Android Pay - Stock OOS with Systemless SU, EX 0.25, Magisk - OnePlus 3 Questions & Answers

I can't get it to pass the Safety Net test. I've tried all I can think of. Magical has SU hide enabled, Auto magisk is installed, EX has the kernel patch to supposedly get around SN....
Picture of my safetynet helper running attached. I don't know what this issue is... Any idea?

After ROM flash:
SuperSU 2.78 SR1
Suhide
Magisk v8 (I install Magisk because I use systemless Xposed by topjohnwu)
EX Kernel
Rootswitch APK to switch off root
Once you switch off root. SafetyNet will pass.

Related

Magisk in Oneplus 3 with CM14.1?

Actually i want to play Pokemon go on CM. So i'm trying Magisk.
I followed the instruction here and tried with both [Magisk] phh's SuperUser and SuperSU (systemless)
http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
But both did not work.
Anybody tried Magisk in OP3 with CM14.1?
Is it possible for magisk to work on CM?
svprm said:
Actually i want to play Pokemon go on CM. So i'm trying Magisk.
I followed the instruction here and tried with both [Magisk] phh's SuperUser and SuperSU (systemless)
http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
But both did not work.
Anybody tried Magisk in OP3 with CM14.1?
Is it possible for magisk to work on CM?
Click to expand...
Click to collapse
I was running Magisk V9 with phh Super SU on CM14.1 (late November official nightly) and it was passing safetynet so I know that works, but I never actually tried launching PoGo.
Hw4ng3r said:
I was running Magisk V9 with phh Super SU on CM14.1 (late November official nightly) and it was passing safetynet so I know that works, but I never actually tried launching PoGo.
Click to expand...
Click to collapse
Can you tell me the steps to install?
I think i'm missing something.
svprm said:
Can you tell me the steps to install?
I think i'm missing something.
Click to expand...
Click to collapse
CM14.1 has system root built-in. You have to remove it before you install Magisk and Phh SU. You need unSU http://forum.xda-developers.com/showpost.php?p=63615067.
After you flash the ROM, flash unSU zip. Reboot to recovery again. Flash Magisk and flash Phh SU.
Tikerz said:
CM14.1 has system root built-in. You have to remove it before you install Magisk and Phh SU. You need unSU http://forum.xda-developers.com/showpost.php?p=63615067.
After you flash the ROM, flash unSU zip. Reboot to recovery again. Flash Magisk and flash Phh SU.
Click to expand...
Click to collapse
+1 to @Tikerz response
Tikerz said:
CM14.1 has system root built-in. You have to remove it before you install Magisk and Phh SU. You need unSU http://forum.xda-developers.com/showpost.php?p=63615067.
After you flash the ROM, flash unSU zip. Reboot to recovery again. Flash Magisk and flash Phh SU.
Click to expand...
Click to collapse
Followed the same.
But safetynet check failed. I used https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample&hl=en.
svprm said:
Followed the same.
But safetynet check failed. I used https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample&hl=en.
Click to expand...
Click to collapse
There's a few settings you have to enable in Magisk Manager (can't Remeber what they were off the top of my head) and reboot your phone.
You also have to download Phh SU from play store before you can gain access to Magisk Manager
Thanks it worked.
Created a Guide:
http://forum.xda-developers.com/oneplus-3/how-to/guide-play-pokemon-cm-14-1-rom-t3521593

