-Dial: ##634#
-Press the "call" button
-On the MFG screen input this password: 277634#*# and press enter. Now the MFG icon is listed on the "programs list".
-Now you can access to many options, tests.....
i.e.
-You can enable Tethering: download modem drivers here: (ops..I cannot put the link...try to find "PilotesLGe900.exe" driver by your own.... )
- Switch off data connections.
-Enter "Engineer menu"-->"Port settings"-->"USB Switching"-->"QC composite"
-Reboot
-Link smartphone to pc via USB cable.
-Autoinstalling of drivers.
-Into your pc select "modem settings"
-Add: + CGDCONT = 1, “IP”, “orange” (or other for your operator).
-Create "new modem connection" with this number: *99#
-On the smartphone, under "USB Switching" select "MS.." again.
-Enable data connection
i have tried this on my optimus and the password does not work
my phone came from vodafone and is on there network
edited the site i read the password from had a . after the last hash confirmed working on voda fone optimus thanks
No network Service
I'm using Lg optimus 7 for the past 6 months...Had no problem but suddenly before a week i could find no network in my phone but the SIM card works perfectly in al d other fones...Is my mobile is sim locked? when i go to settings>>about>>under the phone information the CARRIER is OPEN!
NOTE
1. I'm able to retrive the contacts from the sim(i.e the sim slot is working)
2. I'm experiencing this problem only when I tried to unlock my device in order to use XAP apps(DFT BT file transfer), I hava a doubt if Microsoft has blocked me or something...
3. I tried factory reset too but still the problem exists..!
Pls somebody help me out to resolve.....THNX
Ganesh Kannan said:
I'm using Lg optimus 7 for the past 6 months...Had no problem but suddenly before a week i could find no network in my phone but the SIM card works perfectly in al d other fones...Is my mobile is sim locked? when i go to settings>>about>>under the phone information the CARRIER is OPEN!
NOTE
1. I'm able to retrive the contacts from the sim(i.e the sim slot is working)
2. I'm experiencing this problem only when I tried to unlock my device in order to use XAP apps(DFT BT file transfer), I hava a doubt if Microsoft has blocked me or something...
3. I tried factory reset too but still the problem exists..!
Pls somebody help me out to resolve.....THNX
Click to expand...
Click to collapse
pls
ihave big trouble
my lg e900h imade update to wp7.5 and that download too late i make stop and resume after finished update i found tha my phone never her any one ecxept head phone or speaker fone only after that i make downgrade to wp7 and make another update to v 7.10.7720.68 aim found after that update the same trouble in my lg pls told me is that bad microphone hardware or bad software
:
[email protected]
khaled
Any ideas how to get rid of this pop up..every time i turn on my data i get dis popup which waits till i press ok to connect ...i tried SQlite editor..in settings i found some data popup notification i changed d value from 0 to 1 but still no luck...
Thanks
Sent from my LG-F240S
By the way i have the F240 S...rooted..
When I work in the 3G settings in incredible 2 by cod =778 then Enter the check securty and work settings and save(cummet) them Waite restart the machine and all ok
But when I put the SIM CDMA then enter securty i find that Place ppp user and also ppp pasword has become Empty i was re-written(save cummet) and then restart the phone, but when enter again this place may Also empty
i also use dfs cdma for this but sam problem
What is the solution to work save after inter sim cdma
help me plz
any person help me
fawzisaeed said:
When I work in the 3G settings in incredible 2 by cod =778 then Enter the check securty and work settings and save(cummet) them Waite restart the machine and all ok
But when I put the SIM CDMA then enter securty i find that Place ppp user and also ppp pasword has become Empty i was re-written(save cummet) and then restart the phone, but when enter again this place may Also empty
i also use dfs cdma for this but sam problem
What is the solution to work save after inter sim cdma
help me plz
Click to expand...
Click to collapse
First off... you shouldnt use bigger fonts.. stock fonts are great.
