Develop Bugs

Protective Rubber Gel Back Case for Galaxy Note

Hi All
So the hunt for a good Protective Rubber Gel Back Case for Note begins... similar to this one would be great!!
http://www.dealextreme.com/p/protec...one-back-case-for-i9100-galaxy-s2-black-70754
The minute I find one I'll buy it... I actually prefer getting the case even before I buy the Note.
Brgds... /Tubgirl

I'm with you, this phone is too expensive to damage. I've been searching everyday and have yet to find anything. I usually prefer Ballistics' cases but I doubt they will be making one for this phone so it's back to the drawing board. I'm also wondering if zagg will be making a screen protector for this device. Don't know what I can expect with such a massive device. Maybe turn to the manufacturers of the best tablet cases... I'll post here when I find some cases.

iLiberate said:
I'm with you, this phone is too expensive to damage. I've been searching everyday and have yet to find anything. I usually prefer Ballistics' cases but I doubt they will be making one for this phone so it's back to the drawing board. I'm also wondering if zagg will be making a screen protector for this device. Don't know what I can expect with such a massive device. Maybe turn to the manufacturers of the best tablet cases... I'll post here when I find some cases.
Click to expand...
Click to collapse
I facebooked Both Ballistic and Otterbox and they both say they don't have any plans for a case.
I'd hate to use my Note without a really good case. Maby i'll make one out of wood...

blobotorian said:
I facebooked Both Ballistic and Otterbox and they both say they don't have any plans for a case.
I'd hate to use my Note without a really good case. Maby i'll make one out of wood...
Click to expand...
Click to collapse
I'm liking the little brown case that just has a front flat that opens up like a book but it's not protective at all lol

Me too but I can't find a link to buy it yet. Expansys has blue and white...... Yuck..
Sent from my GT-P1000 using Tapatalk

I think the case of expansys is sleek. It's not making the note any thicker.
Hope they got variety of colors though..

samsung flipover
Samsung will come with a flipover, the back of the flipover will replace the original back of the note. So the note will only become a few mm thicker

I'm also looking to get the Samsung flipover cover when it becomes available. The only problem is the side of the Note remains unprotected, I'm thinking getting a gel case and trim off the left hand side so it will fit togther with the flipover cover.

Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.

deliriousbb said:
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
Click to expand...
Click to collapse
How does the screen protector feel? I know the Skinomi's tablet protector feels rubbery.

deliriousbb said:
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
Click to expand...
Click to collapse
The carbon fibre film must just be 3m di-noc carbon fibre, can be had much cheaper on Ebay and you can just custom cut it to any device.
I wont be sludging up my screen with a screen protector

RMXO said:
How does the screen protector feel? I know the Skinomi's tablet protector feels rubbery.
Click to expand...
Click to collapse
I used the Carbon Fiber skin on my Streak and loved it .. I will order one for my Note.

Tubgirl said:
Hi All
So the hunt for a good Protective Rubber Gel Back Case for Note begins... similar to this one would be great!!
http://www.dealextreme.com/p/protec...one-back-case-for-i9100-galaxy-s2-black-70754
The minute I find one I'll buy it... I actually prefer getting the case even before I buy the Note.
Brgds... /Tubgirl
Click to expand...
Click to collapse
yup....looking for the same but no luck.
The flip cover is not practical IMHO esp when making calls.

I always used to get hard crystal clear cases such as
http://www.ebay.co.uk/itm/Clear-Cry..._MobilePhonesCasesPouches&hash=item3f0fa5fde0
for my phones.
But lately ive really liked the TPU gel case with stand, such as:
http://www.ebay.co.uk/itm/BLACK-TPU...204593?pt=PDA_Accessories&hash=item3f0db99071
Which is just like the case in the OP really
The stand is surprisingly useful!
---------- Post added at 10:32 PM ---------- Previous post was at 10:28 PM ----------
http://www.clove.co.uk/samsung-galaxy-note-official-flip-cover-case-black
is the only case i can find at the moment

