Develop Bugs

Can't boot any rom

flashed freedon 1.6 , cm13 no rom is booting through twrp
ps :- using official twrp

Freedom 1.6 is i think based on cb 3.5.2 for that u need modified twrp for now boot into twrp if u r able to boot into twrp than flash 3.2.4 n move forward to any desired roms u want.

rakesh595160 said:
Freedom 1.6 is i think based on cb 3.5.2 for that u need modified twrp for now boot into twrp if u r able to boot into twrp than flash 3.2.4 n move forward to any desired roms u want.
Click to expand...
Click to collapse
FOS 1.6 is based on 3.2.7 stable, not CB. Works with official TWRP.
Sent from my OnePlus 3 using Tapatalk

Update for Who wants to go to the 4.4 kernel ROMs you need? I have the answer to see

Zui 2.5 confirmed that it is necessary to install roms with kernel 4.4, it does not need zui 3.5 (in my case I had already installed zui 2.5 indiana as my rom and I decided to go for custom roms and today I use them with kernel 4.4 without having to install 3.5 zui per qpst)

I haven't unlocked my device yet.. but I'm planning to flash custom rom. currently I'm using zui 2.5 the official one. So you are saying that I can just 1)unlock my device 2) flash twrp and flash the latest version of aex (pie) without flashing zui 3.5/3.7 via qpst??.. I know your post says it but did you face any problem???.. (I'm new to this)..

Shrey2793 said:
I haven't unlocked my device yet.. but I'm planning to flash custom rom. currently I'm using zui 2.5 the official one. So you are saying that I can just 1)unlock my device 2) flash twrp and flash the latest version of aex (pie) without flashing zui 3.5/3.7 via qpst??.. I know your post says it but did you face any problem???.. (I'm new to this)..
Click to expand...
Click to collapse
Friend I just left the aex pie to na bootleggers. Yes you just need to unblock the bootloader and install twrp as a recovery, after that you need to do the following: First install the factory, then watch the twrp treble (reinstall back to twrp) and install rom and gapps and what you want

Shrey2793 said:
I haven't unlocked my device yet.. but I'm planning to flash custom rom. currently I'm using zui 2.5 the official one. So you are saying that I can just 1)unlock my device 2) flash twrp and flash the latest version of aex (pie) without flashing zui 3.5/3.7 via qpst??.. I know your post says it but did you face any problem???.. (I'm new to this)..
Click to expand...
Click to collapse
How many errors etc ... none so far. You have to have zui 2.5 Indian to do what I did!
I left aex pie because there is a bug in the download to download anything has to be completely on the page for example I want to download a game and I can not leave it in the background and I can not let the screen erase because the download pauses

If you want to install only nougat based custom roms, zui 2.5 indian baseband is fine. But if you want to use oreo or pie roms, you need to flash at least zui 3.5. I've used oreo roms on zui 2.5 baseband and it gives you Little glitches here and there and offline charging doesn't work.

brother_mouzone said:
If you want to install only nougat based custom roms, zui 2.5 indian baseband is fine. But if you want to use oreo or pie roms, you need to flash at least zui 3.5. I've used oreo roms on zui 2.5 baseband and it gives you Little glitches here and there and offline charging doesn't work.
Click to expand...
Click to collapse
Friend here works all up to offline loading (I'm using it on bootleggers Pie)

HYBRID Oreo 8.0.0 - TWRP Flashable - FULL UPDATE - VER: WW-15.0410.1904.104

ASUS - ZenFone 4 Pro - Z01G
Android 8.0.0 OREO
Version: WW-15.0410.1904.104​
*** WARNING ***
This Flashable Zip is NOT coded to prevent cross-flashing. If flashing is initiated on an unsupported device it WILL brick the device.
YOU ASSUME ALL RESPONSIBILITY!!​
Notes:
This package was designed to allow everyone who has a ASUS ZenFone 4 Pro - ZS511KL and an operational TWRP recovery to fully update to the latest device software. This software can also help restore a devices functionality. It is meant for WW-Phones not JP-Phones.
This zip was built off the official WW-15.0410.1904.104 update posted on the ASUS website.
- The system partition is unchanged.
- Stock firmware's are included from the official OTA.
- The recovery.img has been replaced with an Unofficial TWRP 3.2.1-0 built with the latest device kernel for OREO.
- The boot.img has been patched to disable DM-Verity.
Installation:
Wipe the Dalvik, System, Data, and Cache
Transfer Zip
Flash
Reboot
Enjoy
Download Link
Thanks to shakalaca for his efforts in getting TWRP to our devices!!

TheCapesCrew said:
ASUS - ZenFone 4 Pro - Z01G
Android 8.0.0 OREO
Version: WW-15.0410.1904.104
*** WARNING ***
This Flashable Zip is NOT coded to prevent cross-flashing. If flashing is initiated on an unsupported device it WILL brick the device.
YOU ASSUME ALL RESPONSIBILITY!!
Notes:
This package was designed to allow everyone who has a ASUS ZenFone 4 Pro - ZS511KL and an operational TWRP recovery to fully update to the latest device software. This software can also help restore a devices functionality. It is meant for WW-Phones not JP-Phones.
This zip was built off the official WW-15.0410.1904.104 update posted on the ASUS website.
- The system partition is unchanged.
- Stock firmware's are included from the official OTA.
- The recovery.img has been replaced with an Unofficial TWRP 3.2.1-0 built with the latest device kernel for OREO.
- The boot.img has been patched to disable DM-Verity.
Installation:
Wipe the Dalvik, System, Data, and Cache
Transfer Zip
Flash
Reboot
Enjoy
Download Link
Thanks to shakalaca for his efforts in getting TWRP to our devices!!
Click to expand...
Click to collapse
Nice. Works for me

Magisk and Data
Thank you for share your work TheCapesCrew. I Just download the rom and I should flash it today.
I'd like to know if it already comes with magisk or if I can follow the standard procedure to install it.
Should I use the boot.img inside your rom, or the original from ASUS website to add magisk to the system?
And there's anyway to flash your rom without data loss?
I'm currently with version WW_ZS551KL_15.0410.1812.95_0 version with magisk 19.2 and TWRP 3.2.3-0-Z01G on my Zenfone 4 pro.
Thank you so much!

You should be able to flash right over. I would stick with my bootloader since it matches the kernel version and recovery kernel. The recovery I included has the correct kernel also. I actually compiled a twrp that's newer. 3.3.1, just haven't published it yet.

Update
TheCapesCrew said:
You should be able to flash right over. I would stick with my bootloader since it matches the kernel version and recovery kernel. The recovery I included has the correct kernel also. I actually compiled a twrp that's newer. 3.3.1, just haven't published it yet.
Click to expand...
Click to collapse
Hey TheCapesCrew, I hope you are doing good.
Did you keep working on ZenFone 4 Pro images?
I'd like to know if you did any newer image flashable for this phone.
Thank you very much!

Hi,
How are you there. Can you make android 9.0 rom for this phone. thank you

Make android 9/10 custom rom, please ...

[newbie] Few questions before going full custom

Hello!
I currently have completely stock and BL locked M1803E7SG 3/32, on MIUI 10.3.1.0 Stable Pie.
Tomorrow is my big day, timer in MIUI unlocker will finaly allow me to completely mod my device.
I did some modding a long time ago on Xperia X10/Xperia Play (old 2.3.3 Gingerbread times), but many things changed nowadays, so I have few questions:
1) Firmware - is it something like low-level SoC driver pack included in official releases? Back in a day nothing like that was updated/changed. I have latest stable Pie so that point shouldn't be a problem beacuse I will flash Pie FW compatible ROM, just want to confirm my understanding there.
2) ARB - as far as I'm concerned, this thing has no meaning if I'll flash Pie AOSP ROM over stock Pie MIUI right?
3) Kernels - again, back in a day kernels were completely separate from ROMs itself, do modern ROMs require kernel flash when going from official MIUI to AOSP-based ROM? Or is AOSP-compatible kernel already included in ROM .zip?
I want to use this one:
https://forum.xda-developers.com/redmi-note-5-pro/development/rom-cosp-t3891988
Another thing about kernels, I want to use latest PureCAF, do i need to flash it before ROM .zip or after?
So my path should be like that:
Official MIUI Pie + stock kernel + locked BL
1. Unlock BL via official Xiaomi tool
2. Flash latest TWRP thru fastboot, boot into it, flash Lazyflasher thru TWRP
3. Perform a wipe (dalvik, system, cache, data)
4. Flash ROM .zip thru TWRP, flash Gapps.
5. Flash PureCaf .zip thru TWRP again
6. Reboot into clean&fast new phone?

Oxynium said:
Hello!
I currently have completely stock and BL locked M1803E7SG 3/32, on MIUI 10.3.1.0 Stable Pie.
Tomorrow is my big day, timer in MIUI unlocker will finaly allow me to completely mod my device.
I did some modding a long time ago on Xperia X10/Xperia Play (old 2.3.3 Gingerbread times), but many things changed nowadays, so I have few questions:
1) Firmware - is it something like low-level SoC driver pack included in official releases? Back in a day nothing like that was updated/changed. I have latest stable Pie so that point shouldn't be a problem beacuse I will flash Pie FW compatible ROM, just want to confirm my understanding there.
2) ARB - as far as I'm concerned, this thing has no meaning if I'll flash Pie AOSP ROM over stock Pie MIUI right?
3) Kernels - again, back in a day kernels were completely separate from ROMs itself, do modern ROMs require kernel flash when going from official MIUI to AOSP-based ROM? Or is AOSP-compatible kernel already included in ROM .zip?
I want to use this one:
https://forum.xda-developers.com/redmi-note-5-pro/development/rom-cosp-t3891988
Another thing about kernels, I want to use latest PureCAF, do i need to flash it before ROM .zip or after?
So my path should be like that:
Official MIUI Pie + stock kernel + locked BL
1. Unlock BL via official Xiaomi tool
2. Flash latest TWRP thru fastboot, boot into it, flash Lazyflasher thru TWRP
3. Perform a wipe (dalvik, system, cache, data)
4. Flash ROM .zip thru TWRP, flash Gapps.
5. Flash PureCaf .zip thru TWRP again
6. Reboot into clean&fast new phone?
Click to expand...
Click to collapse
1. Don't care about that driver, the only thing you need to pay attention is the rom based on oreo or pie fw. The other thing you need to know is if the custom recovery compatible with pie fw or not, i recommend latest OrangeFox R10 RC3.1 as it's unified for both oreo and pie fw.
2. ARB has almost no meaning now, old arb3 fw is just too outdated and not recommended to use as lots of roms now moving on to pie fw which makes this even more meaningless now.
3. No, compatible kernel is now included in the rom zip itself, although you can choose to flash another custom kernel based on your taste for better performance or battery backup, noted that some kernel only supports aosp, some only for miui, some for both and some only supports pie/oreo fw.
4. Your step is right, but you'll need to flash dummy.img (just google whyred dummy.img) before you can flash other in fastboot, Orangefox doesn't require lazyflasher, TWRP does. For Gapps, read careful if the rom already includes it or not (Pixel Experience for example), miui based like xiaomi.eu doesn't need it too, custom kernel is flashed after rom.

sushuguru said:
1. Don't care about that driver, the only thing you need to pay attention is the rom based on oreo or pie fw. The other thing you need to know is if the custom recovery compatible with pie fw or not, i recommend latest OrangeFox R10 RC3.1 as it's unified for both oreo and pie fw.
2. ARB has almost no meaning now, old arb3 fw is just too outdated and not recommended to use as lots of roms now moving on to pie fw which makes this even more meaningless now.
3. No, compatible kernel is now included in the rom zip itself, although you can choose to flash another custom kernel based on your taste for better performance or battery backup, noted that some kernel only supports aosp, some only for miui, some for both and some only supports pie/oreo fw.
4. Your step is right, but you'll need to flash dummy.img (just google whyred dummy.img) before you can flash other in fastboot, Orangefox doesn't require lazyflasher, TWRP does. For Gapps, read careful if the rom already includes it or not (Pixel Experience for example), miui based like xiaomi.eu doesn't need it too, custom kernel is flashed after rom.
Click to expand...
Click to collapse
Hi where can I download the RC10 version of orangefox? Looking in the development thread, the source forge page has RC9 as the latest.
Sent from my Redmi Note 5 using Tapatalk

gsmyth said:
Hi where can I download the RC10 version of orangefox? Looking in the development thread, the source forge page has RC9 as the latest.
Click to expand...
Click to collapse
https://files.orangefox.website/OrangeFox Beta/whyred/

sushuguru said:
https://files.orangefox.website/OrangeFox Beta/whyred/
Click to expand...
Click to collapse
Hi,
Can you please guide me as well? I'm on same boat as OP.
I have to unlock BL and install custom ROM. I'm on MIUI 10.0.6.0 Oreo (Indian whyred).
I can just follow this thread right?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/one-xiaomi-redmi-note-5-whyred-unlock-t3778049
And I want to install Pixel Experience ROM. And what's about this fw-less ROM!
So, for PE Pie ROM, I just install the other recovery (Orangefox) instead of twrp. Everything else is same right.
1. Unlock BL from the main thread
2.Install Orangefox recovery
3.Flash ROM
Thanks

Android Marshmallow 6 > Android Pie 9 (stock to stock, TWRP, root, xposed)

Android Marshmallow 6 >>> Android Pie 9
[stock, custom recovery, root, xposed]
I haven't updated my OP3 for a long time and actually forgot the right steps to proceed correctly with updating, stock to stock, clean install, root.
Maybe someone is willing to put a primitve list of steps to manage the update. No links please, minimal efforts.
encrypted
current
Android 6.0.1 (marshmallow) OxygenOS 3.2.2 stock
TWRP 3.0.2-1
ElementalX
Xposed
target
Android 9.0.5 (pie) Oxygen stock
TWRP (3.3.1-0 AFAICS)
SuperSU flashing?
ElementalX
Xposed (systemless if possible > Magisk ..EdXposed necessary?) (mostly to use XprivacyLua)
AFAIK stock-img contains firmware/radio, so flashing stock-imgs won't require further updates, guess so.
Appreciation for your help!
___