Alright i did a major mess up on my phone , Alright so i was rooted and was on CM13 well i decided to go back to stock rom so i downloaded the lastest Firmware and use odin to flash it and while it was flashing it failed . So i pulled the battery and restarted the phone and now i am hit with the ( Your device didn't update succesfully. Use the Verizon Software repair assistant to repair your deivce ) So i did that and it fails at 84% So i tryed reflashing again via odin and i keep getting failed well when i tryed flashing CF-Auto root to just see if it did anything it failed but when i booted the phone up it went stright to the samsung logo and boot looped so i was ok so i went into recovery and tryed to wipe /factory reset but keep getting a error .
So my thing is idk what to do i have tryed flashing via odin and it keeps failing i get this
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> __XmitData_Write
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
and that is the lastest firmware from sam mobile
if anyone can help me i really appericate it
pfcland said:
Alright i did a major mess up on my phone , Alright so i was rooted and was on CM13 well i decided to go back to stock rom so i downloaded the lastest Firmware and use odin to flash it and while it was flashing it failed . So i pulled the battery and restarted the phone and now i am hit with the ( Your device didn't update succesfully. Use the Verizon Software repair assistant to repair your deivce ) So i did that and it fails at 84% So i tryed reflashing again via odin and i keep getting failed well when i tryed flashing CF-Auto root to just see if it did anything it failed but when i booted the phone up it went stright to the samsung logo and boot looped so i was ok so i went into recovery and tryed to wipe /factory reset but keep getting a error .
So my thing is idk what to do i have tryed flashing via odin and it keeps failing i get this
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> __XmitData_Write
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
and that is the lastest firmware from sam mobile
if anyone can help me i really appericate it
Click to expand...
Click to collapse
I don't know if you tried already, but perhaps you could simultaneously flash a PIT file (hsbadr has a post over this) and a stock firmware image in ODIN. This should fix any borked partitions, if there are any. If this doesn't work, then I'm afraid I can't help you further. You'd have to wait on someone more knowledgeable than me. Or, you can take it into a verizon store or best-buy and ask for help there?
SirLaughsalot said:
I don't know if you tried already, but perhaps you could simultaneously flash a PIT file (hsbadr has a post over this) and a stock firmware image in ODIN. This should fix any borked partitions, if there are any. If this doesn't work, then I'm afraid I can't help you further. You'd have to wait on someone more knowledgeable than me. Or, you can take it into a verizon store or best-buy and ask for help there?
Click to expand...
Click to collapse
Were can i find this post at
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
Alright that actually worked it flashed and did not fail , Thanks alot your a life saver now my second question is When i boot the Phone Up and it shows the picture Samsung Galaxy Note 4 Andriod how do i get the Custom part on it to go off with the lock ?
pfcland said:
Alright that actually worked it flashed and did not fail , Thanks alot your a life saver now my second question is When i boot the Phone Up and it shows the picture Samsung Galaxy Note 4 Andriod how do i get the Custom part on it to go off with the lock ?
Click to expand...
Click to collapse
Is this on first boot go through set up and when your on the home screen power off the phone then power it on and if you were on cm 13 and flashed it with TWRP you tripped Knox so if powering off doesn't work then you can't get rid of it without rooting
Bren123 said:
Is this on first boot go through set up and when your on the home screen power off the phone then power it on and if you were on cm 13 and flashed it with TWRP you tripped Knox so if powering off doesn't work then you can't get rid of it without rooting
Click to expand...
Click to collapse
Yea it shows it on first boot shows a lock that is unlocked
pfcland said:
Yea it shows it on first boot shows a lock that is unlocked
Click to expand...
Click to collapse
OK complete setup when it gets off verizon screen then power it off and power it back on
Sent from my SM-N910V using Tapatalk
Bren123 said:
OK complete setup when it gets off verizon screen then power it off and power it back on
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Ok it is gone thanks alot man
Download this app called Samsung phone info from Google play and look at Knox warranty void if it shows up with 0x1 your warranty is voided I'm not sure if there is a way to reset it back to 0x0.
Bren123 said:
Download this app called Samsung phone info from Google play and look at Knox warranty void if it shows up with 0x1 your warranty is voided I'm not sure if there is a way to reset it back to 0x0.
Click to expand...
Click to collapse
it shows Ox1 but i am not worried about it because my phone is paid off
pfcland said:
it shows Ox1 but i am not worried about it because my phone is paid off
Click to expand...
Click to collapse
Oh OK cool.
Sent from my SM-N910V using Tapatalk
---------- Post added at 04:38 AM ---------- Previous post was at 04:37 AM ----------
pfcland said:
Ok it is gone thanks alot man
Click to expand...
Click to collapse
Your Welcome. [emoji3]
Sent from my SM-N910V using Tapatalk
pfcland said:
Alright that actually worked it flashed and did not fail , Thanks alot your a life saver now my second question is When i boot the Phone Up and it shows the picture Samsung Galaxy Note 4 Andriod how do i get the Custom part on it to go off with the lock ?
Click to expand...
Click to collapse
I'm at the exact point as he was but I haven't been able to try verizon software update assistant yet. However, I'm not able to install the PIT and TAR he used. Here's what I get. Any ideas? Under options I have the first three checked (auto reboot, re partition, f reset time).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT 1: Unchecked auto reboot and switched COM PORTS and it worked! THANK YOU!!!
droiddude414 said:
I'm at the exact point as he was but I haven't been able to try verizon software update assistant yet. However, I'm not able to install the PIT and TAR he used. Here's what I get. Any ideas? Under options I have the first three checked (auto reboot, re partition, f reset time).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT 1: Unchecked auto reboot and switched COM PORTS and it worked! THANK YOU!!!
Click to expand...
Click to collapse
Do this
Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
1. Extract odin into a desktop folder
2. Extract the tar from the zip and place it in the odin folder .
3. Place the PIT file inside the odin folder
4. Open odin folder
5. Run odin
6. In the left you should see some menues click on the one that says PIT
7. Now browse for thr PIT file and select it
8. Now Click on the AP button and select the TAR file in the odin folder .
9. Wait for it to load
10. Now make sure the re partition is not check marked .
11. Now click start and it should flash succesfully.
It will reboot and show the lock screen but one you reboot again it should be gone
Hope this helps
Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
Bren123 (or anyone who can help), I am having a same type of problem flashing in Odin. I would like to put my phone back to kitkat, back when it was smooth and fast. When I have tried to flash with Odin it failed everytime, however it was an older version of Odin v3.10.7. I have a stock kitkat rom from Sam mobile. Can I load it with the newer Odin and the Pit file you shared links for? Any help would be appreciated!
Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
lugnuttz said:
Bren123 (or anyone who can help), I am having a same type of problem flashing in Odin. I would like to put my phone back to kitkat, back when it was smooth and fast. When I have tried to flash with Odin it failed everytime, however it was an older version of Odin v3.10.7. I have a stock kitkat rom from Sam mobile. Can I load it with the newer Odin and the Pit file you shared links for? Any help would be appreciated!
Click to expand...
Click to collapse
I tried again with the never version of odin and it still does not work for me. This is what I get:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help me get my phone back to kitkat???
I can only flash marshmallow, or now lollipop v5.11, after following the instructions above. I still can't get the kitkat firmware to work.
Please help!
Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
thank you, this helped me out when my odin got stuck for 30+ minutes.
I use to have a Note 4 Verizon good cell, but I then change it to a T-Mobile N910T unlock easer to flash them no boot-loaders are blocked, but thats just my saying.
I went through the process ... i have root and i can only install a 5.1.1 rom for the life of me i am unable to flash any 6 or 7 roms ... ideas?
Get write failure
I know this has been a couple years but I am in the same boat . I went through the steps and I get a flash write failure?
It happens after about 40 seconds into
system.img.ext4
ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> FAIL! (Write)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
hi my phone interputerd while updating and i get firware upgrade encountered an issue.kies cant see my phone i downloaded stock room and flash it through odin as below
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ3_N7100OJVALJ2_N7100XXALJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
odin passed
phone went back to firware upgrade encountered an issue please select recovery mode in kies
please help
elaria1984 said:
hi my phone interputerd while updating and i get firware upgrade encountered an issue.kies cant see my phone i downloaded stock room and flash it through odin as below
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ3_N7100OJVALJ2_N7100XXALJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
odin passed
phone went back to firware upgrade encountered an issue please select recovery mode in kies
please help
Click to expand...
Click to collapse
What recovery are you using?
Stock?
If yes..
Try getting TWRP or CWM..
You can reboot to system through them or flash a rom or something..
Sent from my GT-N7100
Mohammed779 said:
What recovery are you using?
Stock?
If yes..
Try getting TWRP or CWM..
You can reboot to system through them or flash a rom or something..
Sent from my GT-N7100
Click to expand...
Click to collapse
i can only access download mode cant access cwm
please guys help
At first try another firmware (a newer one than N7100XXALJ3...)
If it doesn't chage try a factory firmware but normally this error message just means that you have to flash an 'one package' firmware.
Memphis_ said:
At first try another firmware (a newer one than N7100XXALJ3...)
If it doesn't chage try a factory firmware but normally this error message just means that you have to flash an 'one package' firmware.
