Related
Let me start by saying this forum has provided me with a ton of support in the past. There is so much information available here that I rarely have to start my own thread. Unfortunately, I have spent the past 18 hours looking for a solution to my current problem and have come up empty handed. I'm hoping some of you are savvy enough to help me out. I will try to provide as much information as possible to help diagnose the issue.
Device
HTC One M8
Carrier: AT&T
CID: CWS_001
Unlocked HTC Bootloader
S-On
I was previously running the stock ROM rooted (based on the above) simply to disable the AT&T bloatware. As of last week, AT&T began pushing the 4.4.4 update and I made the mistake of trying to install it not realizing my custom recovery (TWRP 2.7.1.0) would prevent it. Ever since this occurred, my phone has been doing strange things, i.e. random reboots and the "AT&T" logo in the upper left corner of the task bar would flash and disappear. It eventually got to the point where my phone was stuck in a constant boot loop and the only thing that would fix it was a factory reset from TWRP recovery. The phone would then act normal for about 24 hours and then the boot loop would start again.
I decided to try solving the issue by installing the GPE 4.4.3 ROM. I performed a complete wipe in TWRP (including system) and installed the GPE ROM via ADB/Fastboot. Everything was fine from this point and all apps/data synced after I logged into my Google account. Shortly after the phone booted, I was asked to install the GPE 4.4.4 update. It was at this point that I decided to load the stock recovery image so I could simply install the OTA update. Once again, no problems. Stock recovery flashed fine and I downloaded the 4.4.4 OTA update and rebooted the phone. The phone appeared to finish the install, but failed to boot. Now I cannot get past the HTC splash screen and I do not have a custom recovery.
The factory reset option from stock recovery does not help (still gets stuck at the splash screen) and for some reason my device is no longer recognized in Fastboot which prevents me from flashing a custom recovery. I thought it may have been a driver issue so I uninstalled and reinstalled HTC Sync Manager. I also tried manually uninstalling the drivers from the USB Root Hub, pulled the battery on my laptop, and allowed Windows 7 to auto update the drivers automatically. In each case, the drivers were successfully installed, but the phone is still not recognized in Fastboot (no devices listed). I even did a system restore on my laptop to a few days before the issue and the phone still isn't recognized by HTC Sync Manager or Fastboot.
The stock recovery bootloader displays the following information:
*** TAMPERED ***
*** UNLOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.18.0.0000
RADIO-INVALID_VER_INFO
OpenDSP-INVALID_VER_INFO
OS- (2.12..1700.1)
eMMC-boot 2048MB
Based on all of this, do I have any options or is my phone bricked?
1. Is there anything I can do so my device is recognized by ADB/Fastboot so I can flash a custom recovery?
2. Can I install a ROM from the SD card with the stock recovery? I currently have the GPE 4.4.3 ROM on my SD card, but the zip is not recognized by the stock recovery. Can I rename it to something else so it can be recognized and installed?
3. Because the phone is not recognized by Windows, I cannot use the RUU method. Are there any other ways to return my phone to stock without RUU?
Any help is greatly appreciated.
Swazi Samurai said:
Let me start by saying this forum has provided me with a ton of support in the past. There is so much information available here that I rarely have to start my own thread. Unfortunately, I have spent the past 18 hours looking for a solution to my current problem and have come up empty handed. I'm hoping some of you are savvy enough to help me out. I will try to provide as much information as possible to help diagnose the issue.
Device
HTC One M8
Carrier: AT&T
CID: CWS_001
Unlocked HTC Bootloader
S-On
I was previously running the stock ROM rooted (based on the above) simply to disable the AT&T bloatware. As of last week, AT&T began pushing the 4.4.4 update and I made the mistake of trying to install it not realizing my custom recovery (TWRP 2.7.1.0) would prevent it. Ever since this occurred, my phone has been doing strange things, i.e. random reboots and the "AT&T" logo in the upper left corner of the task bar would flash and disappear. It eventually got to the point where my phone was stuck in a constant boot loop and the only thing that would fix it was a factory reset from TWRP recovery. The phone would then act normal for about 24 hours and then the boot loop would start again.
I decided to try solving the issue by installing the GPE 4.4.3 ROM. I performed a complete wipe in TWRP (including system) and installed the GPE ROM via ADB/Fastboot. Everything was fine from this point and all apps/data synced after I logged into my Google account. Shortly after the phone booted, I was asked to install the GPE 4.4.4 update. It was at this point that I decided to load the stock recovery image so I could simply install the OTA update. Once again, no problems. Stock recovery flashed fine and I downloaded the 4.4.4 OTA update and rebooted the phone. The phone appeared to finish the install, but failed to boot. Now I cannot get past the HTC splash screen and I do not have a custom recovery.
