HTC One M8 Marshmallow update gone wrong? HELP! - One (M8) Q&A, Help & Troubleshooting

Alright, I will start at the beginning. I plugged my phone into my PC. HTC Sync manager popped up and told me there was an update for my device. So I was excited knowing it was the Marshmallow update. Everything was going smooth until my cable disconnected while it was installing. It failed and my phone was doing nothing. So like an idiot, I rebooted it.. Now my phone will not go past the HTC logo on boot. I tried wiping the cache partition from Android Recovery but no luck. I'm not really sure what to do at this point. My phone was not rooted, and it is *Locked*. I just want my phone back.. Any help would be so much appreciated, because I'm pretty unsure of what to do.
By the way I am not worried about saving what is on the phone. It's the HTC One M8 (Verizon).

Hi,
I'm a beginner here myself but based on what I read lately it might be possible to go into fastboot mode and flash a Lollipop RUU file.
You'll need a couple of tools on your PC (adb and fastboot) and a step by step guide, both easy to find with a quick search. The harder part is to locate the appropriate file to flash, at least I have trouble with that piece...
Good luck !

Gnondpom said:
it might be possible to go into fastboot mode and flash a Lollipop RUU file.
Click to expand...
Click to collapse
Depends on how far it got in the update. If enough of the MM update installed, LP may constitute a "downgrade", which is not allowed unless you have s-off. In that case, OP may need to use the Marshmallow RUU. But I agree, that RUU is the best bet. RUU will wipe the phone, but I think we're past the point of trying to recovery data at this point, anyway.
TO the OP, what does it say for OS number on the bootloader screen?
Presumably, the phone is s-on, as it sounds like it was never modified?
The Verizon RUUs are here: http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
Another option to flashing the RUU using fastboot, is to put the RUU zip on an SD card (if you have one) and flash. Instructions are in the link (Option 2). This is probably easiest of the options (again, assuming you have an SD card), especially if you don't have fastboot setup, and aren't familiar with it).

redpoint73 said:
Depends on how far it got in the update. If enough of the MM update installed, LP may constitute a "downgrade", which is not allowed unless you have s-off. In that case, OP may need to use the Marshmallow RUU. But I agree, that RUU is the best bet. RUU will wipe the phone, but I think we're past the point of trying to recovery data at this point, anyway.
TO the OP, what does it say for OS number on the bootloader screen?
Presumably, the phone is s-on, as it sounds like it was never modified?
The Verizon RUUs are here: http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
Another option to flashing the RUU using fastboot, is to put the RUU zip on an SD card (if you have one) and flash. Instructions are in the link (Option 2). This is probably easiest of the options (again, assuming you have an SD card), especially if you don't have fastboot setup, and aren't familiar with it).
Click to expand...
Click to collapse
OS # is (6.21.605.3) The update was just about finished before it disconnected. So I believe you are correct. I don't mind data loss, would rather just get the device functional again.
It is S-ON, it was never modified in any way. I will check out the links and see what I can do. Thank you for all the info!:good:

Related

[Q] Bootloop on GPE converted M8 after update (help!)

I recently tried updating my (previously functional) HTC One M8 I converted to a Google Play Edition phone. I hadn't realized the version of the GPE RUU was rooted, so after using Android's stock updater, the phone is busted. I've been tearing my hair out for the last six hours trying to flash something or get it to work in a way that's acceptable, but I can't seem to get access to it.
I should note that once the RUU was updated to GPE, I didn't bother reinstalling TWRP, so I'm also stuck on a stock recovery.
There are a couple of significant issues beyond the phone just not starting up. When I go into the bootloader, it states that it's missing OP6BDIAG.zip, and that no images were found. It then says a few more things in separate lines so quickly I can't really read them. I think they're either .exe or .zip files.
MTP is not currently working, I can't access the file structure. ADB and Fastboot are giving me errors, saying they can't find the device. I've pushed FACTORY RESET in the bootloader with no difference at all. I've gone into the recovery and wiped data, cache, everything. My NANDroid backups are all of Sense, because I have only converted this phone to GPE a week ago.
I'm not a software developer, I'm not an Android systems expert, and in all honesty when it comes down to it I'm skilled enough to read a manual and know usually what I'm saying when I type in command prompts. I need some help. I've officially spent more time trying to figure out how to fix this than converting the phone in the first place.
Some more info: For those of you who don't know, to do the conversion I've done, my phone is unlocked, has s-off, I've changed the CID to google's, and I changed the RUU to the stock android from a member of this forum's instructions. The bootloader is still HTC, and it is running the HTC GPE RUU, not a Nexus or other RUU.
Update: I got TWRP on my phone! ADB wasn't communicating with my device so I looked up how to do it all through fastboot. It's turned my phone into an MTP device and I can access everything. My NANdroid backups to Sense were deleted when my RUU updated it to a Play Edition phone, so I'm out of luck there, but I assume I can just use TWRP tools to get my phone working again? What's my next step?
DiscoKing said:
Update: I got TWRP on my phone! ADB wasn't communicating with my device so I looked up how to do it all through fastboot. It's turned my phone into an MTP device and I can access everything. My NANdroid backups to Sense were deleted when my RUU updated it to a Play Edition phone, so I'm out of luck there, but I assume I can just use TWRP tools to get my phone working again? What's my next step?
Click to expand...
Click to collapse
No official RUU is pre-rooted, and unfortunately Lollipop has been very rough on root users. It isn't like the old days when it would just blow away your root files and move on.
If you want to run GPE, get the official RUU and try it again. Just keep in mind that OTAs will break if you root it.
That worked, after a few failures. Thank you.
Please help me I have the exact same problem. How did you manage to install TWRP?

