Hello,
my FE375CG is bricked: when I turned it on, it's stuck on INTEL logo.
I tried this method:
http://forum.xda-developers.com/fon...w-to-unbrick-soft-brick-t3381263#post67938512
but, after third passage, I can't turned it off, it remains stuck on Intel Screen.
So I waited battery discharge, but when I plug to recharge, the tablet turned on and stuck on INTEL screen, I' can't proceed to the fourth step: I can't maintain + and - and power on my device for 4 seconds because it turns itself on, remains on INTEL bootscreen and I can't do anything)
Have you some suggestions? Should I throw it in the trash or there are chances of recovery ?
(sorry for my poor English)
EDIT: I think I've choose the wrong section of the forum... sorry!
1 - Go To Fastboot Mode
Turn off Your Tablet
Press ( Power + Volume up )
When Tablet Vibrate leave power button , keep pressing volume up
When asus logo appears leave all buttons
install Android Official Rom
Download The rom you want to install from asus Site
copy it to SD Card
Rename it to ( mofd_sdupdate )
Enter Fastboot Mode ( You will see it's changed )
choose recovery
Now You will see android installing updates
---------- Post added at 12:31 AM ---------- Previous post was at 12:29 AM ----------
Don't download latest firmware bcz it's lag download the previous version
Hello everyone! So... I rooted my ZE551ML when I got it about a month ago and today an update pop-up from Asus shows up. So I said "what could go wrong?" .... How about everything?? Basically, I tried a bunch of different things because I could access via ADB, so I tried to unroot it with a bat file I found with a guide for that, but nothing. Now, I passed from black boot screen with white logo to white boot screen with black logo and I can't connect it with adb nor recovery mode. Is there something I can do to enter recovery? With the normal "volumeUP+power" I get nowhere. Can anybody help?
mikla90 said:
Hello everyone! So... I rooted my ZE551ML when I got it about a month ago and today an update pop-up from Asus shows up. So I said "what could go wrong?" .... How about everything?? Basically, I tried a bunch of different things because I could access via ADB, so I tried to unroot it with a bat file I found with a guide for that, but nothing. Now, I passed from black boot screen with white logo to white boot screen with black logo and I can't connect it with adb nor recovery mode. Is there something I can do to enter recovery? With the normal "volumeUP+power" I get nowhere. Can anybody help?
Click to expand...
Click to collapse
hope you can access fastboot. if yes you can install recovery and ifwi files from fastboot
How do I start fastboot mode? I let it charge all night and my pc does the "device connected/disconnected" sound all of the time, but adb says no device (the drivers are ok, I tried before). I have to say that I tried to flash boot.img, droidboot.img, recovery.img and system.img. Problem is, while I was downloading those files I found 2 other methods for recover it, one was to unroot it and the other to unlock the bootloader.... And I tried. Now, I'm unable to enter recovery.
Edit: I tried this guide http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 and for a short period of time (about a second or 2) I can see another device under the "Intel SOC" in device manager, but xFTSK cannot see the phone, even when it shows up for just a second on device manager.
Edit2: holding power down and plugging in the usb cable allows xFSTK to see my device, I put in the files and begin downloading, everything is going good but then it says
07:24:01 - XFSTK-LOG--Windriver Error: 0xC0000011, HC status: The host controller has set the Transaction Error (XactErr) bit in the transfer descriptor's status field
And from there it just starts all over again until it fails definetly.
Edit3: I'm trying the hell out of this software. I attach 2 logs to this post with relatives configurations. Still waiting for help.
Using xfstk tool
mikla90 said:
How do I start fastboot mode? I let it charge all night and my pc does the "device connected/disconnected" sound all of the time, but adb says no device (the drivers are ok, I tried before). I have to say that I tried to flash boot.img, droidboot.img, recovery.img and system.img. Problem is, while I was downloading those files I found 2 other methods for recover it, one was to unroot it and the other to unlock the bootloader.... And I tried. Now, I'm unable to enter recovery.
Edit: I tried this guide http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 and for a short period of time (about a second or 2) I can see another device under the "Intel SOC" in device manager, but xFTSK cannot see the phone, even when it shows up for just a second on device manager.
Edit2: holding power down and plugging in the usb cable allows xFSTK to see my device, I put in the files and begin downloading, everything is going good but then it says
07:24:01 - XFSTK-LOG--Windriver Error: 0xC0000011, HC status: The host controller has set the Transaction Error (XactErr) bit in the transfer descriptor's status field
And from there it just starts all over again until it fails definetly.
Edit3: I'm trying the hell out of this software. I attach 2 logs to this post with relatives configurations. Still waiting for help.
Click to expand...
