Related
Hello all!
So I've been rooting and installing custom ROMs on my Android phones since getting started on my Galaxy S2 back in the day, and as it stands I've never encountered such an annoying roadblock as I've been forced to deal with over the past few days.
I just got a new HTC 10, and quickly went ahead and rooted my phone to get a custom ROM on there. The ROM seemed to boot fine, but the home button wasn't working and I had forgotten to download and install GApps. The other problem was, upon flashing the new LineageOS, TWRP would not recognize any files whatsoever on my device--including the backup I had made. So, I went ahead and flashed the latest RUU and returned to stock. After realizing the RUU is Nougat firmware, I got the latest TWRP and went ahead to try and reinstall Lineage again.
This time, however, the phone decided to stop on a screen asking for a password before it fully boots. I've tried this with every ROM I've installed and every time it will ask for a password. Boot into Recovery, and it will ask for a password there and have all my files hidden, keeping me from doing anything short of a re-flashing my RUU to return to stock. I know these ROMs evidently encrypt your phone during first boot, but I'm at a loss for info on what I'm apparently doing wrong to cause this issue.
Is this an Android N issue? On M, I was able to boot into Lineage, though TWRP still had the file issue. Anyways, whatever help would be fully appreciated. Since I'm a new user I wasn't able to inquire directly on the LineageOS thread, and so deferred to Q&A.
EDIT:
I've solved the issue. After re-flashing the RUU, flashing TWRP, and re-rooting over and over, I figured out what seemed to be going on.
In case anyone else has the same problem as me, here was my solution:
Starting from stock, I went ahead and flashed my phone with the latest TWRP compatible with N (3.0.3.0 at this current time). Afterwards I flashed LineageOS and GApps. As usual, upon reboot, the phone needed a password to get in. So, I rebooted to Recovery, which also required a password. I hit cancel, wiped the phone with a factory reset, formatted all data, and restarted. This did the trick, and I've been running LineageOS 7.1 with no problems whatsoever!
Which version of TWRP are you using at the moment. If you're on N firmware I'd recommend to use 3.0.3-0, that is to be found on the download tab of the TWRP thread.
Sent from my htc_pmeuhl using XDA Labs
dreDREb13 said:
Hello all!
So I've been rooting and installing custom ROMs on my Android phones since getting started on my Galaxy S2 back in the day, and as it stands I've never encountered such an annoying roadblock as I've been forced to deal with over the past few days.
I just got a new HTC 10, and quickly went ahead and rooted my phone to get a custom ROM on there. The ROM seemed to boot fine, but the home button wasn't working and I had forgotten to download and install GApps. The other problem was, upon flashing the new LineageOS, TWRP would not recognize any files whatsoever on my device--including the backup I had made. So, I went ahead and flashed the latest RUU and returned to stock. After realizing the RUU is Nougat firmware, I got the latest TWRP and went ahead to try and reinstall Lineage again.
This time, however, the phone decided to stop on a screen asking for a password before it fully boots. I've tried this with every ROM I've installed and every time it will ask for a password. Boot into Recovery, and it will ask for a password there and have all my files hidden, keeping me from doing anything short of a re-flashing my RUU to return to stock. I know these ROMs evidently encrypt your phone during first boot, but I'm at a loss for info on what I'm apparently doing wrong to cause this issue.
Is this an Android N issue? On M, I was able to boot into Lineage, though TWRP still had the file issue. Anyways, whatever help would be fully appreciated. Since I'm a new user I wasn't able to inquire directly on the LineageOS thread, and so deferred to Q&A.
Click to expand...
Click to collapse
Installing cm will encrypt your device, was you encrypted previously? Then you would have created a password to access your device.
In my case, I formatted data and then flashed my sense rom (venom) I chose not to encrypt, cm doesn't give this option when you flash it so you have no choice at the time. So if you don't have the password and the device has been encrypted you'd have to format data, don't jump into that just yet though.
Unless someone else knows a way around that, personally I couldn't. However I did have a rom installed so I could boot the rom and back up my data once in the OS. Then format (not wipe) and then reinstall the rom.