The factory reset option from stock recovery does not help (still gets stuck at the splash screen) and for some reason my device is no longer recognized in Fastboot which prevents me from flashing a custom recovery. I thought it may have been a driver issue so I uninstalled and reinstalled HTC Sync Manager. I also tried manually uninstalling the drivers from the USB Root Hub, pulled the battery on my laptop, and allowed Windows 7 to auto update the drivers automatically. In each case, the drivers were successfully installed, but the phone is still not recognized in Fastboot (no devices listed). I even did a system restore on my laptop to a few days before the issue and the phone still isn't recognized by HTC Sync Manager or Fastboot.
The stock recovery bootloader displays the following information:
*** TAMPERED ***
*** UNLOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.18.0.0000
RADIO-INVALID_VER_INFO
OpenDSP-INVALID_VER_INFO
OS- (2.12..1700.1)
eMMC-boot 2048MB
Based on all of this, do I have any options or is my phone bricked?
1. Is there anything I can do so my device is recognized by ADB/Fastboot so I can flash a custom recovery?
2. Can I install a ROM from the SD card with the stock recovery? I currently have the GPE 4.4.3 ROM on my SD card, but the zip is not recognized by the stock recovery. Can I rename it to something else so it can be recognized and installed?
3. Because the phone is not recognized by Windows, I cannot use the RUU method. Are there any other ways to return my phone to stock without RUU?
Any help is greatly appreciated.
Click to expand...
Click to collapse
There is 2 methods to do an RUU. one is by putting the RUU on your sdcard and booting into the bootloader and waiting a few minutes then accepting the prompt to do it and 2 is the fastboot method. Since you have an SD card you could attempt the first one I listed. Make sure you don't change the name of the RUU and make sure you get the proper one for your phone.
S1L3nTShaDoWz said:
There is 2 methods to do an RUU. one is by putting the RUU on your sdcard and booting into the bootloader and waiting a few minutes then accepting the prompt to do it and 2 is the fastboot method. Since you have an SD card you could attempt the first one I listed. Make sure you don't change the name of the RUU and make sure you get the proper one for your phone.
Click to expand...
Click to collapse
Don't you have to be S-OFF or have a locked bootloader to run a RUU? I am unable to achieve either of those since my phone is not recognized by by ADB/Fastboot.
Also, because my most recent functioning ROM was GPE 4.4.3, would I still be able to run the stock AT&T RUU? I thought the partitions were different? I have the GPE RUU as well, but I don't think I can run that either without changing my CID and locking my bootloader.
Swazi Samurai said:
Don't you have to be S-OFF or have a locked bootloader to run a RUU? I am unable to achieve either of those since my phone is not recognized by by ADB/Fastboot.
Also, because my most recent functioning ROM was GPE 4.4.3, would I still be able to run the stock AT&T RUU? I thought the partitions were different? I have the GPE RUU as well, but I don't think I can run that either without changing my CID and locking my bootloader.
Click to expand...
Click to collapse
S-OFF not so sure about, locked bootloader, no you can have it unlocked. But you can try it anyways, the SD card method.
Yes you would be able to run it, I'm quite sure all you did was flash a GPE ROM. I believe all flashing the ROM does is give you a GPE ROM where as the GPE RUU would change all that and give you GPE phones firmware too.
On the off hand you did do a GPE RUU then I'm not sure.
S1L3nTShaDoWz said:
S-OFF not so sure about, locked bootloader, no you can have it unlocked. But you can try it anyways, the SD card method.
Yes you would be able to run it, I'm quite sure all you did was flash a GPE ROM. I believe all flashing the ROM does is give you a GPE ROM where as the GPE RUU would change all that and give you GPE phones firmware too.
On the off hand you did do a GPE RUU then I'm not sure.
Click to expand...
Click to collapse
I have heard it has to be one or the other. If S-OFF, the bootloader can be unlocked. If S-ON, the bootloader has to be locked.
I did not run the GPE RUU originally; I installed the ROM through custom recovery. I'm assuming that is a good thing based on your feedback.
Regardless, I haven't been able to try the SD method because the zip file I extracted from the RUU exe will not transfer to my SD card. I also tried downloading another user's bootable version and it won't transfer either. I have copied many other files to and from my SD card (even larger file sizes) without any issues. I have no clue what is going on now...
Swazi Samurai said:
I have heard it has to be one or the other. If S-OFF, the bootloader can be unlocked. If S-ON, the bootloader has to be locked.
