though already posted in the general help thread, I haven't received any reply so starting a new thread.
hey guys first post here so bear with me. Ever since I did the ota update on my ZE551ML of android 6.0 I have been facing problems. Lags, Bugs,hangs everything. So I went into the recovery and wiped data/ factory format. Now that has created a whole set of new problems. Now my phone is stuck on welcome screen(The first screen where you select the languages). There are 3 options there of changing language, emergency call and the next button arrow but unfortunately none of them are working. All three are non responsive but if i press the volume key then the onscreen volume slider comes which is responsive with the touch as well and also If I hold the power key then I can restart and switch off as well so my touch is fine.
I tried adb and fastboot commands to flash different firmware and they all get completed successfully but still when I start the phone, the same screen shows.
Also tried flashing raw firmware using asus flash tool but still the screen is same non responsive.
Please help me on this.
Asus Zenfone 2 ZE551ML
Last flashed raw file- WW_ZE551ML_2.15.40.13_20150506
some solution?
Any update on this?
Related
2 days ago i was playing with my touch diamond and it held when i switched on WIFI (wifi was working fone for a year now). When i rebooted the phone froze at the screen where Touch Diamond is written and at bottom right some info regarding ROM/Radio/SPL etc (R 1.09.25.23 G 52.51.25.26H D 2.03.00.00).
Tried many times but couldn't boot it . Just when i was about to get hopeless it started booting if i hold volume down, enter and press reset pin on the screen still taking too long. As i had stock HTC ROM so i upgraded it to the latest to see if it solves the problem. After upgrade phone would still boot randomly by trying the Reset pin and the mentioned button but after a few trys that also stopped working.
Now the phone is stuck on the same black screen, i can only resintall the latest Rom and All the way mentioned on the forums dont work for me i have tried signed unsiged soft and hard spl or direct Custom ROM upgrades but nothing goes beyond 0 %.
All the SPL upgrade articles require to copy jump spl. exe to the phone but i can do that as i am unable to create a Active Sync relationship (Eventhough i have tried upgrade by manually going into the tri color screen by holding volume down button while booting it).
The Hard Reset option allows me to hard reset but has no effect on the phone's condition.
anybody who could help me out here?
I have a asus zenfone 2 (ml550/a008) .The phone worked fine till 2 weeks ago and then suddenly got stuck in safe mode with no access to settings or dialer.
I tried to factory reset and reinstall latest firmware but had the phone start only in safe mode.
I then installed unlocked bootloader, twrp and cyanogenmod latest nightly. The installation went fine and cyanogenmod booted till the first screen to choose language and then the screen completely went black.
I tehn went and reinstalled bliss rom for the same fone . Once again it installed perfectly but then went on to show a black screen when I went into settings or screen. The touch screen gives a haptic feedback suggesting that it is responsive
I am completely at a loss as to how to resolve this.
Please help!!!!!!!
Hi there! Long time user but this will be my first post as I've exhausted all options. A while back i rooted my G3 on marsh mellow, everything was fine until one day it entered a bootloop in my pocket. I went about using the TOT method on androidrootz (I'm not allowed to post urls yet) to revive it as my recovery seemed to have been erased during the bootloop. After much trial and error I got the LG Flash tool to work! but not completely Using upgrade dl gives me the 3 at the end but then continues to bootloop, I tried doing a manual factory reset but it only flashed the factory reset screen and then continued into the boot loop. Another method suggested was to use Board dl, I also had success with that but I brings me to a new problem. After finishing the flash tool it boots to the mini OS and displays Auto Touch Test: Dont' touch the screen! but the screen is completely unresponsive and I can't even tap okay to clear the window. Holding down the power button while tapping does nothing and a manual factory reset doesn't either! So I'm stumped, any help would be appreciated! I feel like I'm so close to having it fixed but i just need that one piece. I either need to solve the bootloop with upgrade dl or the unresponsive mini OS with board dl.
Hello,
I recently tried to update this device with the latest MALAY MOD rom.
The problem was that I didn't had the option to remove all data while updating. Thus resulting in an corrupt install.
I need to get into recovery mode now to install the rom from there, however I do not know how to enter recovery. I've tried all the possible ways that I could find without result.
The touchscreen buttons don't seem to give input to the device.
The reset button immediately shuts off the device, while holding it the unit stays off. When released the device starts up and gets stuck on boot logo.
Does anyone have an idea?
Hello everyone, Please someone could help me with this problem, I know it has a solution but I'm new to this area, for helping me.
Same issue still searching on this forum for something. Don't understand what is the use of RST key provided when it doesn't work as expected.
Hey, so I bought a new Zenfone 2 which arrived yesterday.
But it had only Android 5.0 on it with no option to update the system.
After some googling I found out, that I have got an CN phone, but have/need WW software.
So I tried to get Android M via this tutorial:
https://forum.xda-developers.com/zenfone2/help/how-to-upgrade-cn-version-to-ww-t3101556
I followed along, until point 4. I had no idea how to get the Firmware OTA on the phone now, as I had no option to access the phone storgae via PC?
So I thought, let's go into recovery mode, recover the system, put the OTA on the device first, and then follow the tutorial again.
But now, when I want to start the phone, this screen appears: https://i.ytimg.com/vi/T5GlOGbL4Lc/maxresdefault.jpg , then after 1-2 minutes it vibrates two times, and this screen appears again.
I think it's some kind of a bootloop, so I want to access the fastboot-mode to restore the phone somehow with a original firmware, but I can't access the fastboot mode anymore.
If I hold down [Power]+[Volume Up], the phone just vibrates two times and boots normally. If I hold down both, and release [Power] or [Volume Up] earlier (after around 5 seconds), it revolves in the same screen again.
So any idea how to save my phone?
Okay, with "xFSTK-Downlaoder" I managed to get my phone back into Fastboot Mode. Here is how to do it.
Then, post number 8 in this thread solved the problem.
I flashed a totally new Android 6.0 Marshmallow WW on my CN-Zenfone by erasing the whole memory of the phone, including recovery partition and boot table, and creating it new. Now everything works great.
If anyone needs help with this problem, feel free to contact me. (I hope I get email-notification if someone pm's me haha)