September security patch issue - Micromax Canvas A1

I received the sept. security patch yesterday as usual . I downloaded it & then reboot my fon as usual . But this time strange happend though all the process went smoothly and as usual , when my phone get restarted after all the processes , it shows that still it is 5th august's update . I never face this type of problem before . Plz help me . Why this happened ?

Are u rooted or updated to patch as normal ?
---------- Post added at 07:48 AM ---------- Previous post was at 07:39 AM ----------
https://android.googleapis.com/pack.../588b9afcaada9fcb491253cc48c944ab9b76c72b.zip
Download the Patch from this link and then boot into stock recovery and flash it [only if u r on full stock ROM]
How to go into stock recovery ?
Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery
Then go to install update from SD card and locate the file that you had downloaded and tap install now you will be on September patch
Don't forget to press THANKS

No my phone is not root . And thank u so much boss

kc1989 said:
No my phone is not root . And thank u so much boss
Click to expand...
Click to collapse
Welcome

Related

Phone stuck on boot screen

Problem:
What happened was I was trying to root the darn thing it was working but I found out that the SGH-I927RUXKJ5_STOCK_ROOTED.tar.bz2 file from rapidshare file didn't download correctly and was damaged tar file and when it was rooting it was stuck at 40%. I turned my phone off and my phone has a black screen with "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." Once I reseted it now stuck on Rogers boot Screen.
How to fix:
Turn phone off, volume up and power botton and run Odin, Try Rooting your phone again.
Well if I remember right most Samsungs are impossible to hard brick it may be a soft brick you may still be in luck but Ive never dealt with a captivate glide in this situation so I can't help with your problem
-sent from my insanely awesome captivate glide-
I fixed my problem I checked around the forums thanks for the help.
Stellos said:
I fixed my problem I checked around the forums thanks for the help.
Click to expand...
Click to collapse
Just in case anyone else hits this, can you let us know how you fixed your issue?
Stellos said:
Last edited by Stellos; Yesterday at 11:39 PM. Reason: new problem .
Click to expand...
Click to collapse
What's the new problem? We'd be happy to help...
L4T
Same problem
How did you get it resolved?
My 4 day old Samsung Captivate Glide says:
Firmware Upgrade encountered an issue. Please select recovery mode in Kies & try again.
Boot into Download Mode - Turn phone off, hold volume up and power button, release power button when Samsung screen pops up, and then reflash to stock
Those key combinations don't bring up Samsung screen.
Link for stock Rom?
Aquethys said:
Boot into Download Mode - Turn phone off, hold volume up and power button, release power button when Samsung screen pops up, and then reflash to stock
Click to expand...
Click to collapse
If you can't get into flash mode try a battery pull, then push volume up and tap power. At the confirmation screen hit up arrow again. Stock ROMS are found on samfirmware.com
FIXED Firmware encountered a problem during kies!! SGH-I927
I wouldnt recommned updating to ICS especially through kies i had my phone stuck at "firmware upgrade encountered an issue please select recovery mode in kies and try again" for 2 days It was a disaster. So i came across a website called http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
I then downloaded the the I927UCLH2 ICS 4.0.4 Original Stock ROM using ODIN... FOLLOW DIRECTIONS THROUGH THE SITE NOT KIES!! BUT THE ORIGINAL STOCK ROM!
***After you have successfully completed the stock rom with ODIN***
Get a rom from http://forum.jakar.co/android-hack/1345758298/ Choose the ROM called Bio360 its almost the same Replica of Gingerbread its Version 2.3.5
VERY IMPORTANT!! Make sure you put the ZIP FILE (ROM) in your INTERNAL STORAGE NOT THE EXTERNAL!!! (SD CARD SLOT) BIG MISTAKE!!
Go to google and type in "CWM captivate glide new" click the first link beggining with www.theandroidsoul.com........ FOLLOW DIRECTIONS THROUGH THE SITE!
After you have downloaded the Rom (ZIP FILE) and CWM put your phone into Recovery mode by powering off the device. hold power button and the volume down button until you see clockwork recovery, from here you are going to look for install from sd card and look for the zip file/Rom Bio360 and you should be set!
*******THE Bio360 Rom is also Rooted so there is no need to do an extra step************
*** I HOPE THSI HELPS ANY PROBLEMS FEEL FREE TO INBOX ME ANY QUESTIONS*** I WILL TRY MY BEST TO HELP......
---------- Post added at 08:03 PM ---------- Previous post was at 07:44 PM ----------
Just go to google and type in captivate glide rom Bio360 click the very first link in XDA developers
Worked for me.
Thank you.
MzSantiago said:
I wouldnt recommned updating to ICS especially through kies i had my phone stuck at "firmware upgrade encountered an issue please select recovery mode in kies and try again" for 2 days It was a disaster. So i came across a website called http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
I then downloaded the the I927UCLH2 ICS 4.0.4 Original Stock ROM using ODIN... FOLLOW DIRECTIONS THROUGH THE SITE NOT KIES!! BUT THE ORIGINAL STOCK ROM!
***After you have successfully completed the stock rom with ODIN***
Get a rom from http://forum.jakar.co/android-hack/1345758298/ Choose the ROM called Bio360 its almost the same Replica of Gingerbread its Version 2.3.5
VERY IMPORTANT!! Make sure you put the ZIP FILE (ROM) in your INTERNAL STORAGE NOT THE EXTERNAL!!! (SD CARD SLOT) BIG MISTAKE!!
Go to google and type in "CWM captivate glide new" click the first link beggining with www.theandroidsoul.com........ FOLLOW DIRECTIONS THROUGH THE SITE!
After you have downloaded the Rom (ZIP FILE) and CWM put your phone into Recovery mode by powering off the device. hold power button and the volume down button until you see clockwork recovery, from here you are going to look for install from sd card and look for the zip file/Rom Bio360 and you should be set!
*******THE Bio360 Rom is also Rooted so there is no need to do an extra step************
*** I HOPE THSI HELPS ANY PROBLEMS FEEL FREE TO INBOX ME ANY QUESTIONS*** I WILL TRY MY BEST TO HELP......
---------- Post added at 08:03 PM ---------- Previous post was at 07:44 PM ----------
Just go to google and type in captivate glide rom Bio360 click the very first link in XDA developers
Click to expand...
Click to collapse