I did not run the GPE RUU originally; I installed the ROM through custom recovery. I'm assuming that is a good thing based on your feedback.
Regardless, I haven't been able to try the SD method because the zip file I extracted from the RUU exe will not transfer to my SD card. I also tried downloading another user's bootable version and it won't transfer either. I have copied many other files to and from my SD card (even larger file sizes) without any issues. I have no clue what is going on now...
Click to expand...
Click to collapse
I formatted my SD card and was finally able to transfer the RUU. The bootloader begins to run the 0P6BIMG file, but it fails right after it starts parsing. I tried running it several times and the results were the same.
I really wish I could get ADB to recognize my phone so I can flash a custom recovery... When I plug my phone into a USB port, my computer makes a noise, the phone says "USB" next to Fastboot, and HTC Sync Manager begins to load. When HTC Sync Manager comes up, it says "HTC Sync Manager couldn't connect to your phone." Windows Device Manager also does not have anything listed for an Android device.
I've noticed when the phone is not powered on and simply charging from the USB port, an "HTC MTP Device" driver tries to install, but fails. Could this be the problem? I've tried plugging the phone into 3 different computers and they all get the MTP failure.
If you are coming from a GSM variant things get a little bit more complicated to install a GPE RUU, as the GPE HBoot is different from the GSM one and partition sizes are as well.
You have to be S-Off to install the proper firmware and prior to doing this, change the CID as well as the MID to a GPE one.
There is a full guide on this forum to convert your M8 from GSM to GPE, bit as I'm on the train at the moment I can't provide you the link right away.
Sent from my HTC One_M8 using XDA Free mobile app
HTCNerdYoda said:
If you are coming from a GSM variant things get a little bit more complicated to install a GPE RUU, as the GPE HBoot is different from the GSM one and partition sizes are as well.
You have to be S-Off to install the proper firmware and prior to doing this, change the CID as well as the MID to a GPE one.
There is a full guide on this forum to convert your M8 from GSM to GPE, bit as I'm on the train at the moment I can't provide you the link right away.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm not specifically trying to install the GPE RUU at the moment. I had the stock GSM recovery installed based on my original CID and I'm trying to load the associated RUU.
I originally loaded GPE 4.4.3 with TWRP and downloaded the 4.4.4 update OTA from Google. Before restarting my phone and installing the update, I flashed the stock GSM recovery for CID CWS_001. This may have been what caused the issue initially when the phone tried to apply the update if it was looking for a GPE recovery.
I know I cannot install the GPE RUU because I'm S-ON and ADB does not recognize my device so I cannot change the MID or CID. At this point, I'm really just trying to get back to stock so I can start fresh.
Is it possible that when the 4.4.4 update tried to run, it associated my recovery with GPE and now that's why it will not install the stock RUU due to a mismatch? I'm really just guessing at this point.
Look here at post #28 and #30. http://forum.xda-developers.com/showthread.php?t=2717928&page=3 . Download that .zip template
I think you can put the TWRP recovery.img (it has to be renamed to recovery.img) inside the zip as directed, put it on the SD card and let the bootloader automatically detaect and flash it. Once its completed you would have to power down and remove it from the SD card otherwise it would try to update again next time you go into the bootloader. That should load a recovery from which you can flash a ROM.
3484jacks said:
Look here at post #28 and #30. http://forum.xda-developers.com/showthread.php?t=2717928&page=3 . Download that .zip template
I think you can put the TWRP recovery.img (it has to be renamed to recovery.img) inside the zip as directed, put it on the SD card and let the bootloader automatically detaect and flash it. Once its completed you would have to power down and remove it from the SD card otherwise it would try to update again next time you go into the bootloader. That should load a recovery from which you can flash a ROM.
Click to expand...
Click to collapse
I'll give that a try and report back. Thanks for the input.
3484jacks said:
Look here at post #28 and #30. http://forum.xda-developers.com/showthread.php?t=2717928&page=3 . Download that .zip template
I think you can put the TWRP recovery.img (it has to be renamed to recovery.img) inside the zip as directed, put it on the SD card and let the bootloader automatically detaect and flash it. Once its completed you would have to power down and remove it from the SD card otherwise it would try to update again next time you go into the bootloader. That should load a recovery from which you can flash a ROM.
Click to expand...
Click to collapse
You are the freakin man!!! I edited the template from the post you suggested, added my MID/CID, and packaged it with the TWRP image. Booted right from the SD and I now have custom recovery! I wish I could buy you a beer!
No problem mate. Glad I could help. :thumbup::thumbup::beer:
Sent from my HTC One_M8 using XDA Free mobile app
Hello Everyone,
I am having an issue with my M8.