Bricked HTC One M8

Hi
Please can anyone help please?
Got a HTC One M8 on o2. I installed a custom rom (Viper One) and used it fine for over a year.
I've since changed to a S6 edge and wanted to revert my old phone back to stock rom unrooted.
In doing so I messed up!!!
I'm now stuck with a handset, everything wiped (including the operating system and backups)
I have TWRP recovery and need to re-install stock rom.
Can anyone help?
Thank you
This section is absolutely filled with the same question.
Have a GOOD read here
http://forum.xda-developers.com/showthread.php?t=3086860
Ah right sorry, thanks... Will check it out
bah77 said:
I'm now stuck with a handset, everything wiped (including the operating system and backups)
Click to expand...
Click to collapse
If I'm understanding you correctly, you wiped the OS, not realizing it would cause your phone to be without . . . an operating system?
NO, the operating was wiped by accident
bah77 said:
NO, the operating was wiped by accident
Click to expand...
Click to collapse
Well the easiest way without going through any hassle to fix your phone and make it Stock/Like Brand New is to run a RUU.
I will explain how to do this process with a PC and you should be good to go :good:
1. Download HTC drivers for your PC if you haven't already Here, install and uninstall HTC Sync Manager while KEEPING "HTC Driver Installer".
2. Download the RUU that best matches your phone Here, you can possibly find a O2 RUU on xda but I did not find one my self for you unfortunately, otherwise if your phone is a GSM variant phone you can flash the international RUU from Here (Instructions would be different in this case)
3. Get your phone into bootloader by TWRP or if your phone is off then hold down VOL DOWN and POWER BUTTON at the same time until HBOOT shows up.
4. Plug your device via USB into the computer and verify that you see "Fastboot USB" on your phone's screen.
5. Run the RUU .exe file, I recommend you "Run as Administrator".
6. Follow the on screen instructions and sit back 10-20 minutes as your phone becomes brand new, do not interupt the process or you could have a permanent phone brick.
bah77 said:
Ah right sorry, thanks... Will check it out
Click to expand...
Click to collapse
Is your problem fixed ? Do you still need a RUU for this ? Or the TWRP backup that you found in that link is good enough ?
Sorry not had time to try yet but hoping to in the next day or two
Thanks for the help guys, will let you know how i get on
bah77 said:
wanted to revert my old phone back to stock rom unrooted.
In doing so I messed up!!!
I'm now stuck with a handset, everything wiped (including the operating system and backups)
I have TWRP recovery and need to re-install stock rom.
Click to expand...
Click to collapse
Seems (from the vague description) that a few things went wrong:
1) You may have been proceeding without the proper knowledge of how to return to stock, and at least somewhat, "making it up" as you went along or "experimenting". This is not the proper way to go about things when modding (or in this case "unmodding") a phone. Stick to specific instructions and guides, as already pointed out the process to return to stock is well documented.
2) No degree of wiping or factory resets is going to restore a stock ROM, if you have a custom ROM installed (if that is what you were trying to do); which is a somewhat common misconception. Also, wiping things without understanding the result is a bad idea. The Wipe options are called "Advanced" for a reason. If you don't understand what it is (or the results of wiping it) than don't do it.
The process to return to working stock has been outlined by others. But if you want more specific help, you will need to do a getvar all and post the output (being sure to delete your IMEI and serial number, as those are personal info) so we can better determine the way forward. But in summary, you have 2 choices:
a) Relock the bootloader and run the proper RUU, of one exists for your CID version.
b) Restore the stock nandroid that corresponds to your CID and main version (firmware), then flash the correct corresponding stock recovery.
Been stuck like this for 40 minutes
bah77 said:
Been stuck like this for 40 minutes
Click to expand...
Click to collapse
What did you do ?
Do you have right RUU ? Can you give the RUU name that you are using ?
I saw you use a ROM.zip .. AFAIK your O2 RUU is an exe file.
You also need USB 2.0 and latest HTC USB Drivers installed.
Do i need to re lock the bootloader first?
Discussion has resumes here:
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-brick-t3243115
Thread closed.