Sounds confusing, to be sure we need more info from you.
Do you have an operating system at the moment? If you do then back up your data so that's safe.
Do you know the password to decrypt your phone??
5m4r7ph0n36uru said:
Which version of TWRP are you using at the moment. If you're on N firmware I'd recommend to use 3.0.3-0, that is to be found on the download tab of the TWRP thread.
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
I'm running 3.0.3.0. I had a problem after re-flashing my RUU where TWRP wouldn't boot, but I quickly realized this was due to using an M compatible TWRP with the new firmware.
dladz said:
Installing cm will encrypt your device, was you encrypted previously? Then you would have created a password to access your device.
In my case, I formatted data and then flashed my sense rom (venom) I chose not to encrypt, cm doesn't give this option when you flash it so you have no choice at the time. So if you don't have the password and the device has been encrypted you'd have to format data, don't jump into that just yet though.
Unless someone else knows a way around that, personally I couldn't. However I did have a rom installed so I could boot the rom and back up my data once in the OS. Then format (not wipe) and then reinstall the rom.
Sounds confusing, to be sure we need more info from you.
Do you have an operating system at the moment? If you do then back up your data so that's safe.
Do you know the password to decrypt your phone??
Click to expand...
Click to collapse
Turns out formatting the data was the solution. Thankfully this phone is brand new, so there was no data to lose.
As for why Cyanogen and Lineage automatically encrypt without giving some sort of default password, I have no idea...
Thanks for the help, though!
dreDREb13 said:
Turns out formatting the data was the solution. Thankfully this phone is brand new, so there was no data to lose.
As for why Cyanogen and Lineage automatically encrypt without giving some sort of default password, I have no idea...
Thanks for the help, though!
Click to expand...
Click to collapse
Could have thought of that myself. Encryption used by Cyanogen/Lineage is different to HTCs encryption used on Sense based ROMs. Thanks for your feedback.
Sent from my htc_pmeuhl using XDA Labs
dreDREb13 said:
I'm running 3.0.3.0. I had a problem after re-flashing my RUU where TWRP wouldn't boot, but I quickly realized this was due to using an M compatible TWRP with the new firmware.
Turns out formatting the data was the solution. Thankfully this phone is brand new, so there was no data to lose.
As for why Cyanogen and Lineage automatically encrypt without giving some sort of default password, I have no idea...
Thanks for the help, though!
Click to expand...
Click to collapse
There is no password and I've had it out in the cm thread, apparently it's common knowledge, which we've both found out its not, there is no password either so you did what was required.
Also, click thanks instead of saying mate [emoji6]
Glad you're back up and running.
thanks had same issue when installing Lineage 14.1 nightly on my HTC 10 today, which already had twrp on it and the stock rom - your solution worked.
i.e.
turn off device
hold volume down while pressing power for few seconds
choose reboot to bootloader from menu
choose boot to recovery mode
hit cancel when prompted for password
choose wipe from twrp, use default options
reboot
no more password prompt.
Hi all,
I'm currently not encrypted and prefer to keep it that way, I don't like entering passwords everytime I go to TWRP and I prefer the old school android system where encryption was a choice, not a mandatory decision made for you.
So when I install a ROM I run a few commands prior to installation to avoid forced encryption, unless it has an option within aroma to disable force encryption which most don't
Thanks to @j to the 4n for help with this, legend
Anyway if you'd like to install a ROM like lineage or aosp or resurrection remix etc and remain not encrypted? Keep reading.
*Note: if you're encrypted prior to doing this then stop, this is for people who've chosen to disable force encryption already but would like to retain it after installing aosp / lineage ROMs.
However if you'd like to remove encryption you'll need to format data via TWRP, not a wipe! Format.
Make sure you back up prior to doing this as it will format data, best to have the ROM on your SD card too so you don't end up with no OS.
If you've done the above or you already have a ROM installed without encryption, then you should be good to go.