Click to collapse
open Xfstk Tool and click Tab -MRD/AO/BO +MOOR Ao+CRC then go to settings under option menu - enable GP Flag Override Option and Enter value - 0x80000807 and save (OK), then choose files -
FW Dnx - dnx_fwr.bin
IFWI - ifwi.bin
OS IMAGE - droidboot_dnx.img.POS_sign.bin
AND connect phone, press begin and Xfstk tool detect the phone and install the required files and you will able to get Normal Fastboot mode and install the firmware by fastboot / Asus Flash tool / or -SDUPDATE Zip file.
-------------------
Press Thanks Button, If i am helped you
-------------------
In the end, after about 20 times, XFSTK did flash what should have. Now, I'm back in business. I changed nothing, just kept trying.
Please help me guys... i am trying my zenfone ze550ml alive again...
So i have messed up things and firstly lost my rom, then covery, then bootloader...
the device isnt power on, no vibration, no led, sometimes it is detected in xFSTK...
Tried download all the three files wiz dnx_fwr, ifwi, droidboot_dnx.img.POS_sign
so its all ok until firmware download it says succeed but something goes wrong then in continuing to os, phone tries to connect 20 times and failure comes...
Please help me guys you guys are the last options after researching lots of threads, videos
Press power and vol- press download in xFSTK - then ;
Try hitting download again in xFSTK at the same time just as you feel two buzzes release power too !
Remember that above and check my video in my signature below re settings needing to be changed in Xfstk too !
Phone is not vibrating... & yeah i followed your tutorial video but i am stuck at contuning to os
Thanks in advance...I flashed mm rom but in settings it showed 5.0... so my droidboot_dnx.img.POS_sign, dnx_fwr, ifwi files are correct as described in this guide? anyone have 6.0 droidboot_dnx.img.POS_sign, dnx_fwr, ifwi files?
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
press vol + and power until it vibrates release .
If phone is not vibrating you may need to recharge a while .
Those files will unbrick 5 or 6
you may need to detach battery for a second too !
you are close , also a good tip -- after a charge up -- attempt again , if fail - leave attached to pc and xFSTK open -- try again after approx 20 mins-- you have changed settings in box ending in [Bla bal +CRC] in xFSTK too
lets hope for the good... thanks for help:good:
Now i am facing annoying windriver error in xFSTK... my device isnt vibrate so the isoc drivers are installed correctly? because it says the device must be power cycled, power off, blah blah blah, during installation? When i click on finish it detects as a a moorefield device (ze550ml)? so whats wrong @timbernot
Now , you might need a new motherboard
send it to ASUS , when you get it back.
Leave it alone
---------- Post added at 10:00 AM ---------- Previous post was at 09:33 AM ----------
But you could try what's already been mentioned
Re detaching power cable on motherboard but am unsure of your abilities
due to what you have already done
Hello all,
I'm stuck in different guides on what to do next.
Problem: Zenfone2 doesn't boot most of the times (either looping after the white ASUS screen) or rebooting during loading of CM13.
Also had charging problem, so I unplugged the battery from the back and put it back. This seemed to solve the charging problem. But problems above still persist. Thinking it may have corrupted some memory.
Tried:
- Factory reset in TWRP -> didn't work (the occasion I did get into CM13 it showed the setup again, so the reset actually went through, but loops still exist).
- When in CM13, after letting the phone sleep for a bit (2 mins roughly) - it doesn't wake up from power button. Have to press long and boot again.
- When in TWRP, after pressing randomly some buttons and go back to mainscreen, the touchscreen stops responding too and reboots
- Since TWRP seems so unstable, I wanted to reflash everything using the Unbrick guide via PC.
-> Problem: Cannot get XFSTK to detect the device (Windows says: USB device not recognized or something like that).
- Another problem: When the USB cable is inserted into the device, it sometimes looks like the power+vol up combination doesn't do anything when booting (either the screen stays black or it tries to boot into CM13 and fail.
So now im a bit stuck on what to try next to solve everything and get myself back into CM13. CM13 has ran since Feb '16 and have been a happy user since then until now.
Thanks for reading!
The simplest solution may be to flash back to stock and start over. If the phone doesn't behave properly on a stock ROM, there could be a hardware problem.
Hi there , in TWRP select reboot then power off .
Enter bootloader via buttons after 10 seconds being off !
Enter bootloader - power and vol + , when in bootloader if on LP -- flash raw with AFT (asus flash tool )
If any probs with above , you might have to fastboot flash stock recovery and boot to recovery if/and a , try raw if on LP with AFT or b, sideload stock firmware you flashed stock recovery for.
audit13 said:
The simplest solution may be to flash back to stock and start over. If the phone doesn't behave properly on a stock ROM, there could be a hardware problem.