How do you install Magisk on Oneplus 3 OOS 4.1.3

I tried to install magisk v12 zip but it always fails but says to install supersu soon after. I did that but when i installed magisk manager it said there's no MagiskSU installed and Safety net did not pass as well! Then i tried to uninstall supersu and magisk and flash magisk v12 again but same result again. I tried find how to install MagiskSU online but i can't find any thread about this issue. My aim of installing Magisk is to use MagiskHide for snapchat. Can someone help me pls.:crying:
Are you on SuperSU at the moment?
You will need to unroot using the SuperSU app (That's what I did) before flashing magisk zip.
Secondly, I had trouble with SuperSU + Magisk so I used phh superuser to get it working. I also needed magisk to hide root from snapchat and another banking app and I am able to do so easily.
So, in short,
1. Uninstall SuperSU
2. Flash magisk zip in recovery
3. Flash phh superuser in recovery (People say its optional but I do it anyway)
4. Reboot and benefit
Can you send me a link to download the phh superuser file you used please. When you say uninstall do you mean full unroot? What did you use to uninstall supersu? https://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459
Magisk v12 will auto install root when no root is detected, so u can just clean flash ur rom and install magisk v12 after it, it will auto root
@mharis05 nowadays Phh's Superuser is not "optional": it's unsupported and replaced by the integrated MagiskSU since Magisk v10: look at the official thread, it's declared obsolete.
It would get device in trouble, even if MagiskSU is disabled.
 @Bradl79 neither the clean flash is a right way, because:
1) If you're intending a system wipe, it's not resolutive because Magisk is OTA-survival.
2) If you're intending a data wipe, it's an useless waste of time... and data!
You have to run the following zip files: Magisk official uninstaller and UnSU to be sure you've not rooted device in any way.
Then to stay quiet, do a Cache and Dalvik/ART wipe.
At this point, try to reflash Magisk.
I tried that but time and time again when i try to uninstall that SUPERSU it says to flash default boot.img to complete the process. AND Installation "FAILED" Flash Supersu immediately. I did that but still no magiskSU.
At this point try to wipe system and cache/ART, then reflash OOS.
After doing that, go with Magisk.

Hide root from Snapchat and Pokemon Go

I have looked and tried everything to hide my root, unsuccessfully. My HTC M8 is rooted. TWRP, SuperSU. I can't login to snapchat. I did not have xposed or magisk installed. Only SuperSU. After that I installed xposed and rootcloak, doesn't work. I tried Hide my root from Google play, it says "cannot find su binary". Now I have xposed, magisk and I have no idea what to do. I'm very confused. Please help
1. Flash Magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
2. Open Magisk app
3. Go to setting - Hide Magisk
mefistoreyon said:
1. Flash Magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
2. Open Magisk app
3. Go to setting - Hide Magisk
Click to expand...
Click to collapse
Doesn't work I tried that twice
I ended up uninstalling xposed, unrooting and rooting again with phh superuser (previously rooted with chainfire supersu). Then the hide option in magisk worked perfectly. I can now use snapchat, pokemon go and bank apps.

[How-to] Viper4Android on Pixel XL running Android 8.1

Magisk has a Viper4Android Module you can download and install and reboot which you are going to use.
I have this working on my Pixel XL running 8.1:
-Installed ElementalX v3.0
-Installed Magisk v14.5
-Installed BusyBox Module found in Magisk
-Installed Viper4Android FX v2.5 (Created by ahrion ,zackptg5) This module give you option of new or old Viper.
-Installed The Magisk permissive script (Found Below)
-Restart
When you have completed the above steps, open Viper4Android and check the Driver Status. It should look like the screen below
Thanks to @TWisTeD48 for the simple instruction over at the thread [12/13/17] ViPER4Android FX 2.5.0.5 [Unity/AML][v2.5] by ahrion
Will AP still work with this if I dirty flash?
Yeah, I'd like to know if AP will pass, too.
Ya safetynet is passing with this installed.
Anyone tried this with Dolby add-on? Either Atmos or Digital?
Tx guys.
Can we uninstall super SU and suhide to flash magisk without wiping data and flashing factory image.. i see that arise amd viper mod need migisk
Rajaasim1980 said:
Can we uninstall super SU and suhide to flash magisk without wiping data and flashing factory image.. i see that arise amd viper mod need migisk
Click to expand...
Click to collapse
Try to unroot device through supersu app. This normally works on my device. If device doesn't boot after this flash factory image deletinng "-w" in flash-all.bat. In supersu thread you also find somewhere a unsu.zip to flash in recovery to totally unroot a device.

Lost root after updating to Magisk Manager 5.9

I installed an update to Magisk Manager to v5.9 via the Magisk Manager app. Then when I went back into Magisk Manager, I found that I had lost root (i.e. nothing shows up in the left drawer of the app and no root apps work). I tried flashing the Uninstaller.zip and reflashing TWRP and Magisk v16, but it still did not re-root my device. I'm running OOS 5.1.5 with Magisk Manager v5.8.3, and bluespark TWRP v8.69.
Hi
there is a new version of Magisk Manager (5.9.1) and after it will download the new version of Magisk 17.1 !
everything's ok for me on OB15
Rebel242 said:
Hi
there is a new version of Magisk Manager (5.9.1) and after it will download the new version of Magisk 17.1 !
everything's ok for me on OB15
Click to expand...
Click to collapse
You're right. Flashed v17.1 and now regained root access. Thx

Categories

Resources