------------------------------------------------------------------------------------------------
Just before youre about to install a ROM, let's say resurrection remix ( tested )
Make sure your phone is in TWRP and you're connected to your PC then just before you're about to click install, open up a command prompt on your PC then from ADB shell send the following commands to the device from your PC..
For Magisk:
echo "KEEPFORCEENCRYPT=false" >> /cache/.magisk
If the rom uses SuperSU, send the following commands.
echo "KEEPFORCEENCRYPT=false" >> /data/.supersu
echo "KEEPFORCEENCRYPT=false" >> /cache/.supersu
Then install your rom as normal.
Obviously for ROMs like viper your don't need to do this as there is an option within aroma, but for the likes of RR or lineage this will mean your phone will not encrypt on boot.
Should work for all ROMs but I've not tested this on all of them so if it goes wrong then it's not on me, this worked perfectly for me on RR coming from viper whilst not encrypted.
*Note: if you're not sure what root method your ROM uses then simply send all three commands and you should be good to go.
By using these you're not going to find yourself in TWRP being asked for a password you don't have as your device has been encrypted, I've lost data myself this way and it's extremely annoying.
:good:
If I can ask if anyone tries this and it works, would you mind replying with what it worked on so I can update the OP.
Cheers.
PS: if you're not sure what this is or have any questions, please ask away
Anyway to do this from the device for when your not near a PC?
JohnFawkes said:
Anyway to do this from the device for when your not near a PC?
Click to expand...
Click to collapse
Yes i believe it is, would need to write up a script which is ran prior to installing the rom, i've not got around to doing it yet.
Strictly speaking this should be an option with all roms, it's not exactly a lot of work is it?
Deleted
Works pretty well on Stock ROM.
Just RUU'd, and before rebooting went into download mode, flashed Recovery, flashed SuperSU, used this Command. and boom.
Multirom works.
I used to have a one plus 3 and for some time before everyone used forced decryption the good ol friends from kali net hunter made a forced decryption zip, I will put a link down below, but listen when I say this, every time you flash a new boot .Img, or rom on the htc 10 you need to flash this if you want to stay decrypted. Its ok if you flash multiple times.
The file you want is, "no verity force encrypt".
I've used it on almost every aosp and stock based rom I've flashed also used on many custom kernels to, it still stayed decrypted.
https://build.nethunter.com/android-tools/
Dlind said:
I used to have a one plus 3 and for some time before everyone used forced decryption the good ol friends from kali net hunter made a forced decryption zip, I will put a link down below, but listen when I say this, every time you flash a new boot .Img, or rom on the htc 10 you need to flash this if you want to stay decrypted. Its ok if you flash multiple times.
The file you want is, "no verity force encrypt".
I've used it on almost every aosp and stock based rom I've flashed also used on many custom kernels to, it still stayed decrypted.
https://build.nethunter.com/android-tools/
Click to expand...
Click to collapse
Yea it's used on the OnePlus 5 too. I wrote this prior to knowing of its existence and because the likes of lineage and other ROMs just assume you know, no warning.
Losing data is not fun.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
dladz said:
Yea it's used on the OnePlus 5 too. I wrote this prior to knowing of its existence and because the likes of lineage and other ROMs just assume you know, no warning.
Losing data is not fun.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yeah it pisses me off. But at least with this handy zip you can flash it anyway and have some mental relief that you stay decrypted.
Dlind said:
I used to have a one plus 3 and for some time before everyone used forced decryption the good ol friends from kali net hunter made a forced decryption zip, I will put a link down below, but listen when I say this, every time you flash a new boot .Img, or rom on the htc 10 you need to flash this if you want to stay decrypted. Its ok if you flash multiple times.
The file you want is, "no verity force encrypt".
I've used it on almost every aosp and stock based rom I've flashed also used on many custom kernels to, it still stayed decrypted.
https://build.nethunter.com/android-tools/
Click to expand...
Click to collapse
i've flashed the v 5.1 got greeted by a "Encrypting" Wait while your phone is being encrypted. Time remaining 01:50 Screen.
