Develop Bugs

Installed full 3.2.8, help with xposed?

So I wont say I tried everything but have been reading and trying solutions and they havent worked for me. Maybe someone can point me in a different right direction. So far I clean installed 3.2.8(twice btw), I'm fastbooting into twrp 3.0.2-1, flashed supersu 2.78 SR4 and flashed xposed framework v87.
Sometimes xposed framework v87 flashes in twrp and when I open xposed installer it says xposed framework is not installed. I attempt to then unintstall and try again and sometimes it fails in twrp with this message "cp: cant create '/system/xposed.prop':Read-only file system". I attached a screenshot. I'm also running xposed installer 3.1.1, also tried 3.0.1 by dvdandroid. Any suggestions?

Have you tried Magisk and Systemless Xposed?

mznk said:
Have you tried Magisk and Systemless Xposed?
Click to expand...
Click to collapse
Are you asking if I tried it in the past on my onplus3? I didnt see anyone trying it now with 3.2.8 so I didnt think of it.

SysAdmNj said:
Are you asking if I tried it in the past on my onplus3? I didnt see anyone trying it now with 3.2.8 so I didnt think of it.
Click to expand...
Click to collapse
I'm using it on 3.2.8 currently and all works well so far.
Here's how I did it: Clean flashed 3.2.8 using sideload with official recovery, then booted twrp-3.0.2-1 (from twrp.me), flashed Magisk v9 and flashed the phh-superuser. After booting into android, installed phh's SuperUser from Playstore, and installed Magisk Manager, then installed Xposed systemless arm64 sdk23 using the inbuilt downloader (or use the zip on the thread).

mznk said:
I'm using it on 3.2.8 currently and all works well so far.
Here's how I did it: Clean flashed 3.2.8 using sideload with official recovery, then booted twrp-3.0.2-1 (from twrp.me), flashed Magisk v9 and flashed the phh-superuser. After booting into android, installed phh's SuperUser from Playstore, and installed Magisk Manager, then installed Xposed systemless arm64 sdk23 using the inbuilt downloader (or use the zip on the thread).
Click to expand...
Click to collapse
Thanks it all worked and went green except when I tried to download the systeless arm64 sdk23 from within magisk manager. I ended using a test1 version and it went through. Now I wasnt even planning on using magisk but how are you using magisk? When I used it before it was for android pay but I thought that all broke.

Installing xposed breaks SafetyNet anyways and I have no use of Android pay or Pokemon Go etc.
But, with magisk I can install and mod system files without making changes in the system partition like dpi, Viper, SystemUI mods etc. I really like it for the ease of that.

I have installed Xposed on 3.2.8 with a success from the beginning. Steps I've taken:
1. Dirty flashing full zip OOS 3.2.8.
2. Flashing systemless SuperSU from Chainfire (you have to:
Code:
echo SYSTEMLESS=true >> /data/.supersu
for systemless).
3. Flashing Xposed v87-test version, which now disappeared from dl-xda.xposed.info/framework/sdk23/arm64/
4. Flashing ElementalX 0.28.
I was upgrading from 3.2.6.

mznk said:
I'm using it on 3.2.8 currently and all works well so far.
Here's how I did it: Clean flashed 3.2.8 using sideload with official recovery, then booted twrp-3.0.2-1 (from twrp.me), flashed Magisk v9 and flashed the phh-superuser. After booting into android, installed phh's SuperUser from Playstore, and installed Magisk Manager, then installed Xposed systemless arm64 sdk23 using the inbuilt downloader (or use the zip on the thread).
Click to expand...
Click to collapse
OxygenOS 3.2.7 with v87.1 Magisk version installed. Got stuck at boot animation when dirty flashing to oos 3.2.8. Any ideas? Is there compatibility problem with xposed modules?

I would use a newer recovery, twrp-3.0.2-23-oneplus3 is the latest and I've had zero issues with it. I uploaded it to drive vs searching for it. Next, as stated, install Xposed via the app, version 3.0.1 by dvdandroid is what I'm using and after selecting arm64 api23 , granting root, it installs, reboot and done.

Magisk + Phh Superuser does not work in F2FS.

