Cant Boot CM 13 after the installation - ZenFone 2 Q&A, Help & Troubleshooting

Dear all friends,
I need help! I just tried to flash CM 13 from twrp 2.8.7.0. The log said succeed but i wont boot to CM 13 after rebooted. when i tried to flash TWRP 3.0.0.0 it cant be installed. It back to fastboot menu. Please your advice.
Thanks

ei_frans said:
Dear all friends,
I need help! I just tried to flash CM 13 from twrp 2.8.7.0. The log said succeed but i wont boot to CM 13 after rebooted. when i tried to flash TWRP 3.0.0.0 it cant be installed. It back to fastboot menu. Please your advice.
Thanks
Click to expand...
Click to collapse
Which cm13 did you download? The official nightlies, or the MM blob based one from Jrior001's website?
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Which cm13 did you download? The official nightlies, or the MM blob based one from Jrior001's website?
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Hai friend,
I'd download from The official nightlies.
Thanks

First thing I would try is to re-download the Rom. And try to install it again. Just to make sure it wasn't a corrupted dl.
Sent from my ASUS_Z00AD using Tapatalk

Related

Phone keeps on restarting after CM 12.1 update

I have been using CM 12.1 for months and I had no problems until now. I didn't update CM 12.1 for a long time, my mistake, but I downloaded the latest update today and installed it. The problem is that the phone won't boot. It restarts after the CM logo every time. I tried flashing the update again using the twrp but the problem still lies. What should I do?
Maybe the modem driver. I had to flash an additional zip file other than the ROM on latest Resurrection remix 5.5.x.
Inviato dal mio HM 1SW utilizzando Tapatalk
david_reigh said:
I have been using CM 12.1 for months and I had no problems until now. I didn't update CM 12.1 for a long time, my mistake, but I downloaded the latest update today and installed it. The problem is that the phone won't boot. It restarts after the CM logo every time. I tried flashing the update again using the twrp but the problem still lies. What should I do?
Click to expand...
Click to collapse
I've had this problem too.
The way i fixed it was like this :
1. Flashed MIUI 7
2. wiped everything [data/cache/dalvik-cache]
3. flashed CM12.1
and i got it booted like that
you can try flashing this kitkat bootloader or you can say modem files. it has been taken from MIUI v7 https://www.androidfilehost.com/?fid=24052804347850305 and then try to clean dalvik cache after you flashing it or do any update, I might recommend using Mokee 5.1.1 for CM12.1 in R1S it is smooth and has more features
as its already mentioned on the OP, u have flash the firmware also when coming from old source build.
If u have a SD card, try removing it and then use ur phone.
Sent from my HM 1SW using Tapatalk
david_reigh said:
I have been using CM 12.1 for months and I had no problems until now. I didn't update CM 12.1 for a long time, my mistake, but I downloaded the latest update today and installed it. The problem is that the phone won't boot. It restarts after the CM logo every time. I tried flashing the update again using the twrp but the problem still lies. What should I do?
Click to expand...
Click to collapse
onano said:
I've had this problem too.
The way i fixed it was like this :
1. Flashed MIUI 7
2. wiped everything [data/cache/dalvik-cache]
3. flashed CM12.1
and i got it booted like that
Click to expand...
Click to collapse
ive tried ur way but not working pls help
i am facing the same problem now. what to do??
deepakmaini said:
i am facing the same problem now. what to do??
Click to expand...
Click to collapse
have u tried whats is in #4 ??