Guess that does not work on PureFusion OS ROM / HTC 10
Edit: Okay... this does NOT work when swapping Internal with Secondaries ROM in Multirom, but for a new install it does...
Haldi4803 said:
i've flashed the v 5.1 got greeted by a "Encrypting" Wait while your phone is being encrypted. Time remaining 01:50 Screen.
Guess that does not work on PureFusion OS ROM / HTC 10
Edit: Okay... this does NOT work when swapping Internal with Secondaries ROM in Multirom, but for a new install it does...
Click to expand...
Click to collapse
Sorry I hadn't tested with all ROMs, not even sure Pure Fusion was even available when I had my HTC 10.
Stick to the script, it's quick, easy and works, you can try a zip but unless someone has gone before you you're potentially walking into a bad time.
Jep.... the zip doesn't seem to work no matter what. Not even on Stock ROM. Prolly not compatible with HTC10.
These 2 Command lines though do work perfectly fine on PureFusion OS... simply install ROM, install SU, enter 2 lines. Done.
Haldi4803 said:
Jep.... the zip doesn't seem to work no matter what. Not even on Stock ROM. Prolly not compatible with HTC10.
These 2 Command lines though do work perfectly fine on PureFusion OS... simply install ROM, install SU, enter 2 lines. Done.
Click to expand...
Click to collapse
That's absolutely fine. Because this thread isn't about the zip..I have nothing to do with that, so in regards to the zip you flash it at your own risk.
Deleted
Though i do agree with him that having a .zip and not needing a Computer every time would be pretty usefull.
Does anyone know how to create TWRP flashable zips that includes only this 2 commands?
Hello I tied this for RR rom but I got this message in the cmd, am i doing something wrong?
edit i found my fault I had to adb shell
I know it's been about a year, since somebody posted, but: if anbyone else like me stumbles across this thread, have a look at: https://www.didgeridoohan.com/magisk/MagiskInstallationIssues
It gives you even more information how to enable or disable encryption or dm-verity while usinf magisk.
Btw. you can use the terminal in twrp also, see link.
Can I use the built-in twrp terminal for echo-ing rather than using adb shell ?
Subh4sh said:
Can I use the built-in twrp terminal for echo-ing rather than using adb shell ?
Click to expand...
Click to collapse
Ofcourse,cause echo command is available everywhere.just make sure you install the magisk/supersu first before running the command
hi,
If I format /data, then the encryption is gone and LOS can be installed where backup with TWRP work?
I have U11, but i think it is the same...
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
Unbrick guide method 2 should fix it, otherwise ask Oneplus support.
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
Which TWRP are you using? Try using the latest from eng.stk's (Blue Spark).
If you want MM, the more stable and improved version is 3.2.8. What you downloaded is 3.2.4. So, download 3.2.8 and boot into recovery, wipe system, dalvik cache, cache and data including internal storage (you will lose all your files including photos, videos etc). Boot the phone into the bootloader mode and push the ROM to the phone and flash it from recovery or flash the ROM from PC using adb commands. Flash TWRP again and boot into recovery and if ok, boot into system. If everything is ok, you can flash SuperSU/Magisk, if you need root. A couple of wipes of both the caches in between may also be done.
If this doesn't sort out the issue, use Method 2 from the Mega Unbrick Guide in XDA and follow every instruction scrupulously, especially relating to drivers.
If even this fails, it is a hardware issue.
EDIT: I see that Puddi Puddin beat me to it.
Puddi_Puddin said:
Unbrick guide method 2 should fix it, otherwise ask Oneplus support.
Click to expand...
Click to collapse
tnsmani said:
If this doesn't sort out the issue, use Method 2 from the Mega Unbrick Guide in XDA and follow every instruction scrupulously, especially relating to drivers.
If even this fails, it is a hardware issue.
Click to expand...
Click to collapse
Step 8 doesn't work for me...
I guess the phone goes back to the repair company then
tnsmani said:
Which TWRP are you using? Try using the latest from eng.stk's (Blue Spark).
