Develop Bugs

[Q] Problem with rooting my HOX

I have searched the forum for a few hours now trying to find something that related to my problem. I have found nothing...
I am resorting to making a new thread.
This is my first Android phone ever. I was with Apple for awhile and got fed up with they way there were operating things, and Android is better.
Now,
Last night I tried using Hasoon2000's All-in-One toolkit.
During the perm root process my phone fell off my desk and came uplugged from the OEM cable.
it rebooted back to factory settings, so it still works(which is good).
I'm stuck in what to do next.
I'm not sure if I have TWRP recovery flashed or not.
I also have a kernel that I want to flash over as well.
My bootloader is unlocked.
My general question is, how do I get my phone rooted with the kernel flashed over?
I would have posted this in Hasoon2000's toolkit thread but, I can't because I just registered.
Any help at all would be much appreciated.:laugh:

Nevermind, no answer is needed. I have successfully rooted my phone.
This thread can now be deleted.

Hard Bricked Phone, long story.

I assume since this is the AT&T Galaxy S 3 section, you already know that I have the SGH-i747 model.
So I've been looking for a while, and I can't find anyone that has caused my same problem the way I did. I'll give the entire story: After having my S3 for a while, I decided to try rooting. I did it successfully, and got CyanogenMod installed. I don't know what, but I wanted to go back to touchwiz. I loaded a backup because it was exactly what I had before CM. fast forward about a month and a half, AT&T keeps bugging me about some update. It's the 4.3 update, I find out, after I installed it. Now, here's the confusing part. The SuperUser app was left over, but I have no CWM and no root privileges. I used this watch?v=yuBuD9aL12o (Paste after yt url) tutorial to root and get SuperSU, and it worked. The phone restarted many times in that entire process, and in the end it worked. One forum told me to install and apk called EZ-Unlock12.apk to unlock my boot loader. (I have included the exact APK if you want to look at it.) It just said successful and I closed out. Now, I wanted to flash CWM again with ODIN. I installed the drivers, and booted up ODIN. This is when it happened. I loaded up the CWM.tar.md5 file into ODIN, (not exact file name but you get what I mean), and it did it's verification and said it was good. I don't remember having my phone plugged in while doing this. I went to shut down my phone and put it in DL/ODIN mode. But now it has happened. I tried to bring my phone back up, but it didn't give ANY feedback. The only possible way to make it do ANYTHING is to plug it in without the battery, and i get the red light. I think it may have been that boot loader unlock program that messed it up, but I can't say for sure.
TL;DR I hardbricked my phone and don't know what went wrong.

Is that app for the verizon version of the s3? I believe the AT&T version of the s3 is the SGH-i747; however, your post refers to the sch-747 in the first line. From everything I have read, there is no way to unlock the AT&T s3 bootloader.
Not sure if this would help: http://forum.xda-developers.com/showthread.php?t=2549068

audit13 said:
Is that app for the verizon version of the s3? I believe the AT&T version of the s3 is the SGH-i747; however, your post refers to the sch-747 in the first line. From everything I have read, there is no way to unlock the AT&T s3 bootloader.
Not sure if this would help: http://forum.xda-developers.com/showthread.php?t=2549068
Click to expand...
Click to collapse
I meant SGH-i747, sorry for any confusion.

Did you try the unbricking method I linked? I think that may be the only way to unbrick the phone since it appears that your bootloader has been corrupted. If the unbrick method doesn't work, you'll probably have to have it repair via jtag.

Were you able to get it back to normal state? I am in the same situation as you with the same problem and was wondering if i should go do the method someone provided or just go ahead and pay for a jtag service.

