers on both of them.
You're a lucky owner then.
I said some/many not ALL (tablets to have this issue).
I got the moko ultra slim and while it does add minimal bulk, it would be nice if they could just make the piece that attached to the back adhesive like the skins are. I'm thinking I may buy another one and try and hack it to achieve this.
Sent from my Nexus 7 using XDA Premium 4 mobile app
hyperxguy said:
You're a lucky owner then.
I said some/many not ALL (tablets to have this issue).
Click to expand...
Click to collapse
I have the not waking up a smart cover issue only if I have an app like kindle open in I close the cover. If there is no app active, I have no issue. Maybe that is actually everyone's issue?
Smart covers are overrated. Just press the damn button and if you don't feel like pressing the button when you close your case then just wait the 30 seconds to a minute it takes your screen to timeout.
If I purchased the Poetic Ultra Slim, I would remove the magnet!
Thanks _MetalHead_ for the recommendation.
The case came today and I like it quite a bit. I hate the idea of any case at all, but this is one I can live with.
Told ya! Glad you like it. :good:
Link?
Sent from my XT1058 using Tapatalk 4
---------- Post added at 08:50 PM ---------- Previous post was at 08:46 PM ----------
Nevermind. Found it on Amazon. Is it cheaper anywhere else? I like the blue one. It would look good with my royal blue back!
Sent from my XT1058 using Tapatalk 4
---------- Post added at 08:54 PM ---------- Previous post was at 08:50 PM ----------
Haha also found on eBay. Is a little cheaper there. They have some bumpers on ebay as well
Sent from my XT1058 using Tapatalk 4
gunnyman said:
Thanks _MetalHead_ for the recommendation.
The case came today and I like it quite a bit. I hate the idea of any case at all, but this is one I can live with.
Click to expand...
Click to collapse
Hey Griffins my name!
MrGriffdude said:
Hey Griffins my name!
Click to expand...
Click to collapse
And what do you have to Reveal?
Sent from my XT1058 using XDA Premium 4 mobile app
I really like my reveal case so far; except it seems like a really tight fit for the phone. Wish I would have realized that the Griffin site had them $10 cheaper than Motorola and in multiple colors.
Any pictures of the Reveal docked with the desk or car docks?
I bought one of these on ebay. I took your word for it. If it's junk I'll send you the bill. Haha just kidding. It looks pretty sweet. I hate cases, but this one looks like one I can live with.
Sent from my XT1058 using Tapatalk 4
lensgrabber said:
Any pictures of the Reveal docked with the desk or car docks?
Click to expand...
Click to collapse
It should fit with the official dock and car dock... dunno how it'd look though
Hii
Can you post some pictures of it....???"
lensgrabber said:
Any pictures of the Reveal docked with the desk or car docks?
Click to expand...
Click to collapse
I have an O'Box Commuter and am receiving a Reveal and the official car dock today. I will take pictures of the phone with both cases in the dock (assuming they both fit).
I got my Reveal case a couple days ago and I have to admit, I really like it! I bought a case from Motorola. A clear snap on hard case and took it off right away. I also got a Bear Motion case on Amazon that I never used. This reveal case has stayed on since I got it! The blue matches perfectly with the royal blue back of my phone. Thanks guys for the recommendation on this case.
just got my reveal today.
really nice case!!
cost $20 on ebay, which is not really cheap for a case. but i had a cheapo "cimo s-line" on my phone before that that cost me like $3-4. this is much nicer looking, the buttons click better and its actually feels slightly smaller in hand. it really is a small case.
i think its worth it, feels a little better and looks much nicer (the s-line case looked terrible). given im a klutz who manages to knock my phone off a table or something nearly every day it seems like a case was needed. (probably dropped my moto x like 4-5 times this week...)
fit and finish on the reveal is perfect. some part of me wishes i had a phone that wasnt just black weave now, to show off with the see through part.
i do have to say one thing.
this case the clear part scratches up really easily. i put the phone + case my desk plastic side down and there were a ton of fine scratches. tried to polish them out with some meguirs plastx that i had (works great on car dash guages by the way) and it made even more. yes its a case, and its made to be scratched, but be aware the ones wth these hard plastic finishes seem to scratch up quick
sleepyguy007 said:
i do have to say one thing.
this case the clear part scratches up really easily. i put the phone + case my desk plastic side down and there were a ton of fine scratches. tried to polish them out with some meguirs plastx that i had (works great on car dash guages by the way) and it made even more. yes its a case, and its made to be scratched, but be aware the ones wth these hard plastic finishes seem to scratch up quick
Click to expand...
Click to collapse
Yeah, mine is all scratched up too but it's because it gets tossed in my tool bag. I'd rather the case get scratched than my phone!
