so I have the galaxy i747 on att unlocked.
a few weeks ago it bricked itself trying to over the air update. I couldn't fix it so I had it jtagged and it came back. I also paid for an imei repair.
everything was fine, I could make calls and stuff but eventually lost signal.
I sent it back as I ended up bricking it trying to restore to stock rom (it was on philz touchwiz)
he fixed it, said the network problem was due to my simtray.
I replaced the simtray today, I had full signal but when I tried to make calls there was no dial tone and ive lost signal again, this time its running a hyperdrive rom. my simcard is TESCO which shares a network with O2.
it picks up the simcard and stuff im just not getting any signal, when I try to register on the network it says unable to connect.
if anyone could please help me with this I would really appreciate it! alex
cookiealexd123 said:
so I have the galaxy i747 on att unlocked.
a few weeks ago it bricked itself trying to over the air update. I couldn't fix it so I had it jtagged and it came back. I also paid for an imei repair.
everything was fine, I could make calls and stuff but eventually lost signal.
I sent it back as I ended up bricking it trying to restore to stock rom (it was on philz touchwiz)
he fixed it, said the network problem was due to my simtray.
I replaced the simtray today, I had full signal but when I tried to make calls there was no dial tone and ive lost signal again, this time its running a hyperdrive rom. my simcard is TESCO which shares a network with O2.
it picks up the simcard and stuff im just not getting any signal, when I try to register on the network it says unable to connect.
if anyone could please help me with this I would really appreciate it! alex
Click to expand...
Click to collapse
I would check your IMEI/baseband. Make sure they're correct.
Also, could check your APNs.
BWolf56 said:
I would check your IMEI/baseband. Make sure they're correct.
Also, could check your APNs.
Click to expand...
Click to collapse
ive tried both those, the weird thing is I get signal and can make a call and receive texts when doing a gps check. something is blocking it but im unsure what.
I flashed the U1 firmware with no carrier bloat, and I noticed that it loses service every now and then and I have to reboot to get it working again. How do I fix this? It's not my SIM card, because it works fine in my other phone.
The weird thing is, I'll still have data access, I just can't make/receive calls. Don't know if it affects SMS/MMS, though.
Now it's saying "emergency calls only" and "no network connection."
I think I fixed it. I flashed back to stock, currently going through setup but my network is connected with 3 bars and a 4G LTE symbol.
Nice to know people will help out here in this subforum....
Hello everyone,
I'm having a bizarre problem that no one can seem to fix. I have an unlocked AT&T branded Note 10+. I used it on my preferred service, MetroPCS.
A couple of weeks ago it stopped receiving or allowing me to make calls. The signal showed full bars and everything else worked fine. After attempting to fix it and failing I switched providers and went to Verizon.
Bizarrely, my phone will not work on prepaid vzw but did work on a post paid so I signed up. Everything phone related worked. It was however very expensive.
Seeing my phone work on a network made me think my phone wasn't the issue so I went back to my preferred network.
Now the situation is this: With a metro sim inserted I show 4G LTE icon but no bars, instead it's just a circle with a line thru it. In this state I have full data but now calls and texts don't work. When I try to make a call the 4G icon disappears and full signal bars replace the circle with the line.
I tried metro tech support, they are no help at all. So I called Samsung. They informed me that my device is still locked. That can't be true as I've used it on two networks that weren't AT&T. However, rather than writing them off I went back to VZW and had a worker insert his sim into my phone and it worked flawlessly, just reassuring me that my device is unlocked.
This device, other than being unlocked is unmodified and had been used in a 100% stock state. Is there anyone here who can please direct me to a solution for this issue?
Edit: I have tried switching to new metro sim cards. Reset my apns and network settings. I even tried a full factory reset.
kingnarkissos said:
Hello everyone,
I'm having a bizarre problem that no one can seem to fix. I have an unlocked AT&T branded Note 10+. I used it on my preferred service, MetroPCS.
