I bought these full price from Amazon since right now there are no case deals yet that I've seen.
Mustaner smooth hard minimal case
https://www.amazon.com/gp/product/B01KPEMZZS
I gave it a 3 star review - it definitely is smooth, but to the point it feels like it is going to slide right out of your hand. Also, camera cutout does not have a lip and the sensor sticks out slightly even with the case.
Ringke onyx case
https://www.amazon.com/gp/product/B01K5I9CB4
This is the one I'm going to be running as my daily driver. Defintiely offers some good protection all around. The sides are textured and offer a nice grip to it. I'm giving it a 5 star because all around it is an awesome case. Adds a little bulk but nothing terrible that detracts from the phone.
I just wish there was a minimalistic case that had some slight texture and protected the camera.
Im stuck between ... https://www.amazon.com/Spigen-Rugge...&keywords=lg+v20+case&refinements=p_89:Spigen or https://www.amazon.com/VRS-Brushed-...words=lg+v20+case&refinements=p_89:VRS+DESIGN ... I know the Spigen is less bulkier ... But the VRS looks nice
I got this one...arriving today I'll reply with feedback. I had one for Note 4 that fit license and one credit card...Got used to not carrying wallet.
https://www.amazon.com/gp/product/B01M0EBEXZ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I did a quick look at wallet case for the V20 .. there was only one model ahaha... until I find a full coverage case like otterbox/lifeproof I will stick to that. I doubt that my phone holster i got for the note 7 will work on with it though =/ It was design for the ip7 and the note 7 was slightly smaller so I knew that fit but v20 is bigger. Without the case I know it fit... with it ... errr >.>
Drey070 said:
Im stuck between ... https://www.amazon.com/Spigen-Rugge...&keywords=lg+v20+case&refinements=p_89:Spigen or https://www.amazon.com/VRS-Brushed-...words=lg+v20+case&refinements=p_89:VRS+DESIGN ... I know the Spigen is less bulkier ... But the VRS looks nice
Click to expand...
Click to collapse
I ordered the VRS and honestly it looks less bulkier then anything I have seen. It's a hard case not tpu so that's nice
this one adds some width...but definitely what I want.....
https://www.amazon.com/Wallet-Vena-...8&qid=1477076493&sr=1-22&keywords=lg+v20+case
Obliq Flex Pro
I purchased this one https://www.myphonecase.com/collections/lg-v20/products/obliq-flex-pro-lg-v20-case-black
On the Obliq site its sold out.
19.99 with 10% coupon code total $17.96
used coupon code Limited time 10% off code: MPC10
I'm looking for the most minimalist case possible that will provide basically scratch protection...not really looking for one that is designed for "drop" protection.
Reason for the thinner case is due to my car holder clip which barely is able to keep my previous V10 without a case stable.
I was considering this one...https://www.amazon.com/dp/B01LQV7VCQ/ref=psdc_3081461011_t2_B01M0HW9P4
Thoughts?
dragion said:
I'm looking for the most minimalist case possible that will provide basically scratch protection...not really looking for one that is designed for "drop" protection.
Reason for the thinner case is due to my car holder clip which barely is able to keep my previous V10 without a case stable.
I was considering this one...https://www.amazon.com/dp/B01LQV7VCQ/ref=psdc_3081461011_t2_B01M0HW9P4
Thoughts?
Click to expand...
Click to collapse
Do you like skins like dbrand?
dwertz said:
Do you like skins like dbrand?
Click to expand...
Click to collapse
I was also looking at skins (dbrand)...but a TPU case seems to be the cheaper alternative.
---------- Post added at 04:41 PM ---------- Previous post was at 04:30 PM ----------
Here's a "cheaper" one...comparison to the Spigen?
https://www.amazon.com/LG-V20-Skmy-...coding=UTF8&psc=1&refRID=P9XGTBDJ1C60ZSS01YM4
There is several that "looks" the same, but is it worth going with the Spigen?
I have the spigen crystal on as I type this. Clean and minimalistic. Offers a raised lip around the display, and offers a raised lip around the camera bump. Solid non-slipping gripability on back and sides. A little too shiny and floppy around the edges though. A good basic protector.
Sent from a TMo V20
Just ordered the Spigen Liquid Crystal Case along with a set of Anker USB-C to Micro USB Adapters via Amazon Prime...should receive them this Tuesday.
dragion said:
I was also looking at skins (dbrand)...but a TPU case seems to be the cheaper alternative.
---------- Post added at 04:41 PM ---------- Previous post was at 04:30 PM ----------
Here's a "cheaper" one...comparison to the Spigen?
https://www.amazon.com/LG-V20-Skmy-...coding=UTF8&psc=1&refRID=P9XGTBDJ1C60ZSS01YM4
There is several that "looks" the same, but is it worth going with the Spigen?
Click to expand...
Click to collapse
I just received that case today and is made out a thick material.I buy the same kind of case for all my phone and this one is thickest one yet.
techrider6262 said:
I just received that case today and is made out a thick material.I buy the same kind of case for all my phone and this one is thickest one yet.
Click to expand...
Click to collapse
Is that bad or good?
dragion said:
Is that bad or good?
Click to expand...
Click to collapse
Better protection than the ones that i've bought before and it also has a raised lip around screen.
techrider6262 said:
Better protection than the ones that i've bought before and it also has a raised lip around screen.
Click to expand...
Click to collapse
Perfect! :good:
Exactly what I was looking for.
nest75068 said:
I bought these full price from Amazon since right now there are no case deals yet that I've seen.