[Q]Hard Bricked KF during AOKP installation Blanck screen

well , I rooted my kindle without any problem , got TWRP running without problem , I'v Installed Glazed ICS and I liked it , then I tried to give AOKP a shot , so I downloaded the last version "5 I think " , then reset to recovery , wipe cache , system , and dalvik .
Installed AOKP without problem , then I saw an option to wipe dalvik "after installation " , so I tried it , and reboted .
Now when I press power Button , I got it flash with green color for 2 times " every time approx 1 second " then it turns off again .
I had it fully charged Before I did anything , and now I dont know what to do , I searched XDA/Google and the only thing I found is this :
http://forum.xda-developers.com/showthread.php?t=1430038
which I really cant understand , I think it is linux related , so if anyone please help my to find the right guide to start with , I dont Know how to search for the problem exactly .
Hold the power button for 1 min power it off then power on go straight to recovery do a full wipe of everything but your sdcard and restore a backup if you made one
---------- Post added at 03:52 AM ---------- Previous post was at 03:50 AM ----------
If not you will need to flash another rom or use firekit in that post if you have no access to recovery
Thepooch said:
Hold the power button for 1 min power it off then power on go straight to recovery do a full wipe of everything but your sdcard and restore a backup if you made one
---------- Post added at 03:52 AM ---------- Previous post was at 03:50 AM ----------
If not you will need to flash another rom or use firekit in that post if you have no access to recovery
Click to expand...
Click to collapse
thank you for answering , I solved it in other way .
first , I connected it to computer , and got Kindle fire utility running , I'v installed TWRP again - though it is installed perfectly - then my kindle fire reset and twrp boot appeared on screen , and then it went black again with the same problem .
installed it again , this time I pressed power during boot to enter recovery , then I flashed Glazed ICS , and now it it working .
I think I did something wrong with AOKP installation , I need to read the thread again to see what wrong I did