I tested most Nougat custom roms. (except Oxygen 4.0.x)
However, none of them worked with Magisk + Phh Superuser. (can't get root access)
(data,cache filesystem : F2FS)
anyone else?
please help...
--
It worked on Sultan's CM13. (MM)

smk513 said:
I tested most Nougat custom roms. (except Oxygen 4.0.x)
However, none of them worked with Magisk + Phh Superuser. (can't get root access)
(data,cache filesystem : F2FS)
please help...
--
It worked on Sultan's CM13. (MM)
Click to expand...
Click to collapse
Magisk v9 + Phh was working fine a month ago when I was using CM14.1.
Don't know which custom roms you were using but many of them have root already included, so you'll have to remove the SU that's included in the ROM before you Magisk + Phh.
Order I've done it in the past:
1. Flash ROM
2. Flash GAPPS (if necessary)
3. Flash unSU Script link
4. Flash Magisk and Phh
5. Wipe Cache/Dalvik (just a habit and a damn good one)
and hopefully you know the rest of the steps.

Magisk v9 works fine with oxygen 3.2.8 (blue spark kernel and data and cache f2fs), but WiFi stops working if I flash v10.2.
Does someone know why? Thanks in advance

My config is a 4.0.1 OOS + 10.2 magisk + phh by topjohnwu v2. Working good so I dunno why you have some issues when we have same phones :/

Mine works with Open 10 beta and did you install the phh superuser app?

Hw4ng3r said:
Magisk v9 + Phh was working fine a month ago when I was using CM14.1.
Don't know which custom roms you were using but many of them have root already included, so you'll have to remove the SU that's included in the ROM before you Magisk + Phh.
Order I've done it in the past:
1. Flash ROM
2. Flash GAPPS (if necessary)
3. Flash unSU Script link
4. Flash Magisk and Phh
5. Wipe Cache/Dalvik (just a habit and a damn good one)
and hopefully you know the rest of the steps.
Click to expand...
Click to collapse
I tested it su removed, so I tried without remove su, but doesn't work.
(Magisk v10.2 + phh v2)

mucha.k1994 said:
My config is a 4.0.1 OOS + 10.2 magisk + phh by topjohnwu v2. Working good so I dunno why you have some issues when we have same phones :/
Click to expand...
Click to collapse
This problem occurs with custom ROMs. other than Oxygen 4.0.x.

adz3d said:
Mine works with Open 10 beta and did you install the phh superuser app?
Click to expand...
Click to collapse
Yes, installed the phh superuser app. I've been using phh since MM.

I read in another thread that on F2FS only the normal phh SuperUser works. I haven't tried it myself though. SuperSU has occasional issues on F2FS as well, irrespective of the ROM (OOS or Lineage based).

I have Magisk and Magisk's phh's superuser on 4.0.1 on F2FS (data partition). Using eng.stk's v11 TWRP, I:
1. Flashed OOS 4.0.1
2. Booted to system, installed some apps
3. Flashed Magisk 10.2, then topjohnwu's r2 phh superuser
4. Boot to system
All works fine.

ememeh said:
I have Magisk and Magisk's phh's superuser on 4.0.1 on F2FS (data partition). Using eng.stk's v11 TWRP, I:
1. Flashed OOS 4.0.1
2. Booted to system, installed some apps
3. Flashed Magisk 10.2, then topjohnwu's r2 phh superuser
4. Boot to system
All works fine.
Click to expand...
Click to collapse
This problem occurs with custom ROMs. other than Oxygen 4.0.x.

smk513 said:
This problem occurs with custom ROMs. other than Oxygen 4.0.x.
Click to expand...
Click to collapse
Okay. In the main Magisk thread someone recently mentioned that phh's r259 was working on DU on OP3. Could give that a bash

ememeh said:
Okay. In the main Magisk thread someone recently mentioned that phh's r259 was working on DU on OP3. Could give that a bash
Click to expand...
Click to collapse
Thanks for the information. i'll try it.

I think it's been well known for a while that phh superuser does not like F2FS. Since like August according to the topjohnwu phh superuser thread.

How to log into snapchat with root?

Hey guys I'm running stock OOS 4.1.0 with franco kernel and supersu. I can't log into snapchat, it gives me the log in temporarily failed error.
I've even tried fully unrooting via the supersu app and it still doesn't allow me to log in... Any work arounds? Would be much appreciated, thanks!

Dirty flash OOS 4.1.0, log in to snapchat, then flash SuperSU. You could also try Chainfire's HideSU.
Alternatively, root with Magisk and use Magisk Hide.

Anova's Origin said:
Dirty flash OOS 4.1.0, log in to snapchat, then flash SuperSU. You could also try Chainfire's HideSU.
Alternatively, root with Magisk and use Magisk Hide.
Click to expand...
Click to collapse
Thanks mate!