A couple of weeks ago it stopped receiving or allowing me to make calls. The signal showed full bars and everything else worked fine. After attempting to fix it and failing I switched providers and went to Verizon.
Bizarrely, my phone will not work on prepaid vzw but did work on a post paid so I signed up. Everything phone related worked. It was however very expensive.
Seeing my phone work on a network made me think my phone wasn't the issue so I went back to my preferred network.
Now the situation is this: With a metro sim inserted I show 4G LTE icon but no bars, instead it's just a circle with a line thru it. In this state I have full data but now calls and texts don't work. When I try to make a call the 4G icon disappears and full signal bars replace the circle with the line.
I tried metro tech support, they are no help at all. So I called Samsung. They informed me that my device is still locked. That can't be true as I've used it on two networks that weren't AT&T. However, rather than writing them off I went back to VZW and had a worker insert his sim into my phone and it worked flawlessly, just reassuring me that my device is unlocked.
This device, other than being unlocked is unmodified and had been used in a 100% stock state. Is there anyone here who can please direct me to a solution for this issue?
Click to expand...
Click to collapse
You just proved either the SIM or the account is the issue.
Sent from my SM-N976V using Tapatalk
I would agree. I should've included that I have tried 3 new metro sim cards, with the same result.
However, please tell me more about how this could be an account issue? Because that could lead me down a path to a resolution. Thank you
I've tried everything, so hopefully someone can shine some light into this issue.
I bought a new (unused but from a 3rd party) Samsung Galaxy A50 (A505U) Verizon branded and unlocked. Got a sim card from Visible and went to get it connected. Nothing. WiFi works, everything works, but no cell service.
Here's what I've done (some multiple times)
- reset everything to include network settings, hard reset, etc
- removing the sim, resetting, putting the sim back in. I always get a notification saying the sim card is removed and it goes away when I put the sim back in, so it is recognizing a sim card is in there
- switched sims with another Visible phone/sim and nothing. Both sims worked on other phone but neither worked on this phone
- tried getting into the hidden menus but none of them worked
- talked to Visible tech support which upgraded the issue to the highest level and concluded it's the phone
- Visible believes it's the APN settings but I cannot edit current APNs nor add new ones (grayed out)
- manually add networks, I can see Visible, TMobile, ATT, and some weird numbers, but when I try to connect to Visible it says cannot register on the network, other networks say the sim is not setup for them
- sometimes I get the icon that shows all bars but they're grayed out, sometimes it shows 3-4 bars lit up, sometimes even shows a 4G icon, but mostly the grayed out bars
- sent the phone to Samsung, they tested it and found no faults, guess the hardware is good, ruled that out.
- got into dev options but I'm aware the OEM unlock is not on option on the A505U, not sure if I can change anything else.
I'm out of options. Any other ideas? I think if I can either get into the hidden menus I'll be able to diagnose it better, or if I can somehow change the APN settings I'll be able to set it up. Visible tech support thinks it's the APN, which makes sense to me, but I can't change them.
Any help is greatly appreciated.
I was able to get into the CSC change function, there's not many there, but would changing the CSC help? If so, which should I go to?
I've had a similar issue. Was working fine until the Android 10 update arrived. Since then, it won't work with my total wireless sim card. Tried 3 different sim cards on it, but nothing. Can't add it do anything with the APN, and getting into the phone info hidden menu doesn't help any. I suspect it's a bug in the new firmware or something like that. Works fine with a Verizon SIM though.
Update: Verizon SIM no longer connects to phone. Still works with LTE data. It seems that the CDMA radio quit working with the update to Android 10. Must have been collecting to the Verizon network with VoLTE until it updated the provisioning or something.
So, I finally figured out a workaround for mine that was able to get both data and voice networks to connect while using total wireless, which is an MVNO on the Verizon network. I pretty much narrowed it down to being an issue with the modem not working with CDMA. What I did was download the last Android 9 firmware and flashed just the modem (file starts with CP_) using Odin. After that, I rebooted it and voila! It connected.
Just thought i would give my experience as i just delt with this. i got my 10 update this morning nd let it update and apon a reboot i lost all mobile connection, a signal bar would show for a few seconds looking like it was trying to lock in a signal and it would go back to the ⌀ symbol. i tried flashing the android 9 modem from 2 different updates and neither fixed it. i just decided to order a new phone as i feel its time anyways. my next attempt will be to flash android 9 back using odin then just throw this phone up on craigslist
edit: odin successfully flashed back to android 9 and signal now works again. so if anyone has this issue you can try the method above of just flashing the modem and if that doesnt work you can go back to 9 and restore functionality of verizon mvno's
darkmage1991 said:
Just thought i would give my experience as i just delt with this. i got my 10 update this morning nd let it update and apon a reboot i lost all mobile connection, a signal bar would show for a few seconds looking like it was trying to lock in a signal and it would go back to the ⌀ symbol.
Click to expand...
Click to collapse
Out of curiosity, which carrier are you using?
TJay99 said:
Out of curiosity, which carrier are you using?
Click to expand...
Click to collapse
Visible
samsung a50 not connecting to VZW towers (red pocket)
My phone is doing the exact same thing and while I can appreciate how you resolved the issue it doesn't make much sense to me.
I use Red Pocket for my network. (Which uses Verizon towers - I use the CDMA Sim)
Before this major update to 10 my phone worked flawlessly. Now it won't connect to the network much like you guys have stated in this thread. Mine will connect intermittently for like 3 or 4 min tops and then get kicked off the tower and will actually not show any bars (Circle with a line through it) to show no service for about 10 or so minutes then restart the whole process.
I also have a work phone (2nd phone) that is directly tied to the verizon towers on the verizon network. If I take the sim out of that phone and put it in my samsung a50 the samsung a50 is happy and can make phone calls, send texts, and stays on the vzw towers with no disconnects.
If I take my red pocket sim card and place it in my work phone that phone also works just fine - send messages, make phone calls, and stays on the vzw towers with no disconnects. (work phone = iphoneXR - it's free, sue me)
Even though reverting the modem obviously fixes your issue I do not think that is the actual problem. It also doesn't seem that a third party carrier is being randomly booted off the towers, it seems to be a glitch with third party carriers using third party sims utilizing this new android 10 software that VZW towers do not like.
Which obviously points to an issue with Samsung's latest software not being compatible with third party carriers.
I can't seem to contact Samsung in a direct manner to resolve this issue as they want me to take it to a third party store to have it looked at. I spent 2 and half hours with tech support from red pocket and they came to the conclusion that VZW was doing "upgrades/maintenance" to their towers in my area. (whatever that means.
Any ideas on how I can contact Samsung directly to detail this issue to them? I really do not want to have to root my phone in order to use odin to set my modem back to version 9 as I'm hearing that doing so voids all kinds of implied warranties with the phone and it's only 6 months old.
Appreciate any help that you guys might be able to steer me towards.
Thanks.
Before this major update to 10 my phone worked flawlessly- They Told you the answer, Odin # 9 or if its under warranty take it back Good luck.
My phone (SM-A505U) wasn't even working on visible before android 10.
See my post at the end of this thread: https://forum.xda-developers.com/ga...official-firmware-t3955727/page2#post83845605
I have that problem too. Where I can download v9. I got the Odin.
Hello All,
Tried looking for a similar situation as mine on here.. but couldn't find it.
I flashed my G710PM to G710VM to use on Reach Mobile (a Verizon MVMO).
Their website said that phone was incompatible with their service, when I put the simcard in there, the phone received a signal and data worked. 1 hour later it stopped working.
Anyone know why this happened? And is it possible to get it to work on Verizon MVMO?
Can you still make phone calls/do you still have signal? If so try messing around with the apn settings if you haven't' already