If you want MM, the more stable and improved version is 3.2.8. What you downloaded is 3.2.4. So, download 3.2.8 and boot into recovery, wipe system, dalvik cache, cache and data including internal storage (you will lose all your files including photos, videos etc). Boot the phone into the bootloader mode and push the ROM to the phone and flash it from recovery or flash the ROM from PC using adb commands. Flash TWRP again and boot into recovery and if ok, boot into system. If everything is ok, you can flash SuperSU/Magisk, if you need root. A couple of wipes of both the caches in between may also be done.
Click to expand...
Click to collapse
I am using the newest (twrp-3.1.1-2-oneplus3.img) but the problem is that I can't see anything in recovery or elsewhere :/
Peybro said:
Step 8 doesn't work for me...
I guess the phone goes back to the repair company then
Click to expand...
Click to collapse
Well you have really messed up something it seems.. This shouldnt be happening by rooting and stuff, I think it is pure coincidence
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
What exactly did you flash other than OOS and recovery? Why did you need a few flashes? You flashed SuperSU or Magisk? Root still works on an encrypted system so not understanding some things from your post
Puddi_Puddin said:
Well you have really messed up something it seems.. This shouldnt be happening by rooting and stuff, I think it is pure coincidence
Click to expand...
Click to collapse
I hope so - maybe the repair company messed the screen connection up and they fix it for free... :angel:
Renosh said:
What exactly did you flash other than OOS and recovery? Why did you need a few flashes? You flashed SuperSU or Magisk? Root still works on an encrypted system so not understanding some things from your post
Click to expand...
Click to collapse
First I flashed newest TWRP and Paranoid Android but it wasn't as good as expected and so I flashed back to OOS (_008 I think) and everything worked but when I wanted to flash Magisk (because SafetyNet) via TWRP I couldn't because the phone wanted a pattern to unlock encryption.
I read that it would be the same as I used to unlock my phone (btw the only 1 I use) but it didn't work...
Before I found a guide with the right order to remove the encryption I tried different ways by myself (that's because I flashed a few times) (Toolkit, "Fastboot format userdata", TWRP format) but nothing removed it.
Then I wanted to follow that guide but meanwhile there was no OS at all and img Install via fastboot didn't work but I managed to get the newest stable OOS (_16 I think) on the phone, installed it with TWRP aaaaaand...
YELLOW-ORANGEish PIXEL SCREEN
fastboot and everything works - I just can't see what's going on
Peybro said:
I hope so - maybe the repair company messed the screen connection up and they fix it for free... :angel:
First I flashed newest TWRP and Paranoid Android but it wasn't as good as expected and so I flashed back to OOS (_008 I think) and everything worked but when I wanted to flash Magisk (because SafetyNet) via TWRP I couldn't because the phone wanted a pattern to unlock encryption.
I read that it would be the same as I used to unlock my phone (btw the only 1 I use) but it didn't work...
Before I found a guide with the right order to remove the encryption I tried different ways by myself (that's because I flashed a few times) (Toolkit, "Fastboot format userdata", TWRP format) but nothing removed it.
Then I wanted to follow that guide but meanwhile there was no OS at all and img Install via fastboot didn't work but I managed to get the newest stable OOS (_16 I think) on the phone, installed it with TWRP aaaaaand...
YELLOW-ORANGEish PIXEL SCREEN
fastboot and everything works - I just can't see what's going on
Click to expand...
Click to collapse
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
tnsmani said:
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
Click to expand...
Click to collapse
I can give it a try later (and in the future when everything works again) but I do not think (at least I can't imagine) that the problem I have comes from recovery.
I know the reason!
I found other people who also had a static screen and they said they could fix it by pressing the screen back on its contacts...
I did so and it worked!... A bit... For a few minutes...
So the static definitely wasn't the result of rooting and stuff but the repair company's fault.
I hope they accept their mistake and fix it. Thx for everyone here trying to hel me!
P.S.
tnsmani said:
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
Click to expand...