Huawei Fusion 2 CWM Install Step By Step Walkthrough

*****..:How to Install ClockWorkMod (CWM) on the Huawei Fusion 2:..*****
_________________________________________________________​
Step 1: Download the CWM Recovery Tools File from here! Huawei Fusion 2 CWM Installation Tools
Step 2: Put your Huawei Fusion 2 into fastboot mode. (remember from the walkthrough?)
(Step 2 Continued.. Turn off the phone, once off hold down volume down and the power button simultaneously for 20 SECONDS, you will then see the phone freeze at the AT&T logo.. GOOD this is fastboot!)
Step 3: Open up the CWM Recovery Tools File, and run the "instalador.bat" now plug in your phone, and wait for your computer to recognize it.
Step 4: Once the computer has recognized the phone in fastboot, and you have instalador.bat running, hit the spacebar. It should say something about sending the recovery image (in spanish sorry) if you get stuck on waiting device the computer hasn't recognized the phone. Unplug and replug, now instalador should run. If not the phone isn't in fastboot, so unplug the phone, and take out the battery and go back to step 2 to get into fastboot!
Step 5: Wait for the phone to reboot... Once it does turn it off! (we want to check that CWM is installed..)
Step 6: Now that the phone is off simply hold down the volume UP (not down as in fastboot procedure) while pressing the power button simultaneously, DO NOT STOP HOLDING POWER AND VOLUME UP UNTIL YOUR DEVICE ENTERS RECOVERY MODE!!! (you will know your in recovery mode because you will see a nice fancy top hat with some gears in the middle.. if you successfully installed CWM... if not you will see an android guy and some options like reboot phone, wipe data.. similar options are found in CWM but with much more possibilities of customization unlike the stock recovery... YAY! CWM!
****IF THIS POST HELPED YOU IN ANY WAY PLEASE SHARE BY HITTING THANKS, LIKE, and if you feel so generous DONATE! (if you want to buy me a beer that is)​
Works
It works. Got it installed with no problem.
Would post a link to the pic, but still blocked by the "new user" stuff.
If you post and thanks in all my threads on here youll get yourself further away from new member restrictions.
Sent from my GT-N8013 using Tapatalk HD
can you provide me the CWM for Huawei ascend y210d????
working great ..... thank you bro for helping usnow the time for custom rom i can't find a custom one to installi think gonna to learn cooking roms just to custom this fone lol:good:
nrzm said:
working great ..... thank you bro for helping usnow the time for custom rom i can't find a custom one to installi think gonna to learn cooking roms just to custom this fone lol:good:
Click to expand...
Click to collapse
We have a fairly stable cm7.2 not yet released and working on cm9. I'll let u know when cm7.2 is released!
Sent from my GT-N8013 using Tapatalk HD
How to install CWM on Fusion 2
Your post did not help me. When I tried installing CWM it say does not recognise program as internal and external command. I need help.
---------- Post added at 09:04 PM ---------- Previous post was at 08:52 PM ----------
I should also state that my phone is a U8665
dude when i connect my phone to the computer it does nothing
---------- Post added at 12:28 AM ---------- Previous post was at 12:18 AM ----------
i need help!!
tried this at least a half dozen times... Always fails and device is rooted. I can get instalador to erase and send, but when it goes to write the new recovery it fails with the following message (remote: flash write failure).
EDIT: forgot about the waiting for device part but still fails... >X(
EDIT 2: Never mind finally got it after like a bajillion times and a new user account on my computer
password
why is it asking for passwords