Phone automatically starts into bootloader and flashing doesnt work

So as you might have heard, android 6.0 is out on htc one m8 now, and as usual i wanted to update. I got my device into a bootloop after unrooting and downloading some OTA's online, and messing around with stuff that didnt work.
But now im rly stuck, when i boot my phone up it automatically boots into bootloader. I cant flash a boot.img because i get a signature verify fail. Updating with RUU returns error 130 and factory resetting doesnt do anything at all(in fastboot and in recovery). plzzzz help
Hi,
Did you try to reflash your recovery and try to install another rom like ViperOne M8? Or if you want i can send you the stock ROM Android 6.0
Laurens54321 said:
So as you might have heard, android 6.0 is out on htc one m8 now, and as usual i wanted to update. I got my device into a bootloop after unrooting and downloading some OTA's online, and messing around with stuff that didnt work.
But now im rly stuck, when i boot my phone up it automatically boots into bootloader. I cant flash a boot.img because i get a signature verify fail. Updating with RUU returns error 130 and factory resetting doesnt do anything at all(in fastboot and in recovery). plzzzz help
Click to expand...
Click to collapse
You seem to be going about things rather haphazardly:
1) Not sure exactly what "some OTAs" refers to. But there is typically only one OTA that will properly work. That being the one that is for your CID (carrier version) and for the next software version (can't skip any).
2) Along the same lines, you can't just flash any RUU. It has to be for your CID and MID (Error 130 usually means wrong MID), and equal or greater version number than main version on the phone (no "downgrading" unless you have s-off).
3) "messing around with stuff that didnt work" doesn't tell us anything about how you got to the current condition. You need to be specific and detailed, if you want us to be able to tell what you did, and how to recovery.
4) You can't unroot and OTA, it has to be a stock (never rooted) ROM and stock recovery.
5) boot.img in itself probably won't help your situation. And signature verify fail usually means you tried to flash without the bootloader unlocked (which won't work).
Are you S-OFF? If so, this works;
1) Download 0P6BIMG.zip. You'll have to Google
"dottat @ XDA M8 RUU" to get the file as I haven't
made at least ten posts here and can't post links yet.
2) Place 0P6BIMG.zip on an SD card formatted fat32 ONLY.
3) Boot your phone, allow HBOOT to recognize 0P6BIMG.zip
and follow the prompts.
RESULT: This will land you on STOCK kitkat 1.55.605.2
pre-rooted with stock recovery.
----------------------------------------------------------------
CREDIT: dottat @ XDA

Bricked my HTC 10, What to do next?