I decided to try out SkyDragon, give it a shot.
I downloaded the ROM, put it on my SDcard. Flashed Philz 6.25 recovery, did NOT make a nandroid backup (I know i'm an idiot),then proceeded to flash the rom via Philz.
I flashed the Rom, and followed all the instructions, I then rebooted the phone. Still stuck at the bootscreen. I read the Q&A and tried to flash the rom multiples times. Still stuck on the boot screen. I have an unlocked bootloader with S-ON.
I just got this phone a few months ago and I am unable to take it out of this state. Could use some help. Thank you.
Is your firmware up to date? Not sure about Skydragon specifically, but long boot times (along with broken WiFi) is often a symptom of outdated firmware.
Let the phone alone for 10 minutes or so, and see if it eventually boots, and isn't actually "stuck" (but rather just takes a REALLY long time).
To flash a different ROM, adb push it to internal storage, or put in on your SD with a USB card reader connected to your computer. Then boot into recovery and flash.
redpoint73 said:
Is your firmware up to date? Not sure about Skydragon specifically, but long boot times (along with broken WiFi) is often a symptom of outdated firmware.
Let the phone alone for 10 minutes or so, and see if it eventually boots, and isn't actually "stuck" (but rather just takes a REALLY long time).
To flash a different ROM, adb push it to internal storage, or put in on your SD with a USB card reader connected to your computer. Then boot into recovery and flash.
Click to expand...
Click to collapse
Hello,
I've actually tried flashing another ROM "Android HD Revolution" I believe. The phone shows the HTC Screen along with some red text at the bottoms saying "this build is for developer purposes only....". The phone then stays on the HTC screen for ~3mins then reboots and continues to boot loop.
You just need to flash the new firmware that is found in the sky dragon OP.
Easiest way is to use fastboot. Google fastboot firmware m8. Lots of guides out there. It's only a few commands.
Edit: Should have asked if you are s-off. That will make a difference in your ability to flash new firmware.
Sent from my HTC One_M8 using XDA Free mobile app
OLEO34 said:
You just need to flash the new firmware that is found in the sky dragon OP.
Easiest way is to use fastboot. Google fastboot firmware m8. Lots of guides out there. It's only a few commands.
Edit: Should have asked if you are s-off. That will make a difference in your ability to flash new firmware.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Hello Thanks for the reply.
However, I am currently S-ON, I have searched ways to achieve S-OFF but they all require installing a ROM. However, I cannot flash any rom, I will just get the bootloop. If you could advise on a method that would work for my situation, I would be very grateful.
Default-G8way said:
... However, I cannot flash any rom, I will just get the bootloop. If you could advise on a method that would work for my situation, I would be very grateful.
Click to expand...
Click to collapse
Start with fastboot getvar all command in fastboot/bootloader, put the result here (delete serialno and imei no.) .. then we'll see whether is there any stock ROM available for your device.
Default-G8way said:
Hello Everyone,
I am having an issue with my M8.
I decided to try out SkyDragon, give it a shot.
I downloaded the ROM, put it on my SDcard. Flashed Philz 6.25 recovery, did NOT make a nandroid backup (I know i'm an idiot),then proceeded to flash the rom via Philz.
I flashed the Rom, and followed all the instructions, I then rebooted the phone. Still stuck at the bootscreen. I read the Q&A and tried to flash the rom multiples times. Still stuck on the boot screen. I have an unlocked bootloader with S-ON.
I just got this phone a few months ago and I am unable to take it out of this state. Could use some help. Thank you.
Click to expand...
Click to collapse
You needed to make sure you have the latest GPE software, s-off and supper cid... Also you need to know and have ADB/FASTBOOT installed on your PC.. All which can be found throughout all of the various threads.... Right now you soft bricked your device and needed to return to stock... And stay the process over.
lilbigdude1 said:
You needed to make sure you have the latest GPE software, s-off and supper cid... Also you need to know and have ADB/FASTBOOT installed on your PC.. All which can be found throughout all of the various threads.... Right now you soft bricked your device and needed to return to stock... And stay the process over.
Click to expand...
Click to collapse
You don't "need" the latest gpe software. The rom runs fine on the latest sense firmware.
Mr Hofs said:
You don't "need" the latest gpe software. The rom runs fine on the latest sense firmware.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=53838669
So ? Just like i said.....no need for gpe
Issue Resolved!
Hello Everyone.
The issue is resolved. Through many flashes, wipes and commands. Its done. I was able to flash the rom, let the rom sit for ~20mins, and it finally booted up into Lollipop. I now have no wifi. However, I should be able to follow the FAQ to get S-OFF and fix my wifi!. Thanks team. I really appreciate it.