[Q&A] [RECOVERY]ClockworkMod Recovery v6.0.4.7

Q&A for [RECOVERY]ClockworkMod Recovery v6.0.4.7
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
same here
mbwambo said:
heloo ,,,,,, i have a problem with my htc desire816 dual sim, after installng custom recovery fail to work and my phone wrote tampered above unlocked line and fail to show custom recovery help plz.............
Click to expand...
Click to collapse
Hello Bro,
Here i 've the same issue and awaiting for solution. Do you have any update ?
I'll share if i found anything.
you can have some idea on below link and ": ADVANCED BOOT PROBLEMS"
http://forum.xda-developers.com/showthread.php?t=1275632
But, i haven't tried...it's quiet fear about to have try (becuase they mentioned it's a worst situation and the link is not exactly for Desire 816 model).
Thanks in Advance, SR
Sivasr said:
Hello Bro,
Here i 've the same issue and awaiting for solution. Do you have any update ?
I'll share if i found anything.
you can have some idea on below link and ": ADVANCED BOOT PROBLEMS"
http://forum.xda-developers.com/showthread.php?t=1275632
But, i haven't tried...it's quiet fear about to have try (becuase they mentioned it's a worst situation and the link is not exactly for Desire 816 model).
Thanks in Advance, SR
Click to expand...
Click to collapse
hey bro
now i solve the problem to my own ........................what about you you still have the same issue
how ?
how did u solve this problem ?
mbwambo said:
hey bro
now i solve the problem to my own ........................what about you you still have the same issue
Click to expand...
Click to collapse
Really!!!!!!!!.....It's nice to know you geeting out from hectic. Would you plz explain step by step process...it would help many guys to get relieve from the issue...
Eagerly waiting for your response.. plz help us
---------- Post added at 02:41 AM ---------- Previous post was at 02:02 AM ----------
mbwambo said:
hey bro
now i solve the problem to my own ........................what about you you still have the same issue
Click to expand...
Click to collapse
Yes brother, i have still same issue
Did you all try to use the .exe or did you use the fastboot command to flash this? If this does not work for you go to the CM thread, download that recovery file and use the same fastboot command in this thread. When you download the CM clockworkmod rename it to what the command says so it should be recovery_en.img
Sent from my 710C using XDA Free mobile app
I solved the problem by flashing via command not use exe thing........
So just use recovery.img ...hope will work ......
---------- Post added at 09:59 PM ---------- Previous post was at 09:41 PM ----------
But bad enough now i have other problem after flashing recovery.img .....my phone write ...TAMPERED......above unlocked...line..
Then doesnt show bettery sign....while am charging and my phone is off...also write some words in red colour that no permission to write this and so on those comes while my phone is charching or during restarting ...and going into recovery mode...
Anyone can help me...?????
mbwambo said:
I solved the problem by flashing via command not use exe thing........
So just use recovery.img ...hope will work ......
---------- Post added at 09:59 PM ---------- Previous post was at 09:41 PM ----------
But bad enough now i have other problem after flashing recovery.img .....my phone write ...TAMPERED......above unlocked...line..
Then doesnt show bettery sign....while am charging and my phone is off...also write some words in red colour that no permission to write this and so on those comes while my phone is charching or during restarting ...and going into recovery mode...
Anyone can help me...?????
Click to expand...
Click to collapse
Everyone experiencing the no recovery or the exclamation mark on the recovery screen its because you tried to run the .exe or flash the recovery with a fastboot command WHILE IN HBOOT MODE. You need to be in fastboot to do this and your device bootloader has to be unlocked before you try anything root wise.
Mine does the same thing. When it enters recovery just hit reboot device and let it start up. It charges in 2-3 hours on or off as long as the screen isn't active.
Also, ANY device that you unlock the bootloader for will say Tampered. Its HTC's way of knowing if you unlocked the device, but that doesn't mean you can't return it. It is done through HTC though and you are allowed to relock it to return it.
If your device power button stops working HTC will take it back regardless of bootloader status as that's a hardware problem. If your phone is not charging properly that isn't a bootloader problem that is the software of Android and is valid for a claim.
If you try to flash an entirely different bootloader then they'll reject your device because you went further then to just "Tamper".
If it voided warranty to unlock the bootloader there would be no root apps on the Playstore allowed.
Sent from my 710C using XDA Free mobile app
@jaysoblitzed
Does yours shows those words in read colour that you dont have permission and so on...????
mbwambo said:
@jaysoblitzed
Does yours shows those words in read colour that you dont have permission and so on...????
Click to expand...
Click to collapse
Yes it does say the exact same thing but the message actually states:
This build is for development purposes only.
Do not distribute outside of HTC without HTC's permission.
Failure to comply may lead to legal action.
No worries though, this message is automatically put there by HTC after unlocking the bootloader. :laugh:
@jaysobitzed
Yes.....that is the message i was talking about.......but to my side its coming even in charging mode while my phone iz off.......then directly goes into CWM mode...How about yours ??
mbwambo said:
@jaysobitzed
Yes.....that is the message i was talking about.......but to my side its coming even in charging mode while my phone iz off.......then directly goes into CWM mode...How about yours ??
Click to expand...
Click to collapse
@mbwambo Yep, mine does the same thing :good: :good:
---------- Post added at 08:41 AM ---------- Previous post was at 08:36 AM ----------
[NEW UPDATE]:
IF YOU RECEIVE AN EXCLAMATION MARK ON THE RECOVERY SCREEN AFTER RUNNING THE .EXE THEN IT IS BECAUSE YOU NEED TO FLASH AN OLDER CLOCKWORKMOD FIRST!