Hey everyone, so I am pretty sure I bricked my HTC10.
To Start off my specs are the HTC 10 Unlocked version
htc_pmewl
CID: BS_US001/BS_US002
MID: 2PS650000
OS: 1.80.617.1
OpenDSP: 18.2.8996.00524_0321
(orignially Stock ROM)
I was trying to reset everything to stock settings before I returned the phone (Unrooting, Locked Bootloader, Stock Recovery, etc) and everything was going fine until after I rewrote the S-OFF flag to S-ON (I'm pretty sure it happened there, maybe when I relocked the bootloader?). Now I don't have a ROM, the CID and MID's are missing on the fastboot (download-mode) page. The Bootloader is relocked, and I have a stock recovery.
I tried going here to get the RUU's and everything to fix what I had done. However the RUU.exe gives me a error 120 Low Battery when I run it (Even though I have a fully charged battery). I tried going to a different PC to run the RUU, but the RUU never runs past the initial install.
I also tried re-unlock the bootloader so I could reinstall TWRP and flash that way. Unlocking went fine, but when I try to flash the twrp img via fastboot I get an error (9 RU_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCKED).
I'm really at my wits end here. I haven't actually done anything this stupid in all of my customizing my M8, S6, Razr or all my tablets so I honestly don't know what to do. If you guys could throw me a lifeline I'd be grateful.
Thanks
Have you tried doing a factory reset using the stock recovery?
See if you can get a system.img to flash manually. If you can get an OS boot you should be able to fix your device.
tkoreaper said:
Have you tried doing a factory reset using the stock recovery?
Click to expand...
Click to collapse
Using the adb shell command (recovery --wipe_data)? Yeah I've tried that, but I get a device not found error. adb isn't working right now, however I am still able to get fastboot commands, and the phone recognizing them at least. Otherwise, no I haven't what would I need to do?
@tw1tch175 is right. Try to find an untouched system image first and try to flash it in download mode.
Could you in addition tell a bit more about what you did to reset the device to stock instead of flashing a RUU in the first place prior to writing secureflag 3!? And further more what did you do prior to it, did you flash unsigned firmware, or one of the "no red text on boot" aboot provided here!?
Sent from my HTC 10 using XDA Labs
Are you making sure you are in download mode for fastboot commands. Also double check your driver in the device manager.
Edit: woops re-read, and he meant use the UI in the factory recovery to reset
5m4r7ph0n36uru said:
@tw1tch175 is right. Try to find an untouched system image first and try to flash it in download mode.
Could you in addition tell a bit more about what you did to reset the device to stock instead of flashing a RUU in the first place prior to writing secureflag 3!? And further more what did you do prior to it, did you flash unsigned firmware, or one of the "no red text on boot" aboot provided here!?
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Sure. I originally ran the factory wipe/reset via the ROM (Which was the stock rom). Then after that I booted up into the download mode, tried relocking the bootloader with fastboot oem lock. I also flashed the stock recovery for my model. Once I saw that I had the stock recovery on, the bootloader was locked, and everything else, I tried to do a twrp restore and relock it, but it wasn't working so I said "Screw it" and rewrote the secureflag, rebooted and...yeah everything was gone.
The only thing I did before all of this was when I got the phone unlock the bootloader, SOFF, Custom Recovery, and sideload super SU for root. The only "unofficial" radios/firmware/etc I had was the Verizon Radio on my phone.
Other than that I kept it clean. I'm looking for an image now to try that.
tw1tch175 said:
Are you making sure you are in download mode for fastboot commands. Also double check your driver in the device manager.
Edit: woops re-read, and he meant use the UI in the factory recovery to reset
Click to expand...
Click to collapse
Yes. I just figured that out while searching haha. I did go through and use the UI, but I had no luck. I am looking for an img like you said but I am not having luck so far. Is there one of the Stock guide on my original post?
Ok so for ALL HTC the only proper way to s-on is to use fastboot/download and for oem writesecureflag 3, you should NEVER EVER EVER us echo/dd /hexeditor to go s-on.
For 2016+ phones, you should use sunshine or another tool to go from unlock/relocked to lock, do NOT use anything not designed for the phone in question, or attempt to do it manually. I can only vouch for SunShine's capability to safely change the bootloader status, I can't vouch for any other method or tool. I know SunShine does it right.
See http://forum.xda-developers.com/htc-10/how-to/psa-htc-10-s-off-s-lock-unlock-t3371264 for my PSA on the subject.
If the phone won't flash with a proper RUU, well you need to find someone with a EMMC write tool to rewrite all your firmware, this is probably going to run $100-200.
bob3rt said:
Hey everyone, so I am pretty sure I bricked my HTC10.
To Start off my specs are the HTC 10 Unlocked version
htc_pmewl
CID: BS_US001/BS_US002
MID: 2PS650000
OS: 1.80.617.1
OpenDSP: 18.2.8996.00524_0321
(orignially Stock ROM)
I was trying to reset everything to stock settings before I returned the phone (Unrooting, Locked Bootloader, Stock Recovery, etc) and everything was going fine until after I rewrote the S-OFF flag to S-ON (I'm pretty sure it happened there, maybe when I relocked the bootloader?). Now I don't have a ROM, the CID and MID's are missing on the fastboot (download-mode) page. The Bootloader is relocked, and I have a stock recovery.
I tried going here to get the RUU's and everything to fix what I had done. However the RUU.exe gives me a error 120 Low Battery when I run it (Even though I have a fully charged battery). I tried going to a different PC to run the RUU, but the RUU never runs past the initial install.
I also tried re-unlock the bootloader so I could reinstall TWRP and flash that way. Unlocking went fine, but when I try to flash the twrp img via fastboot I get an error (9 RU_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCKED).