Everyone who doesn't need the case right away, wait til piel frama comes out with a imagnum type of case. This case is expensive but it protects your device against any earthquake you throw at it. I have one for my hd2 and getting one for the note cause my hd2 is still like new. You can put in your e-mail and they'll let you know when it's there to buy. Here's the link
http://www.pielframa.com/samsung-galaxy-note-cases.htm
Cheers
Sent from my HTC HD2 using XDA App

MassoltoV said:
Everyone who doesn't need the case right away, wait til piel frama comes out with a imagnum type of case. This case is expensive but it protects your device against any earthquake you throw at it. I have one for my hd2 and getting one for the note cause my hd2 is still like new. You can put in your e-mail and they'll let you know when it's there to buy. Here's the link
Cheers
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
If they release a case like this for the Note I think it might be worth a try. The kickstand could be useful.
w w w.pielframa. c o m/ apple-iphone-4s-cases-imagnum2.htm

drhoades01 said:
If they release a case like this for the Note I think it might be worth a try. The kickstand could be useful.
w w w.pielframa. c o m/ apple-iphone-4s-cases-imagnum2.htm
Click to expand...
Click to collapse
You're so right! This type i would use fore use @ home and the solid closed imagnum case for outside
Sent from my HTC HD2 using XDA App

Guys do you think a leather/cloth Pouch Pull case would be good enough?
E.g: I though I had more posts here. Anw can't post complete link. The below works tho.
images.esellerpro.com/2209/I/334/07/Samsung%20Galaxy%20S%202%20Black%20Leather%20Pouch%20Open.jpg
I hate any other cases. Screen protector will be fitted of course.

Just found these. I am about to order one right now...
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001331&products_id=33857

zenbbqmaster said:
Just found these. I am about to order one right now...
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001331&products_id=33857
Click to expand...
Click to collapse
I'm considering this one as well. Please post your thoughts when you receive it.

The Diztronic TPU case now available

Finally. An amazing TPU case without the cheesy back design.
http://tpu-cases.com/index.php?main_page=index&cPath=42_68
Amazon link

Lol whats so amazing about them
Sent from my MB860 using XDA

The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.

LLStarks said:
The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.
Click to expand...
Click to collapse
Yes, its just a very solid tpu case.
Sent from my SAMSUNG-SGH-I717 using xda premium

Wond3r said:
Lol whats so amazing about them
Sent from my MB860 using XDA
Click to expand...
Click to collapse
The quality of the plastic is superior. Once I bought one for my Galaxy Nexus I've got one for every phone since then. They are the best TPU brand for phones.
You won't regret it. It's cheap too!

My SII Skyrocket Diztronic case ended up being my favorite of the various cases I tried.
Not at all flashy. Nothing special about it.
It just "works" properly. And doesn't get beat up like cheaper cases do.
And I like that they are finally doing cutouts for BOTH the volume & power unlike on my last case.
I hate anything covering the power or volume buttons. Though some folks do like that.

I've used these cases for 2 years on Captivate, Infuse, Galaxy Nexus and Note. They're grippy, durable and fit perfectly. I just ordered one for my S3. Thanks for the heads-up.

I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?

I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.

jfenton57 said:
I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.
Click to expand...
Click to collapse
Damn you. I bought a Diztronic Matte Black.

komugi said:
Damn you. I bought a Diztronic Matte Black.
Click to expand...
Click to collapse
Matte Black is a the best color imho
Sent from my SAMSUNG-SGH-I717 using xda premium

komugi said:
I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?
Click to expand...
Click to collapse
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol

Sorry for the delay in getting our S III cases up guys, I was out of town and had an employee put them up. Unfortunately she accidentally set the start selling date as July 6th so the pages never went live. I said didn't you realize we weren't getting any orders?! We sent inventory to Amazon on Friday so Prime shipping options should be available either Tuesday or Wednesday.
We did include a screen protector with this release made of Japanese film. When we first started including screen protectors we were using a Korean film, which is slightly better than Chinese but still had some rainbowing and purpling. These Japanese based ones are great, very good clarity. Even though including them almost doubles our costs we've kept our prices the same for the time being. Thanks everyone for your continued support!
Sent from my SPH-D710 using xda premium

Just got the matte-clear case! Looking forward to getting it in the mail

OneStepAhead, does the screen protector cover the entire front and have cut-outs?