Anyone tried casemate's naked tough case? Is this pretty much the same one
Sent from my XT1058 using Tapatalk
The power support aire jacket case has some self healing coating on it that seems to not scratch as easy as the Griffin. I have both and the air jacket is higher quality. My reveal came in the box with lots of scratches straight from Motorola.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Anyone notice how easy it is to dent or scratch the chrome edge border around the phone? I have babied mine to the maximum extent, and when inspecting it today I see very small dent like imperfections on two corners of my note 3. No idea how they got there but it's annoying.
Is everyone's like this?
Sent from my SM-N900T using Tapatalk
Please read forum rules before posting
Questions and help issues go in the Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
dandan112988 said:
Anyone notice how easy it is to dent or scratch the chrome edge border around the phone? I have babied mine to the maximum extent, and when inspecting it today I see very small dent like imperfections on two corners of my note 3. No idea how they got there but it's annoying.
Is everyone's like this?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I noticed the same thing. My son also has the same on his. I could not wait to get a case on it just to avoid any other dents or blemishes. Like you I babied my phone to the max. Fortunately the case covers the one small blemish...
Remember its plastic
Dings, chips, peeling etc are all mitigated by using a case.
The phone case is plastic which makes it work best for signals, light for lesser weight and provides some shock prevention when dropped. Metal cases, weaken signals, are typically heavier and don't provide much shock prevention when dropped (ie metal doesn't give).
I see they sell middle housings to replace damaged ones. Same thing with back housing where the camera lens is. Problem is, how would you take the screen off the middle housing to replace just the housing. They sell a more expensive screen and middle housing combo, but for much more money and it's unnecessary if the current screen is perfect.
Sent from my SM-N900T using Tapatalk
The chromed plastic bezel is indeed incredibly fragile...it kinda sucks actually. I'm waiting to get my Ballistic SG MAXX case and have had my phone for a month without protection now (it takes soooo long for the good cases to be released). I've been EXTRA careful but noticed that I slightly dented it just by putting the phone face down on a table...gently. So right now it's sitting either in my pocket or on a napkin on my desk so as not to scratch/dent the bezel or scratch the camera...can't wait to get my case.
lightpsycho said:
The chromed plastic bezel is indeed incredibly fragile...it kinda sucks actually. I'm waiting to get my Ballistic SG MAXX case and have had my phone for a month without protection now (it takes soooo long for the good cases to be released). I've been EXTRA careful but noticed that I slightly dented it just by putting the phone face down on a table...gently. So right now it's sitting either in my pocket or on a napkin on my desk so as not to scratch/dent the bezel or scratch the camera...can't wait to get my case.
Click to expand...
Click to collapse
Just remember, if anyone buys a hybrid case that is hard on the inside it will scuff the chrome bezel. I use soft on the inside and hard on the outside.
Yeah I know, learned this with Otterbox some years ago. Thankfully, Ballistic Cases are soft on the inside (as are Trident Case also).
Sent from my SM900W8 Note 3 using xda-devs app. And my fingers.
Any ideas on middle housing replacement?
Sent from my SM-N900T using Tapatalk
lightpsycho said:
Yeah I know, learned this with Otterbox some years ago. Thankfully, Ballistic Cases are soft on the inside (as are Trident Case also).
Sent from my SM900W8 Note 3 using xda-devs app. And my fingers.
Click to expand...
Click to collapse
Same here mate. After about a year with an otterbox defender I removed the iphone 4s from it and noticed scuffs on the corners of the phone. Lesson learned.
---------- Post added at 02:04 PM ---------- Previous post was at 02:03 PM ----------
dandan112988 said:
Any ideas on middle housing replacement?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Looks like a complete strip down is required to change this part, part seems to be the main chasis of the handset.
Limeybastard said:
Same here mate. After about a year with an otterbox defender I removed the iphone 4s from it and noticed scuffs on the corners of the phone. Lesson learned.
---------- Post added at 02:04 PM ---------- Previous post was at 02:03 PM ----------
Looks like a complete strip down is required to change this part, part seems to be the main chasis of the handset.
Click to expand...
Click to collapse
Any idea how to get the screen off of the existing?
Sent from my SM-N900T using Tapatalk
dandan112988 said:
Any idea how to get the screen off of the existing?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Look on youtube. You need to find a video showing taking screen and digitizer off at the same time. You do not want to remove the glass only.
Limeybastard said:
Look on youtube. You need to find a video showing taking screen and digitizer off at the same time. You do not want to remove the glass only.
Click to expand...
Click to collapse
No one has done it yet for the note 3 sadly. I wish it was like the note 2 where the back housing also covered the sides, so replacing the back housing replaced everything visible but the screen
Sent from my SM-N900T using Tapatalk
dandan112988 said:
No one has done it yet for the note 3 sadly. I wish it was like the note 2 where the back housing also covered the sides, so replacing the back housing replaced everything visible but the screen
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I know no one has done it yet. The principle as far as I am aware is the same, total strip down. Once stripped down put all the parts back in the new chasis.
Limeybastard said:
I know no one has done it yet. The principle as far as I am aware is the same, total strip down. Once stripped down put all the parts back in the new chasis.
Click to expand...
Click to collapse
The stripping it down isn't too hard as far as back cover and internals . It's the Damn screen removal that scares me lol
Sent from my SM-N900T using Tapatalk
dandan112988 said:
The stripping it down isn't too hard as far as back cover and internals . It's the Damn screen removal that scares me lol
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
If it bothers you, I would perhaps sell your existing Note 3 and get another one.
Limeybastard said:
If it bothers you, I would perhaps sell your existing Note 3 and get another one.
Click to expand...
Click to collapse
Eh, I don't like using cases, makes the phone feel like crap. And with how delicate the chrome is, it is bound to show them. I just like to have a spare to swap out when mine gets bad, puts my mind at ease. Unfortunately it's very difficult to do with the chrome area on this phone as it's part of what's bonded to the screen, and not the back assembly
Sent from my SM-N900T using Tapatalk
Very fragile indeed. I used a butter knife to lift off the battery door and dented it. Have had a cheap soft TPU case on it since day one though and I would not use it without one
Cases take away from the beauty and feel of the phone though
Sent from my SM-N900T using Tapatalk
http://www.casefanatic.com/lg/nexus-5/coque-kommandant-nexus-5-ultra-thin-metal-aluminium-case/
Someone know anything about this case? Looks very cool. But back side is plastic, and looks pretty scratchable. If someone has this case, please give more details
Sent from my Nexus 5 using Tapatalk
Looks really awesome
I also see that http://www.amazon.com/DAYJOY-Luxury...sbs_cps_2?ie=UTF8&refRID=0DV7M5WRYSMTDK6H44X4
But xibicen logo is really ugly and i don't like pattern around camera
Sent from my Nexus 5 using Tapatalk
Those both look awesome, the one on Amazon especially reminds me of a Raspberry Pi case I got from the Czech Republic, I just wonder how they do with drop protection.
Joshmccullough said:
I just wonder how they do with drop protection.
Click to expand...
Click to collapse
That was my concern. I want more information on any type of paddind around the corners. Basically you protect theh phone from dings from drops but that does you no good when the screen shatters from the shock/impact. I used to have a hard plastic case for my GS3 and I dropped it taking it out of my pocket. The screen cracked but the body of the phone was fine. You wouldn't be able to tell by looking at the phone itself that it was ever dropped after replacing the screen unless you looked on the case.
A review of the Kommandment case:
http://www.reddit.com/r/Nexus5/comments/1xdzsz/so_kommandment_case_came_in_today/
I wouldn't bother with any full metal case - wireless signal will be severely affected.
cf18 said:
A review of the Kommandment case:
http://www.reddit.com/r/Nexus5/comments/1xdzsz/so_kommandment_case_came_in_today/
I wouldn't bother with any full metal case - wireless signal will be severely affected.
Click to expand...
Click to collapse
That was my second question, thanks for beating me to the punch
---------- Post added at 04:50 PM ---------- Previous post was at 04:49 PM ----------
jiannichan said:
That was my concern. I want more information on any type of paddind around the corners. Basically you protect theh phone from dings from drops but that does you no good when the screen shatters from the shock/impact. I used to have a hard plastic case for my GS3 and I dropped it taking it out of my pocket. The screen cracked but the body of the phone was fine. You wouldn't be able to tell by looking at the phone itself that it was ever dropped after replacing the screen unless you looked on the case.
Click to expand...
Click to collapse
The Reddit review posted a couple above here speaks to that: apparently it's a great looking case, but no drop protection/bumpering, just surface protection. Darn, because that's a snazzy-looking case.
I have this case and from my experience, i did not have any issues with reception. I was worried at first forking out that much money for a case. The plastic window (separate piece) does get scratched easily. My one came with a few deep scratches. i contacted support and they were happy enough to send me a replacement piece. The case is very nice and premium to the feel.
In the picture the back is not 100% plastic. Only the window. The back frame (black part) surrounding the windows is aluminum.
Pros
- Very premium and unique compared to all the other cases
- Did not have any wifi/reception issues (Personally)
- Not an iphone fan but i do love the build quality of them and this case will make you feel like you're holding a oversized iphone 4/4s/5/5s
Cons
- Back plastic will get scratched from general wear and tear.
- If you look close enough you will see some imperfections like the volume buttons look a bit scratched (not painted properly? didn't worry me)
Other than those, i love this case. Yes, it is very expensive but i cannot find any other case like this.
@dragon884 can you share few pics?
Sent from my Nexus 5 using Tapatalk
And how about this? Is anyone bought this one? http://www.amazon.com/DAYJOY-Luxury...sbs_cps_2?ie=UTF8&refRID=0DV7M5WRYSMTDK6H44X4
Sent from my Nexus 5 using Tapatalk
defrt said:
@dragon884 can you share few pics?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Hope these help.
@dragon884 thanks very much, i wonder.. Back side quadrant like a iphone or ellipseoid like a nexus 5 back ..? Do you understand what I mean?
Sent from my Nexus 5 using Tapatalk
defrt said:
@dragon884 thanks very much, i wonder.. Back side quadrant like a iphone or ellipseoid like a nexus 5 back ..? Do you understand what I mean?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Nope...not sure what it means...
Case's back side like an iphone or like original nexus 5. I mean ergonomic design
Sent from my Nexus 5 using Tapatalk
defrt said:
Case's back side like an iphone or like original nexus 5. I mean ergonomic design
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Iphone. It's a flat back.
Cool. Case amazing but i don't like plastic window. Today I requested to kommandant over casefanatic for full aluminum back side
Sent from my Nexus 5 using Tapatalk
defrt said:
Cool. Case amazing but i don't like plastic window. Today I requested to kommandant over casefanatic for full aluminum back side
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
ok, just remember that a full alumium back will affect reception.
The link for the Dayjoy black case has no reviews but if you go to the white one :
http://www.amazon.com/DAYJOY-Luxury...4-5171312?ie=UTF8&refRID=0H696MXPVT92CKH9ZMYJ
There are 2 reviews and both of them wrote that it affects reception. Goodluck finding a case!!!
I just talk with casefanatic guy, hi told me, they release scratch resistant plastic window like a iphone glass in few days and same price ???
Sent from my Nexus 5 using Tapatalk
dragon884 said:
Hope these help.
Click to expand...
Click to collapse
You can/should take off that IMEI sticker from the back of your phone.
You can still access it in your about phone settings, and it is also on the box your phone came in.
New kommandant back plate is out, but i don't know how it looks on black nexus 5... Any ideas??
Sent from my Nexus 5 using Tapatalk
I guess OtterBox finally thought the 1+2 deserved some love!
PatrickC said:
I guess OtterBox finally thought the 1+2 deserved some love!
Click to expand...
Click to collapse
My issue with rugged case or flip cases for Oneplus two is they make the already bulky phone even more bulky and to be honest two is a stone should not be damaged easily
samir_a said:
My issue with rugged case or flip cases for Oneplus two is they make the already bulky phone even more bulky and to be honest two is a stone should not be damaged easily
Click to expand...
Click to collapse
Some people need rugged protection. I used to work outside in rough environments. It would be stupid of me not to have a rugged case in those conditions.
jkbane said:
Some people need rugged protection. I used to work outside in rough environments. It would be stupid of me not to have a rugged case in those conditions.
Click to expand...
Click to collapse
Yeah fair point but I'm thinking nothing could beat the protection of a flip case.. An otterbox has the fatal flaw of not protecting the screen.. Undeniably the most important part.
Stevles said:
Yeah fair point but I'm thinking nothing could beat the protection of a flip case.. An otterbox has the fatal flaw of not protecting the screen.. Undeniably the most important part.
Click to expand...
Click to collapse
My favorite combo though is a case like this and tempered glass screen protector.
Will this case even work with a tempered glass protector?
Yes that's what I have at the minute.....
Sent from my ONE A2003 using XDA Free mobile app
At this moment there back in stock.
-Oneplus 2 A2005-
Want to buy one but no stock
I couldn't help myself, I grabbed a black one and a red/white one, slapped the black plastic cover over the red TPU. Suffice it to say, it looks pretty dope.
return.of.octobot said:
I couldn't help myself, I grabbed a black one and a red/white one, slapped the black plastic cover over the red TPU. Suffice it to say, it looks pretty dope.
Click to expand...
Click to collapse
I was thinking about doing the same thing, but I chose to just stick with the all black since I was being cheap and didn't want to buy 2 otterbox cases lol. I don't know why they didn't make that an option for the case anyway
kyleastley said:
Yes that's what I have at the minute.....
Sent from my ONE A2003 using XDA Free mobile app
Click to expand...
Click to collapse
What protector? Is it aligned under the plastic or inline with it?
---------- Post added at 11:48 AM ---------- Previous post was at 11:43 AM ----------
Crackdroid said:
I was thinking about doing the same thing, but I chose to just stick with the all black since I was being cheap and didn't want to buy 2 otterbox cases lol. I don't know why they didn't make that an option for the case anyway
Click to expand...
Click to collapse
Agreed, that white case is ugly..
Could always paint it (primed colour innit)
return.of.octobot said:
I couldn't help myself, I grabbed a black one and a red/white one, slapped the black plastic cover over the red TPU. Suffice it to say, it looks pretty dope.
Click to expand...
Click to collapse
show and tell show and tell!