Second... What?
Third More info is needed about the phone in order to even start to help. i.e. Rooted or not. what rom you are running if rooted. try adding it to your signature might actually work out easier for you if it is your permanent phone
Forth please dont use bigger fonts ever. it will only make people not look at your post and ignore it
Sorry
ihave inceidble 2 use stock rom no root anderoid 2.3
dont keep edite in epst when bot sim cdma
plz help me
When i put on the chip, the IMEI set to NULL
I've already tried many ways to fix this, but no success...
Please, someone help me!
I don't want to lost my optimus G!
thanks
You should restore your imei with your EFS backup...have you unlock with freegee or you are completely stock and have never touched nothing?
Sent from my LG-F180K using XDA Free mobile app
Sorin90 said:
You should restore your imei with your EFS backup...have you unlock with freegee or you are completely stock and have never touched nothing?
Sent from my LG-F180K using XDA Free mobile app
Click to expand...
Click to collapse
first of all thanks by your attention!
I do not have a backup...
i don't know what to do...
i've unlocked with freegee many times...
but this time i got this problem!
renanreno said:
first of all thanks by your attention!
I do not have a backup...
i don't know what to do...
i've unlocked with freegee many times...
but this time i got this problem!
Click to expand...
Click to collapse
Retrieve IMEI in your LG Optimus G in case of not make previous backup
The method I describe below was developed for LG G2 but has been tested successfully in the Optimus G so it's perfectly useful:
Requirements:
- The mobile must have the Stock ROM (4.1.2 or 4.4.2).
- Download Tool QSTP:
https://mega.co.nz/#!2phwmYhY!DXozTvsU4pDD5PKJcYWnuC5nKQEA0skuFeN-90dFjQU
- Download Tool IMEI Converter:
https://dl.dropboxusercontent.com/u/84115590/IMEI-Converter.zip
Steps:
1 Unzip the tool IMEI Converter to a folder:
2 Unzip tool QPST 2.7_build_4.11 in a folder and run the installation file (Setup) to install on your computer:
3 Now on the phone to enable USB Debugging. If you do not know how you can find this option in the Settings> Developmet Options>USB debugging and activate.
5 Connect the device to your computer.
6 Run the QSPT, to set it up you are clicking on the PORTS tab, then click on the ADD NEW PORT option.
7 The current port as should COM4 or 5. Note: If you do not recognize these ports any port try to recognize the phone or another PC in the latter case.
8 Select the port and click OK. The port should show the active phone.
9 Select the phone (APQ8064) and click the Download Software option from the Start Clients menu.
10 Now give click the Backup tab. It should show the phone port.
11 Click the Start tab to start doing the backup.
12 Now find the folder named BIN located in the path:
C:/program files/Qualcomm/QSPT/, open the BIN folder and execute the file RF_NV_Manager
13 Click in File> Read from phone. The IMEI number of the phone should appear in item number 550: NV_UV_IMEI_1
If you appear get an error
14 They select OK and then click on File> Read RF NVitems supported.
15. Click on item 550. Should be displayed 9 boxes in white (empty).
16 Now run the file IMEIConverter.exe
17 Then write your IMEI (15 digits) in the Enter IMEI field. If you do not know what they find in the phone box, in some models even Optimus G is glued on the back thereof, or in the phone bill.
*** - Then click on the button <CONVERT IMEI>.
** - 18 Should appear two groups of 9 digits
18. In the program RF_NV_Manager activated the Hex box
19 Now 9 boxes appear, type the numbers generated IMEI Convert starting from the left, should be written in each box two digits consecutively until the 9 squares remain full.
20 Once the 9 squares are filled correctly you have to go to Setting option> comport> and select the port to which you are connected again and give OK
21 Select the Write NV tab.
22 Then click File> Readfrom phone.
The item number 550 should now appear.
