USB port dead, stuck on MM beta? - AT&T Samsung Galaxy Note 4

I side loaded the MM beta and installed in recovery via SD card. But USB port is not functional so I can't ODIN back to anything. Am I stuck on the beta or is there some other way I can get the final update?
I'm using a Samsung external charger and 2 batteries for usage
Sent from my DROID Turbo using Tapatalk

stuck as far as i can see. get your port repaired.

Can you even ODIN back to 5.1?
Sent from my SAMSUNG-SM-N910A using Tapatalk

For some very strange reason, the phone connects to USB when plugged into my PC on a specific front USB port. No other port or charger will make it connect. Good enough to use ODIN I guess.
Sent from my SAMSUNG-SM-N910A using Tapatalk

mustafu said:
For some very strange reason, the phone connects to USB when plugged into my PC on a specific front USB port. No other port or charger will make it connect. Good enough to use ODIN I guess.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
can you help me with my problem?

AlexanderDAB said:
can you help me with my problem?
Click to expand...
Click to collapse
Mine seemed to be a software problem related to the MM beta. After I ODIN'd back to DOI2 build and OTA'd to official MM it started charging reliably again.
Sent from my DROID Turbo using Tapatalk

mustafu said:
Mine seemed to be a software problem related to the MM beta. After I ODIN'd back to DOI2 build and OTA'd to official MM it started charging reliably again.
Sent from my DROID Turbo using Tapatalk
Click to expand...
Click to collapse
that's great
but can you help me with something important?

Related

Phone wont charge

It says
Your phone is using more current than the charger can supply.
It happened out of nowhere too. Its weird. Any suggestions. I've tried reverting back to old Rome I had backed up. No luck. I've also tried a 3rd party extended battery. No luck there either. I originally rooted with the revolutionary root tool. How can I unroot and go to stock in case I need to have Verizon look at it ?
Sent from my Incredible 2 using XDA App
Tried different charger?
Sent from my LG-P999 using XDA App
Tried my wall charger. Car charger and USB cord. Same result. Maybe my charging port is going out ?
Sent from my Incredible 2 using XDA App
mexifro said:
Tried my wall charger. Car charger and USB cord. Same result. Maybe my charging port is going out ?
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
That could possibly be it. It seems the charging port was built poorly
Sent from my Incredible 2 using XDA App
I just held down the USB cord down with my hand and was able to charge the phone without the message popping up. Now I just need help unrooting. It seems there are two ways of unrooting depending on the way u originally rooted. I rooted with the revolutionary tool and can't find out how to unroot. I could only find instructions on how to unroot if u rooted using alpha revx
Sent from my Incredible 2 using XDA App
mexifro said:
I just held down the USB cord down with my hand and was able to charge the phone without the message popping up. Now I just need help unrooting. It seems there are two ways of unrooting depending on the way u originally rooted. I rooted with the revolutionary tool and can't find out how to unroot. I could only find instructions on how to unroot if u rooted using alpha revx
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
Works the same way, I believe.
Fenuxx said:
Works the same way, I believe.
Click to expand...
Click to collapse
it is the same way, you just need to flash the stock hboot and thats it.
also seems like the usb ports on these phones are constantly goning out it's happened twice to me on brand new dinc 2's
So I got back to the stock 2.2.1 Rom with s off by following the alpha revx unroot procedure. I want able to change my hboot though. Tomorrow I'm gonna see if I can get a replacement. Wish me luck lol
Sent from my ADR6350 using XDA App
you can change hboot by flashing cwm and root files to the phone then using adb over wifi and use the unroot guide then update to gb, i did it 2 days ago

Restoring rom (stock/custom) on phone with broken USB port???

Well topic says it all. I have a phone that has a busted port. I tried to one click restore back to stock when the port died so not only does it have a bad port it failed during flashing so it can't even boot up. What options do I have?
Sent from my SPH-D710 using Tapatalk
asdf002 said:
Well topic says it all. I have a phone that has a busted port. I tried to one click restore back to stock when the port died so not only does it have a bad port it failed during flashing so it can't even boot up. What options do I have?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Questions go in Q & A forums.
How do you know port is bad?
Sent from my SPH-D710 using xda app-developers app
Depends on where in the process the flash failed, it could be hardbricked or may need to be jtagged to rewrite the bootloader. If it won't boot into download or recovery mode and only has a solid blue led then its toast. Otherwise with a bad port and no OS you dont have many options. I honestly dont even think there's a way to flash something from stock recovery without a USB port or OS to move the zip into cache so stock recovery can flash it. And the only other option is Odin which again without a working USB won't do you any good. And like blues said questions go in Q&A you know Q(uestions)&A(nswers)
Sent from my SPH-L900 using Xparent ICS Tapatalk 2
Sorry about wrong forum.
The phone can go into recovery and download mode. I am assuming the port is broke BC I can't charge the battery through it and the computer doesn't recognize the phone when plugged in and in download mode.
This is what I feared! So phone is pretty much a paperweight. Arg...
Sent from my SPH-D710 using Tapatalk
Well I take it back, I think only a couple pins in the port is broken BC I can use the USB jig to get the phone into download mode. So the port is not completely broken. I don't know what pins are used for whatever process but charging and data sync no gooo. I have tried several dif cables including the Samsung one and a blackberry one.
Sent from my SPH-D710 using Tapatalk
asdf002 said:
Well I take it back, I think only a couple pins in the port is broken BC I can use the USB jig to get the phone into download mode. So the port is not completely broken. I don't know what pins are used for whatever process but charging and data sync no gooo. I have tried several dif cables including the Samsung one and a blackberry one.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Have you tried a different USB port? Or power block that plugs into the wall?
Sent from my SPH-D710 using xda app-developers app
Yeah tried mutliple USB ports on Mac and windows computers and three dif powerblocks.
Sent from my SPH-D710 using Tapatalk
asdf002 said:
Yeah tried mutliple USB ports on Mac and windows computers and three dif powerblocks.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Tried a different usb cable? Maybe the male pins are borked. I had one that got slightly bent and it wouldn't charge for sh*t but would let me transfer files just fine go figure
Sent from my SPH-L900 using Xparent ICS Tapatalk 2
asdf002 said:
Yeah tried mutliple USB ports on Mac and windows computers and three dif powerblocks.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Sprint will most likely decline you a replacement.
go here http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-usb-port-repair/
$40 is a little steep for my a s2
Sent from my SPH-D710 using Tapatalk
Well guess time to move on. Pins probably are misalligned.
Sent from my SPH-D710 using Tapatalk
asdf002 said:
$40 is a little steep for my a s2
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Well then you are screwed. Good luck getting a new phone if $40 is too much to send it out, get it fixed and have it back where you can flash it all day long.

Phone wont charge or connect to pc

Been running macks rom ljc for about 2 weeks now and have been noticing when I plug up my phone to charge at night it has a delayed response to notify me thats its charging..but today it has completely stopped charging. Nor will it connect to my pc. My wife has the same phone and her cord wouldn't work for mine either. Can anyone help?
Sent from my SPH-L900 using xda premium
chik7282 said:
Been running macks rom ljc for about 2 weeks now and have been noticing when I plug up my phone to charge at night it has a delayed response to notify me thats its charging..but today it has completely stopped charging. Nor will it connect to my pc. My wife has the same phone and her cord wouldn't work for mine either. Can anyone help?
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Check that your usb is not Broken .... roms usually don't do anything with charging ... sounds like a bad usb port to me
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Happened to mine a few weeks ago. I was on Jellybomb v13 with ma7. I flashed the ma5 radio and thats when it started to happen. At first it was intermittent and couldn't get it to duplicate at the sprint store(after I restored to stock rom). Finally they found out it was the usb port so now I got stuck with a refurb.
chik7282 said:
Been running macks rom ljc for about 2 weeks now and have been noticing when I plug up my phone to charge at night it has a delayed response to notify me thats its charging..but today it has completely stopped charging. Nor will it connect to my pc. My wife has the same phone and her cord wouldn't work for mine either. Can anyone help?
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Have you switched usb cords? this happend to me then i went and found the actually cord and charger that was in the box and it worked. Or maybe if you have a cover over the phone the cord may not be making good contact? Both are worth a try!! cheap and free.....

usb otg issues. Hey

Hey guys. Im having some issues with my s3 and the otg cable. So I was in the car for a road trip. And I was playing games with the otg cable and a ps3 controller. Then I put my things away and put it in my bag and fell asleep. When I woke up I tried to play a game again and when I plugged it in the notification bar kept saying " usb connecter connected" then 1 second later "usb connecter disconnect ed". Any help?
You seem to have damaged the connector by any chance ?
Sent from the state where marijuana is not illegal !
chris_marsh said:
You seem to have damaged the connector by any chance ?
Sent from the state where marijuana is not illegal !
Click to expand...
Click to collapse
My charger works fine and the cable works on other devices.
Does it work for data on other devices, or just charging.
Try another cable anyway. They do get messed up easily.
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
Does it work for data on other devices, or just charging.
Try another cable anyway. They do get messed up easily.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Like my ps3 controller works with the otg cable on other phones
Is it possible something got messed up in the phone charging port?
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
Is it possible because bot messed up in the phone charging port?
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Im pretty surr nothingd wrong with the port because I can charge my phone just fine.
itsKenneh said:
Im pretty surr nothingd wrong with the port because I can charge my phone just fine.
Click to expand...
Click to collapse
Have you rebooted it? And are you using any apps like Joystick2Touch, or the dual shock app?
I tried both qpps but nothing worked
itsKenneh said:
I tried both qpps but nothing worked
Click to expand...
Click to collapse
What ROM are you using? If stock, are you rooted?
Aerowinder said:
What ROM are you using? If stock, are you rooted?
Click to expand...
Click to collapse
Im using synergy rom. And rooted.
itsKenneh said:
Im pretty surr nothingd wrong with the port because I can charge my phone just fine.
Click to expand...
Click to collapse
The pins used for data transfer could become damaged while the ones used for charging remain intact. Works the same way on a cable too.
Sent from my SGH-T999L using xda premium
I cab also transfer data so I don't know
itsKenneh said:
I cab also transfer data so I don't know
Click to expand...
Click to collapse
Try flashing another ROM - could be a Synergy issue.
Alright ill try that.

No fast charge or pc recognition

So multiple chargers won't work on PC and will not fast charge so I can't update or go back to stock and it takes 5 hours to charge. Sprint replaced the charging port but it didn't change anything. Any ideas? I've tried multiple 5.1.1 roms and kernels but that's about all I can do it seems. Oh and I tried a full factory reset. Any assistance would be appreciated.
Sent from my SM-G920P using Tapatalk
Guess I'm the only one lol Hopefully someone has an idea, I'll be stuck with this phone for another year on 5.1.1 haha
Sent from my SM-G920P using Tapatalk
So tried flashing via Flashfire and the Bootloader didn't go through. It's a brick now, I still have download mode but no PC with any cable will recognize the device still. So I'm probably going to "upgrade" to a Nexus device. I've never had so many issues with a Samsung phone, so I'm going to stick with something more stable lol
Sent from my SM-G900P using Tapatalk

Categories

Resources