Click to expand...
Click to collapse
timbernot said:
Hi there , in TWRP select reboot then power off .
Enter bootloader via buttons after 10 seconds being off !
Enter bootloader - power and vol + , when in bootloader if on LP -- flash raw with AFT (asus flash tool )
If any probs with above , you might have to fastboot flash stock recovery and boot to recovery if/and a , try raw if on LP with AFT or b, sideload stock firmware you flashed stock recovery for.
Click to expand...
Click to collapse
Thank you for your answers! Last hours been trying to flash the stock ROM back. However, when getting into bootloader, adb devices and fastboot devices don't show the device. Or it even freezes and gets into reboot loops again. So this is why I'm stuck, nothing seems to be working from all the guides and things I'm reading.
So precisely:
- Power off bootlooping device by holding power button
- Power on by holding PWR + VOL UP
- When vibrating: release PWR keep holding VOL UP
- Now i'm in bootloader?
- Connect USB cable to computer
- type adb devices, shows nothing.
So what can I try to make connection?
- Now i'm in bootloader?
- Connect USB cable to computer
- type adb devices, shows nothing.
@j4y_ha .................in bootloader
Type >
................................................. fastboot devices
What ifwi version number in bootloader ?
timbernot said:
- Now i'm in bootloader?
- Connect USB cable to computer
- type adb devices, shows nothing.
@j4y_ha .................in bootloader
Type >
................................................. fastboot devices
What ifwi version number in bootloader ?
Click to expand...
Click to collapse
The bootloader in shows the following:
IFWI version: 0094.0173
SERIAL_NUMBER = F8AZFG0152** (couldn't read the last 2 digits as the device rebooted again). Also sometimes the SN shows 012345689ABCDEF.
I've much trouble keeping the device in bootloader. Last tryings it keeps shutting down after couple of seconds in the menu.
EDIT:
So far the device seems to stay in bootloader mode now. I can cycle through the options normal boot, recovery etc. Below the screen it shows Continue the fastboot process in blue text. I've inserted the USB cable but have been unable to get "fastboot devices" to show any device. ASUS Flashtool also doesn't do anything.
I'm going to try to find a micro SD adapter so I can try flashing stock rom in TWRP from the phone itself (would that be something that could work or is this phone fubar?)
@j4y_ha
Do not attempt to flash stock rom in TWRP ! You will brick !
Flash a custom rom in TWRP only- not one with a mm bl version
You have LP
PLEASE
Follow my first reply to you
timbernot said:
@j4y_ha
Do not attempt to flash stock rom in TWRP ! You will brick !
Flash a custom rom in TWRP only- not one with a mm bl version
You have LP
PLEASE
Follow my first reply to you
Click to expand...
Click to collapse
Thank you for your support! Will try again.
I have MM not LP.
I don't understand your reply correctly I think so here is what I think you say?:
I should obtain LP rom for ZE551ML
Next, enter bootloader via buttons PWR & VOL UP after 10 seconds being off !
When in the bootloader, - power and vol + (short press or long?) , when in bootloader ->
I connect USB to computer, flash the file using AFT if I make connection. -- flash raw (raw = LP ROM from ASUS) with AFT (asus flash tool )
Thanks again for your help
j4y_ha said:
Thank you for your support! Will try again.
I have MM not LP.
Thanks again for your help
Click to expand...
Click to collapse
IFWI version: 0094.0173 is LP, NOT M
follow my first reply:good:
---------- Post added at 06:39 PM ---------- Previous post was at 06:37 PM ----------
No1
Hi there , in TWRP select reboot then power off .
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
no2
Enter bootloader via buttons after 10 seconds being off !
no3
When in bootloader you are on LP -- flash raw with AFT (asus flash tool )
@timbernot I'm unable to make connection. Fastboot also most of the times freezes and goes to black screen. What could I possibly try now?
Sorry I thought CM13 was MM but then I'm on LP still haha :good:
j4y_ha said:
@timbernot I'm unable to make connection. Fastboot also most of the times freezes and goes to black screen. What could I possibly try now?
Sorry I thought CM13 was MM but then I'm on LP still haha :good:
Click to expand...
Click to collapse
I'm taking wild guess here that you got wrong TWRP recovery installed somehow or something from M causing all these problems , when you get into bootloader again..Scroll to and select reboot bootloader and fastboot flash stock recovery for LP version you was on .
Then , I guess your problems will be over , where you will be able to flash raw in bootloader or in stock recovery , adb side load the firmware
Thanks for your quick anwer. Will try to get through it haha :good:
DUDEE
that's not a problem.. THAT's like 20 different problems... I bricked the living crap out of my zen the day I bought it (because me = smartypants did not know that the MM boot unlocker is nonexistent so I just tried to root and update from my head using older techniques) and... the XTS tool thingy fixed it..