Click to expand...
Click to collapse
i have tried 5 roms all the same in odin it pass phone try to reboot and go back to that message connect to kies for recovery.
any thoughts ?
Did you try a factory firmware?
A restore from Kies could be possible but I never tried: http://forum.xda-developers.com/showthread.php?t=2088809
Memphis_ said:
Did you try a factory firmware?
A restore from Kies could be possible but I never tried: http://forum.xda-developers.com/showthread.php?t=2088809
Click to expand...
Click to collapse
not all devices supprted in kies to do the above.
i cant find the factory firmware i wrote in google but i i didnt get anything could you please giude me from where to get it.
my device is GT-N7100
elaria1984 said:
not all devices supprted in kies to do the above.
i cant find the factory firmware i wrote in google but i i didnt get anything could you please giude me from where to get it.
my device is GT-N7100
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5
Memphis_ said:
http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5
Click to expand...
Click to collapse
i know i am asking tooo much please bare with me i dont know which one to donwload can i donwload anyone ? what is the diffrents between the three ?
elaria1984 said:
i know i am asking tooo much please bare with me i dont know which one to donwload can i donwload anyone ? what is the diffrents between the three ?
Click to expand...
Click to collapse
N7100XXDMB2 => not PIT file so forget it
N7100XXDLL7 => PIT file OK
N7100XXDLJ2 => PIT file OK
But DLJ2 doesn't have some important fixs so take the firmware XXDLL7.
Memphis_ said:
N7100XXDMB2 => not PIT file so forget it
N7100XXDLL7 => PIT file OK
N7100XXDLJ2 => PIT file OK
But DLJ2 doesn't have some important fixs so take the firmware XXDLL7.
Click to expand...
Click to collapse
thanks man the download didnt fininsh yet . once done i will get back with the result hope hope it will work
thanks man it didnt work i took it to samsung this morining they will fix it they charged me 40 $
Sorry mate...
Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.
re: odin flash
Trong357 said:
Is it possible to do a factory reset with Odin? I flashed this rom http://forum.xda-developers.com/showthread.php?t=2268880 on to my phone but it's on M919UVUEMK2. Currently, my phone is soft bricked and I can only go into download mode and I can't install the clockwork recovery mod. My phone will boot to the Galaxy S4 logo and turnoff.
Click to expand...
Click to collapse
About the only thing you can do is start all over again and put your phone into download
mode and flash the official stock samsung 4.2.2 MDL odin flash firmware.
After that you can root and odin flash twrp or cwm custom recovery.
Here is a link for the official samsung m919 4.2.2 stock mdl firmware:
http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
After downloading unzip and you will find the .TAR file which you
need to use with Odin in it's PDA slot.
Good luck!
How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium
xperia_88 said:
How can I see my modem on my phone. I just want to be sure what the modem I have now.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
In Settings/More/About device/Baseband
☞ Sent from here☜???
Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Trong357 said:
Thanks but it didn't work. Odin keeps say it failed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You're using a stock FW to go from 4.3 to 4.2.2 which is not possible. You have to use a 4.3 stock FW to go back to stock. Once you're on the 4.3 boot loader, you're stuck with 4.3. You can NOT downgrade to a different bootloader.
---------- Post added at 01:09 AM ---------- Previous post was at 01:05 AM ----------
Download the 4.3 FW from here, should be the first link.
Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."
re: official stock m919 firmware
Trong357 said:
Thanks but:"Hotfile has been shudown. A download link to Terafile will be presented as soon as the firmware is uploaded. We are busy uploading all files to the new host. We apologize for the inconvenience."
Click to expand...
Click to collapse
Here is the identical firmware as found on SamMobile.com
This is the M919UVUEMK2_M919TMBEMK2_TMB.zip
This contains the TAR file for the official Samsung M919 MK2 4.3 stock firmware.
Here is the direct download link: https://copy.com/hzfaqBpWhinn/M919UVUEMK2_M919TMBEMK2_TMB.zip?download=1
This is a much faster mirror than the Hotfile host which SamMobile uses.
Good luck!
Thanks and thank you and to everyone else who helped. The rom installed successfully but when I tried to turn the phone on, it gets to the T-Mobile splash screen and doesn't go on from there. I left it there for nearly 30 min but it didn't load and the phone was very hot. I re-Odin the rom and tried wiping cache partition and dalvik in recovery but the phone never goes past the T-Mobile screen.
Misterjunky, sir. Thank you!. Your link helped me to unbrick. I've a working ROM now. My root is gone, wifi slightly flaky - but hey can make calls etc.!
I am on 4.3 + MK2 now. My warranty is void etc..but really thank u very much!.
Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!
rongregoryred said:
Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!
Click to expand...
Click to collapse
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.
CCallahan said:
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.
Click to expand...
Click to collapse
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.
rongregoryred said:
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.
Click to expand...
Click to collapse
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/
I had a similar problem with my note 8.0. I can't remember exactly what I did but I managed to get it to reboot. It'll reboot to download but after it booted into download mode my Odin was able to find it.
---------- Post added at 09:19 PM ---------- Previous post was at 09:03 PM ----------
I think maybe holding down the power button should reboot it.
CCallahan said:
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/
Click to expand...
Click to collapse
Tried heimdall, but no work. I think it's because of Knox. It won't flash Stock rom through Odin or heimdall.
BTW, i flashed a recovery through Odin and it works. Now im running a Custom Rom. Thanks for the help guys!
I'm currently in the same situation
What recovery did you flash?
I odin 4.4.4 poland.. it failed, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies
I can't go to recovery, I tried to odin recovery but no luck
and in odin mode it says Secure Download : enabled
EDIT: I use philz_touch_6.48.4-n5100.tar.md5.. and it works
So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!
hereisalex said:
So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!
Click to expand...
Click to collapse
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk
Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Misterjunky said:
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
hereisalex said:
Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Click to expand...
Click to collapse
Here is the correct firmware and download link for the S6 EDGE+ phone.
https://www.androidfilehost.com/?fid=24052804347822287
Good luck.
Sent from my SM-G928T using Tapatalk
Misterjunky said:
Here is the correct firmware and download link for the S6 EDGE+ phone.
==========================================================
Good luck.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.
hereisalex said:
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.
Click to expand...
Click to collapse
Yes you can, follow the link below for full instructions .
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Good luck..
Sent from my SM-G928T using Tapatalk
It's still not working. It will boot up, play the T-Mobile jingle, and show me the lock screen, and then reboot after about half a second. This repeats indefinitely. Please help?
I've searched high, and I've search low for firmware for my phone (only to be led to sites whose download speed is atrocious).
My phone model is: SM-N910P
I've been searching for the .tar files for the firmware updates. The MD5 is either not valid by Odin's standard or something else.
Can someone point me along to a link of the latest Note 4 Stock Firmware update from a site that doesn't take all day to download from? Thanks Kindly.
P.s. Yes, I have gone through website and threads posting link to the correct firmware but all of them have not been MD5 correct or worked at all.
I'm also experiancing frequent crashes/restarts on the phone.
I got this phone from a family friend and its been acting weird in ways that are outside my comphrenension. It's rooted and they need it to factory state but all theses errors, problems, slow downloads, are making it near impossible.
Try downloading stock tar from this thread with your PC. You can and should verify the md5 before flashing in Odin when md5 is provided.
http://forum.xda-developers.com/showthread.php?p=63868221
Sent from my SM-N930P using Tapatalk
I flashed the file you linked to and this is what i got in Odin
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1101)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> aboot.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> sbl1.mbn
<ID:0/009> rpm.mbn
<ID:0/009> tz.mbn
<ID:0/009> sdi.mbn
<ID:0/009> NON-HLOS.bin
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> system.img.ext4
<ID:0/009> FAIL! (Write)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
gordonfrohman said:
I flashed the file you linked to and this is what i got in Odin
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Odin engine v(ID:3.1101)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
aboot.mbn
NAND Write Start!!
sbl1.mbn
rpm.mbn
tz.mbn
sdi.mbn
NON-HLOS.bin
boot.img
recovery.img
system.img.ext4
FAIL! (Write)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Questions:
Which stock tar did you flash? (see end of this post)
Does the phone frequently reboot or boot to download mode (reporting) failure to normal boot? Any eMMC failures reported?
Things to check or try if non applicable:
Factory reset in stock recovery if no OS is installed. If you can boot OS, make sure that Settings/Security/reactivation lock is disabled and enable developer mode and enable USB debugging.
Verify correct Samsung driver installed on PC or uninstall and reinstall from Samsung support for Note 4.
Use original Samsung Note 4 cable or replace. A good quality USB data cable should work but if replacing, use OEM replacement.
Run Odin in administrative mode. Try the suggested Odin version (3.10.7 or 3.10.6) or latest version from here: http://forum.xda-developers.com/showpost.php?p=51767811&postcount=1
(Odd reported issues sometimes result in one of these reported as successful where various others weren't).
Try another USB port, cable or PC
Edit: All KIES and Smart Switch sessions should be killed prior to starting Odin session.
Do not Odin older stock tars; usable stock tars start at OG5 and up.
Sent from my SM-N930P using Tapatalk