Unable to sideload community build - OnePlus 3 Questions & Answers

I am trying to install the latest community build , I download a latest version of 3.5.3 from OnePlus's download section.
Currently I am on 3.2.7 , not rooted and boot loader is locked. All factory setting
these are the steps
check and make sure USB debugging is on
connect the device to PC
adb reboot recovery
device goes to recovery , select language and select install from adb on my phone
checking to make sure device is recognized and authorized
adb devices
50f4f77f sideload
************************************
adb sideload Update.zip
loading: 'Update.zip'
* cannot read 'Update.zip' *
I know I am in a correct folder as I already a did a <dir> and verified update.zip is in the current folder but lets try this
adb sideload C:\adb\Update.zip
loading: 'Update.zip'
* cannot read 'Update.zip' *
:crying:
at this point I am sure there is something wrong with the zip file. so I delete it and download the 3.2.6 just to test it out and I was able to downgrade to 3.2.6 with adb sildeload. once installation was complete I tried again to download 3.5.3 and sideload it but still getting a cannot read <filename> error.
any idea what I am missing here ?
By the way , I have tried several options such as :
1- changing the location of the file from adb folder to other location
2- renaming the file
3- launching cmd prompt as an administrator and navigating to the file location

Hello,
I have a strong feeling that you are trying to flash a wrong zip file. Can you mention the size of file that you mentioned as "update.zip"?

catrawalkar said:
Hello,
I have a strong feeling that you are trying to flash a wrong zip file. Can you mention the size of file that you mentioned as "update.zip"?
Click to expand...
Click to collapse
"OnePlus3Oxygen_16_OTA_003_all_1609142002_2a17363c90cd462e.zip" is the name of the file

nima352000 said:
"OnePlus3Oxygen_16_OTA_003_all_1609142002_2a17363c90cd462e.zip" is the name of the file
Click to expand...
Click to collapse
Then why are you giving command of update.zip? You should write the name of file in the command.
Replace "update.zip" in your command to the name of file as it is.

catrawalkar said:
Then why are you giving command of update.zip? You should write the name of file in the command.
Replace "update.zip" in your command to the name of file as it is.
Click to expand...
Click to collapse
As I mentioned in my post I have already tried that this was my last attempt as many folks out here saying that "renaming" the file helped them

nima352000 said:
As I mentioned in my post I have already tried that this was my last attempt as many folks out here saying that "renaming" the file helped them
Click to expand...
Click to collapse
Can you post a screenshot of your command prompt and folder that contains zip file?

catrawalkar said:
Can you post a screenshot of your command prompt and folder that contains zip file?
Click to expand...
Click to collapse
sure , here it is

I had this issue when I tried to download the first time. The zip is corrupted. I downloaded the file again and update your adb and fastboot version. I am sure it should work fine.
---------- Post added at 08:35 AM ---------- Previous post was at 08:29 AM ----------
I also suspect the issue could be due to renaming the filename manually into update.zip and when the extension is hidden, it becomes update.zip.zip. please crosscheck to be double sure.

Reboot your computer after you download the file.
I know it sounds weird but I have to do it every time I download the community builds and I've no idea why...otherwise they give the same error. Don't rename the file either there's no need.

nima352000 said:
sure , here it is
Click to expand...
Click to collapse
There could be renaming issue. Try re-downloading file and let me know if you have resolved the issue..

Renaming the file is only for the sake of convenience. Or else you may end up giving a wrong file name by typing error when giving the sideload command as the file names are usually too long.
In this case the file should have been corrupt (not fully downloaded).

Try opening the .zip file.
If it is corrupted, the CRC will fail and it won't open.
In which case you know you have a bad download.

debasish.patra said:
I had this issue when I tried to download the first time. The zip is corrupted. I downloaded the file again and update your adb and fastboot version. I am sure it should work fine.
---------- Post added at 08:35 AM ---------- Previous post was at 08:29 AM ----------
I also suspect the issue could be due to renaming the filename manually into update.zip and when the extension is hidden, it becomes update.zip.zip. please crosscheck to be double sure.
Click to expand...
Click to collapse
Hi , I did try to reinstall the adb drivers , but I will give it a shot again. Also as far as renaming the file the file in the above screen shot is originally downloaded from OnePlus's website without renaming. >dir command shows the file extension to be correct ending with .zip not zip.zip ..
anyways I will reinstall the adb drivers again today