Gapps not working on CM13 - keep force closing

Hi all,
I am installing CM13 on a Samsung Galaxy S4 Mini LTE serranoltexx and I have an issue with Gapps.
The ROM installs fine but once I install Gapps I get a forced closed messages. I checked a few guides and they suggested that this was due to the application permissions on CM13 but when I check these they appear to be fine.
Under the application menu I can see that the apps which Gapps installs are grayed out, almost like they are installed on the SD card but the SD card is missing! I have tried a number of times to delete cache but no luck.
I am using opengapps. I just tried using CM12 with open gapps but I get the same exact issue, therefore I think this is an issue with Gapps.
Can anybody offer any advise on how to get this working?
Thanks,
c
You can try different gapps (pico, micro ...) or recovery. I'm using cwm recovery
GT-I9190 cihazımdan Tapatalk kullanılarak gönderildi
umuturunc said:
You can try different gapps (pico, micro ...) or recovery. I'm using cwm recovery
GT-I9190 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
I tried different Gapps packages but not different recovery. I am using TWRP, do you have a link to the CWM which you are using?
ceanth said:
I tried different Gapps packages but not different recovery. I am using TWRP, do you have a link to the CWM which you are using?
Click to expand...
Click to collapse
I'm using latest version(6.0.5.1) of cwm on my serrano3g.
Here is a thread for your serranoltex device. http://forum.xda-developers.com/showthread.php?t=2364980
Sorry for my bad english.
umuturunc said:
I'm using latest version(6.0.5.1) of cwm on my serrano3g.
Here is a thread for your serranoltex device. http://forum.xda-developers.com/showthread.php?t=2364980
Sorry for my bad english.
Click to expand...
Click to collapse
Hi,
After flashing CWM Gapps worked! I now have an issue where by if I try and update Cyanogenmod via the Cyanogenmod updates, the device reboots into recovery however it doesn't flash the update, recovery fails.
Can you advise which recovery I would need to install to be compatible with using OTA Cyanogenmod updates?
You can also flash updates manually. Don't need to outoflash ��
But if you want to OTA update you should use cyanogen recovery. https://download.cyanogenmod.org/?device=serranoltexx
You can see cyanogenmod recovery right of the cyanogenmod build.
GT-I9190 cihazımdan Tapatalk kullanılarak gönderildi
umuturunc said:
You can also flash updates manually. Don't need to outoflash ��
But if you want to OTA update you should use cyanogen recovery. https://download.cyanogenmod.org/?device=serranoltexx
You can see cyanogenmod recovery right of the cyanogenmod build.
GT-I9190 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
The solution work?
Here's what worked for me.
First of all, I'm using TWRP 2.8. The root tutorial I followed gave me CWM so I switched my self. After that I tried installing gapps and I ran into the setup wizard and google app force closures. What seemed to have worked for me was to flash the ROM again which I downloaded through CM updates (it goes to the folder 'cmupdater' in your internal storage), boot, enable dev options, turn on advanced power menu, reboot to recovery through powr menu, install gapps micro and then reboot WITHOUT wiping dalvik/cache. I hope this helps some of you guys as it is what worked for me. It's sounds like alot but its the exact steps I followed.
---------- Post added at 10:45 PM ---------- Previous post was at 10:40 PM ----------
ceanth said:
Hi,
After flashing CWM Gapps worked! I now have an issue where by if I try and update Cyanogenmod via the Cyanogenmod updates, the device reboots into recovery however it doesn't flash the update, recovery fails.
Can you advise which recovery I would need to install to be compatible with using OTA Cyanogenmod updates?
Click to expand...
Click to collapse
Flash manually thought TWRP/CWM(TWRP recommended) . the ROM is saved in internal storage in a folder called 'cmupdater'.

[HELP] TWRP flashing and wiping error

Hi all,
Today I flashed aosp6.0.1 on my redmi 1s using TWRP 2.8.4 but got error reading update binary script. I tried to wipe cache,data system . but there I got another error "unable to add storage 642***** " now I can't boot or flash anything. See the photo attached for better understanding.
I managed to flash cm11 but it was failed at flashing with an error "unable to remove storage 6*****".
The ROM boots but after 2-3 min it automatically reboots.
In need of help. Thanks in advance.
Snapdragon815 said:
Hi all,
Today I flashed aosp6.0.1 on my redmi 1s using TWRP 2.8.4 but got error reading update binary script. I tried to wipe cache,data system . but there I got another error "unable to add storage 642***** " now I can't boot or flash anything. See the photo attached for better understanding.
I managed to flash cm11 but it was failed at flashing with an error "unable to remove storage 6*****".
The ROM boots but after 2-3 min it automatically reboots.
In need of help. Thanks in advance.
Click to expand...
Click to collapse
Try flashing the latest twrp and then flash the aosp 6.0.1
why the hell r u using an outdated recovery update it to 3.0.0.0
gamefreaksuraj said:
why the hell r u using an outdated recovery update it to 3.0.0.0
Click to expand...
Click to collapse
Flashable zip available?
Edit: tried that also but same issue. No profit
Can't flash 6.0.1
But cm11 Nov build boots and hangs for 2 sec and then reboots.
Snapdragon815 said:
Flashable zip available?
Edit: tried that also but same issue. No profit
Can't flash 6.0.1
But cm11 Nov build boots and hangs for 2 sec and then reboots.
Click to expand...
Click to collapse
If you are trying to flash @TechExhibeo's mm rom then flash the recovery that is provided in the OP. The rom is built on caf and the recovery is also caf based. Also flash this firmware before flashing the rom
https://www.androidfilehost.com/?fid=24052804347850305
Thanks @fefifofum for this flashable zip. Hope this helps you out.
vicky romero said:
If you are trying to flash @TechExhibeo's mm rom then flash the recovery that is provided in the OP. The rom is built on caf and the recovery is also caf based. Also flash this firmware before flashing the rom
https://www.androidfilehost.com/?fid=24052804347850305
Thanks @fefifofum for this flashable zip. Hope this helps you out.
Click to expand...
Click to collapse
Thank you. Actually I did this yesterday only. Now working. Thank you for reply.
vicky romero said:
If you are trying to flash @TechExhibeo's mm rom then flash the recovery that is provided in the OP. The rom is built on caf and the recovery is also caf based. Also flash this firmware before flashing the rom
https://www.androidfilehost.com/?fid=24052804347850305
Thanks @fefifofum for this flashable zip. Hope this helps you out.
Click to expand...
Click to collapse
Good Job brother
keep it up
Regards
-TechExhibeo
TechExhibeo said:
Good Job brother
keep it up
Regards
-TechExhibeo
Click to expand...
Click to collapse
Thank you bro