Mustaner smooth hard minimal case
https://www.amazon.com/gp/product/B01KPEMZZS
I gave it a 3 star review - it definitely is smooth, but to the point it feels like it is going to slide right out of your hand. Also, camera cutout does not have a lip and the sensor sticks out slightly even with the case.
Ringke onyx case
https://www.amazon.com/gp/product/B01K5I9CB4
This is the one I'm going to be running as my daily driver. Defintiely offers some good protection all around. The sides are textured and offer a nice grip to it. I'm giving it a 5 star because all around it is an awesome case. Adds a little bulk but nothing terrible that detracts from the phone.
I just wish there was a minimalistic case that had some slight texture and protected the camera.
Click to expand...
Click to collapse
I have the onyx case as well. I'm liking it. The carbon fiber looks good too. Currently waiting for another one i ordered.
Sent from my LG-H918 using Tapatalk
Where the hell are the ringke or spigen slim hard cases I always buy?
Is it just me or does the case selection kind of suck so far on this phone? I know it's not even the official release date yet but hopefully the case selection will get better.
Sent from my VS995 using Tapatalk
My go to case manufacturer has gauged not enough interest in this phone so Diztronic will not be making a TPU case or any case for it unfortunately.
Related
Hi All
So the hunt for a good Protective Rubber Gel Back Case for Note begins... similar to this one would be great!!
http://www.dealextreme.com/p/protec...one-back-case-for-i9100-galaxy-s2-black-70754
The minute I find one I'll buy it... I actually prefer getting the case even before I buy the Note.
Brgds... /Tubgirl
I'm with you, this phone is too expensive to damage. I've been searching everyday and have yet to find anything. I usually prefer Ballistics' cases but I doubt they will be making one for this phone so it's back to the drawing board. I'm also wondering if zagg will be making a screen protector for this device. Don't know what I can expect with such a massive device. Maybe turn to the manufacturers of the best tablet cases... I'll post here when I find some cases.
iLiberate said:
I'm with you, this phone is too expensive to damage. I've been searching everyday and have yet to find anything. I usually prefer Ballistics' cases but I doubt they will be making one for this phone so it's back to the drawing board. I'm also wondering if zagg will be making a screen protector for this device. Don't know what I can expect with such a massive device. Maybe turn to the manufacturers of the best tablet cases... I'll post here when I find some cases.
Click to expand...
Click to collapse
I facebooked Both Ballistic and Otterbox and they both say they don't have any plans for a case.
I'd hate to use my Note without a really good case. Maby i'll make one out of wood...
blobotorian said:
I facebooked Both Ballistic and Otterbox and they both say they don't have any plans for a case.
I'd hate to use my Note without a really good case. Maby i'll make one out of wood...
Click to expand...
Click to collapse
I'm liking the little brown case that just has a front flat that opens up like a book but it's not protective at all lol
Me too but I can't find a link to buy it yet. Expansys has blue and white...... Yuck..
Sent from my GT-P1000 using Tapatalk
I think the case of expansys is sleek. It's not making the note any thicker.
Hope they got variety of colors though..
samsung flipover
Samsung will come with a flipover, the back of the flipover will replace the original back of the note. So the note will only become a few mm thicker
I'm also looking to get the Samsung flipover cover when it becomes available. The only problem is the side of the Note remains unprotected, I'm thinking getting a gel case and trim off the left hand side so it will fit togther with the flipover cover.
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
deliriousbb said:
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
Click to expand...
Click to collapse
How does the screen protector feel? I know the Skinomi's tablet protector feels rubbery.
deliriousbb said:
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
Click to expand...
Click to collapse
The carbon fibre film must just be 3m di-noc carbon fibre, can be had much cheaper on Ebay and you can just custom cut it to any device.
I wont be sludging up my screen with a screen protector
RMXO said:
How does the screen protector feel? I know the Skinomi's tablet protector feels rubbery.
Click to expand...
Click to collapse
I used the Carbon Fiber skin on my Streak and loved it .. I will order one for my Note.
Tubgirl said:
Hi All
So the hunt for a good Protective Rubber Gel Back Case for Note begins... similar to this one would be great!!
http://www.dealextreme.com/p/protec...one-back-case-for-i9100-galaxy-s2-black-70754
The minute I find one I'll buy it... I actually prefer getting the case even before I buy the Note.
Brgds... /Tubgirl
Click to expand...
Click to collapse
yup....looking for the same but no luck.
The flip cover is not practical IMHO esp when making calls.
I always used to get hard crystal clear cases such as
http://www.ebay.co.uk/itm/Clear-Cry..._MobilePhonesCasesPouches&hash=item3f0fa5fde0
for my phones.
But lately ive really liked the TPU gel case with stand, such as:
http://www.ebay.co.uk/itm/BLACK-TPU...204593?pt=PDA_Accessories&hash=item3f0db99071
Which is just like the case in the OP really
The stand is surprisingly useful!
---------- Post added at 10:32 PM ---------- Previous post was at 10:28 PM ----------
http://www.clove.co.uk/samsung-galaxy-note-official-flip-cover-case-black
is the only case i can find at the moment
Everyone who doesn't need the case right away, wait til piel frama comes out with a imagnum type of case. This case is expensive but it protects your device against any earthquake you throw at it. I have one for my hd2 and getting one for the note cause my hd2 is still like new. You can put in your e-mail and they'll let you know when it's there to buy. Here's the link
http://www.pielframa.com/samsung-galaxy-note-cases.htm
Cheers
Sent from my HTC HD2 using XDA App
MassoltoV said:
Everyone who doesn't need the case right away, wait til piel frama comes out with a imagnum type of case. This case is expensive but it protects your device against any earthquake you throw at it. I have one for my hd2 and getting one for the note cause my hd2 is still like new. You can put in your e-mail and they'll let you know when it's there to buy. Here's the link
Cheers
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
If they release a case like this for the Note I think it might be worth a try. The kickstand could be useful.
w w w.pielframa. c o m/ apple-iphone-4s-cases-imagnum2.htm
drhoades01 said:
If they release a case like this for the Note I think it might be worth a try. The kickstand could be useful.
w w w.pielframa. c o m/ apple-iphone-4s-cases-imagnum2.htm
Click to expand...