Roxas598 said:
Reboot your computer after you download the file.
I know it sounds weird but I have to do it every time I download the community builds and I've no idea why...otherwise they give the same error. Don't rename the file either there's no need.
Click to expand...
Click to collapse
will give this a try . download a fresh copy with original name , reboot the PC and retry ? is that the sequence you are suggesting ?

kgs1992 said:
Try opening the .zip file.
If it is corrupted, the CRC will fail and it won't open.
In which case you know you have a bad download.
Click to expand...
Click to collapse
doesn't look like that was the case . was able to open the .zip file just fine

nima352000 said:
will give this a try . download a fresh copy with original name , reboot the PC and retry ? is that the sequence you are suggesting ?
Click to expand...
Click to collapse
Yep that's it mate

debasish.patra said:
I had this issue when I tried to download the first time. The zip is corrupted. I downloaded the file again and update your adb and fastboot version. I am sure it should work fine.
---------- Post added at 08:35 AM ---------- Previous post was at 08:29 AM ----------
I also suspect the issue could be due to renaming the filename manually into update.zip and when the extension is hidden, it becomes update.zip.zip. please crosscheck to be double sure.
Click to expand...
Click to collapse
by the way may I get the link to "adb and fastboot version" which you are referring to ? just wanted to make sure I am on the right track

What version of adb are you using?
Your screen print shows 944,128 bytes whereas mine shows 1,479,680 bytes for adb.exe
eg output from the command "adb version"
Android Debug Bridge version 1.0.36
Revision 8f855a3d9b35-android
Looks like you are on:
>adb version
Android Debug Bridge version 1.0.32
Revision eac51f2bb6a8-android

Roxas598 said:
Yep that's it mate
Click to expand...
Click to collapse
it actually worked ! thanks a bunch mate !

for anybody who is having the same issue and interested what was the solution , I download a new copy of .zip file from OnePlus websire . restarted my PC and tried again and it worked . Can't make any sense of it but that was the solution

Related

Speed bump in Rooting process...

Hey guys, I am in the process of rooting my evo 4g using this method http://htcevohacks.com/htc-evo-hacks/how-to-root-htc-evo-4g-on-hboot-2-18-with-s-off/ since I have 2.18 hboot version. I have unzipped all the files from RootEvo4GNew, and the file recovery-RA-supersonic-v2.3.img does not have the .img extension on it when I unzip it to the correct folder, and when I try to flash that in the cmd prompt it says
unknown partition 'recovery-RA-supersonic-v2.3.img'
error: cannot determine image filename for 'recovery-RA-supersonic-v2.3.img
I am assuming it can't find the file because it doesn't have the extendion .img on it once extracted. Any ideas? The icon next to the file looks like a zip file and can't be opened by 7zip
See it looks like a winzip file instead of a image file
Ok so I uninstalled winzip and now just have 7zip and it now shows the file as an .img file but I am still getting the same error message when in the command prompt. What am I doing wrong? Here's another image to show you what I mean
furrycnorm said:
Ok so I uninstalled winzip and now just have 7zip and it now shows the file as an .img file but I am still getting the same error message when in the command prompt. What am I doing wrong? Here's another image to show you what I mean
Click to expand...
Click to collapse
Download one of these,it has install instructions and a few different custom recoveries to choose from,creds to Smelkus of course..... http://forum.xda-developers.com/showthread.php?t=2171460
Diablo67 said:
Download one of these,it has install instructions and a few different custom recoveries to choose from,creds to Smelkus of course..... http://forum.xda-developers.com/showthread.php?t=2171460