Installed cm 14 lost recovery how to get twrp or back to cm 13

Hey new to XDA
first of all thanks for owsome forums.
i was on cm 13 after that i upgrade to cm14 and lost twrp recovery
i had tried flashing via fastboot,flashify but didnt work
some how i am able to get cm recovery
plss help to get twrp with cm 14 or to restore to cm 13 with twrp
thanks in advance
[email protected] said:
Hey new to XDA
first of all thanks for owsome forums.
i was on cm 13 after that i upgrade to cm14 and lost twrp recovery
i had tried flashing via fastboot,flashify but didnt work
some how i am able to get cm recovery
plss help to get twrp with cm 14 or to restore to cm 13 with twrp
thanks in advance
Click to expand...
Click to collapse
Are u using the modified twrp recovery?
[email protected] said:
Hey new to XDA
first of all thanks for owsome forums.
i was on cm 13 after that i upgrade to cm14 and lost twrp recovery
i had tried flashing via fastboot,flashify but didnt work
some how i am able to get cm recovery
plss help to get twrp with cm 14 or to restore to cm 13 with twrp
thanks in advance
Click to expand...
Click to collapse
Hey, just flash this twrp via fastboot, like described here and you`ll be fine.
Dupleshwar said:
Are u using the modified twrp recovery?
Click to expand...
Click to collapse
yup i was using modified but i directly flash cm 14 on 13 and lost the twrp recovery
fonsi78 said:
Hey, just flash this twrp via fastboot, like described here and you`ll be fine.
Click to expand...
Click to collapse
already tried bro downloaded from 2 diffrent place thought 1 may b corrupted but didnt work both
[email protected] said:
already tried bro downloaded from 2 diffrent place thought 1 may b corrupted but didnt work both
Click to expand...
Click to collapse
does fastboot mention any errors, while /flash recovery?
fonsi78 said:
does fastboot mention any errors, while /flash recovery?
Click to expand...
Click to collapse
nope it showed sucess but when i reboot into recovery it was black color screen only
[email protected] said:
Hey new to XDA
first of all thanks for owsome forums.
i was on cm 13 after that i upgrade to cm14 and lost twrp recovery
i had tried flashing via fastboot,flashify but didnt work
some how i am able to get cm recovery
plss help to get twrp with cm 14 or to restore to cm 13 with twrp
thanks in advance
Click to expand...
Click to collapse
U can try asking in cm 14 thread also maybe someone could be facing same issues as u
Dupleshwar said:
U can try asking in cm 14 thread also maybe someone could be facing same issues as u
Click to expand...
Click to collapse
can i get link for the post
[email protected] said:
can i get link for the post
Click to expand...
Click to collapse
http://forum.xda-developers.com/one...m-cyanogenmod-14-1-oneplus-3-t3496850/page158
Here it is
[email protected] said:
nope it showed sucess but when i reboot into recovery it was black color screen only
Click to expand...
Click to collapse
Thanks, this is your first post actually describing your issue.
As an experiment, try flashing the CM or OEM recovery in fastboot, just to see if that sticks.
We just want to narrow down why fastboot shows success and then you're getting a black screen.
Sent from my OnePlus 3 using XDA Labs

what TWRP do i use

Hey guys im having issues installing custom roms, it dosnt get past installing system files when ever installing any rom but im not sure if its the twrp that im using or what any help please?
Use TWRP official version just released few weeks back.
I found the one from Bluspark the best, haven't had any issues yet
https://forum.xda-developers.com/devdb/project/dl/?id=22806
vjendra said:
Use TWRP official version just released few weeks back.[/QUOT
flashed the current 3.0.3 and 3.0.4 and they both hang on the twrp screen
Click to expand...
Click to collapse
@shadowcreeper_1
Try using bluspark version : https://forum.xda-developers.com/devdb/project/dl/?id=22806
vjendra said:
@shadowcreeper_1
Try using bluspark version : https://forum.xda-developers.com/devdb/project/dl/?id=22806
Click to expand...
Click to collapse
no luck again im trying to flash 2 diffrent roms and it just stays stuck like 25% system installation
shadowcreeper_1 said:
no luck again im trying to flash 2 diffrent roms and it just stays stuck like 25% system installation
Click to expand...
Click to collapse
Instead of installing TWRP, try fastboot to TWRP with the TWRP recovery image file and once there mount system and try Flashing the ROM and see.

Categories

Resources