(HELP) TMO HTC One- keep wiping and still end up in bootloop

I got a new HTC One m8 from Tmobile a few weeks ago and instantly went to root and find out about S on and how I can get rid of it. I followed a rooting tutorial on unlockr diligently and unlocked bootloader and installed TWRP and SuperSU. I moved on to S-off the device and got to the last step of the tutorial where it starts to "chug" bottles(Firewater). After the first bottle, it tells me I'm out of luck and that my phone is patched. This confused me. Does this mean that my phone is forever stuck S-on? or does it mean that the developers of firewater haven't developed an S-off method for the newest version of HTC's software and that I simply have to wait.
This is just my first problem, even though I can't flash custom ROMs I was fine because I was willing to give the stock ROM a chance and just tweak it with root privileges, but no, the next time I had to restart for some various reason it starts bootlooping every few minutes. I swear I didn't do anything wrong when rooting. Is it just too new and the newest HTC software makes the rooting process obsolete making it impossible to root?
So I end up wiping the phone not being able to save all the pictures I took on my trip in the mountains. My phone is still rooted but the phone is wiped. I go about thinking the solution is fixed and when I decide to nandroid backup, I go into recovery, do a simple backup and when I restart it goes straight back to the infuriating bootloop. A simple nandroid backup shouldn't make it go into a bootloop.
So I decide to relock the bootloader, install the stock recovery and software again and start over. Maybe I really did mess up rooting. I go through the process again and low and behold my phone goes into a bootloop again.
I'm so sick and tired of this phone and I'm not sure why it always seems to happen to me. I follow the tutorials closely and it always ends up ****ting on me.
It recently went into a bootloop after a good 3 day run where I managed to keep the phone on the entire time. Had to restart because the wifi antenna wasn't working and another bootloop ensued. I decided to make this thread to see if any other new users are experiencing similar difficulties and seeing if anyone knows a cause or maybe a solution. Right now in the process of unrooting and going back to stock.
It would be a shame if there really is no way for me to unlock the full potential of my new phone. Almost wishing I had bought a nexus.
Thank you for anyone who was willing to read that and to anyone who takes the time to write a response. Thanks!

westonnate said:
I got a new HTC One m8 from Tmobile a few weeks ago and instantly went to root and find out about S on and how I can get rid of it. I followed a rooting tutorial on unlockr diligently and unlocked bootloader and installed TWRP and SuperSU. I moved on to S-off the device and got to the last step of the tutorial where it starts to "chug" bottles(Firewater). After the first bottle, it tells me I'm out of luck and that my phone is patched. This confused me. Does this mean that my phone is forever stuck S-on? or does it mean that the developers of firewater haven't developed an S-off method for the newest version of HTC's software and that I simply have to wait.
This is just my first problem, even though I can't flash custom ROMs I was fine because I was willing to give the stock ROM a chance and just tweak it with root privileges, but no, the next time I had to restart for some various reason it starts bootlooping every few minutes. I swear I didn't do anything wrong when rooting. Is it just too new and the newest HTC software makes the rooting process obsolete making it impossible to root?
So I end up wiping the phone not being able to save all the pictures I took on my trip in the mountains. My phone is still rooted but the phone is wiped. I go about thinking the solution is fixed and when I decide to nandroid backup, I go into recovery, do a simple backup and when I restart it goes straight back to the infuriating bootloop. A simple nandroid backup shouldn't make it go into a bootloop.
So I decide to relock the bootloader, install the stock recovery and software again and start over. Maybe I really did mess up rooting. I go through the process again and low and behold my phone goes into a bootloop again.
I'm so sick and tired of this phone and I'm not sure why it always seems to happen to me. I follow the tutorials closely and it always ends up ****ting on me.
It recently went into a bootloop after a good 3 day run where I managed to keep the phone on the entire time. Had to restart because the wifi antenna wasn't working and another bootloop ensued. I decided to make this thread to see if any other new users are experiencing similar difficulties and seeing if anyone knows a cause or maybe a solution. Right now in the process of unrooting and going back to stock.
It would be a shame if there really is no way for me to unlock the full potential of my new phone. Almost wishing I had bought a nexus.
Thank you for anyone who was willing to read that and to anyone who takes the time to write a response. Thanks!
Click to expand...
Click to collapse
If you wanna fix it quick then just do an RUU (t-mobile one) and after you've done that use Sunshine to root, unlock and S-OFF your phone. All though Sunshine costs $25 it is a sure fire to work.
You can find a tutorial for the RUU in the t-mobile forum I believe, not sure as im replying to this before I go to bed but it should have one. If by some chance "TMO" doesn't mean T-Mobile then my bad. Anyways if you get confused take your time and do your research or wait for someone else or me to assist you further.
Also if you used Xposed then that could be the problem, I've had it randomly bootloop me after days of use, just google the Xposed deactivate script zip or Uninstaller script and flash it to remove it. If you don't have it then don't do this part.
Lastly I doubt you'll regret buying an M8 after you get it setup properly, it's a great phone but of course that's just mine and a lot of people's opinion. Anyways good luck and hope one of my solutions fix it! If not then don't be afraid to ask more questions or request further assistance whether from me or someone else.

