Hi friends,
For global user want to get DIN2 work on GSM with VU 2.39 (fully Sense 3), here we go:
(Please test this patchs with your own risk).
Step-by-step guide:
1. Fully wipe your system
2. Install VU 2.39 via CM and donot reboot, go to next step
3. Flash GSM Patch and reboot
4. There something let you force close but just ignore it
5. Goto Wireless & Networks Setting and set your preferred Network to GSM only (ignore FC)
6. Goto GSM/UMTS Options and set/save your APN; then reboot
7. Now you have your phone with VU 2.39 fully work on GSM. You could choose GSM or WCDMA (3G) via GSM/UMTS Options/Network Mode (or you can set in Testing Menu: use dialer and dial *#*#4636#*#*; then go into Phone Information and set your preferred network type).
Link: http://www.multiupload.com/6MFQ61312D
Great thank to Virtuous Team for their beautiful Sense rom!
Great thank to Newtoroot (from themikmik.com) for his GSM patch!
Have fun.
Thanks a lot~
will try today!
installed... for now all is going right... i will lwt you know...
duchoang81 said:
Hi friends,
For global user want to get DIN2 work on GSM with VU 2.39 (fully Sense 3), here we go:
(Please test this patchs with your own risk).
Step-by-step guide:
1. Fully wipe your system
2. Install VU 2.39 via CM and donot reboot, go to next step
3. Flash GSM Patch and reboot
4. There something let you force close but just ignore it
5. Goto Wireless & Networks Setting and set your preferred Network to GSM only (ignore FC)
6. Goto GSM/UMTS Options and set/save your APN; then reboot
7. Now you have your phone with VU 2.39 fully work on GSM. You could choose GSM or WCDMA (3G) via GSM/UMTS Options/Network Mode (or you can set in Testing Menu: use dialer and dial *#*#4636#*#*; then go into Phone Information and set your preferred network type).
Link: http://www.multiupload.com/6MFQ61312D
Great thank to Virtuous Team for their beautiful Sense rom!
Great thank to Newtoroot (from themikmik.com) for his GSM patch!
Have fun.
Click to expand...
Click to collapse
Please continue with next version of Virtuons . thanks so much
i don't know if it is the patch or what else, but next the battery i have that simbol...
what it means and how i can remove it? thnaks
Haha , also have this symbol since i flash this patch and my 3G don't want to load , no 3G icon
Hi zozor, did you set your APN and reboot? My experiment that I have to set APN manually. And I have to change the network type in Testing Menu (use dialer and dial *#*#4636#*#*).
I am doing it right now
I can not get the APN list , how do you do it, and the 3G icon disappear when settings
zozor said:
Haha , also have this symbol since i flash this patch and my 3G don't want to load , no 3G icon
Click to expand...
Click to collapse
have you enabled mobile networks and setted up the apn?
if you having problem with the apn you can try the patch for the mms on the virtuos unity discussion, post number 4
i solved with an app called "apn italiani" , it delete all the older apn and setup the working ones....
---------- Post added at 07:18 AM ---------- Previous post was at 07:10 AM ----------
zozor said:
I am doing it right now
I can not get the APN list , how do you do it, and the 3G icon disappear when settings
Click to expand...
Click to collapse
look on the virtuous unity forum, inc2 section, batteri,35,crossair mod...
I already done this , but nothing happen still not have 3G , gprs . edge ,nothing to get internet ,
Any way to add GPS function without a wipe? I'm usually CDMA, but will be in Europe for a week. I was just planning to reload Vivow Stock ROM which works great with Sim/CDMA (used it last month). Seem like a full wipe will set me back far more time and hassle-wise than going to stock for a week and then back to VU2.3.9 when I return.
Thanks a lot
thanks , Do you intend to issue a GSM Patch for the New Rom Virtuous Affinity ?
I've been waiting for some kind of problems with this patch but.. NOTHING HAPPENS!
THIS IS A GREAT WORK MAN! YOU'VE GOT A PIECE OF HEAVEN 'CAUSE THIS PATCH!
GREAT!!
Just took the chance and went back to my VU 2.39 while in Rome. Loaded the patch WITHOUT any wipe at all. Rebooted and the sim card I bought here works for my data and for phone no problem whatsoever.