Click to collapse
And as soon as I can I will try this TWRP
-------------------------------- Edit: --------------------------------
(Just in case people get same problem)
[after Mega Unbrick Method 2 finally worked (I put the stock zip in the tool's folder)]
This morning I restarted the phone just because and I could see what was going on on the phone - but the display was still crazy with yellow tint and colorful stripes etc.). After setup it asked me to download & install newest stock rom; I did and after reboot everything was fine again....
Don't know what happened here but it seems to work again.
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
Code:
tar -xzf ********.tgz
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
viking777 said:
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
Click to expand...
Click to collapse
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
12:121390 said:
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
Click to expand...
Click to collapse
Anti roll back is disabled and not an issue if bootloader is unlocked
Nice thread. Tried it as well but no chance 10.0.3.00 + twrp + magisk. And you are right the problem is twrp.
Sent from my Phh-Treble vanilla using Tapatalk
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
brother i also want to install RR PIE Rom can you please give me the guide link?
hossman said:
Anti roll back is disabled and not an issue if bootloader is unlocked
Click to expand...
Click to collapse
correct it is not. what happened was.. lol. i thought i was crafty and did some file swapping and made miflash setups that would flash so the stock files as usual , but with gsi's like RR and/or bootleggers for the system image. and it works, up until i flashed from RR to bootleggers with those setups described previously . there is where my genius was flawed. lol. lesson learned
---------- Post added at 06:43 AM ---------- Previous post was at 06:38 AM ----------
marstonpear said:
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
Click to expand...
Click to collapse
for me, i have not come across anything caused by the GSI. any issues I've faced are purely self inflicted.
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Voodoojonny said:
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Click to expand...
Click to collapse
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
viking777 said:
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
Click to expand...
Click to collapse
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Voodoojonny said:
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Click to expand...
Click to collapse
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
viking777 said:
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
Click to expand...
Click to collapse
There seems to be some bugs restoring system and vendor... Some users talked about... I usually only save and restore the data and boot partition and I never had any problems with that. For all other partitions you can use miflash or fastboot...
Yeah all my twrp full backups don't work after a fresh stock installment either, that's very annoying.
The twrp version for daisy is bugged. Backups are not working, the wifi with GSI Roms on pie stock is not working anymore as soon as twrp is installed as well.
Sent from my Phh-Treble vanilla using Tapatalk
Thanks for the replies above. @voodoojohnny
In my case it was the data partition that caused the restore to fail, vendor and system and boot all seemed to go through normally. @cd492
Based on what you say along with my own experiences and those of voovoojohnny, it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
viking777 said:
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
Click to expand...
Click to collapse
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
InfinityXDA said:
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
Click to expand...
Click to collapse
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
Click to expand...
Click to collapse
I meant it, at least for now, but maybe your post will help somebody else.
viking777 said:
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
I meant it, at least for now, but maybe your post will help somebody else.
Click to expand...
Click to collapse
Yes I didn't see that post but understand I didn't give you links to the official TWRP, I gave you the unofficial fixed TWRP which actually features SD Card Support and trust me it works completely fine I haven't had a problem yet. This took me hours upon hours to figure out what I was doing wrong.
The only specific reason you are not successfully getting TWRP is because you didn't flash the aboot.img after installing the zip.
I hope this helps you in the future!
thanks InfinityXDA for the tutorial, you should create a post just for it~
Hi!
Since the official OxygenOS Android 10 update left me less than happy, I decided to try and give a custom ROM a chance again. Had RR on my OPO a few years back so that felt like a good thing to default back to, but for OP5t. Unlocked the bootloader, got TWRP 3.3.1 installed. All good. Got RR8.1.0 for dumpling downloaded, also downloaded gApps and magisk. Transferred them over, installed the .zip's. So far so good. Booting into RR seems fine at first, but when I get to the point of backing up my data from a previous device/or skipping it, the installer freezes/loops/fails.
I assume I have the correct firmware since OxygenOS 10 works "just fine". When I try to recover stuff from an old device, I choose my old backup from yesterday, then it goes into a screen where it says "Wait a few secs..." or something of that nature. The circle around it just keeps looping. This takes only a few seconds to find the data if I'm installing OOS. So this is a dead end. If I try to pass through without anything, accounts, face unlock and all that, I get to a point of where I am supposed to setup the assistant. Whether I choose "Skip" or "Next" (as in set it up) I keep looping back 2 steps to enter pin, then set up the assistant again.
I have re-installed RR a bunch of times as it didn't work, first I had problems with "Enter device pin" which I had no clue what it was in the android setup. Cleaned it all up, installed OOS10, that worked to setup and install just fine. Cleared it all out again, tried to install RR, got past the "Enter device pin", but then it failed as mentioned above.
TL;DR: RR8.1.0 Dumpling Android setup fails when backing up from account/can't get past assistant. OOS10 works as it should.
Any clue on what the problem might be? Tried installing at least 10 times, but it didn't work. Any help is appreciated If there's just some general flaw in RR for this device/version, any other custom ROM that is to be recommended?
/Wahlmat
wahlmat said:
Hi!
Since the official OxygenOS Android 10 update left me less than happy, I decided to try and give a custom ROM a chance again. Had RR on my OPO a few years back so that felt like a good thing to default back to, but for OP5t. Unlocked the bootloader, got TWRP 3.3.1 installed. All good. Got RR8.1.0 for dumpling downloaded, also downloaded gApps and magisk. Transferred them over, installed the .zip's. So far so good. Booting into RR seems fine at first, but when I get to the point of backing up my data from a previous device/or skipping it, the installer freezes/loops/fails.
I assume I have the correct firmware since OxygenOS 10 works "just fine". When I try to recover stuff from an old device, I choose my old backup from yesterday, then it goes into a screen where it says "Wait a few secs..." or something of that nature. The circle around it just keeps looping. This takes only a few seconds to find the data if I'm installing OOS. So this is a dead end. If I try to pass through without anything, accounts, face unlock and all that, I get to a point of where I am supposed to setup the assistant. Whether I choose "Skip" or "Next" (as in set it up) I keep looping back 2 steps to enter pin, then set up the assistant again.
I have re-installed RR a bunch of times as it didn't work, first I had problems with "Enter device pin" which I had no clue what it was in the android setup. Cleaned it all up, installed OOS10, that worked to setup and install just fine. Cleared it all out again, tried to install RR, got past the "Enter device pin", but then it failed as mentioned above.
TL;DR: RR8.1.0 Dumpling Android setup fails when backing up from account/can't get past assistant. OOS10 works as it should.
Any clue on what the problem might be? Tried installing at least 10 times, but it didn't work. Any help is appreciated If there's just some general flaw in RR for this device/version, any other custom ROM that is to be recommended?
/Wahlmat
Click to expand...
Click to collapse
Maybe it's because u trying to install 8.1 ROM on pie firmware just a thought?
ireaper4592 said:
Maybe it's because u trying to install 8.1 ROM on pie firmware just a thought?
Click to expand...
Click to collapse
Could be. Tried to search for A10 firmware, but came up short (had this issue with my OPO and firmware for A7). Got AICP installed now and that seems to work.
Out of curiosity, does OnePlus release the firmware openly, or do you have to find some guy's "homemade" firmware in a future case like this?
wahlmat said:
Could be. Tried to search for A10 firmware, but came up short (had this issue with my OPO and firmware for A7). Got AICP installed now and that seems to work.
Out of curiosity, does OnePlus release the firmware openly, or do you have to find some guy's "homemade" firmware in a future case like this?
Click to expand...
Click to collapse
They have all firmwares on there sight go there and click three lines,go to support,look for device and find latest firmware download that's it
ireaper4592 said:
They have all firmwares on there sight go there and click three lines,go to support,look for device and find latest firmware download that's it
Click to expand...
Click to collapse
I actually can't seem to find it on their site.
wahlmat said:
I actually can't seem to find it on their site.
Click to expand...
Click to collapse
https://www.oneplus.com/uk/support/softwareupgrade