Wond3r said:
Lol whats so amazing about them
Click to expand...
Click to collapse
The company resides and manufactures in America (Madison, WI, near me!!). The customer service is absolutely OUTSTANDING. You basically end up talking to a real person who is dead set on making sure you're satisfied.
And TPU, in general, is perfect for me. Thin, adds a little grip but doesn't stick in pockets.

vince1234 said:
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol
Click to expand...
Click to collapse
cldn't agree more, they are indeed bad. Just ordered Diztronic for my S III . Loved it on my Nexus , was waiting for a week for it to be available in the meanwhile i thought i would try cruzerlite . Apart from the fit, i dint like the looks of it too, esp that i wanted something with a plain back matte finish . Diztronic was the perfect fit . Love it Love it!!!

Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)

jfenton57 said:
Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)
Click to expand...
Click to collapse
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
LLStarks said:
OneStepAhead, does the screen protector cover the entire front and have cut-outs?
Click to expand...
Click to collapse
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.

OneStepAhead said:
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.
Click to expand...
Click to collapse
Great response. Its great to have good interraction with the manufacture and the end user. That makes for the best experience in both parties. Thank you.

Anything similliar to the official Nexus 4 bumper?

Hey,
is there any decent, slim, non-aluminium, perfect fit, bumper for SGS3? Like this one for Nexus 4 - http://www.youtube.com/watch?v=lvuFn_fbUBo
I'm hoping for camera/screen protection when my phone is on the table + some drop protection, without adding any bulk.
I couldn't find anything decent. The only interesting case I found was the Rock Quicksand Cover, but it thickens the phone a little and it cracks easily. Non-glossy and non-slippery battery cover with camera protection could work too, but couldn't find any aswell

Crunozaur said:
Hey,
is there any decent, slim, non-aluminium, perfect fit, bumper for SGS3? Like this one for Nexus 4 - http://www.youtube.com/watch?v=lvuFn_fbUBo
I'm hoping for camera/screen protection when my phone is on the table + some drop protection, without adding any bulk.
I couldn't find anything decent. The only interesting case I found was the Rock Quicksand Cover, but it thickens the phone a little and it cracks easily. Non-glossy and non-slippery battery cover with camera protection could work too, but couldn't find any aswell
Click to expand...
Click to collapse
There's one similar on Amazon.
---------- Post added at 04:02 AM ---------- Previous post was at 03:33 AM ----------
http://www.amazon.com/Fosmon-Hybrid...d=1355281248&sr=8-1&keywords=galaxy+s3+bumper

Crunozaur said:
Hey,
is there any decent, slim, non-aluminium, perfect fit, bumper for SGS3? Like this one for Nexus 4 - http://www.youtube.com/watch?v=lvuFn_fbUBo
I'm hoping for camera/screen protection when my phone is on the table + some drop protection, without adding any bulk.
I couldn't find anything decent. The only interesting case I found was the Rock Quicksand Cover, but it thickens the phone a little and it cracks easily. Non-glossy and non-slippery battery cover with camera protection could work too, but couldn't find any aswell
Click to expand...
Click to collapse
SGP makes the ultra bumper series that appears to be good quality (review: http://forum.xda-developers.com/showthread.php?t=1918150&highlight=sgp) but apparently they think that only the iphone owners like dark and sober colors.. as for the galaxy s3 they only make them in white or bright colors..

silkshocker said:
There's one similar on Amazon.
---------- Post added at 04:02 AM ---------- Previous post was at 03:33 AM ----------
http://www.amazon.com/Fosmon-Hybrid...d=1355281248&sr=8-1&keywords=galaxy+s3+bumper
Click to expand...
Click to collapse
I own that case and it is the best TPU case I HAVE OWNED. Its a matte finish on the bumper side, soft at the buttons but not flimsy that'll make them activate on their own. The back is frosted but you can still see through and see your back cover.
Back part is my only concern because it looks like it can shatter but it doesn't. I have dropped it several time from my truck, and my truck is lifted.
I never hype cases, but when I opened the packaging for this thing I was WTF because its stuff but flexes a little. Snapped it on and damn my phone is a sexy beach!!!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Sent from my GT-I9300 using xda premium