Hi,
I recently managed to root my HTC One M8s with TWRP recovery and everything works perfectly, except that I can't install the new OTA (1.16.401.1).
After searching I have flashed my recovery back to the stock for my version (which is 1.11.401.1) and tried applying the OTA again, but it still fails.
I downloaded the recovery from this website: ruu.lalleman.net/HTC_M8S%28QL_UL%29/Recovery/HTC%20Recovery/ (I can't post URLs yet).
Below is the error I receive when trying to update on stock recovery, TWRP recovery also gave the same error when I tried updating there.
(Code -1)
E:Find no match PARTITION: for package path @/cache/recover/block.map
Finding update package...
Opening update package...
Verifying update package...
Installing update...
L50QCT.01.105.019
Verifying current sytem...
Package expects build fingerprint of htc/m8qlul_htc_europe/htc_m8qlul:5.0.2/LRX22G/531284.2:user/release-keys or htc/m8qlul_htc_europe/htc_m8qlul:5.0.2/LRX22G/555949.10:user/release-keys;
This device has htc/m8qlul_htc_europe/htc_m8qlul:5.0.2/LRX22G/53128
E:Error in @/cache/recovery/block.map
(Status 7)
From what I can see my build fingerprint is incorrect, but I have no idea how to fix it...
Seems to me it's likely that you've altered some system files while rooted and the Ota doesn't like it.
Now, I don't own an M8s...i have an M8, but I'd say the easiest route would be to flash your stock ruu again. After that the OTA should work.
It's that or figure out what system changes have been made and correct it. Xposed can mess you up, Uninstalled system apps can stop the Ota... MODS that changed system files... Etc. The Ota us looking for a stock system, then it updates it.
Good luck!
Thanks for the answer, I will see if I can try this solution tomorrow. I just have 2 questions:
What does the RUU do exactly? Should I see it as a complete stock reset of my phone?
And can I simply flash it using fastboot or is there a special method for a RUU?
My previous phone had an automated root and I always updated with OTA afterwards so I never flashed before now.
Im on the same boat. Tried to sim unlock by rooting and playing with CID but didnt work, now ive a rooted m8s and no ota. Tried to ruu but kept getting an error something like not enough space although i had 10gb free, cleared cache rebooted. Cant even factory reset. If anyone know how to unroot it and bring it back to stock that would be fantastic. Kind of want to delete the "flag" too make it "LOCKED" and "OFFICIAL" incase for warranty. Any ideas?
You guys have flashed 1.16 before, haven't you...?
See here: http://forum.xda-developers.com/htc-one-m8/help/help-thread-htc-one-m8s-to-stock-howto-t3190238
Err, oops, posted too soon. You said you have flashed to 1.11. What is the full filename of the RUU you flashed?
voidzero said:
You guys have flashed 1.16 before, haven't you...?
See here: http://forum.xda-developers.com/htc-one-m8/help/help-thread-htc-one-m8s-to-stock-howto-t3190238
Err, oops, posted too soon. You said you have flashed to 1.11. What is the full filename of the RUU you flashed?
Click to expand...
Click to collapse
When I got my phone I updated with OTA to version 1.11, after that I flashed TWRP recovery and rooted my phone. Now that OTA 1.16 is out I tried to update but couldn't, so I tried to flash back to stock recovery but it still wouldn't work because of the error above. Now it would seem that I am doing this the wrong way, and you cannot use OTA on a rooted/unlocked/custom recovery M8s.
Manual OTA flash worked on my previous phone with root which was an ASUS Padfone Infinity A80 as ASUS would release them on their own website for you.
Apparently HTC does not do this, or I am not looking in the right place.
I have never flashed a RUU before, and I don't know how to lock my bootloader again. From what I understand, every time there is a new OTA I will have to lock my bootloader, flash original recovery, flash RUU and then update. That sounds like a lot of trouble every time a new OTA comes out.
Is there no way to manually flash the new OTA without losing root, custom recovery and locking the bootloader? Will I have to follow these steps every time? Also I use the built in back-up to Google as well as HTC back-up but I don't know if all my data is in those back-ups or if I will lose something.
Codyksp said:
(...) so I tried to flash back to stock recovery but it still wouldn't work because of the error above. Now it would seem that I am doing this the wrong way, and you cannot use OTA on a rooted/unlocked/custom recovery M8s.
(..)
I have never flashed a RUU before, and I don't know how to lock my bootloader again. From what I understand, every time there is a new OTA I will have to lock my bootloader, flash custom recovery, flash RUU and then update. That sounds like a lot of trouble every time a new OTA comes out.