S1L3nTShaDoWz said:
If by some chance "TMO" doesn't mean T-Mobile then my bad.
Click to expand...
Click to collapse
It does, although T-Mobile is a huge carrier in Europe, and AFAIK only the US T-Mob variant has an RUU (and not immediately clear what version the OP has).

You can flash custom roms without s-off, and have you tried wiping cache and fixing permissions? Idk if that'd solve it or not but worth a try.

Verizon Galaxy Note 4 Battery Drain

First off, I am a newbie here, so please be kind.
I have a Samsung Galaxy Note 4 (SM-N910V), running Android 6.0.1 stock Verizon ROM.
I have been getting some strange battery issues. Not charging to 100%, shutting off at 35%, stuff like that.
I have wiped the cache partition and done a factory reset with no luck.
I have replaced the battery.
When I boot into recovery mode, I get dead Android, no command.
I don't know if the problems are related, but I suspect so.
Don't know what else to do. Any help would be appreciated.

soccerplayer00321 said:
First off, I am a newbie here, so please be kind.
I have a Samsung Galaxy Note 4 (SM-N910V), running Android 6.0.1 stock Verizon ROM.
I have been getting some strange battery issues. Not charging to 100%, shutting off at 35%, stuff like that.
I have wiped the cache partition and done a factory reset with no luck.
I have replaced the battery.
When I boot into recovery mode, I get dead Android, no command.
I don't know if the problems are related, but I suspect so.
Don't know what else to do. Any help would be appreciated.
Click to expand...
Click to collapse
Do you have an unlocked bootloader (root)? You could try reflashing twrp with odin to get recovery back.

No, not rooted. Have always been afraid to brick the device. If that is the direction that I have to go then I will give it a shot. I figure there are enough directions on here I could probably figure it out.

soccerplayer00321 said:
No, not rooted. Have always been afraid to brick the device. If that is the direction that I have to go then I will give it a shot. I figure there are enough directions on here I could probably figure it out.
Click to expand...
Click to collapse
If you don't want to root, you could try flashing the cpd1 firmware with odin and that should overwrite what might be throwing off your battery calibration. Unless it's a hardware problem that is. Are you comfortable using odin? Also if you have no interest in rooting, you could flash the most recent firmware.

I am a little familiar with Odin. I used it to put Android 6.0.1 onto my phone. Cpd1? This is the first that I am hearing (or reading) anything about cpd1. I would be interested in rooting, the biggest problem that I have with doing so is that most of the instructions that I have found are written for someone who has a better grasp of this stuff that I do. Do you know of any simple step-by-step walkthroughs? One that a newbie like myself could actually follow.
From what I've read about rooting, I am definitely interested, but still paranoid about bricking the phone. I do have an S5 as a backup if need be, so I am reluctantly willing to give it a shot.

soccerplayer00321 said:
I am a little familiar with Odin. I used it to put Android 6.0.1 onto my phone. Cpd1? This is the first that I am hearing (or reading) anything about cpd1. I would be interested in rooting, the biggest problem that I have with doing so is that most of the instructions that I have found are written for someone who has a better grasp of this stuff that I do. Do you know of any simple step-by-step walkthroughs? One that a newbie like myself could actually follow.
From what I've read about rooting, I am definitely interested, but still paranoid about bricking the phone. I do have an S5 as a backup if need be, so I am reluctantly willing to give it a shot.
Click to expand...
Click to collapse
I was just referring to the first mm firmware that ends with cpd1 and the reason I suggested that particular one was just in case you were thinking of rooting. If you use any of the "safe" firmwares you should be ok though. I agree about the rooting process, it's not the most user friendly thing I've ever seen, but it really isn't as bad as it looks. As long as your using the files provided in those threads there really isn't a huge risk in bricking your phone. Worst case scenario, you get into a jam that takes a little while to get out of so be sure that you leave yourself time to recover in case you can't use your phone for a couple hours. I think the worst part is the instability of kingroot which means you have to do all the adb commands as quick as possible and the fact that if you want mm you have to do the root process twice. These are the two posts that got me through it:
Lollipop
Marshmallow
Start with Lp first, it's necessary to unlock that before going to mm. If your problem is software related, installing the firmwares to root should fix things. Best of luck!