Click to collapse
You're so right! This type i would use fore use @ home and the solid closed imagnum case for outside
Sent from my HTC HD2 using XDA App
Guys do you think a leather/cloth Pouch Pull case would be good enough?
E.g: I though I had more posts here. Anw can't post complete link. The below works tho.
images.esellerpro.com/2209/I/334/07/Samsung%20Galaxy%20S%202%20Black%20Leather%20Pouch%20Open.jpg
I hate any other cases. Screen protector will be fitted of course.
Just found these. I am about to order one right now...
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001331&products_id=33857
zenbbqmaster said:
Just found these. I am about to order one right now...
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001331&products_id=33857
Click to expand...
Click to collapse
I'm considering this one as well. Please post your thoughts when you receive it.
Hey guys,
I used to post video reviews on the Nexus S and Galaxy S II forums but now that I've gotten my Galaxy Nexus I will start covering cases and accessories for the device. Today I've got the Diztronic TPU Matte Black Case, which is a simple case that hugs your device and offers a decent level of protection. I definitely like the look and feel, and apart from some minor annoyances, it's a definite winner.
Full review below:
Thanks for the review. A couple of questions...first, is the texture of the matte finish similar to that of a silicone case? I'm not a fan of silicone cases as they do not slide in and out of pockets well and also gather lint easily. Second, about how thick do you think the case is? I am wondering if it the phone will ever fit into a dock with the case on which has me confused as to why they would include the cutout for the 3 contact charging pins...Thanks again!
dgwood12 said:
Thanks for the review. A couple of questions...first, is the texture of the matte finish similar to that of a silicone case? I'm not a fan of silicone cases as they do not slide in and out of pockets well and also gather lint easily. Second, about how thick do you think the case is? I am wondering if it the phone will ever fit into a dock with the case on which has me confused as to why they would include the cutout for the 3 contact charging pins...Thanks again!
Click to expand...
Click to collapse
Hi,
The matte texture is similar but not as 'heavy' as the one on silicone cases, which tend to be sticky and tacky. This case slides in and out of the pocket very easily and as I mentioned, shows no fingerprints or dust collection.
The case is probably about 3 mm thick, perhaps a little less.
I'm sure the case won't fit in a dock, however there may be an alternate usage for the pins, we can only hope so!
nice review, how long did delivery take?
Also, what screen protector are you using?
coleburns said:
nice review, how long did delivery take?
Also, what screen protector are you using?
Click to expand...
Click to collapse
3 days and I am using the included screen protector you get within the package, will get the job done as it is pretty decent but there are better options.
Which screen protectors do you recommend though? I've tried a few here in the uk and they are all ****
I recommend any SGP screenshield. They've got 2 models currently. Sgpstore.com
Sent from my Galaxy Nexus using XDA App
Just another chime in... I've got this case and it works great on the GSM GN. I like the matte finish.
Like others I'm on the lookout for a nicer screen protector. The included one is just a tad small. Would prefer one that is large enough to slide under the edges of the case.
Sent from my Galaxy Nexus using XDA App
Ploone said:
I recommend any SGP screenshield. They've got 2 models currently. Sgpstore.com
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Check out the pics I took of the SGP Ultra Oleophobic.
http://forum.xda-developers.com/showpost.php?p=19900516&postcount=18
Do you think it would be possible to cut out a slot ourselves for the volume rocker?
Does the texture of the case make the phone slippery in your hand? I have a TPU case for my Galaxy Tab 10.1 that appears to be made of the same sort of material and it always would slip through my hands because it was a very hard texture. I ended up getting a high gloss tpu case for that which was a bit more grippy. How would you compare this to a high gloss? Do you think it offers a good amount of grip like high gloss or no?
Probably I'm going to buy this TPU skin, is seems to be actually the best (reading opinions in xda and amazon.com).
But i have a question about the screen protector that comes with te case: do it cover all the screen (or is it like this http://www.youtube.com/watch?v=YdRSRROffO4 ) ??
Thanks
edit: and, the TPU case is not glossy, true?
this fits both the lte and gsm?
My case mate showed tbats a bad idea
Sent from my Galaxy Nexus using xda premium
matteventu said:
Probably I'm going to buy this TPU skin, is seems to be actually the best (reading opinions in xda and amazon.com).
But i have a question about the screen protector that comes with te case: do it cover all the screen (or is it like this http://www.youtube.com/watch?v=YdRSRROffO4 ) ??
Thanks
edit: and, the TPU case is not glossy, true?
Click to expand...
Click to collapse
Add another question: are SURE that the Diztronic perfectly fit the GSM version of the Galaxy Nexus? there is no gap also after some day of use?
And are the volume buttons comfortely to be pushed?? (excuseme if you explain all this answer on the videoreview, but i don't understand talked english ).
Thanks
ot: somenoe know if the "TPU-Cases" reseller (the only one that sell Diztronic cases) on eBay is the official shop of Diztronicā¢ (formerly TPU-Cases)
??
I have the same case. Very good and a nice complement to the phone.