I do not have choice on my phone to select GSM only... just GSM/UMTS. When I hit this, no further options occur.
is anyone can help me to mirroring the rom?
i want to try this rom..
Will post in Some time
---------- Post added at 11:20 AM ---------- Previous post was at 10:42 AM ----------
[/COLOR]
JahatHNc said:
is anyone can help me to mirroring the rom?
i want to try this rom..
Click to expand...
Click to collapse
http://www.4shared.com/zip/5QYRIpVK/VU2390_Relay_Final3_VZ_2.html
http://www.4shared.com/zip/3AJoS7hN/GSM_Patch_VU_2_39_tested.html
[ROM][4.4.2][LG G3 Port][6-29-2014]2FacedRom 1.6/1.7.1x Stock, Debloated, US GSM Unlocked
Please read everything before downloading and blindly installing!
Firstly, this ROM does install properly, it does boot, if you brick your phone while running this ROM chances are it was something YOU did and not the ROM, do not blame me. Secondly, I will keep this as up to date and fix things or add things as often as I can there is a Requested Features tab at the top and if you want something you need to say it there. There is also a Report Bugs tab at the top, same applies. I am the only person maintaining this project right now and I cannot read every post in this thread but I will do my best to stay on top of everything.
The rom is a port from the UK LG G3 but options for GSM or CDMA capabilities are select-able in Aroma. NFC does not work currently and may not work until the LS990 is released and dumped.
The CDMA configurations is still buggy and I am working on fixing it, update 1.7 will see a lot of fixes to the CDMA configuration. The phone app crashes when trying to call out but the phone can receive calls when CDMA is selected on install. Thats the biggest problem I've found so far.
v1.6
Changlog in 3rd post
Moderator Edit: Link Removed
MD5: 8920b27fd59e08bae905d27266605d79
Working:
Pretty much everything except what is listed below
Not Working:
NFC (Both CDMA and GSM)
Calling Out (CDMA Only)
Settings FC on some menus (CDMA Only)
1.7.1 Experimental!
CDMA ONLY
For SMS/MMS use Hangouts!
Data does work but you cannot Enable/Disable it in settings or change network settings.
The phone will show "Roaming" but it won't actually be roaming.
Since this is experimental and for CDMA ONLY, only install with a clean flash.
Do not install if you are on a GSM network, for GSM stay with 1.6
To Install if coming from other ROM or 2Faced 1.0
1. Must be coming from ZVC Rom
2. Reboot to Recovery and Perform full backup
3. Wipe Dalvik Cache, System, Data, Cache
4. Install Rom
5. Customize in Aroma
6. Reboot and Enjoy!
7. PLEASE allow rom to settle for 10-15 minutes then restart before doing anything.
To Install if coming from 1.5x(Dirty Flash is possible):
Make a backup
Install using custom recovery
Select which apps you may want removed in Aroma
Select CDMA or GSM configuration
Rom will format the System partition and install updated version but you will not lose any account data or apps you have installed
IORoot can be found here Here
AutoRec can be found here Here
Thank you to @autoprime for IORoot
Thank you to @Cloudyfa for AutoRec
Thank you to @Amarullz for Aroma Installer
If you like my work please considering hitting the Thanks button! or maybe donating some RedBull.
XDA:DevDB Information
2Faced, ROM for the Sprint LG G2
Contributors
Artifesto
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ZVC Radio
Based On: Stock
Version Information
Status: Stable
Current Stable Version: 1.6/1.7.1x
Stable Release Date: 2014-06-21
Created 2014-06-07
Last Updated 2014-07-06
Reserved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved
*2Faced - 1.0
Initial release
*2Faced 1.1-1.4
Private testing and fixes
Added LG apps back to Rom
*2Faced - 1.5x
Updated to LG G3 Port
Experimental Build
SuperUser added completely(no need to flash SuperSU.zip to achieve root)
*2Faced - 1.6 GSM
Fixed Camera Video Recording Issue
Fixed YouTube not playing videos
Fixed GPS lock issue while navigating
Added Common APN Settings
Build.prop edit to allow easier restore with Flash Tools
Enabled USB PC Connection Pop-up
Installed this rom and its superb... Installation was smooth... Phone running perfectly fine with Indian GSM carrier... No issues yet...