Click to expand...
Click to collapse
I downloaded and followed instructions, isn't working for me. It looks like the phone doesn't see the file when in bootloader, not sure if I renamed it right.
furrycnorm said:
I downloaded and followed instructions, isn't working for me. It looks like the phone doesn't see the file when in bootloader, not sure if I renamed it right.
Click to expand...
Click to collapse
Follow this http://windows.microsoft.com/en-US/windows-vista/show-or-hide-file-name-extensions to make sure the file extensions show correctly, and make sure you didn't dupe the extension.
sent from a jb ROM..... cause I'm likely testing.
Wambo_Bomb said:
Follow this http://windows.microsoft.com/en-US/windows-vista/show-or-hide-file-name-extensions to make sure the file extensions show correctly, and make sure you didn't dupe the extension.
sent from a jb ROM..... cause I'm likely testing.
Click to expand...
Click to collapse
Thanks for the advice, I think this may work as I did have one extension duped. Problem is when I run the recovery it says it's an older version than what I already have installed and asks if I want to restart the device. I also still can't get the phone to flashboot recovery recovery-RA-supersonic-v2.3.img and it still says unrecognized partition in the command prompt. Is there a way to flash this from the sc card or anything else you can think of to try?
furrycnorm said:
Thanks for the advice, I think this may work as I did have one extension duped. Problem is when I run the recovery it says it's an older version than what I already have installed and asks if I want to restart the device. I also still can't get the phone to flashboot recovery recovery-RA-supersonic-v2.3.img and it still says unrecognized partition in the command prompt. Is there a way to flash this from the sc card or anything else you can think of to try?
Click to expand...
Click to collapse
Are you trying to fastboot flash the recovery .img file to your phone? If so you need to use the command "fastboot flash recovery *insert file name here*" (without quotation marks or asterisks). The recovery img file has to be in your ADB tools folder, alstherwise, put the recovery PC36IMG.zip file in the root folder of your SD card, make sure it's named PC36IMG.zip with no extra .zip extension, and reboot your bootloader. Follow the on-screen prompts to update your recovery.
Sent from my EVO using xda premium
FinZ28 said:
Are you trying to fastboot flash the recovery .img file to your phone? If so you need to use the command "fastboot flash recovery *insert file name here*" (without quotation marks or asterisks). The recovery img file has to be in your ADB tools folder, alstherwise, put the recovery PC36IMG.zip file in the root folder of your SD card, make sure it's named PC36IMG.zip with no extra .zip extension, and reboot your bootloader. Follow the on-screen prompts to update your recovery.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
wow I am retarded, my problem the whole time was that I was typing this:
fastboot flash recovery-RA-supersonic-v2.3.img
when I should have typed this:
fastboot flash recovery recovery-RA-supersonic-v2.3.img
Thank you so much for the help, on to the next step and hopefully this works!
Ok, successfully rooted with s-off! I have read through all the guides, and am still a bit confused because most of them are from 2010 and 2011. I need to flash a rom that will work with metro-pcs. Can you guys help me with which steps I need to take? I tried to download metrodroid v4 but the download link isn't working. Will aall of the roms in this thread work with metro pcs or do I need a specific one? http://forum.xda-developers.com/showthread.php?t=2318070
Also, once I have a rom flashed, do I have to go in to a metro pcs store to get it activated (I do not currently have a metro pcs account or other metro phone) or can I get the esn activated online or by calling there 800 number?

[Q] LG Flashtool back to stock PROBLEMS!!!

I have used all drivers and two different tot files, and it works to reboot, then it fails when I try to get past the first welcome screen... Does it make a difference if the sim card is in or out???
It makes it to preactivation and set phone name, then a second or two later goes back into the reboot stage.
I made it to the settings screen and phone info, and all areas were UNKNOWN
pitbull8265 said:
I have used all drivers and two different tot files, and it works to reboot, then it fails when I try to get past the first welcome screen... Does it make a difference if the sim card is in or out???
It makes it to preactivation and set phone name, then a second or two later goes back into the reboot stage.
I made it to the settings screen and phone info, and all areas were UNKNOWN
Click to expand...
Click to collapse
I don't know what went wrong but since you don't have a reply I'll say this... I would start from scratch. Download the tot file AND dll again to a new place on your PC (like desktop). Run LG flash tool again and browse to those 2 files (flash tools likes to remember previous settings). Flash again and let us know the result. Sim card doesn't make a difference.
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware if you need it, always flashed reliably for me.
...
scottdanpor said:
I don't know what went wrong but since you don't have a reply I'll say this... I would start from scratch. Download the tot file AND dll again to a new place on your PC (like desktop). Run LG flash tool again and browse to those 2 files (flash tools likes to remember previous settings). Flash again and let us know the result. Sim card doesn't make a difference.
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware if you need it, always flashed reliably for me.
Click to expand...
Click to collapse
Ive done this.. no luck
pitbull8265 said:
Ive done this.. no luck
Click to expand...
Click to collapse
Did you get anywhere with this? Under status, is your IMEI listed as unknown? This seems like your efs partition might be messed up. Did you make a backup of it?
scottdanpor said:
Did you get anywhere with this? Under status, is your IMEI listed as unknown? This seems like your efs partition might be messed up. Did you make a backup of it?
Click to expand...
Click to collapse
I just read elsewhere that if you used ioroot you may have a backup anyways. On the computer in ioroot. You may find a couple files called, modem st1, and modem st2.
Hopefully they will speak of it. Watch this thread..,.
http://forum.xda-developers.com/showthread.php?p=51932057
@scottdanpor for the info and hopefully how to use it.
pitbull8265 said:
Ive done this.. no luck
Click to expand...
Click to collapse
Sent from my Nexus 7 using Tapatalk
secret.animal said:
I just read elsewhere that if you used ioroot you may have a backup anyways. On the computer in ioroot. You may find a couple files called, modem st1, and modem st2.
Hopefully they will speak of it. Watch this thread..,.
http://forum.xda-developers.com/showthread.php?p=51932057
@scottdanpor for the info and hopefully how to use it.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yeah but he has basically access to download mode and fastboot it seems. I haven't found a way to push files without at least recovery
Well, if he has access to stock recovery should be able to push files that way through ADB
NOPE
scottdanpor said:
Yeah but he has basically access to download mode and fastboot it seems. I haven't found a way to push files without at least recovery
Well, if he has access to stock recovery should be able to push files that way through ADB
Click to expand...
Click to collapse
it just hangs and reboots still... cant access fastboot.. tried every file available nothing is working
rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr
scottdanpor said:
Yeah but he has basically access to download mode and fastboot it seems. I haven't found a way to push files without at least recovery
Well, if he has access to stock recovery should be able to push files that way through ADB
Click to expand...
Click to collapse
I have a recovery I made using twrp saved to my pc, and I chose the option to backup my efs, so all of my info is on my pc in the backup file.
HOW can I use adb sideload or ADB to push it to my phone???
HAS TO BE DONE FROM STOCK RECOVERY ADB, as i cant even get into the ui long enough to activate usb debugging
pitbull8265 said:
I have a recovery I made using twrp saved to my pc, and I chose the option to backup my efs, so all of my info is on my pc in the backup file.
HOW can I use adb sideload or ADB to push it to my phone???
HAS TO BE DONE FROM STOCK RECOVERY ADB, as i cant even get into the ui long enough to activate usb debugging
Click to expand...
Click to collapse
It will take a bit of reading but you will learn a lot!
Here's a guide with some commands, you just need to tailor it to your needs/paths, it says Samsung but all you need are the commands.
http://forum.xda-developers.com/showthread.php?t=2141817
If you have ioroot on your computer you have ADB. Plug in your phone in recovery mode and check device manager. It's probably under "unknown" as LG-LS980. You need to right-click and select "update driver", then manually select driver. From the list, you should be able to find something like Android composite ADB device. Select that one and it should then be recognized as ADB.
Hold Shift and right click on the ioroot folder and select "Open command window here", then in cmd type "adb devices". If all is good you will get a serial number as it detects your device. Once you got this you are ready to enter commands, check that guide for the right command to push the file to: /dev/block/platform/msm_sdcc.1/by-name/
as stated by Autoprime here: http://forum.xda-developers.com/showthread.php?t=2451390
I hope that's enough info to get you going. You should type "adb shell" first in ADB so you have access to root.
---------- Post added at 09:12 AM ---------- Previous post was at 09:03 AM ----------
Oh crap... I just re-read that. I don't think this will work if your backup is from TWRP. That needs to be restored from TWRP. Do you not have a backup from ioroot? That contains the img files you need.
---------- Post added at 09:18 AM ---------- Previous post was at 09:12 AM ----------
Ok, I found this...
"Even though all TWRP backup files carry the extension .win, they are either tar archives or filesystem images. System, data, cache and .android_secure are backed up as tar archives or gnu-zipped tar archives if compression is enabled. You can rename those .win files to .tar (.tar.gz if compressed) and extract them like a regular archive. Boot and recovery partitions are backed up as .img files using dd"
from: http://forum.xda-developers.com/showthread.php?t=1694617
I couldn't find out if TWRP backs up EFS to .tar or .img. Once you figure that out you should be able to rename them to modemst1.img and modemst1.img. I just verified on mine that the files are the same size, so I would guess they are actually img files and not compressed. They should be 3MB in size.
There's a lot more info in that thread by Autoprime that should help.