24 Disconnect the USB cable and restart the phone.
25 Open the dialer (phone dialer) dial *#06# You should display the IMEI of your phone and the phone should be connected to the carrier signal without problems.
Important Note:
- If you give Error in step 13 run again and Method in step 13 before you dial them run error step 20.
Good luck and any thing sending me a message and i help. :good:
whit efs profesional is more easy
syverman said:
whit efs profesional is more easy
Click to expand...
Click to collapse
I do not know the method you mentioned, but in any case I have already given an effective alternative for him to solve your problem, since no one has helped so far.
Milos Rea said:
Retrieve IMEI in your LG Optimus G in case of not make previous backup
The method I describe below was developed for LG G2 but has been tested successfully in the Optimus G so it's perfectly useful:
Requirements:
- The mobile must have the Stock ROM (4.1.2 or 4.4.2).
- Download Tool QSTP from this Post:
http://forum.xda-developers.com/showthread.php?t=1942417
- Download Tool IMEI Converter from this Post (item 2):
*http://forum.xda-developers.com/showthread.php?t=2701861
Steps:
1 Unzip the tool IMEI Converter to a folder:
2 Unzip tool QPST 2.7_378 in a folder and run the installation file (Setup) to install on your computer:
3 Now on the phone to enable USB Debugging. If you do not know how you can find this option in the Settings> Developmet Options>USB debugging and activate.
5 Connect the device to your computer.
6 Run the QSPT, to set it up you are clicking on the PORTS tab, then click on the ADD NEW PORT option.
7 The current port as should COM4 or 5. Note: If you do not recognize these ports any port try to recognize the phone or another PC in the latter case.
8 Select the port and click OK. The port should show the active phone.
9 Select the phone (APQ8064) and click the Download Software option from the Start Clients menu.
10 Now give click the Backup tab. It should show the phone port.
11 Click the Start tab to start doing the backup.
12 Now find the folder named BIN located in the path:
C:/program files/Qualcomm/QSPT/, open the BIN folder and execute the file RF_NV_Manager
13 Click in File> Read from phone. The IMEI number of the phone should appear in item number 550: NV_UV_IMEI_1
If you appear get an error
14 They select OK and then click on File> Read RF NVitems supported.
15. Click on item 550. Should be displayed 9 boxes in white (empty).
16 Now run the file IMEIConverter.exe
17 Then write your IMEI (15 digits) in the Enter IMEI field. If you do not know what they find in the phone box, in some models even Optimus G is glued on the back thereof, or in the phone bill.
*** - Then click on the button <CONVERT IMEI>.
** - 18 Should appear two groups of 9 digits
18. In the program RF_NV_Manager activated the Hex box
19 Now 9 boxes appear, type the numbers generated IMEI Convert starting from the left, should be written in each box two digits consecutively until the 9 squares remain full.
20 Once the 9 squares are filled correctly you have to go to Setting option> comport> and select the port to which you are connected again and give OK
21 Select the Write NV tab.
22 Then click File> Readfrom phone.
The item number 550 should now appear.
24 Disconnect the USB cable and restart the phone.
25 Open the dialer (phone dialer) dial * # 06 # You should display the IMEI of your phone and the phone should be connected to the carrier signal without problems.
Important Note:
- If you give Error in step 13 run again and Method in step 13 before you dial them run error step 20.
Good luck and any thing sending me a message and i help. :good:
Click to expand...
Click to collapse
I did everything but it is not with original imei of my carrier, is with another imei. Because?
Milos Rea said:
Retrieve IMEI in your LG Optimus G in case of not make previous backup
The method I describe below was developed for LG G2 but has been tested successfully in the Optimus G so it's perfectly useful:
Requirements:
- The mobile must have the Stock ROM (4.1.2 or 4.4.2).
- Download Tool QSTP from this Post:
http://forum.xda-developers.com/showthread.php?t=1942417
- Download Tool IMEI Converter from this Post (item 2):
*http://forum.xda-developers.com/showthread.php?t=2701861
Steps:
1 Unzip the tool IMEI Converter to a folder:
2 Unzip tool QPST 2.7_378 in a folder and run the installation file (Setup) to install on your computer:
3 Now on the phone to enable USB Debugging. If you do not know how you can find this option in the Settings> Developmet Options>USB debugging and activate.
5 Connect the device to your computer.
6 Run the QSPT, to set it up you are clicking on the PORTS tab, then click on the ADD NEW PORT option.
7 The current port as should COM4 or 5. Note: If you do not recognize these ports any port try to recognize the phone or another PC in the latter case.
8 Select the port and click OK. The port should show the active phone.
9 Select the phone (APQ8064) and click the Download Software option from the Start Clients menu.
10 Now give click the Backup tab. It should show the phone port.
11 Click the Start tab to start doing the backup.
12 Now find the folder named BIN located in the path:
C:/program files/Qualcomm/QSPT/, open the BIN folder and execute the file RF_NV_Manager
13 Click in File> Read from phone. The IMEI number of the phone should appear in item number 550: NV_UV_IMEI_1
If you appear get an error
14 They select OK and then click on File> Read RF NVitems supported.
15. Click on item 550. Should be displayed 9 boxes in white (empty).
16 Now run the file IMEIConverter.exe
17 Then write your IMEI (15 digits) in the Enter IMEI field. If you do not know what they find in the phone box, in some models even Optimus G is glued on the back thereof, or in the phone bill.
*** - Then click on the button <CONVERT IMEI>.
** - 18 Should appear two groups of 9 digits
18. In the program RF_NV_Manager activated the Hex box
19 Now 9 boxes appear, type the numbers generated IMEI Convert starting from the left, should be written in each box two digits consecutively until the 9 squares remain full.
20 Once the 9 squares are filled correctly you have to go to Setting option> comport> and select the port to which you are connected again and give OK
21 Select the Write NV tab.
22 Then click File> Readfrom phone.
The item number 550 should now appear.
24 Disconnect the USB cable and restart the phone.
25 Open the dialer (phone dialer) dial * # 06 # You should display the IMEI of your phone and the phone should be connected to the carrier signal without problems.
Important Note:
- If you give Error in step 13 run again and Method in step 13 before you dial them run error step 20.
Good luck and any thing sending me a message and i help. :good:
Click to expand...
Click to collapse
Dear Sir, I am using this process for restoring efs/Imei of my LG optimus G f180l. the port shows in my system COM5 and when i swich my phone in LG software mode . but in step 13 it gives the error(could not communicate in diagnostic mode) during backing up. please guide me what I have to do and what mistake m I doing. PLease
gm sheikh said:
Dear Sir, I am using this process for restoring efs/Imei of my LG optimus G f180l. the port shows in my system COM5 and when i swich my phone in LG software mode . but in step 13 it gives the error(could not communicate in diagnostic mode) during backing up. please guide me what I have to do and what mistake m I doing. PLease
Click to expand...
Click to collapse
put it in charge only, that help for me when i use it a long time ago
gm sheikh said:
Dear Sir, I am using this process for restoring efs/Imei of my LG optimus G f180l. the port shows in my system COM5 and when i swich my phone in LG software mode . but in step 13 it gives the error(could not communicate in diagnostic mode) during backing up. please guide me what I have to do and what mistake m I doing. PLease
Click to expand...
Click to collapse
Hi, if you get the error in step 13 test select Setting option> comport> and select the port to which you are connected again and give OK. Good luck
Hey guys, I will reactivate this topic a little. I ve got LG F180K and I converted it to E975 without doing EFS backup (still had imei number but no signal). I flashed modem for K and it still didnt work, flashed L modem and it...worked. No LTE and no 2G, only 3G, still imei.
What to do then if I want come back to F180K ROM? (NO EFS BACKUP)
If you unlocked using freegee the imei backup folder is their in your internal storage root folder. freegee backups even if you don't choose to.
akahroba said:
If you unlocked using freegee the imei backup folder is their in your internal storage root folder. freegee backups even if you don't choose to.
Click to expand...
Click to collapse
I didnt do freegee
BartxGamer said:
Hey guys, I will reactivate this topic a little. I ve got LG F180K and I converted it to E975 without doing EFS backup (still had imei number but no signal). I flashed modem for K and it still didnt work, flashed L modem and it...worked. No LTE and no 2G, only 3G, still imei.
What to do then if I want come back to F180K ROM? (NO EFS BACKUP)
Click to expand...
Click to collapse
Do this step for no signal if your IMEI is correct(not null).Root is necessary for this step
Install "SQLite editer" from Google play to open "settings.db" in location "Data\data\com.android.providers.settings\database s" select "global" -> find "subscription_mode" change value "1" to "0" then save and exit.
kashifarif said:
Do this step for no signal if your IMEI is correct(not null).Root is necessary for this step
Install "SQLite editer" from Google play to open "settings.db" in location "Data\data\com.android.providers.settings\database s" select "global" -> find "subscription_mode" change value "1" to "0" then save and exit.
Click to expand...
Click to collapse
Are you sure about that?
renanreno said:
When i put on the chip, the IMEI set to NULL
I've already tried many ways to fix this, but no success...
Please, someone help me!
I don't want to lost my optimus G!
thanks
Click to expand...
Click to collapse
i have same problem due to convert f180k to e975. i have solved it by factory rest after flash and after factory reset (setting->backup and reset-> reset phone) restore IMEI and then again factory reset.
Factory reset after flash is main solution.
Sorry for necroing an old thread, but my lg g6 t- mobile h872 , suddenly says IMEI null after the latest 20a-e update. I never rooted, or flashed any custom roms before
What should I do?
I'm new to posting so please forgive me if I am wrong in anyway.. I just bypassed the lg g4 google account id setup.. I can get in and had do a few things . once I am in is there a way to delete files that are device protection device.. If so please let me know.. I would like to help you guys out and vice versa
This is how I did a bypass..
Your on the main screen lg go to accessibility go to switch access go to settings mark key combo overview
Then you have to get close to a xfinity internet access .. Once it connects it should prombt to internet explorer by itself .. Then you click the combo overview button you pushed .. Then go to dual window select file manager .. Then you have access to files.. If you have apps on a SD you can open them up.. I used tsf shell launcher .. Then this tricky part you have a few seconds to get to settings.. Once in setting you add account and then boom you can use the phone as if it was the second account.. I can call text .. Internet only on WiFi ...
Please let me know if it works for you guys ...
how did you bypass
tinobeano84 said:
I'm new to posting so please forgive me if I am wrong in anyway.. I just bypassed the lg g4 google account id setup.. I can get in and had do a few things . once I am in is there a way to delete files that are device protection device.. If so please let me know.. I would like to help you guys out and vice versa
Click to expand...
Click to collapse
can yo share how did you do it please
This is how I did a bypass..
Your on the main screen lg go to accessibility go to switch access go to settings mark key combo overview
Then you have to get close to a xfinity internet access .. Once it connects it should prombt to internet explorer by itself .. Then you click the combo overview button you pushed .. Then go to dual window select file manager .. Then you have access to files.. If you have apps on a SD you can open them up.. I used tsf shell launcher .. Then this tricky part you have a few seconds to get to settings.. Once in setting you add account and then boom you can use the phone as if it was the second account.. I can call text .. Internet only on WiF
ok ive got access to everything....when thru backdoor of accessibility like u said.....problem now is in dev setting i can't get oem unlock to show up..does anybody have any ideas?
p.s. i didnt steal the device...i can give you proof of purchase if you want...
hello
for those who can't access dual windows , try to make emergency call then press key combo