kevintm78 said:
I was just referring to the first mm firmware that ends with cpd1 and the reason I suggested that particular one was just in case you were thinking of rooting. If you use any of the "safe" firmwares you should be ok though. I agree about the rooting process, it's not the most user friendly thing I've ever seen, but it really isn't as bad as it looks. As long as your using the files provided in those threads there really isn't a huge risk in bricking your phone. Worst case scenario, you get into a jam that takes a little while to get out of so be sure that you leave yourself time to recover in case you can't use your phone for a couple hours. I think the worst part is the instability of kingroot which means you have to do all the adb commands as quick as possible and the fact that if you want mm you have to do the root process twice. These are the two posts that got me through it:
Lollipop
Marshmallow
Start with Lp first, it's necessary to unlock that before going to mm. If your problem is software related, installing the firmwares to root should fix things. Best of luck!
Click to expand...
Click to collapse
First off, thanks for your help. I appreciate it.
I finally got around to trying to do this with my phone and I can't even get past the first step. Install King Root, 4.8.5. I've tried 4.8.5 and 5.0, and neither one of them can get root access. Don't know what else to try.

soccerplayer00321 said:
First off, thanks for your help. I appreciate it.
I finally got around to trying to do this with my phone and I can't even get past the first step. Install King Root, 4.8.5. I've tried 4.8.5 and 5.0, and neither one of them can get root access. Don't know what else to try.
Click to expand...
Click to collapse
Did you ever have any luck with kingroot? If you haven't tried already, do a factory reset before you start the process and if it fails uninstall, reboot, reinstall and try again. I know it's a frustrating process and it seems to take most people many tries. When it fails on you how far does it get?

Kingroot was really frustrating. It would never get past 52%. After countless tries I moved to kingoroot. Kingo root worked on first try. Glad I unlocked and rooted my note 4
Sent from my SM-N910V using XDA-Developers mobile app

kevintm78 said:
Did you ever have any luck with kingroot? If you haven't tried already, do a factory reset before you start the process and if it fails uninstall, reboot, reinstall and try again. I know it's a frustrating process and it seems to take most people many tries. When it fails on you how far does it get?
Click to expand...
Click to collapse
No luck on Kingroot. It usually dies around 25% or so. Sometimes a little before that and sometimes after that. It never even got into the 35% range.
What I think I am going to do is go back to kitkat, original samsung rom. Try Kingoroot and see if that works. If not, I will push lolipop to it and try kingoroot again. If that doesn't work, I will try to push Marshmallow to it and try one more time. Hopefully one of them will be successful.

Ive never had issues bringing a device back on OS but this N4 is kicking my a&% bad. bought a used ( basically new ) sm-n910v it was updated to 6.0.1 mm and I'm not crazy about the MM I like KK and ive tried every firmware file known to man ive tried to slowly step back from 6.0 to 5.1.1 then 5.0 then 4.4.4 and they all fail says binary fused to boot 1 or something else and with 5.1.1 gets right to the end 99% then fails. would like to root and BL unlock any suggestions would be great. thanx in advance.

fastjohnson said:
Ive never had issues bringing a device back on OS but this N4 is kicking my a&% bad. bought a used ( basically new ) sm-n910v it was updated to 6.0.1 mm and I'm not crazy about the MM I like KK and ive tried every firmware file known to man ive tried to slowly step back from 6.0 to 5.1.1 then 5.0 then 4.4.4 and they all fail says binary fused to boot 1 or something else and with 5.1.1 gets right to the end 99% then fails. would like to root and BL unlock any suggestions would be great. thanx in advance.
Click to expand...
Click to collapse
I believe you can only get root on kk with a developer edition version of the v model. If it's a retail version and you want root it has to be at least 5.1.1 unfortunately. Have you tried the links in this post? Imo those are the best guides that I've seen to get your bootloader unlocked.

kevintm78 said:
I believe you can only get root on kk with a developer edition version of the v model. If it's a retail version and you want root it has to be at least 5.1.1 unfortunately. Have you tried the links in this post? Imo those are the best guides that I've seen to get your bootloader unlocked.
Click to expand...
Click to collapse
Yah I've tried most of them 5.1.1 gets to 98% then pooches out its exciting then bombs out, lol 4.4 doesn't get passed cache then fails. I'm using Odin 30.9, high quality data cable, thing is I can't move 》 till I can root to unlock the bootloader. My CID is 150 so that's good and I'm factory resetting the phone and pulling the SD card so it cannot mess with the flash. I'm running the NO_ A boot firmware that flashed perfect. Maybe I'm doing something wrong but I'm following the directions to the point.

fastjohnson said:
Yah I've tried most of them 5.1.1 gets to 98% then pooches out its exciting then bombs out, lol 4.4 doesn't get passed cache then fails. I'm using Odin 30.9, high quality data cable, thing is I can't move 》 till I can root to unlock the bootloader. My CID is 150 so that's good and I'm factory resetting the phone and pulling the SD card so it cannot mess with the flash. I'm running the NO_ A boot firmware that flashed perfect. Maybe I'm doing something wrong but I'm following the directions to the point.
Click to expand...
Click to collapse
It may not make a difference, but there is a newer version of Odin here that you could try.

kevintm78 said:
It may not make a difference, but there is a newer version of Odin here that you could try.
Click to expand...
Click to collapse
I'll give it a shot, right now I'm a Lil burned out on trying this because my other phone LG g4 is boot looped for no reason so I'm down to just my N4 and my N3 my gf has it. I forsee a big cup of coffee at 3am and let the flashing begin. Oh FYI I did try I think Odin 3.10 version it failed quicker so I'll try this version in the morning. I appreciate your help very much you'll be the 1st to know if it pushes through. Merry Christmas btw.

back on topic, I'm seeing kernel wakelocks for msm_hsic_host on Oscar kernel v1.3 but I'm pretty sure that was not always the case. Since that kernel hasn't been updated in a little while, I'm looking at others. Anyone got a preferred kernel with JasmineROM 7?

fz798 said:
back on topic, I'm seeing kernel wakelocks for msm_hsic_host on Oscar kernel v1.3 but I'm pretty sure that was not always the case. Since that kernel hasn't been updated in a little while, I'm looking at others. Anyone got a preferred kernel with JasmineROM 7?
Click to expand...
Click to collapse
Reflashed and thought the wakelocks were gone, but not so. msm_hsic_host appears to be related to cellular.

flyers00 said:
Kingroot was really frustrating. It would never get past 52%. After countless tries I moved to kingoroot. Kingo root worked on first try. Glad I unlocked and rooted my note 4
Click to expand...
Click to collapse
What I've noticed with this bootloader unlock is, like right now I'm 5.1.1 and my bootloader is unlocked but not rooted. OK if I use the the no A boot 6.0.1 file to flash mm it's stay unlocked and you can be rooted but if you use the normal full firmware 6.0.1 cpd1 file you lose your unlocked BL and back to start. Normally you unlock a BL it's stays unlocked no matter what you do. OK bugs with the no A boot 6.0.1 mm file no WiFi that's it. I really dislike 5.1.1 it sucks so there's not a lot of choices here. Good work on this exploit though.

Updating question

Ok, I start this off with the fact that this is my first phone with the whole slot A&B thing. I've done a ton of reading but it's still very confusing to me. I'm very confused on what exactly to do when it comes to updates. I'm stock rooted with TWRP installed on slot A. I'm also on the December build. I would like to update but I don't know what the easiest way to go about it is to be honest. I feel like an idiot but I guess that's because I'm really old school when it comes to this stuff. My rooting/roming goes back to the Samsung Captivate and countless other phones up until it got to be too much of a hassle to get a phone from a carrier that could be messed with. Now that I have rambled on, I thought it would be different getting a Pixel but this whole slot thing has me all confused. I basically want to stay stock rooted for now and possibly try a kernel down the line but I'm very happy with stock for now. Any advice would be greatly appreciated.
Thanks

pside15 said:
Ok, I start this off with the fact that this is my first phone with the whole slot A&B thing. I've done a ton of reading but it's still very confusing to me. I'm very confused on what exactly to do when it comes to updates. I'm stock rooted with TWRP installed on slot A. I'm also on the December build. I would like to update but I don't know what the easiest way to go about it is to be honest. I feel like an idiot but I guess that's because I'm really old school when it comes to this stuff. My rooting/roming goes back to the Samsung Captivate and countless other phones up until it got to be too much of a hassle to get a phone from a carrier that could be messed with. Now that I have rambled on, I thought it would be different getting a Pixel but this whole slot thing has me all confused. I basically want to stay stock rooted for now and possibly try a kernel down the line but I'm very happy with stock for now. Any advice would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
@Homeboy76 will get you squared away :good:
https://forum.xda-developers.com/pi...-android-9-0-pie-unlock-t3857195/post77944292

Badger50 said:
@Homeboy76 will get you squared away :good:
https://forum.xda-developers.com/pi...-android-9-0-pie-unlock-t3857195/post77944292
Click to expand...
Click to collapse
Thanks for the reply. I've read throughout that thread numerous times and I still can't determine the easiest way to update my phone and the necessary steps to take to get there. I just want to be stock rooted like I am now but don't know what steps to take to get there. Like do I need to unroot first, relock bootloader? I'm sure all those answers are in that thread but I'm probably just too dense to see them. I haven't really had a solid rooted phone in like 3 years so I'm used to things being done way different. Some times I miss my old HTC Inspire/Desire HD. There was so much development for that phone and it was all very straightforward.

pside15 said:
Thanks for the reply. I've read throughout that thread numerous times and I still can't determine the easiest way to update my phone and the necessary steps to take to get there. I just want to be stock rooted like I am now but don't know what steps to take to get there. Like do I need to unroot first, relock bootloader? I'm sure all those answers are in that thread but I'm probably just too dense to see them. I haven't really had a solid rooted phone in like 3 years so I'm used to things being done way different. Some times I miss my old HTC Inspire/Desire HD. There was so much development for that phone and it was all very straightforward.
Click to expand...
Click to collapse
This guide is how I update the monthly security patches. It is predicated on the notion that you have the latest platform-tools (28.0.1) and that your computer and phone are communicating well. It doesn't not require you to switch slots, and it will not wipe your data, and, you do not have to unroot before you begin. Happy flashing, and good luck
And never ever ever relock the bootloader! :crying:

Badger50 said:
This guide is how I update the monthly security patches. It is predicated on the notion that you have the latest platform-tools (28.0.1) and that your computer and phone are communicating well. It doesn't not require you to switch slots, and it will not wipe your data, and, you do not have to unroot before you begin. Happy flashing, and good luck
And never ever ever relock the bootloader! :crying:
Click to expand...
Click to collapse
Awesome, thank you very much for that. Yeah, I figured that about the bootloader. Does it matter if I have TWRP installed? That's the one main confusing thing to me. How you can have TWRP installed or not installed. I'm used to absolutely having to have TWRP or some other kind of custom recovery installed. But like I said it's been quite a while since I was really able to root/ROM a phone. I was basically forced to move to AT&T and opted for the Active line of Galaxy phones since I have little kids plus even the phones that were rootable and such seemed like more of a hassle than it was worth. The last phone I had that had some good development was probably the LG G3 on T-MOBILE. For some reason the T-MOBILE version had an unlocked bootloader or could be unlocked, don't remember exactly. But then a coworker got a Pixel 2XL and I got the itch again, not knowing how much had really changed though. Ok, I think I've rambled on enough now. Thanks again for the help.

pside15 said:
Awesome, thank you very much for that. Yeah, I figured that about the bootloader. Does it matter if I have TWRP installed? That's the one main confusing thing to me. How you can have TWRP installed or not installed. I'm used to absolutely having to have TWRP or some other kind of custom recovery installed. But like I said it's been quite a while since I was really able to root/ROM a phone. I was basically forced to move to AT&T and opted for the Active line of Galaxy phones since I have little kids plus even the phones that were rootable and such seemed like more of a hassle than it was worth. The last phone I had that had some good development was probably the LG G3 on T-MOBILE. For some reason the T-MOBILE version had an unlocked bootloader or could be unlocked, don't remember exactly. But then a coworker got a Pixel 2XL and I got the itch again, not knowing how much had really changed though. Ok, I think I've rambled on enough now. Thanks again for the help.
Click to expand...
Click to collapse
Doesn't matter if you have twrp installed or not. When you fastboot the update, it'll wipe it out anyway :good: