Hi.
I've run into a issue with my Galaxy Ace 2. It won't boot, I can't access recovery and I can't charge it.
My phone was working fine last night (12th October). When I woke up my phone was frozen so I took the battery out and tried turning it back on, this is when it only showed the "Samsung Galaxy Ace 2 GT-i8160" screen and it stays on it and it does not go past this screen. I searched up fixes and so on, I used Odin and put the Official i8160 firmware which it went through and passed. But even after that my phone will not turn on and still stays on the same screen.
Even after using Odin to put in the Official Rom, I used Vol Up+Home+Power to try and go into recovery, but after the second time the "Samsung Galaxy Ace 2 GT-i8160" screen comes up it will take me to a grey screen and will not proceed to the recovery menu no matter how long I leave it and how long I hold down the home button.
I can not charge my phone because when I plug it in via USB, it will give me the loading screen that shows before the charging screen shows and it will crash on that loading screen. If I try to use a mains charger, it will automatically turn on the phone giving me the logo screen and will stay on the screen. I have tried all known soft brick fixes but still does not help.
All help will be useful. I need my phone everyday. Thank you.
Download Mode works?
Wysłane z mojego Redmi 3 przy użyciu Tapatalka
pawix9 said:
Download Mode works?
Wysłane z mojego Redmi 3 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yes, the download mode words.
What version of android you flash?
Wysłane z mojego Redmi 3 przy użyciu Tapatalka
pawix9 said:
What version of android you flash?
Wysłane z mojego Redmi 3 przy użyciu Tapatalka
Click to expand...
Click to collapse
I believe it is on Jellybean not sure what version of jellybean as I can not access my phone
Maybe try flash 2.3.6.
Wyklepane na Redmi 3 Pro
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
If it not work, try flash 3 file Rom with pit file.
Wyklepane na Redmi 3 Pro
pawix9 said:
Maybe try flash 2.3.6.
Wyklepane na Redmi 3 Pro
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
If it not work, try flash 3 file Rom with pit file.
Wyklepane na Redmi 3 Pro
Click to expand...
Click to collapse
Any idea where to get the 2.3.6? and I did try a PIT file first time but it didn't allow me to use one
Here is the one: https://samsung-firmware.org/download/Galaxy Ace 2/q471/XME/I8160DXMA1/I8160OLBMA1/
It's for malysia, but not dangerous for Phone.
Wyklepane na Redmi 3 Pro
---------- Post added at 11:45 AM ---------- Previous post was at 11:42 AM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my ace with broken screen, also it work.
Wyklepane na Redmi 3 Pro
Hello, I am a newbie here.I just want to know more about upgrading my samsung galaxy ace 2 gt-i8160. I don't have enough knowledge and courage to update or even optimize my android device.Thanks and more power.
Sent from my A11w using XDA Free mobile app
jfbuendia said:
Hello, I am a newbie here.I just want to know more about upgrading my samsung galaxy ace 2 gt-i8160. I don't have enough knowledge and courage to update or even optimize my android device.Thanks and more power.
Click to expand...
Click to collapse
All knowledge is here in Xda
Just upgrade with odin to official jb 4.1.2 mg2
And flash temp cwm recovery. And flash any custom rom.
I recommend cm11 from Ace2nutzer is Best rom for old Ace 2
I recommend cm11 as well, awesome rom for ace 2.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IN ORDER TO INSTALL THIS ROM YOUR DEVICE MUST HAVE UNLOCKED
FlymeOS Patchrom:https://github.com/FlymeOS
Screenshot:
bugs:
Headphone volume FC 70%+
Inst:
Download the ROM
Copy on your sdcard
Reboot to recovery
Do nandroid backup
Wipe ALL
Flash the ROM zip
Boot
DOWNLOAD
https://mega.co.nz/#F!g9QFmZyD!Bn3yzY6_6BK4T5ZSQmVWlQ
XDAevDB Information
[ROM][LP 5.0.2][UB]FlymeOS_4.5.1.1R C6902/03
ROM OS Version: 5.0.2 Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: UNLOCKED + Recovery
Based On: CM12 Rom
Version Information
Status: Beta
Current Beta Version: 4.5.1.1R
Beta Release Date: 2015-07-27
I'm sorry!
My English is very bad!
If you like this ROM,Please donate, thank you very much!
http://forum.xda-developers.com/donatetome.php?u=6844550
Wow, I have been waiting for this port on Z1. thank you very much. Will try and let you know...!
badboy4a2 said:
Wow, I have been waiting for this port on Z1. thank you very much. Will try and let you know...!
Click to expand...
Click to collapse
I hope you like this ROM
shall i flash cm12 first ? can i flash this over cm12.1 ? thnx
iSpammer said:
shall i flash cm12 first ? can i flash this over cm12.1 ? thnx
Click to expand...
Click to collapse
Wipe ALL
Flash the ROM
I'm trying this out at the moment. Hopefully its to my liking.
UPDATE: I tried it. Everything seemed fine until I plugged in an external speaker and tried to pull up the volume to more than half. It gave me an error.
hakkai999 said:
UPDATE: I tried it. Everything seemed fine until I plugged in an external speaker and tried to pull up the volume to more than half. It gave me an error.
Click to expand...
Click to collapse
Headphone volume 70% FC
Please wait for FlymeOS Patchrom update
hakkai999 said:
UPDATE: I tried it. Everything seemed fine until I plugged in an external speaker and tried to pull up the volume to more than half. It gave me an error.
Click to expand...
Click to collapse
This happened to me but then I rebooted a few times and wiped the dalvik-cache and cache partition and it worked fine
Is there a chance to make this rom for locked bootloader?
Wysłane z mojego C6903 przy użyciu Tapatalka
Everything looks fine except Chinese language in apps...Dialogue boxes..etc...Otherwise Okay..Anyway nice work....
qqrq said:
Is there a chance to make this rom for locked bootloader?
Wysłane z mojego C6903 przy użyciu Tapatalka
Click to expand...
Click to collapse
Nope, it is based on CM12 so bootloader has to be unlocked.
I can flash this on CM12.1 after WIPE DATA/FORMAT SYSTEM? English is in rom? What a bugs?
Thanks @M-Rom. Keep the good work.
so far so good
just go some issue
the nav buttom sometimes lag
and the screen on the first boot freeze but never happend again
lack of gapps was a small issue but flashed gapps cm12.0 for this
camera LAG
lockscreen LAG
the built in call recorder is a killer feature for me e.e
When any new updates? What a bugs in this ROM?
Tapped from Sony Xperia Z1. (CM12.1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
I'm not responsible for bricked devices, baterry explosion, and other things, which may do with your phone.
Installation instruction :
1. Do TA backup *
2. Unlock bootloader *
3. Download rom on your phone
4. reboot into recovery and do a full wipe
5. flash rom
6. flash gapps # (any package for 5.1, I using opengapps.org)
7. Reboot into fastboot and flash twrp to FOTAKernel partition # (from some code reasons kernel contain aosp recovery)
8. Reboot into system
9. Enjoy !
* If you don't done it yet
# optional
Download :
http://d-h.st/users/AndropaX/?fld_id=46873#files
Changelog:
Settings > about phone > changelog
Screenshots :
See screenshots tab
Kernel source :
https://github.com/CyanogenMod/android_kernel_sony_msm8974/tree/cm-12.1
XDA:DevDB Information
[Unofficial][5.1.1]Euphoria OS 1.1 honami, ROM for the Sony Xperia Z1
Contributors
AndropaX
Source Code: https://github.com/euphoria-os-legacy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Stable Version: 1.1
Stable Release Date: 2016-01-31
Created 2015-08-26
Last Updated 2016-01-31
Super. ...
My phone is having random reboots on this ROM.
I haven't any problems.
What kernel settings are you use ?
Cm kernel (which haven't any alternatives) isn't so stable, but i think this is better option than old kitkat or stock with memory leaks.
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
I'm using the one bundled with this ROM. It reboots when calling, and sometimes the calls have no sound. I'm on C6902
I have c6903, build scipt, i don't know why not pack c6x02 script into rom... Try manualy add this from cm 12.1
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
great and smooth rom
but i have a big problem.. i dont know why the pen mode is forcibly on and it wont switch of even with pimp my z1 or pen mod.apk
any manual ways to disable it?!!
On my phone isn't deafault enabled.
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
AndropaX said:
On my phone isn't deafault enabled.
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
Click to expand...
Click to collapse
interesting!!! dont know why but i can use pen to control it... can you please provide a manual way to disable it ? any scripting or something?
i just noticed something... that the pen mode is not on but the screen is somehow over sensitive and reacts to metal things ... any way to overcome this problem or issue? i have it on all cm roms.. i tried lots of them
You removed factory foil with sony logo ?
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
C6902 owners :
Try zip in attachment
AndropaX said:
You removed factory foil with sony logo ?
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
Click to expand...
Click to collapse
no... the asf is still on it... i have this problem on all cm 12+ roms
New build available in download tab.
AndropaX said:
New build available in download tab.
Click to expand...
Click to collapse
great!! thanks for new build
flashed and noticed the themes FC problem?
any suggestions ?
Probably this fix it :
https://github.com/Euphoria-OS/andr...mmit/af266ea0c854c9d9a46209ae2589bab8305d054c
This was released after my build
I clean workspace and release new build later today.
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
AndropaX said:
Probably this fix it :
https://github.com/Euphoria-OS/andr...mmit/af266ea0c854c9d9a46209ae2589bab8305d054c
This was released after my build
I clean workspace and release new build later today.
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
Click to expand...
Click to collapse
just fixed it.. switched to previous build and backed up themes via titanium backup, and flashed the new one and uninstalled the themes and restored the backup.. problem fixed for me
Sorry but how to do step 7?!
Pleasr help
Thank you
Sent from my C6903 using Tapatalk
Visit this threads :
http://forum.xda-developers.com/showthread.php?t=2588979
http://forum.xda-developers.com/xperia-z1/general/recovery-2-8-7-0-z1-honami-t3173411
Wysłane z mojego Xperia Z1 przy użyciu Tapatalka
Great Rom!! but after installing the version 20150903, persist the date of compilation 20150825.
I made a fully Stock & Rooted/Debloated Rom of the Marshmallow update for Reteu Lux (Single sim).
The Stock version is pure stock.
The Debloated version only has the necessary Google Apps & some Moto Apps such as Demo mode and MotoCare deleted. And is also deodexed and zipaligned.
Download:
https://www.androidfilehost.com/?w=files&flid=48921
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
@eskamhl (for providing me the tools I needed)
@xQrzy (for providing me the TWRP backup I forgot to make)
Enjoy!!!
Rooted version is uploading now
Single or dual sim?
Gesendet von meinem ZP999 mit Tapatalk
tasar said:
Single or dual sim?
Gesendet von meinem ZP999 mit Tapatalk
Click to expand...
Click to collapse
Single Sim. Marshmallux is for dual sim
Nice one for doing this, going to give it a flash tonight.
---------- Post added at 10:51 PM ---------- Previous post was at 10:11 PM ----------
Kinda weird, but stuck at Moto logo splash screen for good 20 minutes +, doesn't look like it wants to boot for me
Does it have SMS/charging notification light enabled
Spitfire400 said:
Nice one for doing this, going to give it a flash tonight.
---------- Post added at 10:51 PM ---------- Previous post was at 10:11 PM ----------
Kinda weird, but stuck at Moto logo splash screen for good 20 minutes +, doesn't look like it wants to boot for me
Click to expand...
Click to collapse
Try a factory reset
Spitfire400 said:
Nice one for doing this, going to give it a flash tonight.
---------- Post added at 10:51 PM ---------- Previous post was at 10:11 PM ----------
Kinda weird, but stuck at Moto logo splash screen for good 20 minutes +, doesn't look like it wants to boot for me
Click to expand...
Click to collapse
Full wipe? Data, system, dalvik, cache?
richardrs123 said:
Does it have SMS/charging notification light enabled
Click to expand...
Click to collapse
Nope flash squid kernel
dictionary said:
Full wipe? Data, system, dalvik, cache?
Click to expand...
Click to collapse
Of course
I have also added a Stock+Rooted zip, It's fully stock but with Root and Busybox added
Benjamin_L said:
Try a factory reset
Click to expand...
Click to collapse
I will do. Again lol
Sent from my XT1562 using Tapatalk
GtrCraft said:
Of course
Click to expand...
Click to collapse
? I was asking if he'd done a full wipe, to eliminate that as an issue
Flashed and stuck in the boot screen (WARNING: BOOTLOADER UNLOCKED).... factory reset and still and same
Mr.Hunk said:
Flashed and stuck in the boot screen (WARNING: BOOTLOADER UNLOCKED).... factory reset and still and same
Click to expand...
Click to collapse
Which version? And did you clean flash
GtrCraft said:
Which version? And did you clean flash
Click to expand...
Click to collapse
Same for me using Debloated/Rooted on a clean flash. I'll try Stock+Rooted once I have it downloaded.
fiferboy said:
Same for me using Debloated/Rooted on a clean flash. I'll try Stock+Rooted once I have it downloaded.
Click to expand...
Click to collapse
GtrCraft said:
Which version? And did you clean flash
Click to expand...
Click to collapse
Same here... Clean flash with the debloated/rooted version..... almost 30 mins but no boot..... need to check with something else....
Mr.Hunk said:
Same here... Clean flash with the debloated/rooted version..... almost 30 mins but no boot..... need to check with something else....
Click to expand...
Click to collapse
Second that,does not boot sadly.
Wysłane z mojego XT1562 przy użyciu Tapatalka
It looks like the debloat deleted somethibg important. I will delete it until further notice. Although with that many downloads I am suprised I haven't been told earlier
Sent from my XT1562 using Tapatalk
You can flash the stock+rooted version and delete system apps you don't want.
Sent from my XT1562 using Tapatalk
Hi Guys I'm on MIUi Global 9.0 stable 9.0.2.0 (NCAMIE)and wants to flash developer rom i have a locked bootloader as in current global stable rom I can't bind my mi account. I downloaded developer rom from http://en.miui.com/getrom-326.html?m=yes&mobile=2
But when i flash from system update app it give unable to verify error.
Change the name of the downloaded file to "update.zip" and flash in recovery
Wysłane z mojego MI 6 przy użyciu Tapatalka
In stock recovery i cannot find any option to install zip file..
Zumzum20 said:
In stock recovery i cannot find any option to install zip file..
Click to expand...
Click to collapse
three dots then select the update package and the file with the changed name update.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wysłane z mojego MI 6 przy użyciu Tapatalka
I downloaded 8.1.1 developer rom from miui site, when i use updater app it give me error " its looks like your android version is different from that in recovery package try flashing your device in fastboot mode" ...
I renamed to update.zip but still getting this error..
download this version and do it as before
https://xiaomifirmware.com/download-link/?dlm-dp-dl=7689
Wysłane z mojego MI 6 przy użyciu Tapatalka
You need to use the official Xioami tool "MiFlash" to flash and download the FASTBOOT image not the rom that is in the download section.
@wildger will this tool work for locked bootloader..?
No, for fastboot method you need to unlock the bootloader and then when you flash it will give the option to flash and relock bootloader or just flash.
Why can't you bind your account???
Did you enable Find my device, registered your sim and then tried to bind account??
wildger said:
No, for fastboot method you need to unlock the bootloader and then when you flash it will give the option to flash and relock bootloader or just flash.
Why you can't bind your account???
Did you enable Find my device, registered your sim and then tried to bind account??
Click to expand...
Click to collapse
Read the topic first and what the problem is. there is a bug adding Mi account, that's need a software change.
Wysłane z mojego MI 6 przy użyciu Tapatalka
Ricco88 said:
Read the topic first and what the problem is. there is a bug adding Mi account, that's need a software change.
Wysłane z mojego MI 6 przy użyciu Tapatalka
Click to expand...
Click to collapse
Most of those "bugs" binding the account come from people that didn't enable find my device and/or didn't register their Sim to xiaomi..
If you don't have enable those two things you won't be able to bind.... That's why i'm asking
@wildger
Here you are right, but I decided that he made the necessary steps. only in the way I give will be able to unlock the botloader
Wysłane z mojego MI 6 przy użyciu Tapatalka
wildger said:
Most of those "bugs" binding the account come from people that didn't enable find my device and/or didn't register their Sim to xiaomi..
If you don't have enable those two things you won't be able to bind.... That's why i'm asking
Click to expand...
Click to collapse
No there is a bug with stable ROM that doesn't work in certain conditions.
The only fix is to flash developer ROM on locked BL and then bind account.
Really strange but its true.
I had my account fully registered with Xiaomi but I wasn't able to bind.
Immediately used developer ROM and was able to bind straight away.
Dobsgw said:
No there is a bug with stable ROM that doesn't work in certain conditions.
The only fix is to flash developer ROM on locked BL and then bind account.
Really strange but its true.
I had my account fully registered with Xiaomi but I wasn't able to bind.
Immediately used developer ROM and was able to bind straight away.
Click to expand...
Click to collapse
More reasons to leave behind MIUI.....
I enabled find my device option and my sim is also registered with xiaomi account.
Its been more than 3 months I'm stuck with different errors to bind my account.
Ist i face 86006 error then unable to connect network, now i cannot verify downloaded developer rom from system update app, this is really annoying...
Now I will try xiaomi tool and link shared by Rico88.
Thanks
Give us feedback about xiaomitool. It works for dev rom?
Thanks @Ricco88 i flashed developer rom using link provided by you, and also bind my account.
Thanks..
@domenicocortez you can use Rico link to flash devoper rom it is safe to use...
So, its possible to flash dev rom with xiaomitool on mi6?
XiaomiADB or xiaomitool?
@domenicocortez follow the instructions from post 4 and download the firmware from post 6.
@Zumzum20 I am glad that I could help and most importantly that it works
Hello, got similar errors, recenty i update via OTA MIUI 9.2. On Mi unlock webpage i have permision to unlock bootloader, and my phone status shows error 86006.
If i try to install global developer via fastboot its show error (erase boot error), when i try to install via update its shows error (can't verify update) and if i try update via xiaomitool its show error (Error 1038 - Error 1038 means : you have locked bootloader).
I have enable my device but on the phone there is nowhere to activate sim card. Another strange thing is on my miui account page>settings>personal info its shows: Redmi 5 Plus and i cant change it.
Is the huge amount of bricked devices related to the LCD/TP version? Would be nice to see your answer.
How to find out LCD/TP version:
Dial
*#*#64663#*#*
read out Version info - LCD / TP
With this version Android 10 installed without any problems
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wysłane z mojego Mi A2 Lite przy użyciu Tapatalka
My version just like you, should tray tobupdate to android 10
sulczan said:
With this version Android 10 installed without any problemsView attachment 4967585
Wysłane z mojego Mi A2 Lite przy użyciu Tapatalka
Click to expand...
Click to collapse
Exactly the same for me.
Biel / EPPG updated smoothly
Lcd tp on me is ofilm csot i won't update until the fix.
not working: LCD oncell, vendor csot; TP Ofilm
Im waiting for a fix and i think that was my first and last xiaomi fone!
Updated successfully
Success (whew, now I can breath easier) - just finished updating/upgraded to Android 10 stock. 3GB/32GB global model - bootloader unlocked but everything else stock. OTA file sized at 1089 MB, process took about 10 minutes, start to finish. Looks fine for the time being, rebooted after a few minutes again, for good measures & made sure usb-debug remained enabled.
Hardware info - PCBA_V2_GLOBAL
(will upload screenshot later, if that'll help others to decide to or not to.)
Cellular network on T-Mobile & Google Fi, here in USA.
Voted working.
LCD: Oncell/Bird
TP: Biel/EBBG
Also of note, I unlocked the bootloader via "Developer options" > "OEM Unlocking" as suggested by others before applying the update/upgrade.
Not working on mine had to rollback
For me the update bricked the phone but managed to go back to the January firmware.
Wonder how are we gonna know that they fixed the update...?
andraslate said:
For me the update bricked the phone but managed to go back to the January firmware.
Wonder how are we gonna know that they fixed the update...?
Click to expand...
Click to collapse
what happend if i star the download?
what can i do now?
Haven't tried mine too scared it'll brick.
LCD: oncell csot
Tp: onfilm+csot
yes working: LCD oncell, vendor bird; TP biel
So far, just had to forget and re-enter wi-fi
OTA working, bird & biel, DT2W used to work to.
There are some backlight issues at the bottom of the screen that's all.
I guess the issue with the update is really the screen.
LCD/ TP for me are oncell / Ofilm and I could not update at all. Had to roll back!
Also sorry but voted in the 4th category by mistake, should have voted in the second on the "rd
Hey!
OTA update worked fine for me -> data is below. (Hungary, Telenor for carrier if it matters anything, A2 Lite 4/64 version)
Same here: with LCD oncell, vendor bird; TP biel (cant post shot now)
Exact data: PCBA_V2_GLOBAL
LCD:
oncell,vendor:bird,IC:lol898
TP: Biel(TP)+EBBG(LCD),[TP-IC]GT917D,
[FW[Ver501c,[CFG]Ver0x55
TP surface Color:
0x32 Black
ps.: just forget to mention that before update i just turned on OEM Unlock features at developer mode (don't know if it is matters at this OTA update or not)
Took ~7-8 mins for update.
Mine updated perfectly but is showing some black spots on the bottom, they appear 2 seconds after the Android one logo when booting and never go away.
Working on my 4/64 version with LCD oncell, vendor bird and TP biel