(...)
Is there no way to manually flash the new OTA without losing root, custom recovery and locking the bootloader? Will I have to follow these steps every time? Also I use the built in back-up to Google as well as HTC back-up but I don't know if all my data is in those back-ups or if I will lose something.
Click to expand...
Click to collapse
If you restore a RUU, and afterwards don't flash your recovery and boot partitions, You will see "Software status: official" in fastboot.
Now here's the trick: if you just boot a custom recovery with "fastboot boot my_recovery.img" (TWRP for example) then it will boot TWRP, but you can make the modifications to your system partition without losing "Software status: official" in fastboot.
So: If you just boot your recovery with 'fastboot boot' and don't flash anything, you can make all the modifications you want and still be able to install OTAs later, I think. I've rooted my phone, even installed XPosed, done all kinds of funky things to it but Fastboot still shows me that I'm on official software.
How does that sound?
So since there is no decent guide at all about flashing RUU for a HTC One M8s (the s makes a difference!). I have assumed that I need to have the bootloader locked first, as I unlocked it. According to all the M8 guides I have to gain S-OFF before I can lock the bootloader again. So I followed a guide to wipe with TWRP and flash a ROM called InsertCoin so that I can S-OFF my phone.
Now after going through the ROM's setup my phone is stuck in a bootloop, constantly trying to boot up. There is NO way at all for me to get it to stop, it just keeps booting the entire time. Not a single combination of buttons is working. Good thing the battery is non removable. How am I supposed to fix this? I've tried every volume up/down/power combination possible. The phone just boots to the HTC - Power by Android screen, shuts off after about 5 seconds and then repeats the same thing over and over. I can't turn it off and I can't get to the bootloader either.
What I need is a guide that tells me all the steps required to get an HTC One M8s (NOT M8!) back to 100% stock. This means, stock ROM, stock recovery, locked bootloader and S-ON. I am getting extremely frustrated by the lack of information and the amount of redicilous things I need to do just so I can root my phone and have OTA as well.
All I want is root on my phone for 1 app that I use with my car radio and I want to be able to update to the newest OTA afterwards, is that really so much to ask?
I am fine with installing a custom ROM with root and easy updates too, as long as the damn phone will boot after installing it and it's actually made for the M8s.
Deleted......
Well I finally managed to get the damn thing to the bootloader, and I've used "fastboot oem lock" to relock my bootloader. It now shows ***Software status: Modified ***, *** RELOCKED *** and ***Security Warning ***.
I will now have to go to my parents where my laptop is to be able to copy the RUU to my SD card, from what I understand it has to be named 0PKVIMG.zip and then it should automatically install.
Now the phone says it can't find the image or the image is incorrect.... It searches for, 0PKVDIAG.zip, 0PKVDIAG.nbh, 0PKVIMG.zip or 0PKVIMG.img. and it seems to find 0PKVIMG.zip and loads it but it cannot find the .img file and does absolutely nothing. Am I supposed to have both?
So it turns out that the RUU zip from http://ruu.lalleman.net/HTC_M8S%28QL_UL%29/RUU/ is actually not correct and I had to use rom.zip which was inside the folder. The phone is now running the "update" as it calls it. Fingers crossed...
Yes, possible you need to use rom.zip inside the zip, depending on the version, but I think this applies to 1.16 which I advice against using for reasons previously specified.
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
By the way, I did write an RUU restoration thread specifically for this subject. Did you not find it?
Apparently I also needed to use the rom.zip for the 1.11 version, in the meantime I have also updated with OTA to 1.16. Afterwards I also unlocked my bootloader, restored my settings and installed SuperSU by booting TWRP. Let's hope the next OTA still works...
I did read your thread but I got stuck at first on relocking the bootloader, as I couldn't find the exact instructions for a while. Afterwards I got stuck on flashing the RUU because I didn't know that I needed to use the rom.zip file to get it to work.
After all that I got quite frustrated and I just wished there was 1 thread with instructions for everything (unlocking, relocking, flashing, compatible ROMs, booting to keep OTA, etc.) which is why I was angry at the time and couldn't properly read everything or find solutions. In the end it all worked out so far though.
I would ask you to create a compilation thread though if you wanted to improve the available information. Either way, thanks for the information that you've already provided.
Codyksp said:
Apparently I also needed to use the rom.zip for the 1.11 version, in the meantime I have also updated with OTA to 1.16. Afterwards I also unlocked my bootloader, restored my settings and installed SuperSU by booting TWRP. Let's hope the next OTA still works...
I did read your thread but I got stuck at first on relocking the bootloader, as I couldn't find the exact instructions for a while. Afterwards I got stuck on flashing the RUU because I didn't know that I needed to use the rom.zip file to get it to work.
After all that I got quite frustrated and I just wished there was 1 thread with instructions for everything (unlocking, relocking, flashing, compatible ROMs, booting to keep OTA, etc.) which is why I was angry at the time and couldn't properly read everything or find solutions. In the end it all worked out so far though.
I would ask you to create a compilation thread though if you wanted to improve the available information. Either way, thanks for the information that you've already provided.
Click to expand...
Click to collapse
The next ota won't work because you rooted it. Root changes binaries which lead to a fail on ota.
You need a non rooted (read : never rooted before) stock rom.
Mr Hofs said:
The next ota won't work because you rooted it. Root changes binaries which lead to a fail on ota.
You need a non rooted (read : never rooted before) stock rom.
Click to expand...
Click to collapse
So in that case I just unroot it before updating then?
Codyksp said:
So in that case I just unroot it before updating then?
Click to expand...
Click to collapse
Read my post again...... "a never rooted rom" so that means you need a stock rom before its ever been rooted. NOT an unrooted one because it leaves traces which will cause the ota to fail !
People should learn to create a nandroid backup before flashing ANY mods/superuser.zip/roms etc......etc
Well developers shouldn't make this such a hassle... My previous phone was an ASUS Padfone Infinity (A80) and it didn't receive any OTAs after being rooted but ASUS simple lets you download the firmware updates on their website and then you can manually update it without any problems. If HTC provides a bootloader unlock, why can't they allow OTA or at least provide manual firmware updates?
I wouldn't mind using a custom ROM either but I have no idea which ROMs work for the HTC One M8s. Would any M8 ROM be compatible? The phones aren't identical, the "s" is there for a reason...
Codyksp said:
Well developers shouldn't make this such a hassle... My previous phone was an ASUS Padfone Infinity (A80) and it didn't receive any OTAs after being rooted but ASUS simple lets you download the firmware updates on their website and then you can manually update it without any problems. If HTC provides a bootloader unlock, why can't they allow OTA or at least provide manual firmware updates?
I wouldn't mind using a custom ROM either but I have no idea which ROMs work for the HTC One M8s. Would any M8 ROM be compatible? The phones aren't identical, the "s" is there for a reason...
Click to expand...
Click to collapse
I would say that M8 roms wouldn't be compatible, and could even mess up your device badly. Sorry!
Codyksp said:
Well developers shouldn't make this such a hassle... My previous phone was an ASUS Padfone Infinity (A80) and it didn't receive any OTAs after being rooted but ASUS simple lets you download the firmware updates on their website and then you can manually update it without any problems. If HTC provides a bootloader unlock, why can't they allow OTA or at least provide manual firmware updates?
I wouldn't mind using a custom ROM either but I have no idea which ROMs work for the HTC One M8s. Would any M8 ROM be compatible? The phones aren't identical, the "s" is there for a reason...
Click to expand...
Click to collapse
Your point of view is a bit off if you ask me. Developers (in this case HTC) do not have to support custom modding of your phone. They support the device in the state you buy it !
If you want to mod it that's YOUR call not theirs. Do some homework before modding it. Getting a phone back to stock for future updates is relatively easy but many people don't read first how to as they think it's not important.
HTC has no obligation at all towards you regarding custom software !
And indeed M8 roms do NOT work on your M8s !
Hey so here's my situation:
Installed the CM Nightly on my AT&T One M9, didn't like it, so I tried to revert to stock. I didn't want to pay $25 to S-OFF so I just tried installing various RUUs, but none would work. I read somewhere that I needed to relock my bootloader in order for the RUUs to work, so I did that, and now my phone just boots to Recovery Mode. I've tried installing AT&T RUU 2.6.502.16 (which didn't work because my phone is on a more recent firmware) and reinstalling 2.11.502.18/flashing its 0PJAIMG.zip (which didn't work because it's apparently broken). I've even tried installing T-Mobile's 2.11.531.19 RUU, which of course didn't work because my CID doesn't match and I can't change it because I'm S-ON.
I realize I went about this very badly almost from the start--no stock backup in TWRP, etc. This is my first Android phone so I've been learning this as I go and I was a bit sloppy.
I'm pretty sure I'm screwed, at least until a new update comes out or the current AT&T RUU is fixed, but I'm wondering if there's something else I can try. Any ideas? Thanks.