POWER OFF YOUR DEVICE BY HOLDING VOLUME UP + POWER BUTTON FOR 15 SECONDS IF YOUR STUCK AND THEN POWER ON BY HOLDING VOLUME DOWN+POWER BUTTON AND YOU'LL GO BACK INTO THE BOOTLOADER.
ONCE YOUR DEVICE IS SET IN FASTBOOT USB MODE DOWNLOAD THIS FILE BELOW:
https://s.basketbuild.com/dl/devs?dl=Grarak/recovery.img
NOW SAVE THAT FILE WHERE THE ADB FOLDER / PLATFORM-TOOLS IS THAT YOU INSTALLED AT THE BEGINNING OF THE VIDEO IN (Local Disk C:/adb)
ONCE THAT'S COMPLETE GO INTO THAT FOLDER AND RIGHT-CLICK IN ANY WHITE AREA OF THE FOLDER AND PRESS "RUN COMMAND LINE HERE" & RUN THE FOLLOWING COMMAND:
fastboot flash recovery recovery.img
REBOOT TO RECOVERY AND CONFIRM!
NOW YOU CAN RUN THE .EXE IN FASTBOOT USB MODE AGAIN OR FLASH THE RECOVERY HERE FOR THE LATEST VERSION!
Done!
mbwambo said:
I solved the problem by flashing via command not use exe thing........
So just use recovery.img ...hope will work ......
---------- Post added at 09:59 PM ---------- Previous post was at 09:41 PM ----------
But bad enough now i have other problem after flashing recovery.img .....my phone write ...TAMPERED......above unlocked...line..
Then doesnt show bettery sign....while am charging and my phone is off...also write some words in red colour that no permission to write this and so on those comes while my phone is charching or during restarting ...and going into recovery mode...
Anyone can help me...?????
Click to expand...
Click to collapse
Hi mbwambo, I'm not sre aboput problem you face that "Bettery sign missing and power of ur phone "..but as you told, (it's n going to Recovery mode Or Hboot) You can able the fast boot option under settings > Power . then sytem will go automaticall into normal start up instead of going into recovery or Hboot mode. i had the same problem what you have. after checked in the fast boot it's simply restarts as usual in charging or not charging status. hope this would help ur restarting issue.
I've the same tampered, but still not enter into recovery mode....u r lucky at this case...now you root ur mobile
Thnx, SR
Sivasr said:
Hi mbwambo, I'm not sre aboput problem you face that "Bettery sign missing and power of ur phone "..but as you told, (it's n going to Recovery mode Or Hboot) You can disable the fast boot option under settings > Power . then sytem will go automaticall into normal start up instead of going into recovery or Hboot mode. i had the same problem what you have. after checked in the fast boot it's simply restarts as usual in charging or not charging status. hope this would help ur restarting issue.
I've the same tampered, but still not enter into recovery mode....u r lucky at this case...now you root ur mobile
Thnx, SR
Click to expand...
Click to collapse
Thanks Sivasr!
@mbwambo:
By going into your settings and checking fastboot it will stop the device from booting into recovery if put to charge when powered off. This will show the battery icon and no red text will appear.
@Sivasr:
Try the method I just posted it will work to get into the recovery. I have had some people ask me about that same issue and that solution has worked for them. Also, make sure to uncheck fastboot in Power - Settings!
13330
jaysoblitzed said:
Thanks Sivasr!
@mbwambo:
By going into your settings and checking fastboot it will stop the device from booting into recovery if put to charge when powered off. This will show the battery icon and no red text will appear.
@Sivasr:
Try the method I just posted it will work to get into the recovery. I have had some people ask me about that same issue and that solution has worked for them. Also, make sure to uncheck fastboot in Power - Settings!
Click to expand...
Click to collapse
thanks again.....but too sad, i had relocked my phone after all tries are done. this evening i tried again to unlock it's not unlocking my phone only sticks with "Unlock Bootloader? " screen and it's says entering Rocovery... very long time. I don't think i can do unlock my phone again. i know iwe could not flash the recovery.img without unlock booloader....:crying::crying::crying::crying::crying::crying:
Sivasr said:
thanks again.....but too sad, i had relocked my phone after all tries are done. this evening i tried again to unlock it's not unlocking my phone only sticks with "Unlock Bootloader? " screen and it's says entering Rocovery... very long time. I don't think i can do unlock my phone again. i know iwe could not flash the recovery.img without unlock booloader....:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
@Sivasr
To unlock it again just use the same unlock.bin file you got in the email. Then use the recovery.img file I listed or go to the CM11 thread and download the recovery from there and use that one.
After you flash that old version you can go into it from the bootloader. Just go to advanced in the recovery, reboot to bootloader, and flash the new recovery with the .exe or with the recovery file from the CWM thread.
Done
You can't flash the recovery if it's still locked you are correct. If it seems frozen use the volume keys to navigate and power button to select.
Sent from my 710C using XDA Free mobile app
bricked phone
hi all
My htc desire 816 dual sim got hard bricked after flashing rom
Please help
:crying:
abdealli dalal said:
hi all
My htc desire 816 dual sim got hard bricked after flashing rom
Please help
:crying:
Click to expand...
Click to collapse
Hard bricked? There is no help for you.
CWM auto boot
Hi there.
Can anybody explain me, why my 816w (CWM v6.04.7) when I put it on charger after total battery discharge, turns on automatically and boots in recovery
Thank you in advance!
FoxyDrew said:
Hard bricked? There is no help for you.
Click to expand...
Click to collapse
What ROM did you flash? Does your device still turn on? Can you access the bootloader and/or recovery?
Sent from my 710C using XDA Free mobile app
---------- Post added at 08:14 PM ---------- Previous post was at 08:12 PM ----------
bunkker said:
Hi there.
Can anybody explain me, why my 816w (CWM v6.04.7) when I put it on charger after total battery discharge, turns on automatically and boots in recovery
Thank you in advance!
Click to expand...
Click to collapse
This is a glitch with the old CWM recovery. If you use the one from the CM12 thread; 6.0.5.1 CWM then you will be able to avoid this issue. Only thing is instead of it booting into recovery it won't boot unless you remove it from the power source. Lol so you win some you lose some.
Sent from my 710C using XDA Free mobile app

