My Phone got hard bricked (possible dead) - Nexus 5X Q&A, Help & Troubleshooting

Hey I was flashing downgrade to fix issue with my Wifi Mac but its its not happened instead my phone got hard bricked after I am pretty sure I have valid version of flash zip (from google) 6.0.1 last. but its got hard brick anyway! so After a lot searching I find this article:
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
but when I follow this article first time its failed so I reconnect my phone after plug and I didn't see that pc detect my phone at all! normally its show Qualcomm HS-USB QDLoader 9008 (Port COM6) but now nothing.
Please help me out!

Anyone?

Related

S4 Mini GT-I9195 HARD BRICK

Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
azzurra01 said:
Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
Click to expand...
Click to collapse
Debrick image should bring it partially to life, how did you prepare for the sd card? Which debrick image did you use?

Need help with hardbrick

I wanted to port MIUI on the Robin, found Xiaomi mi4c, which were good enough to port miui from. downloaded, edited boot, and pushed to phone. then i flashed it, clicked "reboot to system" and then it turnes off. It is not reacting on buttons or that sort of thing. When i connected to pc i had qhsusb.. but after flashing drivers it is qualcomm hs-usb dloader 9008 (COM9). I found nothing about unbricking, not found needed files for QFIL unbrick? Please help with smth

HELP: help me fix my HARD BRICKED device

Dear friends
I have a Wileyfox Swift phone bricked after trying to fastboot flash another OS.
Unfortunately It's completely dead now: It doesn't turn on, Its doesn't blink or shows no sign of connecting or recharging... In fact it is the pure meaning of a hard bricked phone
I tried many procedure and none of them worked. The phone is recognized by PC and is shown as "Qualcomm HS-USB QDLoader 9008" in Device Manager (I installed driver).
It would be appreciated soooo much if you could help me with this situation... Please...

Brick black screen Qualcomm HS-USB QDLoader 9008 (COM20). I need help please

Upgrade:
I need some files to run QFIL:
prog_emmc_firehose_8996.mbn (.elf)
rawprogram0.xml
patch0.xml
https://forum.xda-developers.com/ha...e-progemmcfirehose8996-mbn-elf-qfil-t3867750/
---------------------
Brick black screen Qualcomm HS-USB QDLoader 9008 (COM20). I need help please
Please, I need a lot of help. I will give you all the details I can.
I have always used the following ROM:
G891AUCS2API2_CL8737252_QB10881022_REV02_user_low_ship_MULTI_CERT
I have never had problems with this ROM. I wanted to try the AT & T ROM pirmera (it's an official ROM) and I installed it with modified Odin3 3.12. I have always used this Odin without problem. The ROM that has generated the problem is this:
SM-G891A_G891AUCU1APG7_ATT_Full_Repair_Frimware
I installed it with the same options as ROM REV02, so the problem is not Odin's. I think the problem is having downloaded Android version.
When I installed the ATT_Full_Repair_Frimware ROM, Odin said there was success. However, the phone did not turn on.
I tried to charge the phone, without success. Neither does any combination of buttons work.
When I connected the mobile to the computer, a driver was installed:
Qualcomm HS-USB QDLoader 9008 (COM20)
I also think that I read something from QFIL.
This is the only thing I have achieved. Odin does not work in this mode. I'm finding some weird Internet programs:
qpst.win_.2.7_installer_00472.4
Qualcomm Premium Tool V2.4 cracked + WORKING KEYGEN
This is a very difficult case for me and the people in my group of computer friends do not have the ability to solve this problem either. Only XDA can help me.
@NotSoMiniGun, please.
@Slade8525, please.
@activefan01, please.

Qualcomm HS-USB QDLoader 9008 Issue

Hello,
My device randomly shut down the other day and won't come back to life at all.
It doesn't go into fastboot or recovery mode, it just shows up in windows as Qualcomm HS-USB QDLoader 9008. From what I understand, this means the phone is in "EDL Mode"?
I have tried:
- Letting the battery completely drain and attempt to turn it on
- Using the recovery tools Google provides
- Using android platform tools to trigger fastboot/recovery
Nothing seems to be working at the moment. I am a bit noob-ish, so maybe there's a troubleshooting step I missed?
I'd like to get this device recovered. Has anyone run into this issue and solved it? Any advice is appreciated!
Thanks in advance!
Unfortunately there is no way to recover the device, as the software and files required are not publicly available. You could have it repaired but they will just replace the main board.

Categories

Resources