Develop Bugs

[N5100 Can't flash stock rom via ODIN] HELP!

Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!

rongregoryred said:
Hi, i have a GT-N5100 running 4.4.2 Kitkat
My problem is i can't boot to recovery and it says:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again later.
But i can boot in Download Mode.
My phone keeps blinking and it won't charge, so, I've tried to flash the stock rom via ODIN and it says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5100XXDNG2_N5100OXEDNG1_N5100XXDNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
While flashing the ROM, i saw this code:
Code:
KNOX WARRANTY VOID 0
RP SWREV A1
And I've tried several times, but it always FAILS!
I've tried to go to Recovery mode through Kies,
>Firmware Upgrade and Initialisation >Type the Model Name: and it did not detect the Phone.
Hoping that someone can help me with this. Thanks guys!
Click to expand...
Click to collapse
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.

CCallahan said:
Use Odin v3.07 and flash in PDA mode. Also, make sure you have the right tar file for your Note and turn Kies off so it doesn't interfere with Odin.
Click to expand...
Click to collapse
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.

rongregoryred said:
Thanks! I will try that! :good:
Edit: Fail. Did'nt work also. Hmm. I will try kies again.
Click to expand...
Click to collapse
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/

I had a similar problem with my note 8.0. I can't remember exactly what I did but I managed to get it to reboot. It'll reboot to download but after it booted into download mode my Odin was able to find it.
---------- Post added at 09:19 PM ---------- Previous post was at 09:03 PM ----------
I think maybe holding down the power button should reboot it.

CCallahan said:
If you are sure you have the correct file for your device and are using Odin correctly, might try using Heimdall to flash instead of Odin: http://glassechidna.com.au/heimdall/
Click to expand...
Click to collapse
Tried heimdall, but no work. I think it's because of Knox. It won't flash Stock rom through Odin or heimdall.
BTW, i flashed a recovery through Odin and it works. Now im running a Custom Rom. Thanks for the help guys!

I'm currently in the same situation
What recovery did you flash?
I odin 4.4.4 poland.. it failed, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies
I can't go to recovery, I tried to odin recovery but no luck
and in odin mode it says Secure Download : enabled
EDIT: I use philz_touch_6.48.4-n5100.tar.md5.. and it works

[Q] [solved] i9195 - doesn't work mobile network and wifi

Hi guys,
after a lot of problem with my s4mini now the phone doesn't call and doesn't active the wifi connection. I've tried to flash all the modem i found, but every time the process is concluded with a fail (in odin)...
So i don't know i can i do.
Thanks to all
Atlantis

Try flashing a complete new firmware with Odin.

RoyaLKurTx3 said:
Try flashing a complete new firmware with Odin.
Click to expand...
Click to collapse
I tried many times but evrytime the process ends with a fail... Odin lets me flash only te recoverys...

atlantis87 said:
I tried many times but evrytime the process ends with a fail... Odin lets me flash only te recoverys...
Click to expand...
Click to collapse
Tell me all the steps that you are doing. And if you can, provide me some screenshots.

RoyaLKurTx3 said:
Tell me all the steps that you are doing. And if you can, provide me some screenshots.
Click to expand...
Click to collapse
Everything starts wit a mistake. I had CM snapshot 12 and i tried to flash the stock rom. Probably i wrong the version of the stock firmware. When the process ends with a fail the phone was softbriccked... I tried many things (exactly i don't remeber every thing i done...) and at the end th only way i found was to flash a new recovery. After that i flash CM12 but when i turn on the phone all the mobile connection (network and wifi) don't work... I tried to flash a lot of different modem but no one works...
I attach the screenshot of the dowload mode...
Thanks

atlantis87 said:
Everything starts wit a mistake. I had CM snapshot 12 and i tried to flash the stock rom. Probably i wrong the version of the stock firmware. When the process ends with a fail the phone was softbriccked... I tried many things (exactly i don't remeber every thing i done...) and at the end th only way i found was to flash a new recovery. After that i flash CM12 but when i turn on the phone all the mobile connection (network and wifi) don't work... I tried to flash a lot of different modem but no one works...
I attach the screenshot of the dowload mode...
Thanks
Click to expand...
Click to collapse
hi man try this :1 instal a custom CWM....2 enter to recovery mode 3-wipe data factory and wipe cach..3 format dalvik cach 4 format system and format modem...5 enter to odin mode 6 flach your stock rom 7 enjoy