---------- Post added at 07:42 PM ---------- Previous post was at 07:37 PM ----------
matteventu said:
Probably I'm going to buy this TPU skin, is seems to be actually the best (reading opinions in xda and amazon.com).
But i have a question about the screen protector that comes with te case: do it cover all the screen (or is it like this http://www.youtube.com/watch?v=YdRSRROffO4 ) ??
Thanks
edit: and, the TPU case is not glossy, true?
Click to expand...
Click to collapse
Screen protector that comes with it is smaller than the phone screen. Lets just say that it leaves 1.5 mm all around uncovered. That's why I have ordered another set of separate screen protectors now. But it gets the job done but I am not too happy with it.
Case is and isn't glossy. Sides and back is matte soft touch coating. However the front border of the case is shiny flexible rubber that looks pretty cool and gives it a high end look.
hope this helps.
Ploone said:
I recommend any SGP screenshield. They've got 2 models currently. Sgpstore.com
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
I bought the SGP model for the Nexus and it's cut very small, smaller than the ones we include with our cases. I'm still looking for a screen protector that covers the entire display.
---------- Post added at 02:47 PM ---------- Previous post was at 02:46 PM ----------
enaybee said:
I have the same case. Very good and a nice complement to the phone.
---------- Post added at 07:42 PM ---------- Previous post was at 07:37 PM ----------
Screen protector that comes with it is smaller than the phone screen. Lets just say that it leaves 1.5 mm all around uncovered. That's why I have ordered another set of separate screen protectors now. But it gets the job done but I am not too happy with it.
Case is and isn't glossy. Sides and back is matte soft touch coating. However the front border of the case is shiny flexible rubber that looks pretty cool and gives it a high end look.
hope this helps.
Click to expand...
Click to collapse
I've yet to find one that is bigger than ours and I've ordered 3 now. Let me know if you find one.
---------- Post added at 02:47 PM ---------- Previous post was at 02:47 PM ----------
matteventu said:
Add another question: are SURE that the Diztronic perfectly fit the GSM version of the Galaxy Nexus? there is no gap also after some day of use?
And are the volume buttons comfortely to be pushed?? (excuseme if you explain all this answer on the videoreview, but i don't understand talked english ).
Thanks
ot: somenoe know if the "TPU-Cases" reseller (the only one that sell Diztronic cases) on eBay is the official shop of Diztronicā¢ (formerly TPU-Cases)
??
Click to expand...
Click to collapse
Our eBay user id is: post3rs. I am using our case on the GSM version and it fits perfectly. I find the volume buttons to be extremely easy to press, although 1 customer told me they don't agree. In all honesty it might be one of the easiest volume buttons I've pushed on a TPU case.
OneStepAhead said:
I bought the SGP model for the Nexus and it's cut very small, smaller than the ones we include with our cases. I'm still looking for a screen protector that covers the entire display.
---------- Post added at 02:47 PM ---------- Previous post was at 02:46 PM ----------
I've yet to find one that is bigger than ours and I've ordered 3 now. Let me know if you find one.
---------- Post added at 02:47 PM ---------- Previous post was at 02:47 PM ----------
Our eBay user id is: post3rs. I am using our case on the GSM version and it fits perfectly. I find the volume buttons to be extremely easy to press, although 1 customer told me they don't agree. In all honesty it might be one of the easiest volume buttons I've pushed on a TPU case.
Click to expand...
Click to collapse
Wow, thanks for the official support (I've read on amazon the review of the user that say the volume controls are not easy to press, and your answer to him)
Yes, I bougth the case from you, post3rs, it has shipped to italy today (I'm a.delu.59).
Now I'm more happy than before to bought the Diztronic case
I have this TPU case and I like it. The only thing I don't care for most of the TPU cases is while the power button is open, the volume rocker is not, so the case gets in the way somewhat. Now I guess I could get out my xacto knife and engineer my own solution but that's not the point LOL.
I started using the toughcase I got last week since I'm a little concerned there isn't enough TPU material to protect the phone? But...it's definitely thin and unobtrusive and feels good in the hand and it also doesn't block any of the ports. It also doesn't attract dust or pocket lint like a magnet like the toughcase silicone. There are tradeoffs for anything I guess.
I bought this case too, from Amazon, though in the smoke translucent matte version.
http://www.amazon.com/Diztronic-Tra...UTFO/ref=sr_1_1?ie=UTF8&qid=1323792395&sr=8-1
It fits great. It's not loose at all, even though it's on a GSM version. You can read my review on that site.
I'm a bit finicky with my phones though, so I don't put it in my pocket. Too high a chance for lint/scratches otherwise, though scratches would be unlikely given the protection now. Finding a belt clip pouch to fit though was difficult. Especially for the phone with the TPU case on it! Finally got the largest one available at Verizon to work, though you really have to shove it in.
The provided screen protector is missing maybe a millimeter from either side, FYI.
Hi OneStepAhead, Are you going to have the glossy ones up on your ebay page soon also? I tried ordering from Amazon.com but they won't ship to Canada for some reason.
So like many others who have been waiting for their GS3 to be delivered to their front door steps here in the USA, I've been buying cases so I'd be ready to go from the start. My plan is buy a variety of cheap cases and bumpers to see how they feel in my wee bitty hands. So here is my review of a case worth reviewing. I haven't seen anyone mention this case so I apologize if I'm duplicating something that's already been said.
I picked up this case on Amazon for a little over $12 after shipping costs. It appeared to be marked down from $30 without shipping so I figured It was a steal. So far, I was right. It's size is very slim for a duel layer case. While it does make the phone bigger, it's not too big for my girl hands. It actually makes the phone feel a little better and comfortable in the hand.