I'm really at my wits end here. I haven't actually done anything this stupid in all of my customizing my M8, S6, Razr or all my tablets so I honestly don't know what to do. If you guys could throw me a lifeline I'd be grateful.
Thanks
Click to expand...
Click to collapse
bob3rt said:
Sure. I originally ran the factory wipe/reset via the ROM (Which was the stock rom). Then after that I booted up into the download mode, tried relocking the bootloader with fastboot oem lock. I also flashed the stock recovery for my model. Once I saw that I had the stock recovery on, the bootloader was locked, and everything else, I tried to do a twrp restore and relock it, but it wasn't working so I said "Screw it" and rewrote the secureflag, rebooted and...yeah everything was gone.
The only thing I did before all of this was when I got the phone unlock the bootloader, SOFF, Custom Recovery, and sideload super SU for root. The only "unofficial" radios/firmware/etc I had was the Verizon Radio on my phone.
Other than that I kept it clean. I'm looking for an image now to try that.
Click to expand...
Click to collapse
So as I thought. You indeed flashed - at least parts - of an unofficial firmware. Prior to relocking the bootloader with SunShine, as well as setting S-ON you should've taken care that ALL its stock. A simple factory reset in the ROM settings wasn't enough.
I'd guess that the wrong radio led to a problem when booting with stock recovery of your ROM, relocked bootloader and secureflag set to S-ON.
If I saw it correctly all RUUs for your device are *.exe files. Best would be to extract the ROM.zip from this exe, using 7zip, rename it to 2PS6IMG.zip, place it on an external SDCard (formatted extFAT or FAT32) and reboot to download mode, to give it a shot.
Hope this will help.
Edit: ... nvm... @jcase ninja'd me. Wanted to post the exact same link.
Sent from my HTC 10 using XDA Labs
5m4r7ph0n36uru said:
So as I thought. You indeed flashed - at least parts - of an unofficial firmware. Prior to relocking the bootloader with SunShine, as well as setting S-ON you should've taken care that ALL its stock. A simple factory reset in the ROM settings wasn't enough.
I'd guess that the wrong radio led to a problem when booting with stock recovery of your ROM, relocked bootloader and secureflag set to S-ON.
If I saw it correctly all RUUs for your device are *.exe files. Best would be to extract the ROM.zip from this exe, using 7zip, rename it to 2PS6IMG.zip, place it on an external SDCard (formatted extFAT or FAT32) and reboot to download mode, to give it a shot.
Hope this will help.
Edit: ... nvm... @jcase ninja'd me. Wanted to post the exact same link.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Ah gotcha. That makes sense. Wouldn't have been the only thing that slipped my mind. I lost access to my Steam authenticator too. I was able to get the zip from the exe file like you said, after I put that on an SD card and boot to download mode do I just fastboot flash zip?
If there's one thing I remember when using Sunshine to go S-OFF on two different HTC 10's it was that it mentioned something about going S-ON and how something wasn't guaranteed, I forget what exactly, but if I remember correctly I understood it as you shouldn't go back to S-ON because it wasn't guaranteed to work or something like that. Anyone know what I'm talking about?
tkoreaper said:
If there's one thing I remember when using Sunshine to go S-OFF on two different HTC 10's it was that it mentioned something about going S-ON and how something wasn't guaranteed, I forget what exactly, but if I remember correctly I understood it as you shouldn't go back to S-ON because it wasn't guaranteed to work or something like that. Anyone know what I'm talking about?
Click to expand...
Click to collapse
That is in regards to wiping data, earlier versions of sunshien wiped data on all htc 10 going s-off, thats not the issue here. Issue here is he improperly set the phone lock/s-on. Gotta use sunshine to set it locked, and fastboot to set s-on.
Hey Everyone just wanted to give an update since yesterday evening.
Just wanted to give out some props to @5m4r7ph0n36uru . Following his advice of extracting the Rom.zip from RUU .exe I was able to run it in download mode and loaded up an OS on the phone. So Now I am unbricked! Yay. I had to find out how to do that using process monitor and everything, but it was a success. and I can breathe easy. Thankfully doing that was easier that doing the Database call handler stuff from today at work XD
Thankfully my lesson is learned and I'll flash correctly to full stock next time. Thank you all for your help in the matter.
bob3rt said:
Hey everyone, so I am pretty sure I bricked my HTC10.
To Start off my specs are the HTC 10 Unlocked version
htc_pmewl
CID: BS_US001/BS_US002
MID: 2PS650000
OS: 1.80.617.1
OpenDSP: 18.2.8996.00524_0321
(orignially Stock ROM)
I was trying to reset everything to stock settings before I returned the phone (Unrooting, Locked Bootloader, Stock Recovery, etc) and everything was going fine until after I rewrote the S-OFF flag to S-ON (I'm pretty sure it happened there, maybe when I relocked the bootloader?). Now I don't have a ROM, the CID and MID's are missing on the fastboot (download-mode) page. The Bootloader is relocked, and I have a stock recovery.
I tried going here to get the RUU's and everything to fix what I had done. However the RUU.exe gives me a error 120 Low Battery when I run it (Even though I have a fully charged battery). I tried going to a different PC to run the RUU, but the RUU never runs past the initial install.
I also tried re-unlock the bootloader so I could reinstall TWRP and flash that way. Unlocking went fine, but when I try to flash the twrp img via fastboot I get an error (9 RU_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCKED).
I'm really at my wits end here. I haven't actually done anything this stupid in all of my customizing my M8, S6, Razr or all my tablets so I honestly don't know what to do. If you guys could throw me a lifeline I'd be grateful.
Thanks
Click to expand...
Click to collapse
Hello,
Just to inform that if I try to run RUU.exe from PC when the phone is in bootloader menu, I get battery low error. However, if I "boot to download mode" in the bootloader menu, I can run the RUU.exe from the computer without any error.

RESOLVED! [SOS!] Phone can't boot past bootloader

My phone is having a bowl of bootloops right now lol.
I have a unlocked htc 10, i unlocked the bootloader (S-on since leedroid thread didn't say it was necessary), flashed the latest TWRP formatted data part, rebooted recovery again, swiped allow modifications, flashed the marshmallow version of the ROM and nothing but bootloops. what am i missing? thanks
first time HTC owner here coming from a 6p so show mercy
drago10029 said:
My phone is having a bowl of bootloops right now lol.
I have a unlocked htc 10, i unlocked the bootloader (S-on since leedroid thread didn't say it was necessary), flashed the latest TWRP formatted data part, rebooted recovery again, swiped allow modifications, flashed the marshmallow version of the ROM and nothing but bootloops. what am i missing? thanks
first time HTC owner here coming from a 6p so show mercy
Click to expand...
Click to collapse
Are you on MM firmware or N?
Also S-OFF is the way to go.
andybones said:
Are you on MM firmware or N?
Also S-OFF is the way to go.
Click to expand...
Click to collapse
I was on latest stock nougat before I started the process. since the I have tried flashing both leedroid marshmallow zip and the nougat magisk zip also. and what's the deal with s-off?
Everywhere i look they're all how to's about s-off lol. seems hard to find a thread on what s-off is, if it's needed to for a specific ROM or not :/ that being said leedroid it wasn't needed as quoted below. thanks!
If you wish to s-off first, please follow >> THIS GUIDE << by @jcase & return when your device is back up and running.
First boot will take approximately 15 minutes due to Art optimization
Click to expand...
Click to collapse
UPDATE: things have gotten worse.... I was attempting to relock the bootloader since RUU was failing with error 155, someone in a diff HTC thread said locked bootloader was needed for RUU. now phone flashes HTC logo then powers off. buttons pressed not going to recovery right now anyone wanna chime in? please...
@defcomg you know anything about HTC phones? I am currently stuck in the sunken place lol
drago10029 said:
I was on latest stock nougat before I started the process. since the I have tried flashing both leedroid marshmallow zip and the nougat magisk zip also. and what's the deal with s-off?
Everywhere i look they're all how to's about s-off lol. seems hard to find a thread on what s-off is, if it's needed to for a specific ROM or not :/ that being said leedroid it wasn't needed as quoted below. thanks!
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=1680928
andybones said:
https://forum.xda-developers.com/showthread.php?t=1680928
Click to expand...
Click to collapse
hmmmm according to that post the TWRP i flashed should have reverted on reboot and that hasn't been the case at all since it has survived multiple reboots... any thoughts on that?
"...Basically, all changes made to these partitions while the phone is running is not permanent, and will be reset upon a reboot..."
EDIT: also does that mean unless I have S-off none of the custom ROMs will flash? so what's the point of unlocking a bootloader is that needs to be disabled also
drago10029 said:
hmmmm according to that post the TWRP i flashed should have reverted on reboot and that hasn't been the case at all since it has survived multiple reboots... any thoughts on that?
"...Basically, all changes made to these partitions while the phone is running is not permanent, and will be reset upon a reboot..."
EDIT: also does that mean unless I have S-off none of the custom ROMs will flash? so what's the point of unlocking a bootloader is that needs to be disabled also
Click to expand...
Click to collapse
Keep in mind the date on that post is from a few years back (2012). You can't put all your eggs into one basket, so to speak. I was just giving you 1 article I found from a simple Google Search. Encryption and TWRP have changed quite a lot, especially since Nougat.
From my small amount of time, I think you may be confused about what the difference is between an unlocked bootloader and S-OFF, which I'd need to even go back and read that article, but thought it touched a little on it
The 10 has changed quite a bit too from past phones. Before you'd need to be S-OFF and unlocked bootloader. Now S-OFF unlocked and S-OFF locked are basically the same, but that can be found in threads if you'd like to find more info on that.
Most the info is there, you just need to search. If you need help finding articles, I can try and help with that. I've been surprised with the great info I've found after awhile of coming up empty.
I'm just now seeing all the new posts that came from before I posted and have been on my phone and don't have the time to catch up on it all right now.
Hope things get squared away for you soon, I'll check in when I can.
It seemed you were in a simple bootloop, but I'm not 100%. I think your issue was flashing MM ROM on N firmware. Can't do that.
Also, Verizon doesn't allow us to unlock bootloader on Htc-dev. So if we want to root, we must S-OFF.
andybones said:
Keep in mind the date on that post is from a few years back. You can't put all your eggs into one basket, so to speak. I was just giving you 1 article I found from a simple Google Search. Encryption and TWRP have changed quite a lot, especially since Nougat.
I'm just now seeing all the new posts that came from before I posted and have been on my phone and don't have the time to catch up on it all right now.
Hope things get squared away for you soon, I'll check in when I can.
Click to expand...
Click to collapse
gotcha and thanks! so for anyone else who wants to help. I have regained access to download mode and bootloader. when attempting to run latest official RUU.exe from HTC's site, i get error 155. via HTC the error means I'm using the wrong update but my phone reports SW 2.48.617.1 and I'm trying to update it to SW 2.48.617.3.
also i have relocked the bootloader and have s-off.
drago10029 said:
gotcha and thanks! so for anyone else who wants to help. I have regained access to download mode and bootloader. when attempting to run latest official RUU.exe from HTC's site, i get error 155. via HTC the error means I'm using the wrong update but my phone reports SW 2.48.617.1 and I'm trying to update it to SW 2.48.617.3.
also i have relocked the bootloader and have s-off.
Click to expand...
Click to collapse
What method have you tried for the SW?
is it an RUU or just firmware?
I suggest the sdcard method.
Make sure to have the correct htc_fastboot.exe over the standard fastboot.exe, this could be the cause of your failure.
https://www.androidfilehost.com/?fid=24545065934258327
Either remove your current fastboot.exe and rename this one to it, or keel it as htc_fastboot.exe and use the correct, htc_fastboot flash, over fastboot flash
andybones said:
What method have you tried for the SW?
is it an RUU or just firmware?
I suggest the sdcard method.
Make sure to have the correct htc_fastboot.exe over the standard fastboot.exe, this could be the cause of your failure.
https://www.androidfilehost.com/?fid=24545065934258327
Either remove your current fastboot.exe and rename this one to it, or keel it as htc_fastboot.exe and use the correct, htc_fastboot flash, over fastboot flash
Click to expand...
Click to collapse
bear in mind I'm still learning all this HTC stuff lol
is it an RUU or just firmware? It's an RUU.exe for HTC 10 unlocked edition that i got from there website
I suggest the sdcard method. you mean installing custom ROM zip from sd card? otherwise i'm not sure what you mean.
Make sure to have the correct htc_fastboot.exe over the standard fastboot.exe, this could be the cause of your failure. hmmm well I used fastboot.exe from minimal adb & fasboot to unlock bootloader and that worked fine, and should i still i just replace fastboot in platform tools folder with fastboot.exe from htc website?
also so s-off shouldn't be needed to install the ROMs? just bootloader unlock?
drago10029 said:
bear in mind I'm still learning all this HTC stuff lol
is it an RUU or just firmware? It's an RUU.exe for HTC 10 unlocked edition that i got from there website
I suggest the sdcard method. you mean installing custom ROM zip from sd card? otherwise i'm not sure what you mean.
Make sure to have the correct htc_fastboot.exe over the standard fastboot.exe, this could be the cause of your failure. hmmm well I used fastboot.exe from minimal adb & fasboot to unlock bootloader and that worked fine, and should i still i just replace fastboot in platform tools folder with fastboot.exe from htc website?
also so s-off shouldn't be needed to install the ROMs? just bootloader unlock?
Click to expand...
Click to collapse
Keep in mind this is me helping in my free time.
Use the linked htc_fastboot.. It's made for htc, it's why I mentioned it..
I've seen many ppl have RUU fail by not using this.
Also an RUU/firmware have 3 methods to install.
I suggest the sd-card method. Safest.
Search. Search. Search. ...
Option 1
Copy 2PS6IMG.zip (THIS IS FOR VERIZON, YOUR CARRIER WILL NEED TO BE RENAMED CORRECTLY) to root of a physical SD formatted to fat32. No exfat! No internal storage! Must be external SD formated to fat32!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
Option 2
EXE option. Download EXE file below (for windows) and simply double click to start. You can either be booted to OS with USB debugging enabled OR booted into download mode for this to start.
Option 3
Fastboot RUU mode . This method assumes you have a working ADB/Fastboot directory on your PC. Download RUU zip file and place in your working fastboot/adb directory. Boot your phone to download mode and connect to PC. Issue the following commands.
htc_fastboot oem rebootRUU
###while in this mode your phone will display an HTC logo on the screen
htc_fastboot flash zip 2PS6IMG.zip
##while in this mode you will see an HTC logo on the screen and a green status bar across the bottom of the screen. When command output ##completes it may say reboot required to flush etc... if that's the case issue a "htc_fastboot reboot-bootloader" command and restart option 1 again.
## assuming flash completes and no further flushing/reboots are requested from the cmd output you can now reboot IF you simply wish to reboot the system you can issue "htc_fastboot reboot" which will reboot system.
## expect a good 5 minute plus first boot!
--Taken from
Also read here. This is a great thread.
There's a lot of info out there.
Just search and do your homework.
It's easy to turn that device into a useless brick.
Especially being S-OFF... Secuirty-off..
I know it can be overwhelming, but the info is out there, and if not, just ask, as others most likely have the same question and this will help them.
And correct, with S-OFF isn't needed to flash ROMs. Only bootloader unlock.
andybones said:
Keep in mind this is me helping in my free time.
Use the linked htc_fastboot.. It's made for htc, it's why I mentioned it..
I've seen many ppl have RUU fail by not using this.
Also an RUU/firmware have 3 methods to install.
I suggest the sd-card method. Safest.
Search. Search. Search. ...
Option 1
Copy 2PS6IMG.zip (THIS IS FOR VERIZON, YOUR CARRIER WILL NEED TO BE RENAMED CORRECTLY) to root of a physical SD formatted to fat32. No exfat! No internal storage! Must be external SD formated to fat32!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
Option 2
EXE option. Download EXE file below (for windows) and simply double click to start. You can either be booted to OS with USB debugging enabled OR booted into download mode for this to start.
Option 3
Fastboot RUU mode . This method assumes you have a working ADB/Fastboot directory on your PC. Download RUU zip file and place in your working fastboot/adb directory. Boot your phone to download mode and connect to PC. Issue the following commands.
htc_fastboot oem rebootRUU
###while in this mode your phone will display an HTC logo on the screen
htc_fastboot flash zip 2PS6IMG.zip
##while in this mode you will see an HTC logo on the screen and a green status bar across the bottom of the screen. When command output ##completes it may say reboot required to flush etc... if that's the case issue a "htc_fastboot reboot-bootloader" command and restart option 1 again.
## assuming flash completes and no further flushing/reboots are requested from the cmd output you can now reboot IF you simply wish to reboot the system you can issue "htc_fastboot reboot" which will reboot system.
## expect a good 5 minute plus first boot!
--Taken from
Also read here. This is a great thread.
There's a lot of info out there.
Just search and do your homework.
It's easy to turn that device into a useless brick.
Especially being S-OFF... Secuirty-off..
I know it can be overwhelming, but the info is out there, and if not, just ask, as others most likely have the same question and this will help them.
And correct, with S-OFF isn't needed to flash ROMs. Only bootloader unlock.
Click to expand...
Click to collapse
my bad, i hope i didn't come off rude or anything. i do appreciate all your help and i understand it. I do the same here when i have the free time.
I will ask some question's on both those threads you linked. I came across one of them but no s-off and didn't wanna pay for sunshine app. also topjohnwu thread about stock and guides would be helpful if it listed which phones the code names correlate to.
in the end I see your point, keep researching and asking. and I do that very often and promise. today was different since a bunch of PC failed to install updates at work (post wannacry) lol and dealing with my bootlooping phone, my mind was scattered. iv'e bricked before but never on a phone this expensive *__*
thanks again andy!
JUST AN UPDATE: i restored via twrp after i got the bootlooping to stop. I completely forgot I had made one -__- (more scatter brains) so I'm good to go now.... kinda.
drago10029 said:
my bad, i hope i didn't come off rude or anything. i do appreciate all your help and i understand it. I do the same here when i have the free time.
I will ask some question's on both those threads you linked. I came across one of them but no s-off and didn't wanna pay for sunshine app. also topjohnwu thread about stock and guides would be helpful if it listed which phones the code names correlate to.
in the end I see your point, keep researching and asking. and I do that very often and promise. today was different since a bunch of PC failed to install updates at work (post wannacry) lol and dealing with my bootlooping phone, my mind was scattered. iv'e bricked before but never on a phone this expensive *__*
thanks again andy!
JUST AN UPDATE: i restored via twrp after i got the bootlooping to stop. I completely forgot I had made one -__- (more scatter brains) so I'm good to go now.... kinda.
Click to expand...
Click to collapse
You didn't come off rude at all, I was actually hoping you didn't take my response as being rude. S-OFF and sunshine is completely worth the $25. However, for a normal user like yourself, you don't need it.
Glad to hear that you're somewhat good to go, lol.
You can always pm me or tag me in a post if needed and I'll do my best to help.
andybones said:
You didn't come off rude at all, I was actually hoping you didn't take my response as being rude. S-OFF and sunshine is completely worth the $25. However, for a normal user like yourself, you don't need it.
Glad to hear that you're somewhat good to go, lol.
You can always pm me or tag me in a post if needed and I'll do my best to help.
Click to expand...
Click to collapse
glad no guns are being drawn here
and since no you offered lol.... how do i get my CID and MID? using the fastboot you kindly spotted me...
fastboot getvar all and fastboot oem readcid: both return nothing but fastboot not recognized..... etc. etc. I am in download mode (unlocked and s-on if that matters)
drago10029 said:
glad no guns are being drawn here
and since no you offered lol.... how do i get my CID and MID? using the fastboot you kindly spotted me...
fastboot getvar all and fastboot oem readcid: both return nothing but fastboot not recognized..... etc. etc. I am in download mode (unlocked and s-on if that matters)
Click to expand...
Click to collapse
Fastboot isn't recognized? As in it's not working?
drago10029 said:
gotcha and thanks! so for anyone else who wants to help. I have regained access to download mode and bootloader. when attempting to run latest official RUU.exe from HTC's site, i get error 155. via HTC the error means I'm using the wrong update but my phone reports SW 2.48.617.1 and I'm trying to update it to SW 2.48.617.3.
also i have relocked the bootloader and have s-off.
Click to expand...
Click to collapse
2.48.617.3? I don't think there is such a thing. Do you mean 2.41.617.3?
andybones said:
Fastboot isn't recognized? As in it's not working?
Click to expand...
Click to collapse
xunholyx said:
2.48.617.3? I don't think there is such a thing. Do you mean 2.41.617.3?
Click to expand...
Click to collapse
1st things 1st, SOS is no more. was trying to flash leedroid magisk file, thinking it was a ROM until i noticed the file size so I went back to stock via TWRP backup (i forgot I made) since RUU was giving 155 error.
2nd the HTC fastboot wasn't working for some reason.. adb devices cmd detected nothing, it worked at my job though since i have android studio/platform tools there (shrug) so used that fastboot instead.
3rd I did mean SW 2.48.617.1 that's the exact OS version # that download mode reports currently and was the last official update i took several days before going custom route.
drago10029 said:
1st things 1st, SOS is no more. was trying to flash leedroid magisk file, thinking it was a ROM until i noticed the file size so I went back to stock via TWRP backup (i forgot I made) since RUU was giving 155 error.
2nd the HTC fastboot wasn't working for some reason.. adb devices cmd detected nothing, it worked at my job though since i have android studio/platform tools there (shrug) so used that fastboot instead.
3rd I did mean SW 2.48.617.1 that's the exact OS version # that download mode reports currently and was the last official update i took several days before going custom route.
Click to expand...
Click to collapse
Okay. Cool that you got it fixed. But you did say you were trying to update from 2.48.617.1 to 2.48.617.3, so that's why I said there was no .3
xunholyx said:
Okay. Cool that you got it fixed. But you did say you were trying to update from 2.48.617.1 to 2.48.617.3, so that's why I said there was no .3
Click to expand...
Click to collapse
oooh i see lol.. too many numbers.

Categories

Resources