[TUTORIAL] Install ROM via sideload

I know most of you already know this, but it may help others because this is very usefull for installing kitkat.
It's a pain to copy an 1,2 GB ROM to internal storage, so sideloading (installing from PC) it's lot easier and faster.
So here's the trick.
Copy the zip you want to install in "adb" folder (archiev attached)
Reboot phone in recovery mode
Optional - do your wipes
If you have CMW
Go to install zip -> install zip from sideload
If you have TWRP
Go to advanced -> ADB sideload
connect the USB cable and run START.cmd
type "adb devices" to check if your phone is recognized and connected (skip if you know everything it's ok)
type "adb sideload kitkat.zip" (replace kitkat with zip's name)
Notes:
Ofc you need USB drivers
Ive tried that a couple times but always i get a "cannot read kitkat.zip" thing, any idea why?
Sent from my LG-E975 using XDA Premium 4 mobile app
mastor10 said:
Ive tried that a couple times but always i get a "cannot read kitkat.zip" thing, any idea why?
Click to expand...
Click to collapse
Umm... Did you replace "kitkat.zip" with the actual name of your zip file (or rename your zip to "kitkat.zip")? I know it might be a very stupid question, but I can only read your post, not your mind...
kt-Froggy said:
Umm... Did you replace "kitkat.zip" with the actual name of your zip file (or rename your zip to "kitkat.zip")? I know it might be a very stupid question, but I can only read your post, not your mind...
Click to expand...
Click to collapse
Of course man, all of the roms ive flashed was through sideload
mastor10 said:
Of course man, all of the roms ive flashed was through sideload
Click to expand...
Click to collapse
Make a screenshot of what you're doing and error you get, this way will be easier for both.
roscatel said:
Make a screenshot of what you're doing and error you get, this way will be easier for both.
Click to expand...
Click to collapse
there you go
i changed the name to zip but norhing happens
mastor10 said:
there you go
i changed the name to zip but norhing happens
Click to expand...
Click to collapse
First, there is no way for a rom to use ".rar" extension. After, error means that the file couldn't be read (missing or corrupted). Also you may try my method which doesn't need android SDK, so there is no complications with wrong paths or such.
roscatel said:
First, there is no way for a rom to use ".rar" extension. After, error means that the file couldn't be read (missing or corrupted). Also you may try my method which doesn't need android SDK, so there is no complications with wrong paths or such.
Click to expand...
Click to collapse
yes i know, but in there the rom is in rar http://forum.xda-developers.com/showthread.php?t=2762171
so i changed the rar to zip, also i downloaded the file 3 times and the same happens, ill try with your adb and see
also the others zips i flash through sideload from sdk works just fine, only in this rom i get the error
edit, nope the same happens
mastor10 said:
yes i know, but in there the rom is in rar http://forum.xda-developers.com/showthread.php?t=2762171
so i changed the rar to zip, also i downloaded the file 3 times and the same happens, ill try with your adb and see
also the others zips i flash through sideload from sdk works just fine, only in this rom i get the error
edit, nope the same happens
Click to expand...
Click to collapse
Look at the screen I've attached. Are you sure your zip it's not the same have you checked it? I've highlighted the rom itself.
roscatel said:
Look at the screen I've attached. Are you sure your zip it's not the same have you checked it? I've highlighted the rom itself.
Click to expand...
Click to collapse
this is what i download
https://drive.google.com/uc?id=0BxtwB2oE42pDNFJsaGJ3ODNkWGM&export=download
from the topic i mention above, its the same, i rename it to a smaller name though
mastor10 said:
this is what i download
https://drive.google.com/uc?id=0BxtwB2oE42pDNFJsaGJ3ODNkWGM&export=download
from the topic i mention above, its the same, i rename it to a smaller name though
Click to expand...
Click to collapse
Ok then simply extract "VDT-V20..." from that archieve. That's the zip you have to install via sideload!
roscatel said:
Ok then simply extract "VDT-V20..." from that archieve. That's the zip you have to install via sideload!
Click to expand...
Click to collapse
this is whats inside the zip i download
mastor10 said:
this is whats inside the zip i download
Click to expand...
Click to collapse
It looks to me that your screenshot is showing contents of a ZIP inside a RAR. What @roscatel means, you should extract the ZIP from the RAR that you downloaded -- it's actually an archive packed inside another archive. After that, flash the ZIP you just extracted using any method (sideload, or from recovery as usual). Do NOT rename RAR to ZIP -- it doesn't make sense, and will most definitely NOT work.
kt-Froggy said:
It looks to me that your screenshot is showing contents of a ZIP inside a RAR. What @roscatel means, you should extract the ZIP from the RAR that you downloaded -- it's actually an archive packed inside another archive. After that, flash the ZIP you just extracted using any method (sideload, or from recovery as usual). Do NOT rename RAR to ZIP -- it doesn't make sense, and will most definitely NOT work.
Click to expand...
Click to collapse
hi my pc known my device but when i write adb sideload ...zip foul (stand) 0% and i watting 15 minuts for process but nothing happening . plz help me . my device is xperia tx.. plzzzzzzzzzzzzz
install the last TWRP (flash it via bootloader), same process by opening commande window in the folder (shift+right click: then open command) and tiping command: fastboot flash recovery (name of the file).img (like that: exemple: fastboot flash recovery lastTWRP.img)
it autorize MTP transfer, so you cas access your internal storage and copy the zip file
or retrieve backups from your phone
I'm using and side load on my lge
LM-x210MA an I keep getting these different errors do I need to flash more than a twrp.imf what about sys.img root.img root-boot.img this is all a lot to take in as a first timer go easy I'm not trolling just trying to learn

Offical update to Nougat for N920A step by step. Enjoy !!!!

From The Moderator Oka1 - There are no viable links in this OP therefore, I am closing
Thanks
OK. As i promise to some nice people here, then i get it so here it is.
ADB sideload only update S4CQB2-to-U4EQC6. 1.41 GB file seems to me like nougat update.
Nougat Update Here S4CQB2-to-U4EQC6
MD5 checksum : 903aa5c5f26f430133481c4a2cfcdb69
Thanks for ABD instruction @ColoMtn
Make sure you know how to ADB sideload. I'm not responsible for any damage to your phone.
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and file is ready for ADB as you download SS-N920AUCS4CQB2-to-U4EQC6-UP.zip
3. Shutdown your phone
4. Enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd
in my case: cd C:\Users\Norbarb\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCS4CQB2-to-U4EQC6-UP.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Norbarb\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCS4CQB2-to-U4EQC6-UP.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Nougat
EDIT: Please post mirrors if you can. Thanks
For who may need it this is S4CQA1 to U4QC6 update. File is around 1.5 GB and MD5 is 23d4d4c58330b618001e76fc468732d9
Congratulations! Hopefully 928a will have it soon
vista1984 said:
Congratulations! Hopefully 928a will have it soon
Click to expand...
Click to collapse
You are talking about G928A ? I check but only what i get is security update to 4CQB1. If you want i can post it on S6E+ forum.
I just wanted to thank you for this, going to do it now!!!! This day keeps getting better and better!!!!!
norbarb said:
OK. As i promise to some nice people here, then i get it so here it is.
ADB sideload only update S4CQB2-to-U4EQC5. 1.41 GB file seems to me like nougat update.
Nougat Update Here
Thanks for ABD instruction @ColoMtn
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and file is ready for ADB as you download SS-N920AUCS4CQB2-to-U4EQC5.zip
3. Shutdown your phone
4. Enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd
in my case: cd C:\Users\Norbarb\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCS4CQB2-to-U4EQC5.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Norbarb\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCS4CQB2-to-U4EQC5.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Nougat
EDIT: Please post mirrors if you can. Thanks
Click to expand...
Click to collapse
Can anyone show a screen shot of the "About Device" section of the phone settings after applying this update? Thank you in advance!
Have you tried it yourself?I got this in recovery when adb it.
" failed to verify whole-file signature", "signature verification failed
"E:failed to verify whole-life signature" "E:signature verification failed"
Installation aborted.
ifanr said:
Have you tried it yourself?I got this in recovery when adb it.
" failed to verify whole-file signature", "signature verification failed
"E:failed to verify whole-life signature" "E:signature verification failed"
Installation aborted.
Click to expand...
Click to collapse
On what firmware currently are you? This update is only from baseband N920AUCS4CQB2. Also you may have corrupted recovery. To fix this you have to ODIN back to latest firmware and try again.
Anyway just in case i'm uploading raw file w/o .zip extension to another place.
norbarb said:
On what firmware currently are you? This update is only from baseband N920AUCS4CQB2. Also you may have corrupted recovery. To fix this you have to ODIN back to latest firmware and try again.
Anyway just in case i'm uploading raw file w/o .zip extension to another place.
Click to expand...
Click to collapse
It's S4CQB2.Could you please give me the md5?And I'm gonna to flash the recovery to work it out.
ifanr said:
It's S4CQB2.Could you please give me the md5?And I'm gonna to flash the recovery to work it out.
Click to expand...
Click to collapse
I post it MD5 in first post.
norbarb said:
I post it MD5 in first post.
Click to expand...
Click to collapse
Matched.I'll try some other ways to work it out.Tks.
ifanr said:
Matched.I'll try some other ways to work it out.Tks.
Click to expand...
Click to collapse
You may try removing .zip extension and try again. Sometimes works
i get cannot read SS-N920AUCS4CQB2-to-U4EQC5.zip
jerrycoffman45 said:
i get cannot read SS-N920AUCS4CQB2-to-U4EQC5.zip
Click to expand...
Click to collapse
Two resons :
1. corrupted file
2. file in wrong place
norbarb said:
Two resons :
1. corrupted file
2. file in wrong place
Click to expand...
Click to collapse
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
norbarb said:
Two resons :
1. corrupted file
2. file in wrong place
Click to expand...
Click to collapse
thats what i thought too but md5 checks and the files in the same folder as adb and fastboot
ifanr said:
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
Click to expand...
Click to collapse
I post it link to raw file try other one or re-download.
ifanr said:
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
Click to expand...
Click to collapse
jerrycoffman45 said:
thats what i thought too but md5 checks and the files in the same folder as adb and fastboot
Click to expand...
Click to collapse
Most of the time it is problem do to recovery. You may have to ODIN firmware back and try again.
Anybody flash this file w/o problems? I'm sorry but only Note 5 i have it is my wife's work phone and i can't mess with it.
norbarb said:
Most of the time it is problem do to recovery. You may have to ODIN firmware back and try again.
Anybody flash this file w/o problems? I'm sorry but only Note 5 i have it is my wife's work phone and i can't mess with it.
Click to expand...
Click to collapse
I'll try it. Looks I already messed up my phone.Lucky it's weekend.lol.
ifanr said:
I'll try it. Looks I already messed up my phone.Lucky it's weekend.lol.
Click to expand...
Click to collapse
ALL WHO TRY PLEASE STOP. Seems like uploaded file got corrupted. I'm uploading once more
norbarb said:
You are talking about G928A ? I check but only what i get is security update to 4CQB1. If you want i can post it on S6E+ forum.
Click to expand...
Click to collapse
It's very thoughtful of you. If you have time please post it at your convenience.