Hi man. I have already tried step 1 2 3. Do you know how can i format statemi and modem? Thanks

atlantis87 said:
Hi man. I have already tried step 1 2 3. Do you know how can i format statemi and modem? Thanks
Click to expand...
Click to collapse
ok men 1 go to recovery 2 go to mounts and storage 3 format system 4 format modem 5 fomat cache.and after this flash your stock rom

ok, i tried and....
nothing
when i try to flash something odin answer the row below...
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
But... a question... in the download mode the last row is "WRITE PROTECTION: ENABLED"... Can influence somthing this thing??
Thanks

Be careful when you format system, it's dangerous and the only fix for it is flashing a ROM.
Try these:
1. Download this and extract the files in the ZIP: http://www.sammobile.com/firmwares/download/40040/I9195XXUCNK4_I9195OXXCNK5_SEE.zip/
2. You should get 2 files;
I9195XXUCNK4_I9195OXXCNK5_I9195XXUCNK4_HOME.tar.md5
SS_DL.dll
Ignore the SS_DL.dll. You will use the other file.
3. Go to Odin and thick only 'Auto Reboot' and 'F. Reset Time'. Now Insert the .tar.md5 I named above in the AP place.
4. Turn off your phone and boot into recovery. Clear data and cache. Now restart to download mode.
5. If you are asked to continue or to cancel and restart phone, choose continue.
6. Keep your phone like that and check that you have this (or similar) layout in Odin;
Now press start and wait until everything have finished and your phone boots (May take 8-11 minutes) If you followed these steps and you got a fail, then you must have done something wrong or your phone has something wrong in terms of hardware. Good Luck mate.

atlantis87 said:
ok, i tried and....
nothing
when i try to flash something odin answer the row below...
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
But... a question... in the download mode the last row is "WRITE PROTECTION: ENABLED"... Can influence somthing this thing??
Thanks
Click to expand...
Click to collapse
put your rom file in odin in (ap)....you can download your rom from sammobile.and try again try the metode up

RoyaLKurTx3 said:
Be careful when you format system, it's dangerous and the only fix for it is flashing a ROM.
Try these:
1. Download this and extract the files in the ZIP: http://www.sammobile.com/firmwares/download/40040/I9195XXUCNK4_I9195OXXCNK5_SEE.zip/
2. You should get 2 files;
I9195XXUCNK4_I9195OXXCNK5_I9195XXUCNK4_HOME.tar.md5
SS_DL.dll
Ignore the SS_DL.dll. You will use the other file.
3. Go to Odin and thick only 'Auto Reboot' and 'F. Reset Time'. Now Insert the .tar.md5 I named above in the AP place.
4. Turn off your phone and boot into recovery. Clear data and cache. Now restart to download mode.
5. If you are asked to continue or to cancel and restart phone, choose continue.
6. Keep your phone like that and check that you have this (or similar) layout in Odin;
Now press start and wait until everything have finished and your phone boots (May take 8-11 minutes) If you followed these steps and you got a fail, then you must have done something wrong or your phone has something wrong in terms of hardware. Good Luck mate.
Click to expand...
Click to collapse
Hi,
i tried also this... Odin says:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
... i'm little bit disperate...

You inserted a modem.tar.md5 not the file I told you.

atlantis87 said:
Hi,
i tried also this... Odin says:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
... i'm little bit disperate...
Click to expand...
Click to collapse
dont be afraid my friend this is simple...so dont put the file in the modem pit it at (ap) colone...try a difirent odin v 3.09 okey ..dont missed to extract the zip file for your file rom okey and gry again

RoyaLKurTx3 said:
You inserted a modem.tar.md5 not the file I told you.
Click to expand...
Click to collapse
Sorry, i wrongly paste the odin row... The follow row are the correct...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195OXXCNK5_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

atlantis87 said:
Sorry, i wrongly paste the odin row... The follow row are the correct...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195OXXCNK5_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try everything again on a different computer, if you can.

RoyaLKurTx3 said:
Try everything again on a different computer, if you can.
Click to expand...
Click to collapse
Ok, thanks... i made all these trial on a macbook using vmware fusion with windows 8. I can try on another mac (with vmware and windows 8)... Do you think that can be work with another mac or is necessary to try with a pc?

atlantis87 said:
Ok, thanks... i made all these trial on a macbook using vmware fusion with windows 8. I can try on another mac (with vmware and windows 8)... Do you think that can be work with another mac or is necessary to try with a pc?
Click to expand...
Click to collapse
Try using windows.