StageProps said:
Hey so here's my situation:
Installed the CM Nightly on my AT&T One M9, didn't like it, so I tried to revert to stock. I didn't want to pay $25 to S-OFF so I just tried installing various RUUs, but none would work. I read somewhere that I needed to relock my bootloader in order for the RUUs to work, so I did that, and now my phone just boots to Recovery Mode. I've tried installing AT&T RUU 2.6.502.16 (which didn't work because my phone is on a more recent firmware) and reinstalling 2.11.502.18/flashing its 0PJAIMG.zip (which didn't work because it's apparently broken). I've even tried installing T-Mobile's 2.11.531.19 RUU, which of course didn't work because my CID doesn't match and I can't change it because I'm S-ON.
I realize I went about this very badly almost from the start--no stock backup in TWRP, etc. This is my first Android phone so I've been learning this as I go and I was a bit sloppy.
I'm pretty sure I'm screwed, at least until a new update comes out or the current AT&T RUU is fixed, but I'm wondering if there's something else I can try. Any ideas? Thanks.
Click to expand...
Click to collapse
I downloaded and flashed the 2.11.502.18 ruu from the HTC website with no problem. Ate you getting an error?
Edit: in my experience, if an ruu.exe starts to run and then never does (like you get the spinning wheel for a minute and then nothing) it's either a bad download or antivirus is blocking the file. But just to repeat...the exe on the HTC website works fine. I used it about three weeks ago.
Hm. Out of the myriad RUU.exes I've tried the most recent AT&T one was the only one I couldn't get to start, and when I tried installing it via .zip it would just restart the phone and nothing else. That in combination with other posts I've seen on this forum saying it's borked (although I might have misread the numbers/misinterpreted the jargon) just lead me to think it was broken. I'll redownload and try again. Thanks!
Edit: Well, it worked! I don't know what I was doing wrong. Thanks a lot!
Alright, I will start at the beginning. I plugged my phone into my PC. HTC Sync manager popped up and told me there was an update for my device. So I was excited knowing it was the Marshmallow update. Everything was going smooth until my cable disconnected while it was installing. It failed and my phone was doing nothing. So like an idiot, I rebooted it.. Now my phone will not go past the HTC logo on boot. I tried wiping the cache partition from Android Recovery but no luck. I'm not really sure what to do at this point. My phone was not rooted, and it is *Locked*. I just want my phone back.. Any help would be so much appreciated, because I'm pretty unsure of what to do.
By the way I am not worried about saving what is on the phone. It's the HTC One M8 (Verizon).
Hi,
I'm a beginner here myself but based on what I read lately it might be possible to go into fastboot mode and flash a Lollipop RUU file.
You'll need a couple of tools on your PC (adb and fastboot) and a step by step guide, both easy to find with a quick search. The harder part is to locate the appropriate file to flash, at least I have trouble with that piece...
Good luck !
Gnondpom said:
it might be possible to go into fastboot mode and flash a Lollipop RUU file.
Click to expand...
Click to collapse
Depends on how far it got in the update. If enough of the MM update installed, LP may constitute a "downgrade", which is not allowed unless you have s-off. In that case, OP may need to use the Marshmallow RUU. But I agree, that RUU is the best bet. RUU will wipe the phone, but I think we're past the point of trying to recovery data at this point, anyway.
TO the OP, what does it say for OS number on the bootloader screen?
Presumably, the phone is s-on, as it sounds like it was never modified?
The Verizon RUUs are here: http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
Another option to flashing the RUU using fastboot, is to put the RUU zip on an SD card (if you have one) and flash. Instructions are in the link (Option 2). This is probably easiest of the options (again, assuming you have an SD card), especially if you don't have fastboot setup, and aren't familiar with it).
redpoint73 said:
Depends on how far it got in the update. If enough of the MM update installed, LP may constitute a "downgrade", which is not allowed unless you have s-off. In that case, OP may need to use the Marshmallow RUU. But I agree, that RUU is the best bet. RUU will wipe the phone, but I think we're past the point of trying to recovery data at this point, anyway.
TO the OP, what does it say for OS number on the bootloader screen?
Presumably, the phone is s-on, as it sounds like it was never modified?
The Verizon RUUs are here: http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
Another option to flashing the RUU using fastboot, is to put the RUU zip on an SD card (if you have one) and flash. Instructions are in the link (Option 2). This is probably easiest of the options (again, assuming you have an SD card), especially if you don't have fastboot setup, and aren't familiar with it).
Click to expand...
Click to collapse
OS # is (6.21.605.3) The update was just about finished before it disconnected. So I believe you are correct. I don't mind data loss, would rather just get the device functional again.
It is S-ON, it was never modified in any way. I will check out the links and see what I can do. Thank you for all the info!:good: