Related
Any adaptors that will allow me to use proper 3.5 inch headphone jack in place of the mini USB ones ( i dont like the in ear phones) checked ebay and couldnt see anything?
you want get one of these http://www.expansys.com/p.aspx?i=142090 - Mike
Ouch, that thing is both horribly badly designed and prohibitively expensive- it's going to stick out what looks like an inch by itself, most headphone plugs will add another inch on top of that- I need something that fits flush with the bottom of the phone (comes out at a right angle) AND supplies an input for the charger. One can only dream!
The orbit would make a great on-mains Wifi internet radio if such a gubbin existed- hook up some speakers, start TCPMP, sorted!
in which case if you don't like wires stop messing around and get a set of A2DP compatible headphones - the quality is very good, but far more costly than a cable addaptor - the choice is yours - Mike
Might have been worth while if I didn't use an iPod for all my portable audio needs- have you seen any A2DP compatible speakers around?
Looks like there are hacks out there, but no official products, the combination really would just turn the Orbit into an incredibly expensive Wifi radio! But where's the fun in just going out and buying a proper one!
Have a look at the products made by Parrot there are a few Bluetooth audio add on boxes, I fail to see the relevance to WiFi?? as the A2DP profile is Bluetooth - it even works on the T-Mobile MDA-CIII which has no WiFi - Mike
I say wifi radio because I listen to internet radio stations around the house using the Orbit, and the ol' tinternet comes via the wifi doohickey!
A2DP is, of course, a bluetooth profile and would be the method over which I get decent sounding audio from the Orbit to some speakers whilst still having the Orbit plugged into mains so the battery doesn't get sucked dry... that said I think the Orbit will last a good few hours streaming internet radio, although I have yet to put that to the test.
My other solution would be, as mentioned above, an adaptor that allows both the charger AND headset to be plugged in- I can't see this as being technically impossible.
With a brief cursory investigation I have discovered, I think, that the headset uses a proprietary 6-pin connection on the opposite side of the mini-usb connector. The headphones do not use the 4-pin standard mini-usb connector on the other side, but a connector that uses both should be reasonably simple to produce. Ergo it should be childs play for a third party to produce an Artemis dock that contains not only a connection to USB but a standard 3.5mm amplified microphone socket alongside a standard 3.5mm amplified stero audio jack... not to mention a button on the front of the dock for picking up calls and a volume slider if you really wanted them.
Call me crazy, but I want one of those!
You could try this
http://www.expansys.com/htc/p_htc_item.aspx?i=145066
Might do the trick even if it is a bit long
Rich
Dear lord! You've made my day! Hmmm, a little jiggery pokery and I might even be able to incorporate that into a dock but it'll be fantastic for charging and listening to net radio at work- takes that little extra load off my desktop PC.
Cheers!
Glad I could help
richiev4 said:
You could try this
http://www.expansys.com/htc/p_htc_item.aspx?i=145066
Might do the trick even if it is a bit long
Rich
Click to expand...
Click to collapse
Hi,
Does anyone know if the above would work with a set of mini stereo speakers with a 3.5mm headphone jack (like the walkman speakers i used to have, back in the day...) to listen to the FM radio while charging the phone from mains? Or would you still need the headphones plugged into get any FM reception?
Daft question maybe, but I wondered whether the device would just use the speaker wires as an antenna instead of the headphone wires?
It will work fine, I am going to use mine to connect my orbit to my home stereo and charge it at the same time.
Rich
2.5mm 3 pole jack plug
Hi,
Anybody know of an Artemis mini usb to 2.5mm 3 pole jack plug adapter which allows the connection to deliver audio and microphone capability ?
I would like to connet my Artemis/Orbit to the Autocom intercom system on my motorcycle . This uses a lead with a 2.5mm jack plug at the phone end and a 3.5mm jack at the Autocom system end. Both are 3 pole.
Thanks
P.S. hope you don't mind me jumping in your postings
http://www.expansys.com/s.aspx
try doing a search for "2.5mm"
A very good Items for the Artemis on EbaY :
look :
http://cgi.ebay.fr/FOR-ORANGE-SPV-E...ryZ14419QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
2.5mm 3 pole jack plug adatper
I think I've found exactly what I'm looking for at:
http://igonemobile.com/products/html/61315310.html
I've got one on order and I'll let you know if it works.
cegmawr said:
Hi,
Anybody know of an Artemis mini usb to 2.5mm 3 pole jack plug adapter which allows the connection to deliver audio and microphone capability ?
I would like to connet my Artemis/Orbit to the Autocom intercom system on my motorcycle . This uses a lead with a 2.5mm jack plug at the phone end and a 3.5mm jack at the Autocom system end. Both are 3 pole.
Thanks
P.S. hope you don't mind me jumping in your postings
Click to expand...
Click to collapse
Is this so you can listen to music from the Orbit? I've had difficulty on my bike with this...music cuts out and wont restart after phone call is over. In the end, I bought the Autocom bluetooth dongle and now bluetooth the Orbit to the bike. I get phone calls and GPS just fine, but I use a wired iPod for music.
cegmawr said:
I think I've found exactly what I'm looking for at:
http://igonemobile.com/products/html/61315310.html
I've got one on order and I'll let you know if it works.
Click to expand...
Click to collapse
Does this support the Artemis? It isn't in the list....
There was a posting for the mini USB PinOut some Time ago. Look in the wiki Section to find it. Here is what they showed up with.
Maybe This will Help someone to build their own Adapter or whatsoever.
Greetings
Jabami
so what was the general concensus with using Autocom? Did the 2.5mm jack work?
I want to avoid using the bluetooth option on autocom, since I might just as well go for a Scala bluetooth headset instead if the jack doesnt work...
I was listening to music in my car today with my Sprint TP2 hooked up via the 3.5mm audio jack. When I disconnected the phone from the jack, the phone remained in 'headphone mode'. I knew it was in headphone mode still because it displays the little headphone icon on top and I could not hear any audio unless I reconnected the 3.5mm jack. So basically, I can't call anybody from my phone right now unless I hook it up to some speakers via the 3.5mm jack. That or use my BT headset.
Things I have tried to fix the phone;
- Unplugged and replugged in the 3.5mm stereo jack numerous times.*
- Soft reset
- Removed battery for 30 seconds and restarted
- Connected BlueTooth stereo headset and disconnected
* Extra weirdness; Gives me a voice commander error when I reconnect the jack. Voice Commander is not even enabled.
Nothing worked. So I just did a backup of my phone and I'm going to attempt a hard reset. We'll see if that fixes it.
Update: Right after I posted this thread, I tried plugging in several different devices with 3.5mm jacks and the headphone icon disappeared. However, I still did not have any audio. So I did a soft reset and surprise surprise... audio is back!!!
Anybody else encounter this bug? I'm not sure if it's a software or hardware bug, but it's definitely a bug.
guys, do you mean you have already have the 3.5mm specification tp2 ?
i didn't see it yet..
sounds like a hardware issue? especially if the soft reset did not resolve the issue...
czbenson said:
guys, do you mean you have already have the 3.5mm specification tp2 ?
i didn't see it yet..
Click to expand...
Click to collapse
Sprint and Verizon versions of TP2 have a integrated 3.5mm jack.
I just had the same problem being stuck in headset mode
I tried a soft reset with no luck so I was pretty sure it was something physically wrong. Instead of plugging my headset all the way back in and taking it out, I used the tip of the plug (like a Q-tip, 1/4 of the way in) to see if there were any sensors or metal still depressed and after a few light sweeps, the headset mode icon disappeared. Keeping my fingers crossed, I didn't use the 3.5mm jack for the rest of the night and I was able to use my headset and removed it without a problem this morning.
Ultimately this is most likely a physical issue, but I'd rather not send my phone in for a replacement (even though this would probably qualify as a manufacturer defect). Hope this helps if anyone experiences this in the future.
sniczz said:
I tried a soft reset with no luck so I was pretty sure it was something physically wrong. Instead of plugging my headset all the way back in and taking it out, I used the tip of the plug (like a Q-tip, 1/4 of the way in) to see if there were any sensors or metal still depressed and after a few light sweeps, the headset mode icon disappeared. Keeping my fingers crossed, I didn't use the 3.5mm jack for the rest of the night and I was able to use my headset and removed it without a problem this morning.
Ultimately this is most likely a physical issue, but I'd rather not send my phone in for a replacement (even though this would probably qualify as a manufacturer defect). Hope this helps if anyone experiences this in the future.
Click to expand...
Click to collapse
It is a hardware issue and is common to most 3.5mm jacks. I had also experienced this last year with my Treo Pro and since I really wanted to know the problem, I opened up my phone and voided all warranties. Inside the 3.5mm jack there's a lever type copper that bends to make contact with another copper metal, some kind of switch that's supposed to connect and disconnect the contact between these 2 metal pieces whenever a head 3.5mm plug is inserted.
What happened is when you disconnected the plug, the metal that's supposed to bend back to it's original position never did. That's why it's permanently stucked in headset mode because the phone thinks the plug is still inside. This probably happens due to age and possibly has something to do with moisture and rust, not to mention that copper is highly malleable.
Sad to say that until now this technology hasn't changed and is still being widely used. Hopefully someone will give this issue a real solution.
I had this problem recently and took a dry q tip and rubbed it back and forth across the little pin on the bottom of the headphone jack until it cleared up the problem.
Does anyone know if a USB to 3.5mm headphone jack adapter works on the CDMA tp2? I'd really like to use regular headphones but don't want to jeopardize getting my phone stuck in headphone mode.
Drache said:
I had this problem recently and took a dry q tip and rubbed it back and forth across the little pin on the bottom of the headphone jack until it cleared up the problem.
Does anyone know if a USB to 3.5mm headphone jack adapter works on the CDMA tp2? I'd really like to use regular headphones but don't want to jeopardize getting my phone stuck in headphone mode.
Click to expand...
Click to collapse
Yes, the USB headphone adapter works on the CDMA versions. If you plug in a second headphone set to the other open port, which ever one was connected lastly will be the one to have sound.
Fixed the problem!
I had to disassemble the phone, voiding the already expired warranty and solder the contacts together on the audio jack. I can't use a 3.5 mm jack anymore, but I can at least use the phone now without always using a bluetooth. I'll get a usb adapter for when I want to listen to music.
Here is a picture of the contacts I soldered. I used a 20 w soldering iron, I wouldn't use anything larger.
Drache said:
I had to disassemble the phone, voiding the already expired warranty and solder the contacts together on the audio jack. I can't use a 3.5 mm jack anymore, but I can at least use the phone now without always using a bluetooth. I'll get a usb adapter for when I want to listen to music.
Here is a picture of the contacts I soldered. I used a 20 w soldering iron, I wouldn't use anything larger.
Click to expand...
Click to collapse
i would hate to do this on my vibrant lol, media sound recently gave out on me after unplugging the headphone. this sucks. id look around for replacement parts..til then.. gotta get busy with the q tips til i get it to work.
Hi guys,
I was wondering if you could help me out some? A few days ago, out of nowhere seemingly, the right channel of my headphone jack on my GNex stopped working. I've checked it, and it's entirely clean, and I've cleaned the contact with rubbing alcohol. I can get the right ear to work again if I push the headphones to the right. I know for sure it's not the headphones I'm using either, as they work on other devices, and I have the same issue if I use other headphones too.
The phone is out of warranty, so I can't send it back.
I was wondering if there is a micro usb work around for this. I know you can get Micro USB to 3.5mm adapters, but I don't know if they work on android phones, or even the Galaxy Nexus specifically.
If anybody could give me a hand, your help would be much appreciated.
Thanks.
Did you try a different rom/kernel? Some kernels have broken the headphone jack for me in the past so its worth consideration since you don't have a lot of options.
It's stock, and nothing about the device has changed since it was working. I think it may have been the earphones being yanked out of the phone when they got caught.
My previous phone (droid x2) had a failing headphone jack, so I bought this http://www.amazon.com/gp/aw/d/B005OW4AZK/ref=mp_s_a_1?qid=1357612799&sr=8-1&pi=SL75
Even though my new galaxy nexus has a perfectly working headphone jack, I still use the jabra street 2 about 90% of the time. It's great at the gym also. I can just leave my phone in my bag and only have to carry around a device the size of an ipod nano.
Cheers. That'll work if I can't use a microUSB to 3.5mm adapter.
Does anyone know there are any of those that work with the GNex?
OK. So 2 years ago I saw a thread on the Nexus 7 tablet forums where someone essentially turn it into a car deck. At the time it was complicated, convoluted and buggy to say the least. Since then its been a thought exercise to make this work. How I wanted it to work. This is what I wanted:
Simple plug&play. One USB connection to carry high quality audio out from the device while still allowing it to charge. This is the most difficult. On the Nexus 7 it required a special kernel and plus the accessories had to be connected in the right sequence. Not exactly the one action set up I was going for.
The easy way to accomplish this was to use a standard USB charger and then use the headphone jack to send audio to the Aux input of the stereo. Great in theory! However the phones/tablets I have used always allowed alternator whine into the sound. Not ideal either.
Third common way is to use bluetooth audio. My Pioneer deck does support this. But we all know the quality of the sound from this is OK at best. Play some ripping guitar or something melodic and you can really hear the compression (watery, slurred "S"s sound). Not good enough for me.
Now when I had first read about this concept I started accumulating various adapters and parts to play with. First was a Behringer 202 External DAC. Its low cost but had decent reviews. Perfect for my installation. Plus the added benefit of several output format options, so a deck with an optical input could also be used if yours has one. With this I got a simple USB OTG with the Micro USB charger Y-cable. The one that has a standard female USB, the charger connection and the one to the device. Now this whole thing never worked properly. I ended up using the OTG cable with the DAC, but on my home stereo where I could place a Qi Pad under the Nexus (and my S4 before) to charge and the DAC for audio. At least I was using what I spent money on. Just not the way I wanted.
Fast forward to yesterday morning. I have had my Nexus 5 for a few months but had not tried this set up. The fussing with kernels on other devices and units over the years had me giving up. But I figured why not try with the DAC and standard charger connected (they were just sitting there after all). Low and behold it worked! And I mean perfectly! It was a big light had been turned on and the world was beautiful! Then I tried my M8 and it failed......but the Nexus 5 for the win! Oh, and even when connected to the power the DAC turned off when I disconnected the phone. So it shouldn't drain my truck's battery (though I parked on a hill tonight just in case!).
So! Here is my car installation that I was finally able to complete. I have included photos of the installation and the parts I used. It's in a list format that I hope follows the pictures. it will take me a post or three to get it all in! So bear with me.
Ingredients:
Nexus 5 (I am running Liquid Smooth for my ROM, I have not tested it on other ROMs at the time of this post).
External DAC. Like the Behringer 202 I used, but I would assume most would work.
USB OTG and Charging Cable
RCA to 3.5mm headset adapter.
Standard car charger. I have a Belkin 1A one that works like a charm. In theory you could use the USB on the stereo if included, but you may not charge reliably.
Standard USB to Micro USB cable
iBolt xDockPro for the HTC. This is optional, but i like the iBolt and their right angled USB is the right way for the Nexus. Which made the set up cleaner.