RoyaLKurTx3 said:
Try using windows.
Click to expand...
Click to collapse
i tried and.... it works! However wifi and mobile network don't work. Do you have any other suggestion?
Thanks

RoyaLKurTx3 said:
Try using windows.
Click to expand...
Click to collapse
Maybe i found something... My IMEI is null... and i don't have a backup...

Stupid question, sorry, but I bricked my phone and I'm stumped...

So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!

hereisalex said:
So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!
Click to expand...
Click to collapse
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk

Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Misterjunky said:
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse

hereisalex said:
Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Click to expand...
Click to collapse
Here is the correct firmware and download link for the S6 EDGE+ phone.
https://www.androidfilehost.com/?fid=24052804347822287
Good luck.
Sent from my SM-G928T using Tapatalk

Misterjunky said:
Here is the correct firmware and download link for the S6 EDGE+ phone.
==========================================================
Good luck.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.

hereisalex said:
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.
Click to expand...
Click to collapse
Yes you can, follow the link below for full instructions .
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Good luck..
Sent from my SM-G928T using Tapatalk

It's still not working. It will boot up, play the T-Mobile jingle, and show me the lock screen, and then reboot after about half a second. This repeats indefinitely. Please help?

I think my phone is bricked

Hey all I'm not sure what happened but I reflashed to stock KitKat and while I did that I installed all the newest updates to receive Lolipop and after I finished that I downloaded CF-AutoRoot. I rooted it and got stuck with a bootloop so I went into the stock recovery and erased everything. So I repeated step one by reflashing KitKat and now Odin is giving me an error and it isn't working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I'm about to pull my hair out

gfp11289 said:
Hey all I'm not sure what happened but I reflashed to stock KitKat and while I did that I installed all the newest updates to receive Lolipop and after I finished that I downloaded CF-AutoRoot. I rooted it and got stuck with a bootloop so I went into the stock recovery and erased everything. So I repeated step one by reflashing KitKat and now Odin is giving me an error and it isn't working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I'm about to pull my hair out
Click to expand...
Click to collapse
You have a dev edition or retail?

Retail I believe
Could I just go into TWRP, go to my computer, put on a ROM, transfer it to my phone, and then install something from there?
I don't really care about stock at this point

gfp11289 said:
Retail I believe
Could I just go into TWRP, go to my computer, put on a ROM, transfer it to my phone, and then install something from there?
I don't really care about stock at this point
Click to expand...
Click to collapse
If you're able to get in TWRP you do not have retail version. Do you have any ROMs or TWRP backups on an SD card? The CF-autoroot part is confusing me I don't remember ever having to use that.

jcip17 said:
If you're able to get in TWRP you do not have retail version. Do you have any ROMs or TWRP backups on an SD card? The CF-autoroot part is confusing me I don't remember ever having to use that.
Click to expand...
Click to collapse
Nope none. I tried downloading about 4 different stock roms and they all give me the same error in Odin.
I'm able to get into TWRP and Custom OS but that's it. The phone just keeps restarting after the Note 4 logo

gfp11289 said:
Nope none. I tried downloading about 4 different stock roms and they all give me the same error in Odin.
I'm able to get into TWRP and Custom OS but that's it. The phone just keeps restarting after the Note 4 logo
Click to expand...
Click to collapse
You can't flash stock roms (.zip files)in ODIN. They need to be .tar files
First check under your battery it should say developer device. If not you have a retail version. If you do have developer edition try to go through these steps and hopefully you will be okay. .
http://forum.xda-developers.com/note-4-verizon/development/how-to-custom-recovery-root-t2923340
If you have a retail version try this.
http://forum.xda-developers.com/not...nt/verizon-note-4-firmware-odin-file-t2926827
You said you accepted the lollipop update when you were on Kit Kat?

I need the Sprint firmware but it doesn't say anything about Developer or Retail under the battery
Model: SM-N910P

gfp11289 said:
I need the Sprint firmware but it doesn't say anything about Developer or Retail under the battery
Model: SM-N910P
Click to expand...
Click to collapse
Woh don't do anything I said. You're in the wrong forum
Try to seek help here
http://forum.xda-developers.com/note-4-sprint​

Oh shoot I didn't even realize I was in the Verizon forum. Sorry

gfp11289 said:
Oh shoot I didn't even realize I was in the Verizon forum. Sorry
Click to expand...
Click to collapse
Hey on the bright side you're a senior member now :highfive:
Hope you get your phone working !

jcip17 said:
Hey on the bright side you're a senior member now :highfive:
Hope you get your phone working !
Click to expand...
Click to collapse
Me too
Do you have any ideas possibly? If I'm able to get into TWRP and I put a ROM on a micro sd card, couldn't I just install it from there?

gfp11289 said:
Me too
Do you have any ideas possibly? If I'm able to get into TWRP and I put a ROM on a micro sd card, couldn't I just install it from there?
Click to expand...
Click to collapse
Yes definitely just do an advance wipe and wipe data, system, cache, and dalvik cache before. But don't confuse TWRP with the stock recovery. TWRP is a custom recovery.

Verizon Note 4 Will not flash in Odin

Alright i did a major mess up on my phone , Alright so i was rooted and was on CM13 well i decided to go back to stock rom so i downloaded the lastest Firmware and use odin to flash it and while it was flashing it failed . So i pulled the battery and restarted the phone and now i am hit with the ( Your device didn't update succesfully. Use the Verizon Software repair assistant to repair your deivce ) So i did that and it fails at 84% So i tryed reflashing again via odin and i keep getting failed well when i tryed flashing CF-Auto root to just see if it did anything it failed but when i booted the phone up it went stright to the samsung logo and boot looped so i was ok so i went into recovery and tryed to wipe /factory reset but keep getting a error .
So my thing is idk what to do i have tryed flashing via odin and it keeps failing i get this
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> __XmitData_Write
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
and that is the lastest firmware from sam mobile
if anyone can help me i really appericate it

pfcland said:
Alright i did a major mess up on my phone , Alright so i was rooted and was on CM13 well i decided to go back to stock rom so i downloaded the lastest Firmware and use odin to flash it and while it was flashing it failed . So i pulled the battery and restarted the phone and now i am hit with the ( Your device didn't update succesfully. Use the Verizon Software repair assistant to repair your deivce ) So i did that and it fails at 84% So i tryed reflashing again via odin and i keep getting failed well when i tryed flashing CF-Auto root to just see if it did anything it failed but when i booted the phone up it went stright to the samsung logo and boot looped so i was ok so i went into recovery and tryed to wipe /factory reset but keep getting a error .
So my thing is idk what to do i have tryed flashing via odin and it keeps failing i get this
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> __XmitData_Write
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
and that is the lastest firmware from sam mobile
if anyone can help me i really appericate it
Click to expand...
Click to collapse
I don't know if you tried already, but perhaps you could simultaneously flash a PIT file (hsbadr has a post over this) and a stock firmware image in ODIN. This should fix any borked partitions, if there are any. If this doesn't work, then I'm afraid I can't help you further. You'd have to wait on someone more knowledgeable than me. Or, you can take it into a verizon store or best-buy and ask for help there?

SirLaughsalot said:
I don't know if you tried already, but perhaps you could simultaneously flash a PIT file (hsbadr has a post over this) and a stock firmware image in ODIN. This should fix any borked partitions, if there are any. If this doesn't work, then I'm afraid I can't help you further. You'd have to wait on someone more knowledgeable than me. Or, you can take it into a verizon store or best-buy and ask for help there?
Click to expand...
Click to collapse
Were can i find this post at

ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop

Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
Alright that actually worked it flashed and did not fail , Thanks alot your a life saver now my second question is When i boot the Phone Up and it shows the picture Samsung Galaxy Note 4 Andriod how do i get the Custom part on it to go off with the lock ?

pfcland said:
Alright that actually worked it flashed and did not fail , Thanks alot your a life saver now my second question is When i boot the Phone Up and it shows the picture Samsung Galaxy Note 4 Andriod how do i get the Custom part on it to go off with the lock ?
Click to expand...
Click to collapse
Is this on first boot go through set up and when your on the home screen power off the phone then power it on and if you were on cm 13 and flashed it with TWRP you tripped Knox so if powering off doesn't work then you can't get rid of it without rooting

Bren123 said:
Is this on first boot go through set up and when your on the home screen power off the phone then power it on and if you were on cm 13 and flashed it with TWRP you tripped Knox so if powering off doesn't work then you can't get rid of it without rooting
Click to expand...
Click to collapse
Yea it shows it on first boot shows a lock that is unlocked

pfcland said:
Yea it shows it on first boot shows a lock that is unlocked
Click to expand...
Click to collapse
OK complete setup when it gets off verizon screen then power it off and power it back on
Sent from my SM-N910V using Tapatalk

Bren123 said:
OK complete setup when it gets off verizon screen then power it off and power it back on
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Ok it is gone thanks alot man

Download this app called Samsung phone info from Google play and look at Knox warranty void if it shows up with 0x1 your warranty is voided I'm not sure if there is a way to reset it back to 0x0.

Bren123 said:
Download this app called Samsung phone info from Google play and look at Knox warranty void if it shows up with 0x1 your warranty is voided I'm not sure if there is a way to reset it back to 0x0.
Click to expand...
Click to collapse
it shows Ox1 but i am not worried about it because my phone is paid off

pfcland said:
it shows Ox1 but i am not worried about it because my phone is paid off
Click to expand...
Click to collapse
Oh OK cool.
Sent from my SM-N910V using Tapatalk
---------- Post added at 04:38 AM ---------- Previous post was at 04:37 AM ----------
pfcland said:
Ok it is gone thanks alot man
Click to expand...
Click to collapse
Your Welcome. [emoji3]
Sent from my SM-N910V using Tapatalk

pfcland said:
Alright that actually worked it flashed and did not fail , Thanks alot your a life saver now my second question is When i boot the Phone Up and it shows the picture Samsung Galaxy Note 4 Andriod how do i get the Custom part on it to go off with the lock ?
Click to expand...
Click to collapse
I'm at the exact point as he was but I haven't been able to try verizon software update assistant yet. However, I'm not able to install the PIT and TAR he used. Here's what I get. Any ideas? Under options I have the first three checked (auto reboot, re partition, f reset time).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT 1: Unchecked auto reboot and switched COM PORTS and it worked! THANK YOU!!!

droiddude414 said:
I'm at the exact point as he was but I haven't been able to try verizon software update assistant yet. However, I'm not able to install the PIT and TAR he used. Here's what I get. Any ideas? Under options I have the first three checked (auto reboot, re partition, f reset time).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT 1: Unchecked auto reboot and switched COM PORTS and it worked! THANK YOU!!!
Click to expand...
Click to collapse
Do this
Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
1. Extract odin into a desktop folder
2. Extract the tar from the zip and place it in the odin folder .
3. Place the PIT file inside the odin folder
4. Open odin folder
5. Run odin
6. In the left you should see some menues click on the one that says PIT
7. Now browse for thr PIT file and select it
8. Now Click on the AP button and select the TAR file in the odin folder .
9. Wait for it to load
10. Now make sure the re partition is not check marked .
11. Now click start and it should flash succesfully.
It will reboot and show the lock screen but one you reboot again it should be gone
Hope this helps

Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
Bren123 (or anyone who can help), I am having a same type of problem flashing in Odin. I would like to put my phone back to kitkat, back when it was smooth and fast. When I have tried to flash with Odin it failed everytime, however it was an older version of Odin v3.10.7. I have a stock kitkat rom from Sam mobile. Can I load it with the newer Odin and the Pit file you shared links for? Any help would be appreciated!

Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
lugnuttz said:
Bren123 (or anyone who can help), I am having a same type of problem flashing in Odin. I would like to put my phone back to kitkat, back when it was smooth and fast. When I have tried to flash with Odin it failed everytime, however it was an older version of Odin v3.10.7. I have a stock kitkat rom from Sam mobile. Can I load it with the newer Odin and the Pit file you shared links for? Any help would be appreciated!
Click to expand...
Click to collapse
I tried again with the never version of odin and it still does not work for me. This is what I get:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help me get my phone back to kitkat???
I can only flash marshmallow, or now lollipop v5.11, after following the instructions above. I still can't get the kitkat firmware to work.
Please help!

Bren123 said:
ok first make sure you are using this odin https://www.androidfilehost.com/?fid=312968872162493207
Make sure you use this pit https://www.androidfilehost.com/?fid=95784891001613364
Then make sure you are using this tar https://www.androidfilehost.com/?fid=24411628330026105
Extract odin and put it any where then extract the tar from the zip and go to the odin I uploaded in the left theirs a tab labeled pit click that and click pit in that tab select the pit i gave you than go to AP and and go to where you extracted that tar and select it wait for it to check MD5 it may stop responding just wait than click start and wait for it to flash than you should be on stock unrooted lollipop
Click to expand...
Click to collapse
thank you, this helped me out when my odin got stuck for 30+ minutes.

I use to have a Note 4 Verizon good cell, but I then change it to a T-Mobile N910T unlock easer to flash them no boot-loaders are blocked, but thats just my saying.

I went through the process ... i have root and i can only install a 5.1.1 rom for the life of me i am unable to flash any 6 or 7 roms ... ideas?

Get write failure
I know this has been a couple years but I am in the same boat . I went through the steps and I get a flash write failure?
It happens after about 40 seconds into
system.img.ext4
ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> FAIL! (Write)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)