Don't get me wrong, i want to help but this is the problem that I feel little frustrated with..
Zenfone2 doesn't boot most of the times (either looping after the white ASUS screen) or rebooting during loading of CM13. ## (but it boots sometimes and goes into TWRP, so you have an easy fix to just revert to stock lollipop... why haven't you done that? You sound like you know what most of this stuff does...
Charging problem, so I unplugged the battery from the back and put it back. This seemed to solve the charging problem. But problems above still persist. Thinking it may have corrupted some memory.
## how do you connect this battery issue to your occasional bootloop? Check hardware or firmware and definitely use different threads.. there's no way these are all part of the "same problem"...
When in TWRP, after pressing randomly some buttons and go back to mainscreen, the touchscreen stops responding too and reboots
## Same answer as above - this is unrelated to #2 and unrelated to #1 - is your TWRP the correct one? I mean... did you just maybe flash TWRP version 4000 Modified Alpha for Google Glass??? LOL
When in CM13, after letting the phone sleep for a bit (2 mins roughly) - it doesn't wake up from power button. Have to press long and boot again.
## Is D2W there? "DoubleTap2Wake" ? Are you sure you have a good touch? (this maybe 20% sounds related to your TWRP touch going crazy..)
Cannot get XFSTK to detect the device (Windows says: USB device not recognized or something like that).
## There's this awesome invention called DRIVERS... and we're lucky in this case (cuz I bricked an hour after I bought it) because Intel PC + Intel Phone = Yay... There is even.... a very specific "INTEL ASUS WINDOWS DRIVER" file... from the INTEL AND ASUS WEBSITE... or maybe your USB CABLE is f**? My point is... another unrelated issue where it sounds like you've not even tried it properly before complaining.. I like helping people. I don't like when people refuse to try or they skip the actual study-notes to do it... I used the EXACT same guide to unbrick and it worked in 2 mins... I'm on a 2007 Laptop which overheats if I use 4 tabs... how am I able to follow the exact same guide on a brand new "FULLY BRICKED" phone... it literally would vibrate after trying power button for 5 mins and be stuck in a "blank black screen" for hours and hours... No twrp no nothing.. and I did it - why didn't you? Same guide man...
When the USB cable is inserted into the device, it sometimes looks like the power+vol up combination doesn't do anything when booting (either the screen stays black or it tries to boot into CM13 and fail.)
## Try again. Sometimes people accidentally hit power to early.. or whatever.. It's not a MK2 Fatality.. don't force yourself to get it exact.. Let the menu pop up... just wait a second and scroll up/down just to see if that works... then scroll to Boot-Recov and gently hit power+vUp.. should be fine.. otherwise just .. literally try 10 times.. it WILL work.
Since TWRP seems so unstable, I wanted to reflash everything using the Unbrick guide via PC
## Nope.. TWRP is like Bret Hart. It isn't unstable. Not for LP not MM not for N. Not for Stock Not for CM Not for AOSP. You *wanted* to do what you should have done right at the beginning but you didn't get that done properly (see below)
Essentially you have 8 different unrelated issues (and the biggest one is not reading guides, not trying hard enough and just thinking that people like me sit around and get paid for this)... and want ans in one place w/o just doing the simple thing of going back to everything stock...?? *it's just annoying cuz people who want to help will feel like.... others don't even try simply because we exist and have desire to help...* - I am not trying to offend you but I hope you get my pov.
Do This EXACTLY
#Buy a cable. Borrow a cable. Whatever you do be 1000000% sure the USB Cable is fine
#Install Intel Asus Android drivers from official EXE (google it... don't add new post for that link)
AND THEN
Follow the same Unbrick guide word for word *but* just pay close attention to these:-
IntelSeC Driver + device detected even if OFF (start>devman>showall>intelsec
In the official unbrick utility make sure you're on the second tab at the bottom
In settings check that your device flag is 0x08..... whatever instead of the default 0x000
Back in the *second tab at the bottom* (i don't remember exact name but it's in the guide) -- put the right files (mentioned in guide) in the right boxes.. (mentioned in guide) and remember you ONLY need the DVFWthingy... + TOKENthingy + IFWthingy
Plug the Zen in... hear the "da-dumm" sound... keep looking at the Unbrick tool.. and the moment you see Device Detected = 1 you hit install/start...