Car Home Ultra from the Play Store
So. The first photo shows all the stuff I used (minus the car deck and truck).
Second you will see I am in fact using the HTC Dock
Next is the DAC I used
Followed by the adapter cable
The the RCA adapter
The before picture. The sticky pad for the mount was there cause I was already using my iBolt with just a charger tucked in.
This one you will see I have taken the y-cable and connected it to the iBolt adapter. My dash had the room for this, you may need an extension as the y-cable is really short!
Dash is coming apart!
To be continued (I can only post so many pics at once!
Part Deux!
So the next photo shows my deck's AUX input. Now I bought this unit because it had a rear jack. So connected the headphone plug into the AUX jack.
These next four pictures are just to show which power supply I used and how the USB cable is run up to the y-adapter. Now it would be possible to use your stereos USB for power if equiped. I didn't for two reasons. First, the phone/stereo may think your connecting a flash drive (both unit could be trying to be the "host"). Second the stereo may not put out enough amperage to run both the phone and the connected DAC. So I just went with the separate supply. Plus its easy to disconnect it should I need too.
This is me connecting the DAC. Now I wanted to show this particular step as you can see the power light is NOT lit even when connected to vehicle power.
RCA cable is now connected to the DAC.
The set up all buttoned up!
To be continued.....
Trio!
This post is more about the proof of concept and the Car home Setup. Here it is!
Basically once the hardware was all set (1 & 2) I fired it up, and used Play Music (and others) making sure Bluetooth was NOT paired yet. Sounds AWESOME! Makes a night and day difference! Then I paired it for hands free while making sure the media wasn't connecting. Now went into Car Home Ultra and just set it to launch with the my stereo's bluetooth connection. My only next goal I need to finish is to get an NFC tag to control Bluetooth on the iBolt. Car Home is set to turn WiFi off automatically when its running, but my set up is reliant on BT running all the time (or have me remember to turn it on/off, but defeats my plug'n'play concept).
That's the gist of it. If you would like more details or suggestions please let me know!
So it's not just my Ford Fiesta that sends lots of noise to the charger? I am a little relieved, but it sucks to find out that this is somehow a "standard"...
Nice setup there!
daniel_loft said:
So it's not just my Ford Fiesta that sends lots of noise to the charger? I am a little relieved, but it sucks to find out that this is somehow a "standard"...
Nice setup there!
Click to expand...
Click to collapse
There is a fix. They make something called a "ground loop isolator" that can usually fix the noise generated from you alternator. Here is an example, quick google search brought it up. http://www.amazon.com/PAC-SNI-1-3-5..._sim_pc_3?ie=UTF8&refRID=1FEVW0RPFQ5W3V742E6G
You could put a more temporary/portable set up like mine, wouldn't be hard if your still having issues. Put all the parts together, stuff it all in an old cassette or floppy disk case with a few holes for the cables to stick out of.
Yeah, now the challenge is to find ways to make it work on more devices. It's really unfortunate that the M8 doesn't on Sense based ROMs (I plan on trying a GPE ROM in a few days to see if that makes a difference).
And I may now invest in a proper proclip mount so it's not up on the dash like that. But it works like a hot damn as is for now. Even with LTE on, display always on and streaming audio it charges, though pretty slow. Still. Better than not at all. And I can always turn the screen off if I wanted to give it more juice.
I have my Nexus 5 w/o the case using an iBolt mount I already had and a cheap qi charger and works great.
Nice Setup... I was actually looking for something like this. Thanks for posting
There are a lot of microUSB to USB + aux splitters on amazon for the Samsung Galaxy phones. Would these have worked all the same? Or does the Nexus 5 not have a docking capability that would sense the plug?
For those that don't know BlackBerry sells a blutooth adapter that uses power from the usb charging port on your after market stereo. I use it on mine. This thing is crazy small I hide it in the gap behind my stereo and the reception is good you have around a 10ft radius depending on where you hid your dongle.
http://shop.crackberry.com/blackberry-music-gateway/9A172A11438.htm
Nice I see you have a Colorado. I have a Nexus 7 in mine. I can say that after hours and days of troubleshooting ground noise I could not get rid of it. I had to use a ground loop isolator
Sent from my Nexus 5 using XDA Free mobile app
Hello Mi6 Owners
Im quite happy with my Mi6, but ive noticed something which is very bad.. Since Mi6 doesnt have a headphone jack it ships with an adapter.. Well I've lost that original adapter, and then a few days after i lost it ordered an replacement.. That replacememt worked for a few days, but the cable on that one was pretty flimsy, so it kinda broke amd i returned it.. Then i ordered some nice looking cable, and i plug it in, and it doesnt work at all, no headphones recognized and no sound coming from them.. So i thought the cable was trash and i bought one from a quite known brand where i live, in a local store here, and again it doesnt get recognized.. But i noticed (Note that all cabled i ordered said, they were compatible with the Mi6) that when i plug the headphones in the plugged in adapter, i get some weird noises, like when you rotate a 3.5mm jack in its port, some weird sounding noises, but thats all noise i get out of it... So is my port broken ? Charging works completely fine.
janosch2001 said:
Hello Mi6 Owners
Im quite happy with my Mi6, but ive noticed something which is very bad.. Since Mi6 doesnt have a headphone jack it ships with an adapter.. Well I've lost that original adapter, and then a few days after i lost it ordered an replacement.. That replacememt worked for a few days, but the cable on that one was pretty flimsy, so it kinda broke amd i returned it.. Then i ordered some nice looking cable, and i plug it in, and it doesnt work at all, no headphones recognized and no sound coming from them.. So i thought the cable was trash and i bought one from a quite known brand where i live, in a local store here, and again it doesnt get recognized.. But i noticed (Note that all cabled i ordered said, they were compatible with the Mi6) that when i plug the headphones in the plugged in adapter, i get some weird noises, like when you rotate a 3.5mm jack in its port, some weird sounding noises, but thats all noise i get out of it... So is my port broken ? Charging works completely fine.
Click to expand...
Click to collapse
That's a weird one.
Hopefully its not broken as it seems to be okay with everything else.
I have no expertise on this but I have two suggestions that won't hurt you.
1.a. If the phone isn't playing music from the speaker then it has detected the headphones. It sounds stupid but on MIUI if you put the phone on silent the volume of music goes to 0.
Double check you have turned the volume up a bit and not on 0.
That's the kind of thing I would make a mistake about....
1. Use something very thin and very gentle (don't scratch anything) to clean out the port. It could be a piece of dust or something.
2. Does the port work for data transfer to a PC? If so then the data pins of the port are working.
3. See if you can borrow someone's adapters. But remember different manufacturers switch around the pins inside the phone and adapter to make only their adapter work on their phones. Its actually really awful they can do this as the whole point of USB C is to standardise everything....
Mine however works with the google pixel adapter so some of them will work
Hello, thanks for your reply
1. Its not getting detected.. So i plug them in, the sound goes through the speaker, as if no heaphones are connected.. The only sound i get from the headphones is when i twist them around in the adapter, a bit, like some weird noises, but definetely not from the music playing (but the adapters ive boight clearly say they are for Mi6)
2. Data Transfer works without problems.. Pc detects it and can copy files in both ways no problem
Those USB-C to 3.5 are a NIGHTMARE, mine was acting like the one you have... if you headset has a detachable 3.5. You can buy a usb-c to 3.5 so you avoid any adapter..... But in the end is cheaper just to get some cheap BT headset. Jbl, Phillips among other sell BT headset for not a lot of money.
Hello, i own a xiaomi mi6, but my model was with main MIC damaged so i have replaced It. Now main MIC works fine and charge working too. The only thing that does not work is the audio output of headphones. Can someone help me please?