The texture of both layers have a nice grip and feel. The matte black hard shell has a soft feel that blends well with the feel of the silicone core.
So far the hardshell has been smudge resistant and I have a good feeling scratch resistant but only time and use will tell on that part. The silicone core appear to be lint resistant, if that's even possible, compared to my Seidio Active case on my Rezound (great case by the way) that collected light to moderate pocket lint.
The case also provides a nice lip around the screen to protect it. The best part of the lip is that it doesn't get in the way of using the phone. It occupies just the right amount of real estate.
Buttons work like the real buttons. No issues with them working properly or having to apply extra pressure.
Summary: I love this case. It's solid, feels great, and was purchased at a great price.
Sent from my SCH-I535 using xda app-developers app
that logo
Sent from my SGH-T999
Xcor3 said:
that logo
Sent from my SGH-T999
Click to expand...
Click to collapse
It's actually a $40 case that I got for $12 (price went up already on the black to $12 + s/h) .......I can handle the tiny logo, and if not, I'll get out a black marker.
They have some other colors that are cheaper than the black now. Thinking about picking up a blue one.
Sent from my SCH-I535 using xda app-developers app
Anyone else using this case?
I want to know other users opinion about this case compared to the following cases:
1. Otterbox commuter
2. Incipio Silicrylic
3. Casemate Tough case
Ha! The thread lives! I can't believe more people aren't using this case or at least interested in the case. It's great and almost tripled in price since I first got it. Still cheap enough to equal a valuable purchase.
Currently not being productive on my S3.
I checked this on Amazon. All the ratings are either 4 star or 5 star. And there are 44 of them.
Does this means it is the best case for S3 or are they asking the buyers to give good ratings(I have heard some companies do so) ?
http://www.amazon.com/Acase-Samsung...S4CK/ref=sr_1_2?ie=UTF8&qid=1344272934&sr=8-2
ansonantonym said:
I checked this on Amazon. All the ratings are either 4 star or 5 star. And there are 44 of them.
Does this means it is the best case for S3 or are they asking the buyers to give good ratings(I have heard some companies do so) ?
http://www.amazon.com/Acase-Samsung...S4CK/ref=sr_1_2?ie=UTF8&qid=1344272934&sr=8-2
Click to expand...
Click to collapse
They never asked me. The case really is good as my review suggested above. I wish I bought other colors and would have if I knew the price was going to more then double.
Currently not being productive on my S3.
Nice review bud.
Sent from my SGH-T999 using xda app-developers app
txkorm said:
They never asked me. The case really is good as my review suggested above. I wish I bought other colors and would have if I knew the price was going to more then double.
Currently not being productive on my S3.
Click to expand...
Click to collapse
Few questions?
How is the back of the hard shell? is it very smooth so that it may slip away from your hand or table?
Also do you know whether it is of the same size and weight of Case mate Tough case?
I had one for my 3d, very nice case. The only reason I got rid of it was the need for a belt holster, but other than that it protected the phone very well and the rubber material did not stretch out or get flimsy.
ansonantonym said:
Few questions?
How is the back of the hard shell? is it very smooth so that it may slip away from your hand or table?
Also do you know whether it is of the same size and weight of Case mate Tough case?
Click to expand...
Click to collapse
It's smooth but I wouldn't say slippery. I've been very comfortable holding it without fear of dropping it.
I'm not familiar with the Casemate Tough but I do like it better than my Casemate Pop. The Pop! Case is very slick other than the grips on the side and it feels wider then the Acase.
Currently not being productive on my S3.
txkorm said:
It's smooth but I wouldn't say slippery. I've been very comfortable holding it without fear of dropping it.
I'm not familiar with the Casemate Tough but I do like it better than my Casemate Pop. The Pop! Case is very slick other than the grips on the side and it feels wider then the Acase.
Currently not being productive on my S3.
Click to expand...
Click to collapse
Do you use a screen protector with your case? A lot of screen protectors that go all the way to the edge of the screen are having problems with a lot of cases. I am using a Zagg HD, and I wanted to know if this case would cause it to bubble up.
Just wanted to add my two cents. Got the case very fast from Amazon. Was worried it wouldn't come but then it was delivered even before my shipping confirmation.
Anyways on to the case. Very good feel too it, not as bulky as i was expecting but still feels secure. Been using it regularly since i got it. Fits well in the pocket and doesn't attract too much lint so far. For the price, highly recommend it
Sent from my SCH-I535 using Tapatalk 2
Moozh1 said:
Do you use a screen protector with your case? A lot of screen protectors that go all the way to the edge of the screen are having problems with a lot of cases. I am using a Zagg HD, and I wanted to know if this case would cause it to bubble up.
Click to expand...
Click to collapse
Hey I have the case and yeah you would have to use a screen protector that doesnt go to the edges I had a regular screen protector and the bottom would bubble up because of the case.
I bought this case when it was $6.05 on Amazon and I would pay the current price for it because it is worth it. This is a really good case. I just wish they had made it a holster case.
got my black one this morning and I have to say that it feels great in the hand and fits perfectly.
I previously had the trident aegis and Neo hybrid but hated both of them. this is so much better and half the price. I have the seidio active too which is great to watch things using the kickstand but as an everyday case this blitzes it!
thanks for answering my questions about this in another thread.
mrbuzz1967 said:
got my black one this morning and I have to say that it feels great in the hand and fits perfectly.
I previously had the trident aegis and Neo hybrid but hated both of them. this is so much better and half the price. I have the seidio active too which is great to watch things using the kickstand but as an everyday case this blitzes it!
thanks for answering my questions about this in another thread.
Click to expand...
Click to collapse
No problem. It's too good of a case not to tell people about it.
Currently not being productive on my S3.
mrbuzz1967 said:
got my black one this morning and I have to say that it feels great in the hand and fits perfectly.
I previously had the trident aegis and Neo hybrid but hated both of them. this is so much better and half the price. I have the seidio active too which is great to watch things using the kickstand but as an everyday case this blitzes it!
thanks for answering my questions about this in another thread.
Click to expand...
Click to collapse
Why didn't you like the neo hybrid?
Sent from my SIII
---------- Post added at 01:32 AM ---------- Previous post was at 01:06 AM ----------
How is this case for pulling in and out of your Jean pockets. Is it to tight or sticky?
Sent from my SIII
bendirkss said:
Why didn't you like the neo hybrid?
Sent from my SIII
---------- Post added at 01:32 AM ---------- Previous post was at 01:06 AM ----------
How is this case for pulling in and out of your Jean pockets. Is it to tight or sticky?
Sent from my SIII
Click to expand...
Click to collapse
It's equivalent to every hybrid case I've used.
Currently not being productive on my S3.
txkorm said:
It's equivalent to every hybrid case I've used.
Currently not being productive on my S3.
Click to expand...
Click to collapse
Idk if that's good or bad or if that answers my question
Sent from my SIII
I was looking for a rugged armour case that prevents the camera bump and found the two common types of cases.
One is with a tire tread-like design and the other one has a bubble-like design. Pictures in attachments.
Which one of these would you prefer and if you have had any experience with them please do tell.
Devtaji said:
I was looking for a rugged armour case that prevents the camera bump and found the two common types of cases.
One is with a tire tread-like design and the other one has a bubble-like design. Pictures in attachments.
Which one of these would you prefer and if you have had any experience with them please do tell.
Click to expand...
Click to collapse
"Bubble" case, with reviews:
https://www.amazon.com/Motorola-Generation-Shockproof-Protective-Kickstand/dp/B06X6GMHJ7
"Tire tread" case, with reviews:
https://www.amazon.com/Moto-Plus-Case-OMOTON-Motorola/dp/B06WP1WB2L
Another "tire tread" design:
https://www.amazon.com/Moto-Plus-Case-OMOTON-Motorola/dp/B06WP1WB2L
I can't tell if the second tire tread design is the same as the first; the back appears flatter, but it just may be lighting. Either model gets higher reviews than the bubble design, and it looks way cooler.
I bought the Moto G4 version of this case, and was pleased:
https://www.amazon.com/Cimo-Shockproof-Absorbing-Protection-Motorola/dp/B01N7MTNDA
I despise the "kick stands" on smart phone cases; the phone doesn't sit level face-up on a table when the stand is retracted, and has a tendency to rock.
My G5+ carries the boring Spigen TPU case:
https://www.amazon.com/dp/B06XD1K5S6/ref=psdc_3081461011_t1_B06WP1WB2L
The Spigen fits VERY snug on the phone, the the TPU material is much firmer than I was expecting (in a good way); the button protectors are partially relieved for smooth button-pressing. I would get the Spigen again without hesitation.
androcraze said:
I bought the Moto G4 version of this case, and was pleased:
https://www.amazon.com/Cimo-Shockproof-Absorbing-Protection-Motorola/dp/B01N7MTNDA
I despise the "kick stands" on smart phone cases; the phone doesn't sit level face-up on a table when the stand is retracted, and has a tendency to rock.
My G5+ carries the boring Spigen TPU case:
https://www.amazon.com/dp/B06XD1K5S6/ref=psdc_3081461011_t1_B06WP1WB2L
The Spigen fits VERY snug on the phone, the the TPU material is much firmer than I was expecting (in a good way); the button protectors are partially relieved for smooth button-pressing. I would get the Spigen again without hesitation.
Click to expand...
Click to collapse
Of all the rugged cases you listed, I personally prefer the last two (CIMO and SPIGEN), but I must say that I am quite a fan of SPIGEN rugged cases.
I had SPIGEN on my last three phones, included my current Moto G5 plus
Neither.
Pistol grip texture is my preference.
Urban Armor Gear.
https://www.urbanarmorgear.com/products/motorola-moto-g5-plus-case
arhncmh said:
Neither.
Pistol grip texture is my preference.
Urban Armor Gear.
https://www.urbanarmorgear.com/products/motorola-moto-g5-plus-case
Click to expand...
Click to collapse
Nice reviews on Amazon, but it sure is expensive:
https://www.amazon.com/Motorola-5-2-inch-Outback-Feather-Light-Military/dp/B06XS3JKGS/
FYI, their case also does a very good job of providing a noticeable tactile difference between the power and volume bottons. On this phone, it's really easy to press volume down instead of power on. This is one of the main reasons I like UAG. They do work on the small things.
https://drive.google.com/file/d/0B0PZ28vNLgHnZ3FvMDg2X21uWjQ/view?usp=drivesdk
i have had the SPIGEN case on my g5 since I got it and it is amazing quality for like 10$
Supcase Unicorn Beetle. The best case for this hands down.
shawnchalfant said:
Supcase Unicorn Beetle. The best case for this hands down.
Click to expand...
Click to collapse
I did a search of this case. Walmart and Amazon, only sell it for the Iphone or Samsung phones.. Unless you know of another retailer who sells it for Moto. How is it the best case hands down.
doubledragon5 said:
I did a search of this case. Walmart and Amazon, only sell it for the Iphone or Samsung phones.. Unless you know of another retailer who sells it for Moto. How is it the best case hands down.
Click to expand...
Click to collapse
https://www.amazon.com/SUPCASE-Full-body-Holster-Protector-Motorola/dp/B0721MJN8F
androcraze said:
https://www.amazon.com/SUPCASE-Full-body-Holster-Protector-Motorola/dp/B0721MJN8F
Click to expand...
Click to collapse
When I fist looked it only showed for iPhone and Samsung. Lol
---------- Post added at 09:20 PM ---------- Previous post was at 09:18 PM ----------
androcraze said:
https://www.amazon.com/SUPCASE-Full-body-Holster-Protector-Motorola/dp/B0721MJN8F
Click to expand...
Click to collapse
When I first looked at Amazon it showed it for the iPhone and Samsung phones only
shawnchalfant said:
Supcase Unicorn Beetle. The best case for this hands down.
Click to expand...
Click to collapse
Noticed a lot of bad reviews for that case...
doubledragon5 said:
Noticed a lot of bad reviews for that case...
Click to expand...
Click to collapse
Spigen and CIMO cases seem to have solid reviews. I also like the Supershieldz glass protector:
https://www.amazon.com/gp/product/B06XB1HPNQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
androcraze said:
Spigen and CIMO cases seem to have solid reviews. I also like the Supershieldz glass protector:
https://www.amazon.com/gp/product/B06XB1HPNQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Well with not, what I consider really good options. I just went ahead and purchased this one.. if it sucks, then I will just send it back.. I would have preferred a Otter Box, since that is all I ever used.. But since they don't offer one for this phone. I just dove in and picked one with a lot of crappy reviews any. LOL What can I loose..
https://www.ebay.com/itm/For-Motoro...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
doubledragon5 said:
Well with not, what I consider really good options. I just went ahead and purchased this one.. if it sucks, then I will just send it back.. I would have preferred a Otter Box, since that is all I ever used.. But since they don't offer one for this phone. I just dove in and picked one with a lot of crappy reviews any. LOL What can I loose..
https://www.ebay.com/itm/For-Motoro...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
Click to expand...
Click to collapse
The built-in screen protector models usually get mediocre reviews; either folks love them or hate them. Some models get refraction, and others have sensitivity issues.
I've always purchased the self-apply screen guards and standard cases; I get more flexibility, and costs are significantly less.
Does anyone know of a battery case that fits this phone? I've been searching and can only find a few for the G5 models, nothing for the G5S+
Wraithxt1 said:
Does anyone know of a battery case that fits this phone? I've been searching and can only find a few for the G5 models, nothing for the G5S+
Click to expand...
Click to collapse
By what do you mean battery case? I bought a case for this phone, but it hasn't arrived yet. I have already sent my Moto G5 Plus back to the store. So if you need a case I will give it to you if you want when it arrives.
FWIW, the Spigen-style case turned out much better than the Diztronic, and can be found on eBay for $2-4. Mostly corrects for what I consider to be a recent ergonomic design fad flaw: curved edges.
A case I had back on the S7 they are making for the S10e is
https://www.amazon.com/gp/product/B07MQRVRGG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I love that the case is a slim case with a stand so I can watch movies and it easly slide into the hoster and you can rotate the holster 90 as I like it in landscape.
Just though I would share it.
I had a Samsung case included, feels like rubbery plastic I don't like it at all, this has to be awarded as the slipperiest case in the world. Already ordered a Supcase I'll post pictures once it arrives
This one
Ringke Fusion-X Designed for Galaxy S10e (5.8") Case
I have it and love it. Reminds me of UAG case without the price. It's like 12 bucks in Amazon
Samsung Pattern Cover Cases
They come with the international versions free in the box. They have holes all over them, sell them from Samsung Store in Ireland. Seems they won't ship to the USA. Anyone know where I can buy a couple ??
Thank You very much,
Vinny
Sent from my SM-G970U using Tapatalk
I heart my Ringke Fusion case for my s10e!
Clayter21 said:
This one
Ringke Fusion-X Designed for Galaxy S10e (5.8") Case
I have it and love it. Reminds me of UAG case without the price. It's like 12 bucks in Amazon
Click to expand...
Click to collapse
i found $3.39 on ebay. at first i wanted to try it but then changed my mind. not crazy about X design. I like more plain clear good quality tpu style or 2 layer hybrid. bought a different one for a around the same price with a ring holder. also has holes for a wrist strap.
I ordered spigen tough armor and I like it.
Sent from my SM-G970F using Tapatalk
Good starter case https://www.amazon.com/gp/product/B07MCVW825/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Until I saw this one https://www.tech21.com/en_us/evo-check-samsung-galaxy-s10e
Simple and effective https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/352616304209
slamor said:
Good starter case https://www.amazon.com/gp/product/B07MCVW825/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Until I saw this one https://www.tech21.com/en_us/evo-check-samsung-galaxy-s10e
Click to expand...
Click to collapse
I got the tech21 in smokey black at Verizon when I got the phone. Nothing super special, just a semi-transparent TPU case. Does its job well and looks nice on my blue S10e, but it's just a TPU case, so I'm not sure it's worth what they're charging for it.
Does anyone have suggestions on a S10e case that is Fabric?
I have never had a fabric case but I thought I'd try one out. I can't find any except some really cheap looking Chinese knockoff things.
Anyone got any suggestions?
---------- Post added at 09:03 PM ---------- Previous post was at 09:03 PM ----------
vonDubenshire said:
Does anyone have suggestions on a S10e case that is Fabric?
I have never had a fabric case but I thought I'd try one out. I can't find any except some really cheap looking Chinese knockoff things.
Anyone got any suggestions?
Click to expand...
Click to collapse
I've bought this on Aliexpress /item/Original-Samsung-Galaxy-S10-Plus-Canvas-Leather-Case-Cloth-Fabric-Finish-Back-Protective-Cover-For-Samsung/32985661092.html?spm=a2g0s.9042311.0.0.27424c4dAMGX9N
(Put aliexpress . com first)
Good quality, very soft, recommended.
But my personal (and the best) choice are the frosted shield from Nillkin cases.
Ressistant, VERY slim, good look, good grip and texture.
vonDubenshire said:
Does anyone have suggestions on a S10e case that is Fabric?
I have never had a fabric case but I thought I'd try one out. I can't find any except some really cheap looking Chinese knockoff things.
Anyone got any suggestions?
Click to expand...
Click to collapse
Check out MOFI brand case.
It has a soft fabric backing. I got it off Amazon about 15buck.
For those looking for a slim case, check out the Korean brand $10 Araree A Fit cases. The deep blue color is nice and fits the bill for me. They also have the Typoskin model available directly (but shipping is prohibitive). I am waiting for the $20 Araree Typoskin from a Korean eBay seller.
Why the A Fit or Typoskin? I wanted a low profile, business casual look (but not black so it's easy to spot in the dark), protective and not a fingerprint magnet. I used Diztronic for my S7 (which survived many drops on concrete!). I have accidentally dropped the S10e in the Araree A Fit a few times. The blue A Fit has good fingerprint resistance (the clear one might be different). It stays relatively clean all day, except during times when my hands are very sweaty.
Disclaimer: I have gone through (and returned) DOZENS of S10e cases from Amazon. We're a family of 4 with different cases ranging from $10 to $40: the Araree A Fit deep blue on a Prism Blue S10e, the Incipio NGP clear on a Flamingo Pink S10e, the Caseology Parallax black on a Prism Blue S10e and the Gear4 Piccadilly clear/white on a white S10e. I've tried all kind of cases from Spigen, Incipio, Encased, Pelican, Under Armour, Bodyguardz and various other lesser known brands.
---------- Post added at 17:19 ---------- Previous post was at 17:02 ----------
jasons1004 said:
Check out MOFI brand case.
It has a soft fabric backing. I got it off Amazon about 15buck.
Click to expand...
Click to collapse
I agree, it's a good case and I've tried two different Mofi cases. IMO, the lip rim around the front is a bit too soft/flimsy and not as tout/firm as I had found in other low profile cases (less firm, meaning, it may be less protective in case of drops).
lost_ said:
For those looking for a slim case, check out the Korean brand $10 Araree A Fit cases.
Click to expand...
Click to collapse
At least from the renders on the Amazon listing, this is probably the best looking for the price, Spigen's Silicone Fit being a close second. Super interested in this case and don't see anything online so some photos of it would be great
lost_ said:
I agree, it's a good case and I've tried two different Mofi cases. IMO, the lip rim around the front is a bit too soft/flimsy and not as tout/firm as I had found in other low profile cases (less firm, meaning, it may be less protective in case of drops).
Click to expand...
Click to collapse
Yeah there is no lip with glass protector at all with the MOFI. I have the MOFI, Blue speck, Spigen liquid air and xdoria defense (has a channel so the bottom speaker sound routes to the front instead of bottom)
The speck case is my favorite for the grippy lines it has and it has the biggest lip but the xdoria is nice for the sound routing feature.
I got ringke fusion smoked boarders, from their ebay seller handle, cheaper than amazon
Sent from my SM-G970F using Tapatalk
d14gvn said:
---------- Post added at 09:03 PM ---------- Previous post was at 09:03 PM ----------
I've bought this on Aliexpress /item/Original-Samsung-Galaxy-S10-Plus-Canvas-Leather-Case-Cloth-Fabric-Finish-Back-Protective-Cover-For-Samsung/32985661092.html?spm=a2g0s.9042311.0.0.27424c4dAMGX9N
(Put aliexpress . com first)
Good quality, very soft, recommended.
But my personal (and the best) choice are the frosted shield from Nillkin cases.
Ressistant, VERY slim, good look, good grip and texture.
Click to expand...
Click to collapse
I'm gonna get some of these cheap ones on Ali.
That one looks ok!
Sent from my Samsung SM-G970U using XDA Labs
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
jasons1004 said:
Check out MOFI brand case.
It has a soft fabric backing. I got it off Amazon about 15buck.
Click to expand...
Click to collapse
I want one but I don't like the look of the silicone on the edges!
I'm going for soft all the way without regular tpu or silicone touching my hand (for fun)
Sent from my Samsung SM-G970U using XDA Labs
vonDubenshire said:
I'm gonna get some of these cheap ones on Ali.
That one looks ok!
Sent from my Samsung SM-G970U using XDA Labs
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
I want one but I don't like the look of the silicone on the edges!
I'm going for soft all the way without regular tpu or silicone touching my hand (for fun)
Sent from my Samsung SM-G970U using XDA Labs
Click to expand...
Click to collapse
Yeah I ended up returning the mofi bc there is no lip with a glass protector. The tpu on the edges is nice tho for grip mainly. I doubt there is a fabric that covers edges too.
jasons1004 said:
Yeah I ended up returning the mofi bc there is no lip with a glass protector. The tpu on the edges is nice tho for grip mainly. I doubt there is a fabric that covers edges too.
Click to expand...
Click to collapse
there's a few on aliexpress
i've never purchased from there so i'm just gonna find the ones i judge to be best and least likely to be bad purchases (they're all fairly cheap tho) and then see what happens