AFTER that is fully done *(and if you fail don't post just repeat from scratch)... I don't personally recommend Asus Flash tool it was acting dodgy for me but instead grab the RAW Stock... Rename it to zip.. open it and grab the img files and fastboot flash the fastboot droidboot.img + splashscreen splash.img + boot boot.img + recovery recovery.img
If you've followed all that from the guide and double checked what I've put up there.. you should be fine if you just fastboot reboot bootloader... and go into stock recovery... install zip/update and put your stock OS in there..
Done.
Just please take my advice and don't skim through guides, don't think you don't need to read something, don't click stuff without double checking every line from guide, print it out on PAPER if you need to.... but please don't post like this... and don't use different guides or you will be stuck (as your heading stated..)
Forget everything you knew. Close all other tabs and use this guide thoroughly for Reference:-
https://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840
j4y_ha said:
Hello all,
I'm stuck in different guides on what to do next.
Problem: Zenfone2 doesn't boot most of the times (either looping after the white ASUS screen) or rebooting during loading of CM13.
Also had charging problem, so I unplugged the battery from the back and put it back. This seemed to solve the charging problem. But problems above still persist. Thinking it may have corrupted some memory.
Tried:
- Factory reset in TWRP -> didn't work (the occasion I did get into CM13 it showed the setup again, so the reset actually went through, but loops still exist).
- When in CM13, after letting the phone sleep for a bit (2 mins roughly) - it doesn't wake up from power button. Have to press long and boot again.
- When in TWRP, after pressing randomly some buttons and go back to mainscreen, the touchscreen stops responding too and reboots
- Since TWRP seems so unstable, I wanted to reflash everything using the Unbrick guide via PC.
-> Problem: Cannot get XFSTK to detect the device (Windows says: USB device not recognized or something like that).
- Another problem: When the USB cable is inserted into the device, it sometimes looks like the power+vol up combination doesn't do anything when booting (either the screen stays black or it tries to boot into CM13 and fail.
So now im a bit stuck on what to try next to solve everything and get myself back into CM13. CM13 has ran since Feb '16 and have been a happy user since then until now.
Thanks for reading!
Click to expand...
Click to collapse
Wow @ryankabir
one step at a time hey
xFSTK is used to bring temp bootloader to hard bricked devices .
He has stock LP bootloader and all avenues to repair should be explored first
If anyone needs to unbrick , there is a thread in my signature below ,shows how to go from complete brick , to restoring serial number and into system within 15mins
Thank you for your thourough answer Ryankabir! Much appreciated. My answers are below. I will try your suggestions soon.
ryankabir said:
DUDEE
that's not a problem.. THAT's like 20 different problems... I bricked the living crap out of my zen the day I bought it (because me = smartypants did not know that the MM boot unlocker is nonexistent so I just tried to root and update from my head using older techniques) and... the XTS tool thingy fixed it..
Don't get me wrong, i want to help but this is the problem that I feel little frustrated with..
Zenfone2 doesn't boot most of the times (either looping after the white ASUS screen) or rebooting during loading of CM13. ## (but it boots sometimes and goes into TWRP, so you have an easy fix to just revert to stock lollipop... why haven't you done that? You sound like you know what most of this stuff does...
Click to expand...
Click to collapse
Yes I do know what I can do with it, but it just so complicating as there are different factors like the loops, not being able to get connections with USB. I mean, it is not totally bricked since sometimes I can get into TWRP or bootloader.
ryankabir said:
Charging problem, so I unplugged the battery from the back and put it back. This seemed to solve the charging problem. But problems above still persist. Thinking it may have corrupted some memory.
## how do you connect this battery issue to your occasional bootloop? Check hardware or firmware and definitely use different threads.. there's no way these are all part of the "same problem"...
Click to expand...
Click to collapse
Well, since the phone worked fine before the battery issue, there is some sort of link between the issues I would think. Maybe I've broken some hardware during the battery removal or did the booting into charging mode and on/off continously corrupt some memory leaving me with weird crashes & loops.
ryankabir said:
When in TWRP, after pressing randomly some buttons and go back to mainscreen, the touchscreen stops responding too and reboots
## Same answer as above - this is unrelated to #2 and unrelated to #1 - is your TWRP the correct one? I mean... did you just maybe flash TWRP version 4000 Modified Alpha for Google Glass??? LOL
Click to expand...
Click to collapse
Although I'm not sure if I have the correct TWRP, it did flash CM13 correctly back in FEB 2016 and haven't found a need to update it ever since as it worked fine during the occasional update...
ryankabir said:
When in CM13, after letting the phone sleep for a bit (2 mins roughly) - it doesn't wake up from power button. Have to press long and boot again.
## Is D2W there? "DoubleTap2Wake" ? Are you sure you have a good touch? (this maybe 20% sounds related to your TWRP touch going crazy..)
Click to expand...
Click to collapse
No, D2W is not there. The phone is totally unresponsive to the power button as well as D2W. When in TWRP the touchscreen functions fine until it freezes at some random moment.
ryankabir said:
Cannot get XFSTK to detect the device (Windows says: USB device not recognized or something like that).
## There's this awesome invention called DRIVERS... and we're lucky in this case (cuz I bricked an hour after I bought it) because Intel PC + Intel Phone = Yay... There is even.... a very specific "INTEL ASUS WINDOWS DRIVER" file... from the INTEL AND ASUS WEBSITE... or maybe your USB CABLE is f**? My point is... another unrelated issue where it sounds like you've not even tried it properly before complaining.. I like helping people. I don't like when people refuse to try or they skip the actual study-notes to do it... I used the EXACT same guide to unbrick and it worked in 2 mins... I'm on a 2007 Laptop which overheats if I use 4 tabs... how am I able to follow the exact same guide on a brand new "FULLY BRICKED" phone... it literally would vibrate after trying power button for 5 mins and be stuck in a "blank black screen" for hours and hours... No twrp no nothing.. and I did it - why didn't you? Same guide man...
Click to expand...
Click to collapse
Yes I know what drivers are :good: - I've tried IntelSoc, Intel ASUS etc... all drivers that are somewhere mentioned I have installed. Before the charging problem I was able to connect the phone and access files fine as well.
ryankabir said:
When the USB cable is inserted into the device, it sometimes looks like the power+vol up combination doesn't do anything when booting (either the screen stays black or it tries to boot into CM13 and fail.)
## Try again. Sometimes people accidentally hit power to early.. or whatever.. It's not a MK2 Fatality.. don't force yourself to get it exact.. Let the menu pop up... just wait a second and scroll up/down just to see if that works... then scroll to Boot-Recov and gently hit power+vUp.. should be fine.. otherwise just .. literally try 10 times.. it WILL work.
Click to expand...
Click to collapse
Thanks, will try more!
ryankabir said:
Since TWRP seems so unstable, I wanted to reflash everything using the Unbrick guide via PC
## Nope.. TWRP is like Bret Hart. It isn't unstable. Not for LP not MM not for N. Not for Stock Not for CM Not for AOSP. You *wanted* to do what you should have done right at the beginning but you didn't get that done properly (see below)
Click to expand...
Click to collapse
TWRP is indeed fine and stable! However, it freezes and reboots my phone so in my particular situation it is currently not stable. Therefore the need to completely wipe the phone and start from fresh.
ryankabir said:
Essentially you have 8 different unrelated issues (and the biggest one is not reading guides, not trying hard enough and just thinking that people like me sit around and get paid for this)... and want ans in one place w/o just doing the simple thing of going back to everything stock...?? *it's just annoying cuz people who want to help will feel like.... others don't even try simply because we exist and have desire to help...* - I am not trying to offend you but I hope you get my pov.
Click to expand...
Click to collapse
Appreciate your POV. I know how it feels like if people ask for help for something they could have read easily somewhere. I'm thankfull for all the guides that people have written on here! I'm asking for help because in my situation the guides are not working and would like to have a full clean wipe of my phone and fix all possible software issues before trowing away the phone because of hardware fault.
ryankabir said:
Do This EXACTLY
#Buy a cable. Borrow a cable. Whatever you do be 1000000% sure the USB Cable is fine
#Install Intel Asus Android drivers from official EXE (google it... don't add new post for that link)
AND THEN
Follow the same Unbrick guide word for word *but* just pay close attention to these:-
IntelSeC Driver + device detected even if OFF (start>devman>showall>intelsec
In the official unbrick utility make sure you're on the second tab at the bottom
In settings check that your device flag is 0x08..... whatever instead of the default 0x000
Back in the *second tab at the bottom* (i don't remember exact name but it's in the guide) -- put the right files (mentioned in guide) in the right boxes.. (mentioned in guide) and remember you ONLY need the DVFWthingy... + TOKENthingy + IFWthingy
Plug the Zen in... hear the "da-dumm" sound... keep looking at the Unbrick tool.. and the moment you see Device Detected = 1 you hit install/start...
AFTER that is fully done *(and if you fail don't post just repeat from scratch)... I don't personally recommend Asus Flash tool it was acting dodgy for me but instead grab the RAW Stock... Rename it to zip.. open it and grab the img files and fastboot flash the fastboot droidboot.img + splashscreen splash.img + boot boot.img + recovery recovery.img
If you've followed all that from the guide and double checked what I've put up there.. you should be fine if you just fastboot reboot bootloader... and go into stock recovery... install zip/update and put your stock OS in there..
Done.
Just please take my advice and don't skim through guides, don't think you don't need to read something, don't click stuff without double checking every line from guide, print it out on PAPER if you need to.... but please don't post like this... and don't use different guides or you will be stuck (as your heading stated..)
Forget everything you knew. Close all other tabs and use this guide thoroughly for Reference:-
https://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840
Click to expand...
Click to collapse
Thanks for the suggestion and will try this!
timbernot said:
Wow @ryankabir
one step at a time hey
xFSTK is used to bring temp bootloader to hard bricked devices .
He has stock LP bootloader and all avenues to repair should be explored first
If anyone needs to unbrick , there is a thread in my signature below ,shows how to go from complete brick , to restoring serial number and into system within 15mins
Click to expand...
Click to collapse
I've tried your guide but I still have been unable to get a connection with ASUS Flashtool. The phone does keep itself relatively stable in bootloader (don't know what fixed it) - I am able to cycle through normalboot, recovery options etc without it crashing. The bootloader shows "Continue the fastboot process". I have tried different drivers, while rebooting between install/uninstall of drivers.
Thanks again all for the help
@j4y_ha
Goodluck
timbernot said:
@j4y_ha
Goodluck
Click to expand...
Click to collapse
Right m8 , we gonna fix your phone .
Do not stray from this guide.
Stick to it and you will be more the wiser when you have finished .
1 boot to boot loader ...scroll to 'power off ' and select it.
2 Connect your phone to wall charger ...let it charge till full.
When that's done , we ready for next step
timbernot said:
Wow @ryankabir
one step at a time hey
xFSTK is used to bring temp bootloader to hard bricked devices .
He has stock LP bootloader and all avenues to repair should be explored first
If anyone needs to unbrick , there is a thread in my signature below ,shows how to go from complete brick , to restoring serial number and into system within 15mins
Click to expand...
Click to collapse
Just a bit curious what the smileys in line 1 and 2 actually meant.. any hidden snarkasm these?
As for the LP stock BL he has.. after reading through the various (and really insane bugs)... I do not agree with your suggestion to explore all avenues to repair... - and my reasoning for that is... because he got stuck and paralleled different guides... i can understand the urge to have one full fix instead of going all from empty... but i'm basically thinking that if he has put in CM13 then that guide has one Unblock BL (via MMBL) - we can't be sure which one he used (downgrade to LP, unlock then upgrade etc)... + tinkering with TWRP again was it the same twrp thats with CM13.. no way to be certain
So essentially he could be fixing it al but we often totally overlook TX " RR... becausee his type has ben Mania
Cons:
Cant really tell what v BL he has.. and maybe you can try all fixes menrion
£ not a nassuve breakast
I'll try a pros/cons thing...
Pro
Th XT tool as we both said phenoenal (including prerequisites), I am assuming your footer contains the same line I pasted?
Also with his touch screen and semi-sleep state etc - could cause someone to get a permanent bootloop
There could be other mods / zips which simply outwrite each other ldurng etcs.. Now the way you're suggesting... lets say I do that.. how which one touches which sys etc would just
Con
There is defin
Mmbl came about around July 16, he run cm 13 Feb 16.
.173 or .177 is unlocked or locked LP Boot loader.
xFSTK is to gain temp Boot loader.
He gets recognised in fastboot.
He can flash stock recovery .
He can sideload .
.
.
But
Can he ?
That's not sn ide btw
Well I'm not gonna dig too deep into the twrp touch issues (there could be conflicting drivers or even something weird i noticed in twrp302 anything below 20% batt (or if batstats corrupt) then the touch goes craycray.. so lets ignore that..
this thread is getting too heavy i won't have time - so - you can always backup ur data partition so no worries there.. nothing to lose..
one problem at a time.. as I said in first post my phone was bricked much worse i had mismatched fastdroidboot and bootimg and after pressing power on maybe 4-5 times.. it would only turn on once.. sometimes on and immediately off... sometimes on stuck on logo.. sometimes on and no logo but screen is black (corrupt splash)..
so lets just try to go baaaaaack to the futureeeeeee ... Ok I found the script I made (after 8 hours of trying EVERY combination from different guides I just took individual components and made my own.. ) -
I'm writing this in a hurry so please use my first reply to get the XFTS Ubrick Guide for the Files + get the LOLLIPOP One Click BL Unlock + Lollipop Raw image... Their Guide wants you to use Asus Flash but that program failed me every time... so I have got a differnt way to do it..
I'm copying this directly from my own script (so you can change if any paths/names different)... but do not change the order or sequence
Using OneClick (keep the unlock1234 files saved separately for later use)...
If you have these unlocked I just say do it again anyway - no harm...
Unlock Bootloader for LP Stock (even if you have MM you must downgrade by this same method)
Code:
#flash old droidboot for LP stock Bootloader
fastboot flash fastboot droidboot_2_20_40_197.img
fastboot reboot-bootloader
# must run reboot bootloader once with this droidboot before continuing - dn't skip this
# unlock bootloader (use files provided inside oneclick tool but instead of using their script, manually do it - more reliable)
fastboot oem start_partitioning
fastboot flash /tmp/start.sh tools/unlock1
fastboot flash /tmp/recovery.launcher tools/unlock2
fastboot flash /system/bin/logcat tools/unlock3
fastboot flash /tmp/unlock tools/unlock4
fastboot oem stop_partitioning
#if you get failed/error at oem stop - reboot to Bootloader (VOLUP+Power long press -
Release power at Asus Logo or long vibration) and re-do the last step
#if all done so far
fastboot reboot-bootloader
#white Asus logo means unlocked loader
fastboot flash recovery twrp3.img
reboot-bootloader
#toggle Up to choose Recovery - quick tap VOLUP+Power
#twrp will start
install Custom_MM_Rom.zip
#likely it will fail giving IFW 7 error - (intentionally did NOT put MM BL here), so
install Asus_MM_WW_420_184.zip (stock on stock only)
#let it be fully done, verify working MM stock OS
#check if it works - *sign* test your touch screen quickly and in dev tools Keep Debugging ENabled
#then power off - or if you have more options directly choose reboot
#during reboot vibration hit VOLUP+P to Fastboot
####RE-DO Entire first half again
fastboot flash fastboot droidboot_2_20_40_184.img
fastboot reboot-bootloader
# must run once with this droidboot before continuing
# unlock bootloader
fastboot oem start_partitioning
fastboot flash /tmp/start.sh tools/unlock1
fastboot flash /tmp/recovery.launcher tools/unlock2
fastboot flash /system/bin/logcat tools/unlock3
fastboot flash /tmp/unlock tools/unlock4
fastboot oem stop_partitioning
fastboot reboot-bootloader
#now only flash certain MM files (the rest should already be there from stock upgrade) - if you have different MM Img (if they release new one in future - all readers just need to ensure the TOKEN DNX IfW matching)
${FASTBOOTBINARY} flash splashscreen tools/splashscreen_551.img
fastboot flash token tools/bom-token_ze551ml_4_21_40_134.bin
fastboot flash dnx dnx_ze551ml_4_21_40_134.bin
fastboot flash ifwi ifwi_ze551ml_4_21_40_134.bin
fastboot flash fastboot droidboot_4_21_40_134.img
fastboot reboot-bootloader
#should now see black splashscreen + little red error msg for 2 seconds
#entering twrp again by toggling Recovery-> VOLUP+P
install superuser.zip
wipe cache + data
install yourcustomROM.zip
ryankabir said:
Just a bit curious what the smileys in line 1 and 2 actually meant.. any hidden snarkasm these?
As for the LP stock BL he has.. after reading through the various (and really insane bugs)... I do not agree with your suggestion to explore all avenues to repair... - and my reasoning for that is... because he got stuck and paralleled different guides... i can understand the urge to have one full fix instead of going all from empty... but i'm basically thinking that if he has put in CM13 then that guide has one Unblock BL (via MMBL) - we can't be sure which one he used (downgrade to LP, unlock then upgrade etc)... + tinkering with TWRP again was it the same twrp thats with CM13.. no way to be certain
So essentially he could be fixing it al but we often totally overlook TX " RR... becausee his type has ben Mania
Cons:
Cant really tell what v BL he has.. and maybe you can try all fixes menrion
£ not a nassuve breakast
I'll try a pros/cons thing...
Pro
Th XT tool as we both said phenoenal (including prerequisites), I am assuming your footer contains the same line I pasted?
Also with his touch screen and semi-sleep state etc - could cause someone to get a permanent bootloop
There could be other mods / zips which simply outwrite each other ldurng etcs.. Now the way you're suggesting... lets say I do that.. how which one touches which sys etc would just
Con
There is defin
Click to expand...
Click to collapse
Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting
metadeivid said:
Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting
Click to expand...
Click to collapse
Has anyone solution for this? I have same issue.
Hello,
You need to put your phone into Qualcomm Dloader mode again.
On the main board of your phone, there is a way to short-connect some two pins to enable the Qualcomm Dloader
and then you need QFIL to load the recovery files onto the phone to enable the normal android download mode.
---------- Post added at 01:50 AM ---------- Previous post was at 01:48 AM ----------
Ask someone who has a octopus box to fix your phone - They can DO it with USB-OVER-NETWORK