^Does anyone know if xposed from the official Web page will work my rooted tablet with 4.4.2. Kit kat.I just don't want to brick my tablet. Also I have been having these freezes where I can't use touchscreen and I have to press Power button off then on to fix touch screen. Help is appreciated.
Also how do I know I have installed twrp
Related
Hi all,
I got acer a100 tablet and its started working perfectly for two days. third day i try to switch on tablet now the touch screen is not working. then i put on charge suddenly its started working then i did factory reset , then for full one day i didnot use the tablet now again its not working do i need to put on charge before using the tablet or what do i need to do for solve this issue.
Then i tried to contact acer for support because of no warranty and unavailability of spares they told its not possible to fix the issue. The i rooted the tab myself and unlock boot loader... and try to install the OS.... i have installed the OS also but its perfomance is better compare to old... but still sometimes its unresponsive...
What else do i need to do to solve this issue.... If possible can anyone give me the link for official release of Android 4.0.3 so that i will try to install it again.
I have installed TWRP also...but first it works fine after i installed the new OS then i cannot able to open TWRP also... its directly going to android recovery mode instead of TWRP... their also i can navigate into different options but cant able to select anything...
I am totally upset because of my tab behaviour.... Can you please anyone help me...
Need help urgently. My phone updated from 4.1 to 4.4.2 and buttons stopped working. Everything is stuck. It was stock update. Tried even custom rom DN3 but still the same. My note 2 is from UAE.
I have tried all the method, even custom rom. Now warranty is void so cant even go to samsung service center. Cant downgrade also. i read about samsung service center downgrading to 4.1 on this forum. need help.
Seems its a common problem after update to 4.4.2. i thought i was updating to stable and did not know got trapped now. will have to replace phone. can replacing bootloader might help. menu and back buttons work in recovery screen. very strange issue.
Very strange. I went to samsung repair center and they had to replace motherboard. then camera was not working and headphone was giving issue so that was replaced. Seems all the hardware is replaced and phone firmware is at 4.3. did samsung rollback the update.
Finally back on track. lets see what next. knox back to 0
Hi my friend;
Did you solve your problem. I have same problem with you. It started from 4.3 update. Now i'm using 4.1.2. Because up the 4.1.2 rom my buttons not working. If you find a solution please inform me
I found a little workaround .... i first update to kit kat with pit file and nand clear and still no sign of buttons...then i flashed twrp recovery and flashed slimbean 4.4.4 (latest version) then miracle the capacitive buttons work perfect ... so i can think someone make a workaround for the official firmware
after i press power button + vol+ button, it show "download mode is disabled by killswitch", i just put the correct pin to Mcafee but it still show the same message, please help, thank you
F400S
4.4.2 (can not update to 5.0 by OTA / PC Suite:crying
Have you tried to root your phone and remove McAfee completely? That was the first thing that I did on my F400S and F460S.
nothing to cheer up
i also have the same model and "it" also does not go into recovery , i am though able to get it into download, - first load your lg driver and make sure your port is 41 under device manager, once in 41 you can use the flashtool to upload but ONLY A KDZ FILE , that's as much as i got from this site. (btw there is a lollipop kdz file for the k400 floating around, you can use it to flash lollipop but it isn't rooted - i can find the link and if you're successfull at getting lollipop to root with these 2 files, i will really appreciate you help - email me)
the volume down + power just don't work
try pressing volume down + power + volume up and when logo shows up let go volume up for less than a second and let me know if you can decipher the korean page.
this korean page has 3 options but all of them lead to Reboot System., i don't read korean and no one volunteered help.
Also with the phone working i loaded CWM recovery and with it running i was able to flash a lollipop zip file for F400 but this file is not rooted and i couldn't root it so i reflashed back to an older kitkat version
if you're luckier than me, i would appreciate you letting me know how you were able to load the lollipop and root it afterward.
sincerely
poorpoorpoor said:
after i press power button + vol+ button, it show "download mode is disabled by killswitch", i just put the correct pin to Mcafee but it still show the same message, please help, thank you
F400S
4.4.2 (can not update to 5.0 by OTA / PC Suite:crying
Click to expand...
Click to collapse
Pilz said:
Have you tried to root your phone and remove McAfee completely? That was the first thing that I did on my F400S and F460S.
Click to expand...
Click to collapse
i tried stump root and activate su, however the system do not allow to remove Mcafee even rooted, maybe my procedure is wrong as i am a newbie on this :laugh:
exlaval said:
i also have the same model and "it" also does not go into recovery , i am though able to get it into download, - first load your lg driver and make sure your port is 41 under device manager, once in 41 you can use the flashtool to upload but ONLY A KDZ FILE , that's as much as i got from this site. (btw there is a lollipop kdz file for the k400 floating around, you can use it to flash lollipop but it isn't rooted - i can find the link and if you're successfull at getting lollipop to root with these 2 files, i will really appreciate you help - email me)
the volume down + power just don't work
try pressing volume down + power + volume up and when logo shows up let go volume up for less than a second and let me know if you can decipher the korean page.
this korean page has 3 options but all of them lead to Reboot System., i don't read korean and no one volunteered help.
Also with the phone working i loaded CWM recovery and with it running i was able to flash a lollipop zip file for F400 but this file is not rooted and i couldn't root it so i reflashed back to an older kitkat version
if you're luckier than me, i would appreciate you letting me know how you were able to load the lollipop and root it afterward.
sincerely
Click to expand...
Click to collapse
Thank you for your help, i tried flashtool already but it doesn't work, the phone reboot during the updating , it show "the message" and go back to normal boot after that, i tried many times already:crying:
Hi, I was fixing my Oneplus 3t because my girlfriend installed an official update that appeared on the phone and once that was done it didnt boot anymore. When I entered Twrp the touchscreen didnt work anymore. I cant get it to work. I tryed the unbrick method. That way I was able to install android again but touch screen still doesn't work. Any idea?
Eternam said:
Hi, I was fixing my Oneplus 3t because my girlfriend installed an official update that appeared on the phone and once that was done it didnt boot anymore. When I entered Twrp the touchscreen didnt work anymore. I cant get it to work. I tryed the unbrick method. That way I was able to install android again but touch screen still doesn't work. Any idea?
Click to expand...
Click to collapse
Did you change the screen or the digitizer in the past? Or drop the phone?
Hi everyone,
I have a problem with my Android device where the display is not working properly and I need to boot it up without the LCD screen. When the LCD screen is attached, the device boots up normally and all functions work properly. However, when the LCD screen is not attached, the device goes into a bootloop.
I have already rooted the device and installed TWRP, and I have also installed LineageOS as the new operating system. However, the problem with bootloop still persists.
I'm wondering if there's any way to fix this issue and boot up the device without the LCD screen. I've searched for solutions online but couldn't find anything that works for my device. So, I'm hoping to get some help from the community here.
If anyone has experience with fixing bootloop issues on an Android device without display on LineageOS, please share your insights or any tips/tricks that might be helpful. Your help would be greatly appreciated.
Thank you!