Jammol said:
I own that case and it is the best TPU case I HAVE OWNED. Its a matte finish on the bumper side, soft at the buttons but not flimsy that'll make them activate on their own. The back is frosted but you can still see through and see your back cover.
Back part is my only concern because it looks like it can shatter but it doesn't. I have dropped it several time from my truck, and my truck is lifted.
I never hype cases, but when I opened the packaging for this thing I was WTF because its stuff but flexes a little. Snapped it on and damn my phone is a sexy beach!!!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
just ordered it today after seeing a youtube video!
personally i find the blue trim around my pebble blue s3 a little ugly, but love the back cover. finally found a case that both covers trim and shows the back!
just over $7 with 3 screen protectors

Couple of cases I've pruchased - my impressions of them

I bought these full price from Amazon since right now there are no case deals yet that I've seen.
Mustaner smooth hard minimal case
https://www.amazon.com/gp/product/B01KPEMZZS
I gave it a 3 star review - it definitely is smooth, but to the point it feels like it is going to slide right out of your hand. Also, camera cutout does not have a lip and the sensor sticks out slightly even with the case.
Ringke onyx case
https://www.amazon.com/gp/product/B01K5I9CB4
This is the one I'm going to be running as my daily driver. Defintiely offers some good protection all around. The sides are textured and offer a nice grip to it. I'm giving it a 5 star because all around it is an awesome case. Adds a little bulk but nothing terrible that detracts from the phone.
I just wish there was a minimalistic case that had some slight texture and protected the camera.

Im stuck between ... https://www.amazon.com/Spigen-Rugge...&keywords=lg+v20+case&refinements=p_89:Spigen or https://www.amazon.com/VRS-Brushed-...words=lg+v20+case&refinements=p_89:VRS+DESIGN ... I know the Spigen is less bulkier ... But the VRS looks nice

I got this one...arriving today I'll reply with feedback. I had one for Note 4 that fit license and one credit card...Got used to not carrying wallet.
https://www.amazon.com/gp/product/B01M0EBEXZ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I did a quick look at wallet case for the V20 .. there was only one model ahaha... until I find a full coverage case like otterbox/lifeproof I will stick to that. I doubt that my phone holster i got for the note 7 will work on with it though =/ It was design for the ip7 and the note 7 was slightly smaller so I knew that fit but v20 is bigger. Without the case I know it fit... with it ... errr >.>

Drey070 said:
Im stuck between ... https://www.amazon.com/Spigen-Rugge...&keywords=lg+v20+case&refinements=p_89:Spigen or https://www.amazon.com/VRS-Brushed-...words=lg+v20+case&refinements=p_89:VRS+DESIGN ... I know the Spigen is less bulkier ... But the VRS looks nice
Click to expand...
Click to collapse
I ordered the VRS and honestly it looks less bulkier then anything I have seen. It's a hard case not tpu so that's nice

this one adds some width...but definitely what I want.....
https://www.amazon.com/Wallet-Vena-...8&qid=1477076493&sr=1-22&keywords=lg+v20+case

Obliq Flex Pro
I purchased this one https://www.myphonecase.com/collections/lg-v20/products/obliq-flex-pro-lg-v20-case-black
On the Obliq site its sold out.
19.99 with 10% coupon code total $17.96
used coupon code Limited time 10% off code: MPC10

I'm looking for the most minimalist case possible that will provide basically scratch protection...not really looking for one that is designed for "drop" protection.
Reason for the thinner case is due to my car holder clip which barely is able to keep my previous V10 without a case stable.
I was considering this one...https://www.amazon.com/dp/B01LQV7VCQ/ref=psdc_3081461011_t2_B01M0HW9P4
Thoughts?

dragion said:
I'm looking for the most minimalist case possible that will provide basically scratch protection...not really looking for one that is designed for "drop" protection.
Reason for the thinner case is due to my car holder clip which barely is able to keep my previous V10 without a case stable.
I was considering this one...https://www.amazon.com/dp/B01LQV7VCQ/ref=psdc_3081461011_t2_B01M0HW9P4
Thoughts?
Click to expand...
Click to collapse
Do you like skins like dbrand?

dwertz said:
Do you like skins like dbrand?
Click to expand...
Click to collapse
I was also looking at skins (dbrand)...but a TPU case seems to be the cheaper alternative.
---------- Post added at 04:41 PM ---------- Previous post was at 04:30 PM ----------
Here's a "cheaper" one...comparison to the Spigen?
https://www.amazon.com/LG-V20-Skmy-...coding=UTF8&psc=1&refRID=P9XGTBDJ1C60ZSS01YM4
There is several that "looks" the same, but is it worth going with the Spigen?

I have the spigen crystal on as I type this. Clean and minimalistic. Offers a raised lip around the display, and offers a raised lip around the camera bump. Solid non-slipping gripability on back and sides. A little too shiny and floppy around the edges though. A good basic protector.
Sent from a TMo V20

Just ordered the Spigen Liquid Crystal Case along with a set of Anker USB-C to Micro USB Adapters via Amazon Prime...should receive them this Tuesday.

dragion said:
I was also looking at skins (dbrand)...but a TPU case seems to be the cheaper alternative.
---------- Post added at 04:41 PM ---------- Previous post was at 04:30 PM ----------
Here's a "cheaper" one...comparison to the Spigen?
https://www.amazon.com/LG-V20-Skmy-...coding=UTF8&psc=1&refRID=P9XGTBDJ1C60ZSS01YM4
There is several that "looks" the same, but is it worth going with the Spigen?
Click to expand...
Click to collapse
I just received that case today and is made out a thick material.I buy the same kind of case for all my phone and this one is thickest one yet.

techrider6262 said:
I just received that case today and is made out a thick material.I buy the same kind of case for all my phone and this one is thickest one yet.
Click to expand...
Click to collapse
Is that bad or good?

dragion said:
Is that bad or good?
Click to expand...
Click to collapse
Better protection than the ones that i've bought before and it also has a raised lip around screen.

techrider6262 said:
Better protection than the ones that i've bought before and it also has a raised lip around screen.
Click to expand...
Click to collapse
Perfect! :good:
Exactly what I was looking for.

nest75068 said:
I bought these full price from Amazon since right now there are no case deals yet that I've seen.
Mustaner smooth hard minimal case
https://www.amazon.com/gp/product/B01KPEMZZS
I gave it a 3 star review - it definitely is smooth, but to the point it feels like it is going to slide right out of your hand. Also, camera cutout does not have a lip and the sensor sticks out slightly even with the case.
Ringke onyx case
https://www.amazon.com/gp/product/B01K5I9CB4
This is the one I'm going to be running as my daily driver. Defintiely offers some good protection all around. The sides are textured and offer a nice grip to it. I'm giving it a 5 star because all around it is an awesome case. Adds a little bulk but nothing terrible that detracts from the phone.
I just wish there was a minimalistic case that had some slight texture and protected the camera.
Click to expand...
Click to collapse
I have the onyx case as well. I'm liking it. The carbon fiber looks good too. Currently waiting for another one i ordered.
Sent from my LG-H918 using Tapatalk

Where the hell are the ringke or spigen slim hard cases I always buy?

Is it just me or does the case selection kind of suck so far on this phone? I know it's not even the official release date yet but hopefully the case selection will get better.
Sent from my VS995 using Tapatalk

My go to case manufacturer has gauged not enough interest in this phone so Diztronic will not be making a TPU case or any case for it unfortunately.

Galaxy S10E Case

A case I had back on the S7 they are making for the S10e is
https://www.amazon.com/gp/product/B07MQRVRGG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I love that the case is a slim case with a stand so I can watch movies and it easly slide into the hoster and you can rotate the holster 90 as I like it in landscape.
Just though I would share it.

I had a Samsung case included, feels like rubbery plastic I don't like it at all, this has to be awarded as the slipperiest case in the world. Already ordered a Supcase I'll post pictures once it arrives

This one
Ringke Fusion-X Designed for Galaxy S10e (5.8") Case
I have it and love it. Reminds me of UAG case without the price. It's like 12 bucks in Amazon

Samsung Pattern Cover Cases
They come with the international versions free in the box. They have holes all over them, sell them from Samsung Store in Ireland. Seems they won't ship to the USA. Anyone know where I can buy a couple ??
Thank You very much,
Vinny
Sent from my SM-G970U using Tapatalk

I heart my Ringke Fusion case for my s10e!

Clayter21 said:
This one
Ringke Fusion-X Designed for Galaxy S10e (5.8") Case
I have it and love it. Reminds me of UAG case without the price. It's like 12 bucks in Amazon
Click to expand...
Click to collapse
i found $3.39 on ebay. at first i wanted to try it but then changed my mind. not crazy about X design. I like more plain clear good quality tpu style or 2 layer hybrid. bought a different one for a around the same price with a ring holder. also has holes for a wrist strap.

I ordered spigen tough armor and I like it.
Sent from my SM-G970F using Tapatalk

Good starter case https://www.amazon.com/gp/product/B07MCVW825/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Until I saw this one https://www.tech21.com/en_us/evo-check-samsung-galaxy-s10e

Simple and effective https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/352616304209

slamor said:
Good starter case https://www.amazon.com/gp/product/B07MCVW825/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Until I saw this one https://www.tech21.com/en_us/evo-check-samsung-galaxy-s10e
Click to expand...
Click to collapse
I got the tech21 in smokey black at Verizon when I got the phone. Nothing super special, just a semi-transparent TPU case. Does its job well and looks nice on my blue S10e, but it's just a TPU case, so I'm not sure it's worth what they're charging for it.

Does anyone have suggestions on a S10e case that is Fabric?
I have never had a fabric case but I thought I'd try one out. I can't find any except some really cheap looking Chinese knockoff things.
Anyone got any suggestions?

---------- Post added at 09:03 PM ---------- Previous post was at 09:03 PM ----------
vonDubenshire said:
Does anyone have suggestions on a S10e case that is Fabric?
I have never had a fabric case but I thought I'd try one out. I can't find any except some really cheap looking Chinese knockoff things.
Anyone got any suggestions?
Click to expand...
Click to collapse
I've bought this on Aliexpress /item/Original-Samsung-Galaxy-S10-Plus-Canvas-Leather-Case-Cloth-Fabric-Finish-Back-Protective-Cover-For-Samsung/32985661092.html?spm=a2g0s.9042311.0.0.27424c4dAMGX9N
(Put aliexpress . com first)
Good quality, very soft, recommended.
But my personal (and the best) choice are the frosted shield from Nillkin cases.
Ressistant, VERY slim, good look, good grip and texture.

vonDubenshire said:
Does anyone have suggestions on a S10e case that is Fabric?
I have never had a fabric case but I thought I'd try one out. I can't find any except some really cheap looking Chinese knockoff things.
Anyone got any suggestions?
Click to expand...
Click to collapse
Check out MOFI brand case.
It has a soft fabric backing. I got it off Amazon about 15buck.

For those looking for a slim case, check out the Korean brand $10 Araree A Fit cases. The deep blue color is nice and fits the bill for me. They also have the Typoskin model available directly (but shipping is prohibitive). I am waiting for the $20 Araree Typoskin from a Korean eBay seller.
Why the A Fit or Typoskin? I wanted a low profile, business casual look (but not black so it's easy to spot in the dark), protective and not a fingerprint magnet. I used Diztronic for my S7 (which survived many drops on concrete!). I have accidentally dropped the S10e in the Araree A Fit a few times. The blue A Fit has good fingerprint resistance (the clear one might be different). It stays relatively clean all day, except during times when my hands are very sweaty.
Disclaimer: I have gone through (and returned) DOZENS of S10e cases from Amazon. We're a family of 4 with different cases ranging from $10 to $40: the Araree A Fit deep blue on a Prism Blue S10e, the Incipio NGP clear on a Flamingo Pink S10e, the Caseology Parallax black on a Prism Blue S10e and the Gear4 Piccadilly clear/white on a white S10e. I've tried all kind of cases from Spigen, Incipio, Encased, Pelican, Under Armour, Bodyguardz and various other lesser known brands.
---------- Post added at 17:19 ---------- Previous post was at 17:02 ----------
jasons1004 said:
Check out MOFI brand case.
It has a soft fabric backing. I got it off Amazon about 15buck.
Click to expand...
Click to collapse
I agree, it's a good case and I've tried two different Mofi cases. IMO, the lip rim around the front is a bit too soft/flimsy and not as tout/firm as I had found in other low profile cases (less firm, meaning, it may be less protective in case of drops).

lost_ said:
For those looking for a slim case, check out the Korean brand $10 Araree A Fit cases.
Click to expand...
Click to collapse
At least from the renders on the Amazon listing, this is probably the best looking for the price, Spigen's Silicone Fit being a close second. Super interested in this case and don't see anything online so some photos of it would be great

lost_ said:
I agree, it's a good case and I've tried two different Mofi cases. IMO, the lip rim around the front is a bit too soft/flimsy and not as tout/firm as I had found in other low profile cases (less firm, meaning, it may be less protective in case of drops).
Click to expand...
Click to collapse
Yeah there is no lip with glass protector at all with the MOFI. I have the MOFI, Blue speck, Spigen liquid air and xdoria defense (has a channel so the bottom speaker sound routes to the front instead of bottom)
The speck case is my favorite for the grippy lines it has and it has the biggest lip but the xdoria is nice for the sound routing feature.

I got ringke fusion smoked boarders, from their ebay seller handle, cheaper than amazon
Sent from my SM-G970F using Tapatalk

d14gvn said:
---------- Post added at 09:03 PM ---------- Previous post was at 09:03 PM ----------
I've bought this on Aliexpress /item/Original-Samsung-Galaxy-S10-Plus-Canvas-Leather-Case-Cloth-Fabric-Finish-Back-Protective-Cover-For-Samsung/32985661092.html?spm=a2g0s.9042311.0.0.27424c4dAMGX9N
(Put aliexpress . com first)
Good quality, very soft, recommended.
But my personal (and the best) choice are the frosted shield from Nillkin cases.
Ressistant, VERY slim, good look, good grip and texture.
Click to expand...
Click to collapse
I'm gonna get some of these cheap ones on Ali.
That one looks ok!
Sent from my Samsung SM-G970U using XDA Labs
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
jasons1004 said:
Check out MOFI brand case.
It has a soft fabric backing. I got it off Amazon about 15buck.
Click to expand...
Click to collapse
I want one but I don't like the look of the silicone on the edges!
I'm going for soft all the way without regular tpu or silicone touching my hand (for fun)
Sent from my Samsung SM-G970U using XDA Labs

vonDubenshire said:
I'm gonna get some of these cheap ones on Ali.
That one looks ok!
Sent from my Samsung SM-G970U using XDA Labs
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
I want one but I don't like the look of the silicone on the edges!
I'm going for soft all the way without regular tpu or silicone touching my hand (for fun)
Sent from my Samsung SM-G970U using XDA Labs
Click to expand...
Click to collapse
Yeah I ended up returning the mofi bc there is no lip with a glass protector. The tpu on the edges is nice tho for grip mainly. I doubt there is a fabric that covers edges too.

jasons1004 said:
Yeah I ended up returning the mofi bc there is no lip with a glass protector. The tpu on the edges is nice tho for grip mainly. I doubt there is a fabric that covers edges too.
Click to expand...
Click to collapse
there's a few on aliexpress
i've never purchased from there so i'm just gonna find the ones i judge to be best and least likely to be bad purchases (they're all fairly cheap tho) and then see what happens