I think i got my phone brick please help anyone

Guys i tried to install MIUI 7 on my amazon firephone i downloaded all the files and did a reboot in recover all going good then when i tried to install miui files it got stuck in the recovery mood and i restarted the phone and now it is stucked on amazon logo nothing doing else even i tried wipe data twice from hard reset mood please help did it brick my phone? help me to solve this.
hamza said:
Guys i tried to install MIUI 7 on my amazon firephone i downloaded all the files and did a reboot in recover all going good then when i tried to install miui files it got stuck in the recovery mood and i restarted the phone and now it is stucked on amazon logo nothing doing else even i tried wipe data twice from hard reset mood please help did it brick my phone? help me to solve this.
Click to expand...
Click to collapse
if you can acces to recovery, the only thing you can do is adb sideload ...bin
with an original stock ROM for your fire phone
(.bin must be the extension of the file, that you can get from official amazon site)
pipataki said:
if you can acces to recovery, the only thing you can do is adb sideload ...bin
with an original stock ROM for your fire phone
(.bin must be the extension of the file, that you can get from official amazon site)
Click to expand...
Click to collapse
Thanks a lot for your help after starting this thread i did a lot of research about it and i got the same solution from Xda and i tried it is same manner as some nice people posted it on this site but now another issue is being created automatically which is adb sideload command is not working when i write the following command
adb sideload "filename.bin"
its shows me an error "*cannot read filename.bin"
i tried it by changing the file name as "update.bin" and also tried it same file name which i downloaded from the amazon site. Please help me to resolve issue. Thanks again.
hamza said:
Thanks a lot for your help after starting this thread i did a lot of research about it and i got the same solution from Xda and i tried it is same manner as some nice people posted it on this site but now another issue is being created automatically which is adb sideload command is not working when i write the following command
adb sideload "filename.bin"
its shows me an error "*cannot read filename.bin"
i tried it by changing the file name as "update.bin" and also tried it same file name which i downloaded from the amazon site. Please help me to resolve issue. Thanks again.
Click to expand...
Click to collapse
filename is the name of file... <file.bin> you have to download that file from amazon or see in index thread
pipataki said:
filename is the name of file... <file.bin> you have to download that file from amazon or see in index thread
Click to expand...
Click to collapse
yeah i downloaded the file from amazon site and its original name was "update-kindle-35.4.6.6_user_466001420.bin" but i changed it to "update.bin" and it didn't work.
hamza said:
yeah i downloaded the file from amazon site and its original name was "update-kindle-35.4.6.6_user_466001420.bin" but i changed it to "update.bin" and it didn't work.
Click to expand...
Click to collapse
its still not working still showing that error "cannot read file.bin"
hamza said:
its still not working still showing that error "cannot read file.bin"
Click to expand...
Click to collapse
If you have the device via adb (with adb devices command) you can do an adb sideload sure... so in your case I supose, the file is corrupted... better dont rename it... but, if you can connect via adb, you can sideload sure...
pipataki said:
If you have the device via adb (with adb devices command) you can do an adb sideload sure... so in your case I supose, the file is corrupted... better dont rename it... but, if you can connect via adb, you can sideload sure...
Click to expand...
Click to collapse
no file was not corrupted because i downloaded another file from another site and it is showing same error i really cant understand what is happening. Is there any administration need?
hamza said:
no file was not corrupted because i downloaded another file from another site and it is showing same error i really cant understand what is happening. Is there any administration need?
Click to expand...
Click to collapse
did you do adb devices first?... first you have to know if adb can connet with the device... that will be listed with that command... adb devices
if you want send an screenshot with the result of making adb devices
Try to sideload what version of fire os you had before MIUI upgrade. If you had fireos 4.6.6, sideload 4.6.6, if you had 3.6.5 sideload 3.6.5
ozan2 said:
Try to sideload what version of fire os you had before MIUI upgrade. If you had fireos 4.6.6, sideload 4.6.6, if you had 3.6.5 sideload 3.6.5
Click to expand...
Click to collapse
i was having 4.6.6 and i sideloaded this version i am shocked that all things i am doing are totally good but why this error is occuring
hamza said:
i was having 4.6.6 and i sideloaded this version i am shocked that all things i am doing are totally good but why this error is occuring
Click to expand...
Click to collapse
I think that here in my computer I have the original update of Stock Rom, If you want I can upload it to my shared folder...
(left 3 hours and 5 minutes, maybe)...
to be sure that the upload and the download then is rigth, I tell you the exactly weight of file...
1314263238 bytes, you can test if the file you had has the same weight...
pipataki said:
I think that here in my computer I have the original update of Stock Rom, If you want I can upload it to my shared folder...
(left 3 hours and 5 minutes, maybe)...
to be sure that the upload and the download then is rigth, I tell you the exactly weight of file...
1314263238 bytes, you can test if the file you had has the same weight...
Click to expand...
Click to collapse
Size of my file is 1.2 GBs which is approximately equal to your file as you told me. I actually download it from amazon original site not any third party site but yeah upload it and please give me the link i will surely be thankful to you. I really appreciate your help and really happy to be new here at Xda developer.
hamza said:
Size of my file is 1.2 GBs which is approximately equal to your file as you told me. I actually download it from amazon original site not any third party site but yeah upload it and please give me the link i will surely be thankful to you. I really appreciate your help and really happy to be new here at Xda developer.
Click to expand...
Click to collapse
is uploaded totally...
the url of shared folder is in my Lollipop thread...
Are you accesing sideload by recovery?...
sideload only works invoked in recovey of the phone, in safestrap or in stock recovery
pipataki said:
is uploaded totally...
the url of shared folder is in my Lollipop thread...
Are you accesing sideload by recovery?...
sideload only works invoked in recovey of the phone, in safestrap or in stock recovery
Click to expand...
Click to collapse
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
hamza said:
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
Click to expand...
Click to collapse
Try using another wire and/or another port and/or another file... (the original stock that I had is in my shared folder, that one for exemple or any other one)... I hope you could relive it...
pipataki said:
Try using another wire and/or another port and/or another file... (the original stock that I had is in my shared folder, that one for exemple or any other one)... I hope you could relive it...
Click to expand...
Click to collapse
Thank You so much for your such response got it okay the problem was i didn't unblock the update file which dont know earlier but as you reffer me another link i worked on it and i got my phone back. Once again thank you so much it was really nice to be here. I will suggest all my friends your site.
hamza said:
Thank You so much for your such response got it okay the problem was i didn't unblock the update file which dont know earlier but as you reffer me another link i worked on it and i got my phone back. Once again thank you so much it was really nice to be here. I will suggest all my friends your site.
Click to expand...
Click to collapse
you can go to mobile shop and it will cost only 200 to 300 rupee for software, i also had this issue (soft brick) then i tried alot but finally i go to mobile shop and install the software ..
hamza said:
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
Click to expand...
Click to collapse
Hello,
This may be a stupid question but did you specify the proper path? ie: c:\'filename"
just a shot, good luck
slim1001 said:
Hello,
This may be a stupid question but did you specify the proper path? ie: c:\'filename"
just a shot, good luck
Click to expand...
Click to collapse
Yes man, his phone is recovered and I had this error, solution for "cannot read" is here: https://forum.xda-developers.com/fire-phone/help/adb-sideload-error-read-t3634246

Categories

Resources