Sent from my LG-D801 using XDA Free mobile app
That's great to know, thanks! I'm happy to hear it works internationally as well
Sent from my LG-LS980 using XDA Free mobile app
ammu2016 said:
Installed this rom and its superb... Installation was smooth... Phone running perfectly fine with Indian GSM carrier... No issues yet...
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
Does it work with RUIMs ? Can you please test with any CDMA provider like Reliance , TATA , BSNL or MTS . I am interested in RUIM functionality in SIM slot and not interested in NV mode .
I need quick memo... It's not working... Any solution?
Sent from my LG-D801 using XDA Free mobile app
kuduku said:
Hi
Does it work with RUIMs ? Can you please test with any CDMA provider like Reliance , TATA , BSNL or MTS . I am interested in RUIM functionality in SIM slot and not interested in NV mode .
Click to expand...
Click to collapse
I don't have any way of testing with any of those providers but I am working on getting it to work with US CDMA Carriers, I'll do some research into your question and see if it can be put into the ROM. So far I havn't seen much outside of device limitation that cannot be achieved with Android and Custom Roms
ammu2016 said:
I need quick memo... It's not working... Any solution?
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
I will most likely include a "fatter/bloated" version in my update, I do miss having Quick Memo as well as a few other niceties from a completely stock ROM. But as for now I haven't seen any flashable zip or .apk file to install for individual LG Apps. Depending on work over the next few days I should have an updated version with all of the stock LG Apps. I'm looking into using Aroma and allowing users to pick what they want on install.
kuduku said:
Hi
Does it work with RUIMs ? Can you please test with any CDMA provider like Reliance , TATA , BSNL or MTS . I am interested in RUIM functionality in SIM slot and not interested in NV mode .
Click to expand...
Click to collapse
Removable user identity module/subscriber identy module. Basically a new method to allow a CDMA (code division multiple access) phone use a gsm network. Our phone service is still CDMA, but 4g-lte is a GSM (global system for mobile) style network. So this format combines the two.
Click to expand...
Click to collapse
The RUIM card was designed to replicate many of the advantages of the Subscriber Identity Module (SIM) card on the GSM network. Phones on the CDMA network that do not use RUIM cards store all of the user's information in the phone itself; if the user wants to change phones, he or she has to go to the cell phone service provider, who will transfer the information to the new handset. GSM network phones use SIM cards, which store all of the user's information, so activating a new phone is often as simple as moving the card from one handset to another.
CDMA phones that use RUIM cards share this ability to swap information between phones. The card is the same size and shape as a regular SIM card, and typically includes a version of the SIM software, which means that it can be used in GSM phones. As with switching cards between CDMA phones, however, the GSM handset must be unlocked for a RUIM card to work with it. An RUIM card in a GSM phone might not work in all locations, because different regions use different cell phone frequencies.
Click to expand...
Click to collapse
From what I've read, it really sounds like if you have a ROM which allows both CDMA and GSM communications you're really limited on the frequencies that the phone can use, the LG G2 uses these GSM 850/900/1800/1900 MHz, UMTS 2100* LTE CAT 3, HSPA+ 21 Mbps* EDGE, GPRS Class 10, UMTS, HSPA+, WCDMA, LTE Bands 25/26/41*. All listed frequency support is network/carrier specific. Roaming capability and network frequency support may not be available. If the carrier you wish to use the device with supports any of these then it should work to some extent, at least that's how it appears to me.
Artifesto said:
From what I've read, it really sounds like if you have a ROM which allows both CDMA and GSM communications you're really limited on the frequencies that the phone can use, the LG G2 uses these GSM 850/900/1800/1900 MHz, UMTS 2100* LTE CAT 3, HSPA+ 21 Mbps* EDGE, GPRS Class 10, UMTS, HSPA+, WCDMA, LTE Bands 25/26/41*. All listed frequency support is network/carrier specific. Roaming capability and network frequency support may not be available. If the carrier you wish to use the device with supports any of these then it should work to some extent, at least that's how it appears to me.
Click to expand...
Click to collapse
I have Sprint LS980 only . On ZV7 and ZV8 both RUIM/GSM SIM card work once you change the NV only mode in device . I asked as this functionality was disabled by Sprint in ZVC . The device already has the capability and I dont want to lose it by upgrading to Kitkat . The frequencies in GSM might not work in US in HSPA+ but works fine in other countries which have the Sprint LS980 frequencies for HSPA+ and LTE .
So when the user had commented that he had used it in GSM in India , thats why i requested him to put any RUIM and confirm whether RUIM functionality is disabled or not .
kuduku said:
I have Sprint LS980 only . On ZV7 and ZV8 both RUIM/GSM SIM card work once you change the NV only mode in device . I asked as this functionality was disabled by Sprint in ZVC . The device already has the capability and I dont want to lose it by upgrading to Kitkat . The frequencies in GSM might not work in US in HSPA+ but works fine in other countries which have the Sprint LS980 frequencies for HSPA+ and LTE .
So when the user had commented that he had used it in GSM in India , thats why i requested him to put any RUIM and confirm whether RUIM functionality is disabled or not .
Click to expand...
Click to collapse
This is not a Sprint based ROM, it is T-Mobile GSM based, which is why it allows for GSM carriers to communicate with the device and it not be locked to Sprint CDMA.
Artifesto said:
This is not a Sprint based ROM, it is T-Mobile GSM based, which is why it allows for GSM carriers to communicate with the device and it not be locked to Sprint CDMA.
Click to expand...
Click to collapse
Sorry my mistake , didnt check the thread properly .
Thanks for all the help but my query to @ammu2016 still stands .
Supersu Zip
Does Anyone Have The Supersu Zip ??... I Have Searched And Cant Seem To Find Out. Any Help Would Appreciated.
Thanks In Advance.....
Edit: GOt It... Thanks Everything Is Working Great On Metro Except Data... Any Reason Why??... Any Help Would Appreciated
Thanks.....
dame_diddy22 said:
Does Anyone Have The Supersu Zip ??... I Have Searched And Cant Seem To Find Out. Any Help Would Appreciated.
Thanks In Advance.....
Edit: GOt It... Thanks Everything Is Working Great On Metro Except Data... Any Reason Why??... Any Help Would Appreciated
Thanks.....
Click to expand...
Click to collapse
Maybe try these APN Settings
Name: metropcs
APN: internet
proxy: wap.metropcs.net:3128
port: 3128
username: [email protected]
password: metropcs
server: wap.metropcs.net
mmsc: http://mms.metropcs.net:3128/mmsc
mms proxy: wap.metropcs.net
mms port: 3128
mmc: 310
mnc: 004
auth type: none
apn type: not set
User and Password:
your10-digit#@mymetropcs.com
White lines through screen.
After the phone goes to sleep and is woken up I get white and black lines through the screen. I have to hold the power button down to shut it off then restart the phone. But it seems to do it every time. Has anyone had a similar issue?
crasher381 said:
After the phone goes to sleep and is woken up I get white and black lines through the screen. I have to hold the power button down to shut it off then restart the phone. But it seems to do it every time. Has anyone had a similar issue?
Click to expand...
Click to collapse
Yes, that means you need the modified kernel for your device. Most likely your device has the JDI panel and the kernel is built for the LGD panel.
Have you checked out this nifty tool which should patch your kernel and fix the white lines issue?
http://forum.xda-developers.com/showthread.php?p=52892375
daCLOUD said:
Yes, that means you need the modified kernel for your device. Most likely your device has the JDI panel and the kernel is built for the LGD panel.
Have you checked out this nifty tool which should patch your kernel and fix the white lines issue?
http://forum.xda-developers.com/showthread.php?p=52892375
Click to expand...
Click to collapse
Shortly after posting I can across the jdi kernel and flashed it and all is working now. Thank you very much for the response and help.
I flashed the ROM but it won't boot ahead of LG Logo.
Seems it was a bad flash or bad download...
But, now I can't:
1. Flash TOT file of LS980 as it says incorrect model no
2. Can't boot to recovery thru key combinations.. Its really hit n miss n last time i could boot into recovery thru this combination on some other device was after 10-15 tries.
I can keep trying to boot to recovery n then restore my backup..
Before that, any other solution?
Edit... Was able to boot to recovery n then restore my ZVA backup..
What I actually did was, Flashed the rom on ZVA + flashed ZVC modem.
Was this the reason of not booting the rom? if so, do i need to be on ZVC only ??? No other way to go from ZV7/8/A?
hiteshkkk said:
I flashed the ROM but it won't boot ahead of LG Logo.
Seems it was a bad flash or bad download...
But, now I can't:
1. Flash TOT file of LS980 as it says incorrect model no
2. Can't boot to recovery thru key combinations.. Its really hit n miss n last time i could boot into recovery thru this combination on some other device was after 10-15 tries.
I can keep trying to boot to recovery n then restore my backup..
Before that, any other solution?
Edit... Was able to boot to recovery n then restore my ZVA backup..
What I actually did was, Flashed the rom on ZVA + flashed ZVC modem.
Was this the reason of not booting the rom? if so, do i need to be on ZVC only ??? No other way to go from ZV7/8/A?
Click to expand...
Click to collapse
yes it needs the ZVC Modem/Radio, there is a DLL file that will allow Flash Tools to ignore SW Version and flash it to an LG default. You can then reboot into download and flash anything else with the regular Sprint DLL if you ever get stuck again. I've used it many times, here it is.
Artifesto said:
yes it needs the ZVC Modem/Radio, there is a DLL file that will allow Flash Tools to ignore SW Version and flash it to an LG default. You can then reboot into download and flash anything else with the regular Sprint DLL if you ever get stuck again. I've used it many times, here it is.
Click to expand...
Click to collapse
Got it.. I am already downloading ZVC tot...
But, out of curiosity, I did flash ZVC radio along with your rom, still why didn't it allow?
Thanks for the DLL thing...
I recently purchased in Hong Kong a LG G3 of whom I am very satisfied.
I have already rooted it.
I have 3 questions:
1. how can I check which model do I own? (D850? D851? D855?)
2. I have rooted it, but what will happen when I do the next official OTA upgrade? Will I lose the rooting?
3. MISSING feature: the only feature I miss (from my previous device) is the possibility to record a phone call. Is there a possibility, via a kernel or a specific apk, to restore this capability? Or do I need to flash a custom ROM (I wish not) ?
Thank you
Saulo
I have one more question:
I am currently in China. I am sure that China Unicom is currently using TD LTE (borrowing the network from China Mobile), since the deployment of their own FD LTE will start, at least in my area, in January 2015. How can then my LG G3 show the 4G icon in the top bar?
Does LG G3 have TD LTE embedded in the Ericsson LTE modem?
By contrast, my Samsung Note 4 SM-910C (which has several FD LTE bands but NOT TD LTE) is showing H+ (WCDMA) in the top bar, under the same condition, same SIM card, etc.
Thanks
Saulo
Hi all
Who can help this man?
I also want to know how to check the proper model number (D850....)
Maybe.... Settings --> Phone Information --> Hardware Information --> First entry??
If you rooted your phone and you install an OTA Update, the root is gone. That was my experience. But I saw some tutorials where other people still have root access. Nevermind... you can root with easily after your OTA Update.
Greez
saulo866 said:
I have one more question:
I am currently in China. I am sure that China Unicom is currently using TD LTE (borrowing the network from China Mobile), since the deployment of their own FD LTE will start, at least in my area, in January 2015. How can then my LG G3 show the 4G icon in the top bar?
Does LG G3 have TD LTE embedded in the Ericsson LTE modem?
By contrast, my Samsung Note 4 SM-910C (which has several FD LTE bands but NOT TD LTE) is showing H+ (WCDMA) in the top bar, under the same condition, same SIM card, etc.
Thanks
Saulo
Click to expand...
Click to collapse
1- By adding your IMEI to the end of this link in your browser you can check your model: csmg.lgmobile(dot)com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
2- AFAIK, for the OTA updates it's more convenient to flash a stock rom to unroot and then rooting again after OTA update
3- There may be some apps allowing this feature, however I don't use any
ACR works for call record in
IF you don't want to upgrade to 5.0 yet and prefer staying on 4.4, install xposed and G3 tweaksbox, it unlocks the built-in ability to record (and auto record) all calls.
Hi molius. Do you mean that with 5.0 we do have by default the phone call recording feature? And. By the way, do you know when version 5.0 can be installed? Will it be OTA ?
saulo866 said:
Hi molius. Do you mean that with 5.0 we do have by default the phone call recording feature? And. By the way, do you know when version 5.0 can be installed? Will it be OTA ?
Click to expand...
Click to collapse
It's recommended not to update OTA if you are rooted, and want to stay rooted as it may cause instability. More information on that and how to update safely here http://forum.xda-developers.com/lg-g3/development/psa-stop-taking-ota-updates-update-t2909412