How do you install Magisk on Oneplus 3 OOS 4.1.3

I tried to install magisk v12 zip but it always fails but says to install supersu soon after. I did that but when i installed magisk manager it said there's no MagiskSU installed and Safety net did not pass as well! Then i tried to uninstall supersu and magisk and flash magisk v12 again but same result again. I tried find how to install MagiskSU online but i can't find any thread about this issue. My aim of installing Magisk is to use MagiskHide for snapchat. Can someone help me pls.:crying:

Are you on SuperSU at the moment?
You will need to unroot using the SuperSU app (That's what I did) before flashing magisk zip.
Secondly, I had trouble with SuperSU + Magisk so I used phh superuser to get it working. I also needed magisk to hide root from snapchat and another banking app and I am able to do so easily.
So, in short,
1. Uninstall SuperSU
2. Flash magisk zip in recovery
3. Flash phh superuser in recovery (People say its optional but I do it anyway)
4. Reboot and benefit

Can you send me a link to download the phh superuser file you used please. When you say uninstall do you mean full unroot? What did you use to uninstall supersu? https://forum.xda-developers.com/showpost.php?p=63615067&postcount=2459

Magisk v12 will auto install root when no root is detected, so u can just clean flash ur rom and install magisk v12 after it, it will auto root

@mharis05 nowadays Phh's Superuser is not "optional": it's unsupported and replaced by the integrated MagiskSU since Magisk v10: look at the official thread, it's declared obsolete.
It would get device in trouble, even if MagiskSU is disabled.
 @Bradl79 neither the clean flash is a right way, because:
1) If you're intending a system wipe, it's not resolutive because Magisk is OTA-survival.
2) If you're intending a data wipe, it's an useless waste of time... and data!
You have to run the following zip files: Magisk official uninstaller and UnSU to be sure you've not rooted device in any way.
Then to stay quiet, do a Cache and Dalvik/ART wipe.
At this point, try to reflash Magisk.

I tried that but time and time again when i try to uninstall that SUPERSU it says to flash default boot.img to complete the process. AND Installation "FAILED" Flash Supersu immediately. I did that but still no magiskSU.

At this point try to wipe system and cache/ART, then reflash OOS.
After doing that, go with Magisk.

magisk not working on all OOS OREO ROMS

Hello xda community.
I got some knowledge about flashing stuff on my oneplus 3. But Since I use Android oreo beta 29, 30, or stable 5.0 OOS version even when I use the aroma installer from Freedom OS. Magisk doesn't install propobly. .
Im using latest Twrp from Bluespark 3.2.1 -X
I can flash most off the magisk versions 15.0 - 15.1 - 14.6 without bootloops. I tried alot off them but when I boot the phone magisk is not installed.(there is no Magisk app)
When I install the magisk apk. the magisk is also telling me magisk is not installed.
On beta 29 SuperSU was working didn't try it yet on beta 30 but I really want to use Magisk.
I'm reading the forums here also on the OP community but seems like I'm the only one with this problem.

uninstall magisk app from the rom, flash rom again and then flash magisk 15.3... works fine

theduke7 said:
uninstall magisk app from the rom, flash rom again and then flash magisk 15.3... works fine
Click to expand...
Click to collapse
Thanks for your reply.
I did a clean flash Beta 29 also on 30.
15.3 is not working to for me....

Ghost123NL said:
Thanks for your reply.
I did a clean flash Beta 29 also on 30.
15.3 is not working to for me....
Click to expand...
Click to collapse
flash the rom then reboot to recovery then flash magisk... don't flash immediately after the rom ....

theduke7 said:
flash the rom then reboot to recovery then flash magisk... don't flash immediately after the rom ....
Click to expand...
Click to collapse
Also not working.
same steps with supersu is working only

Ghost123NL said:
Also not working.
same steps with supersu is working only
Click to expand...
Click to collapse
maybe the only way to make sure is to wipe everything , did you try with custom kernel?
try to flash rom reboot to recovery, then derp kernel (tested and works on latest beta) , then flash magisk... that worked for me at 1st try.

Flash magisk 14.0 and boot see magical working and then update magisk15.3 via magisk manager application.

Use OOS debloater from the themes and apps section to remove some apps from the system. Then reinstall magisk. Problem solved. We have a lot less space left in the system partition and that's the reason magisk is silently failing to install.

Facing same issue