problem with my ONEPLUS A3000, Alert slider always keep Silent, no matter what the slide button, or press the volume up can not be lifted. I have tried all of the Hydrogen and Oxygen, even reset by unbrick tool.
one exception, which is normal in the third-party ROMs(cm13, cm14 and etc).
Related
Ok so, under the original lollipop silence settings, when you pressed a volume key it brought up the volume bar, with the options underneath to choose "None, Priority, All" for sounds. So I could just tap the volume key, tap priority, and go to sleep knowing there would be no sounds apart from my alarm. I could also do this at work, because it was quick and silent. It also had the advantage that when I changed it back to "All", my volume would revert back to my old setting. All easy and good.
Now though... theres two choices.
1. Tap the volume all the way down, to vibrate. The phone vibrates loudly (even if I have all vibrations turned off). Then I press it again to go to silent. Then I have to do the same in reverse (including another vibration) to get it back up to my old volume. Dumb.
2. I found out you can tap the bell icon in the volume bar to cycle between states. This at least keeps the volume on my normal setting. But it still vibrates when i cycle through it.
SO... Is there no way to go from normal to silent without the damn thing vibrating loudly? I never use vibrate, so I'd want to just deactivate this option entirely. I used to be able to do this.
I have tried play store apps which say they do this... but when I set them to the "silent" option (not their vibrate option) and ring my phone, it vibrates! Even though I have phone call vibrate set to off.
This is such a stupid change. I know people disliked the priority options (I thought they were an improvement myself), but this new system just seems so much worse than anything I've used in the last 5 years of android ownership.
Help me obi wan
If you have an unlocked bootloader you can flash a costom kernel and turn the entire vibration off.
Read this thread for instructions:http://forum.xda-developers.com/showthread.php?t=3096060
Sent from my D5503 using xda premium
Frunzdoedel said:
If you have an unlocked bootloader you can flash a costom kernel and turn the entire vibration off.
Read this thread for instructions:http://forum.xda-developers.com/showthread.php?t=3096060
Sent from my D5503 using xda premium
Click to expand...
Click to collapse
Cant unlock bootloader unfortunately.
Hello people
I am facing the following issues in my phone which is running OxygenOS 3.2.1.
1. Push notifications not coming until the phone is unlocked again
2. Alert slider causing the phone to go completely silent.
To add to the misery I was using my wifi on 2.4 GHz band but when I tried to connect to 5GHz band it does not connect and the error shows wifi connection failure. All my other devices are connected successfully to this band even my 4 year old Nexus 4 but Oneplus 3 does not seem to connect for a single time
This is really becoming disappointed for me bow after push notification and alert slider issues.
The range of 2.4 GHz wifi is not even half of what my Nexus 4 used give me.
I am using ASUR WRT 68u router.
These are very basic features of a cellphone which are required on the very first moment.
I am Totally frustrated with this device as I can't use it for my daily life!!! I don't know if people in this forum are not having any such issues with their devices.
1. push notification can be blocked when the screen is locked (to avoid that other people can see SMS for example). In the "When device is locked" option, "show all notification content" should be selected if you want notification. Also the alert slider should be on the 3rd position, the position closed to the volume up button. If you want to use the middle slider position, you need to select some apps as priority apps for notification.
2. hmmm I think it's the purpose of the alert slider... especialy in the 1st position, the further to the volume up button.
It's strange you seems to misunderstand it as when you put in silent mode, it say "silent" on the screen. I put my phone in english to be sure, maybe the translation in your language is not accurate.
Anyway the slider mode can be customized in the alert slider options.
For wifi, it seems ok for me but I can't test 5GHz at the moment.
1. Not sure if I see this behaviour but if I do isn't botherimg me.
2. I know put slider to silent and it silences the phone, this is probably my favourite feature of the phone. Completely silence the phone without even taking it out of my pocket genius.
3. Sent on my 5ghz WiFi connection.
Le_Zouave said:
1. push notification can be blocked when the screen is locked (to avoid that other people can see SMS for example). In the "When device is locked" option, "show all notification content" should be selected if you want notification. Also the alert slider should be on the 3rd position, the position closed to the volume up button. If you want to use the middle slider position, you need to select some apps as priority apps for notification.
2. hmmm I think it's the purpose of the alert slider... especialy in the 1st position, the further to the volume up button.
It's strange you seems to misunderstand it as when you put in silent mode, it say "silent" on the screen. I put my phone in english to be sure, maybe the translation in your language is not accurate.
Anyway the slider mode can be customized in the alert slider options.
For wifi, it seems ok for me but I can't test 5GHz at the moment.
Click to expand...
Click to collapse
I think you misunderstood me. Here are your replies:
1. The push notification issue is a doze mode bug since the notifications do appear and the sound plays ok until the device enters into doze mode after which there is no notification and no connectivity maintained which causes the notifications to stop, once the phone is unlocked the notifications start to appear
2. Well I know the purpose of alert slider and I am talking about when the slider is is normal position i.e. downwards, sometimes the notification sounds disappear and there is complete silence, the slider has to be cycled again by moving upward then downward to fix the issue.
for the slider, wipe your phone completely, reset it in other words.
If your slider bug still there, contact oneplus customer service to replace your phone.
and your first problem seems to be related to the second one as it enter the silent mode on it's own.
Le_Zouave said:
for the slider, wipe your phone completely, reset it in other words.
If your slider bug still there, contact oneplus customer service to replace your phone.
and your first problem seems to be related to the second one as it enter the silent mode on it's own.
Click to expand...
Click to collapse
I have completely wiped off the phone and installed 3.2.1 from the signed flashable zip... the wifi issue is still there
I will check and update about the first two issues if they're solved... I have contacted customer support but they have not provided a satisfactory response yet.
When I upgraded to 3.2.1, I had the same issues as stated above AS WELL AS an issue with VoLTE that forced me to disable LTE in order to have a decent phone call. I reverted back 3.1.2 until OnePlus gets these issues ironed out. Overall, 3.1.2 has been much better for me.
I have installed freedomOS from xda and stock ROM again.. wifi issue is resolved but push notification and alert slider issues still persist in freedomOS as well as stock ROM.. I don't have VoLTE feature here so can't test
About the random silence, did you restore apps and settings from old phonethat had automatic disturb profiles? If so, reset and do not restore...
I'm not experiencing any of these issues, only issue is the random turn off
Hi,
So I've had the phone for a couple days now, and I love it. But today I received the nougat update and I have one little (major) issue:
When in any of the none-silent notification modes, it's set to ringer only. I used to have it on vibrate only, mostly in priority mode with vibrate, so it wouldn't ring. How do I get this back? Putting the volume all the way down doesn't change it to vibrate anymore, and nor does tapping on the actual bell icon.
Thanks
I have the same problem. After update I accidentally turned volume up and now I can't turn it back to vibrate. My level of sound stops at 14% and I can't make it vibrate-only. Any ideas?
Sent from Oneplus 3
Put the alert slider to the top position
RedGoblinz said:
Put the alert slider to the top position
Click to expand...
Click to collapse
This doesn't solve the issue. You still can't have the phone vibrate to only priority notifications.
With the slider on the top position (with vibration enabled in the settings) the phone will vibrate for every notification. And if you want to switch to a "drop dead" mode with no notifications at all you would always need to go in the settings to change the vibration option of the silent profile.
Major step back by oneplus.
I want that exact same thing too. So:
Silent - silence all except alarm (with option to vibrate)
Do not disturb - all the current options + option to vibrate for the ones enabled and no sound
Ring - standard mode. Sound for all + option to vibrate.
It's strange that they've missed such a common feature.
The functionality is moved to slider now. Turn the slider all the way up to silent mode and press the grear icon to select the vibration option.
Easy. Love it much more now.
Sent from my ONEPLUS A3003 using Tapatalk
Such a glaring omission by OnePlus.
I have solved the problem by installing Ringer Modes. This app allows you to put a tile in your quick settings that will change ring modes, including Vibrate mode!
https://play.google.com/store/apps/details?id=com.cgollner.quicktiles
Dekz said:
Such a glaring omission by OnePlus.
I have solved the problem by installing Ringer Modes. This app allows you to put a tile in your quick settings that will change ring modes, including Vibrate mode!
https://play.google.com/store/apps/details?id=com.cgollner.quicktiles
Click to expand...
Click to collapse
That's not an omission. That's how it's meant to be in Nougat update. Now people will actually use the Alert Slider more often.
Personally, I love this implementation much more than before.
Sent from my ONEPLUS A3003 using Tapatalk
abobobilly said:
The functionality is moved to slider now. Turn the slider all the way up to silent mode and press the grear icon to select the vibration option.
Easy. Love it much more now.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
This seems to be terrible functionality to me. With my old Nexus phone all I needed to do was 1) Hold the Volume Down button and it would go into vibrate only mode. All it took was one button click. Now you are saying I need to: 1) Move the Alert Slider 2) Click the gear 3) Enable vibration 4) Exit out of settings page to continue what I was doing.
Four steps whereas before it only took one. That is a enormous step back in functionality in my mind.
fstbck6706 said:
This seems to be terrible functionality to me. With my old Nexus phone all I needed to do was 1) Hold the Volume Down button and it would go into vibrate only mode. All it took was one button click. Now you are saying I need to: 1) Move the Alert Slider 2) Click the gear 3) Enable vibration 4) Exit out of settings page to continue what I was doing.
Four steps whereas before it only took one. That is a enormous step back in functionality in my mind.
Click to expand...
Click to collapse
You only have to do it once, brother Once the slider is set to vibrate on silent mode, you only have to touch the slider. It's quicker than 'holding' the volume button.
Cheers.
Sent from my ONEPLUS A3003 using Tapatalk
Actually, you're right. I just tried that and it works. Now that I think about it I'm not sure why I originally assumed I'd need to select vibrate every single time.
Not bad at all just a little different than I'm used to.
I don't understand the functionality, can you explain again?
When i have vibration enabled in silent mode, how do i quickly enable and disable vibration? (before all I had to do was move the slider)
I think LOS roms still have the feature that you need
Hey,
Over the past few weeks I've been having some issues with my alert slider. When I slide it, it keeps my phone on silent mode and switching it will not change its mode. Sometimes restarting my phone will allow it to be loud again but not all the time.
Now my up volume won't work to change the ring volume when the bar at the top of the phone shows I can slide it to the right but then right before your eyes it slides back down again.
I've tried it on YouTube and the volume works as it should up and down with no issues.
I've tried multiple phones wipes, cache clearances and different ROMs and the problem is still there.
Is the problem with the alert slider flex it's self?
Thanks.
Hi,
The alert slider on my one plus 5t is not sliding to bottom (Ringer mode)
Top- Silent
Mid- Vibration
Bottom -Ringer
Is there any option to use some software or application to bring the mobile back to ringer mode,
already tried cleaning the slider still no success.
Kindly guide if anyone has solution
Thanks in advance.