TWRP 3.1.1-0

TWRP for U Play
WARNING: SOME USERS ARE EXPERIENCING BOOTLOOP AFTER OTA UPDATING WITH TWRP.
DO NOT FLASH THIS RECOVERY INSTEAD USE FOR TEMPORARY BOOT IF YOU WANT OTA UPDATE
For direct booting without installation use
"fastboot boot twrp-3.1.1-0-alpine.img" in the bootloader menu (white screen )
If you want permanent installation follow these steps
NOTE: Please Check the partition table for your model and flash recovery to that block,
using wrong block can brick your device
use this command in terminal emulator or adb to check partition table
Code:
cat proc/emmc
for me its mmcblk0p39
Boot twrp from bootloader
Code:
fastboot boot twrp-3.1.1-0-alpine.img
now that your booted into twrp open adb and use these commands
Push Recovery Image to phone
Code:
adb push twrp-3.1.1-0-alpine.img /data/local/tmp
Set permission for recovery image
Code:
adb shell chmod 777 /data/local/tmp/twrp-3.1.1-0-alpine.img
Backup Current Recovery Image (in case you want to go back or failed)
Code:
adb shell dd if=/dev/block/mmcblk0p39 of=/sdcard/backup.img
Copy recovery to block
Code:
adb shell dd if=/data/local/tmp/twrp-3.1.1-0-alpine.img of=/dev/block/mmcblk0p39
Download
Source
Github
Can someone of devs create roms for our htc u play??
dranzer006 said:
TWRP for U Play
Click to expand...
Click to collapse
Has this been tested? I tried another twrp recovery and it's left my phone in a bootloop after trying to do a system update
Dutty106 said:
Has this been tested? I tried another twrp recovery and it's left my phone in a bootloop after trying to do a system update
Click to expand...
Click to collapse
yes i have used it however you need to have s off to install it. Else you can just boot it temporary ( fastboot boot )
OTA updates might crash the system
dranzer006 said:
yes i have used it however you need to have s off to install it. Else you can just boot it temporary ( fastboot boot )
OTA updates might crash the system
Click to expand...
Click to collapse
Thanks for that, how do you recover after OTA crashes the system? I wish I'd known, I'm trying to see if I leave it off for about 72 hours if it will switch back on as advised in another forum. How do you get S-OFF on HTC U Play? I've only managed to unlock bootloader
Dutty106 said:
Thanks for that, how do you recover after OTA crashes the system? I wish I'd known, I'm trying to see if I leave it off for about 72 hours if it will switch back on as advised in another forum. How do you get S-OFF on HTC U Play? I've only managed to unlock bootloader
Click to expand...
Click to collapse
try connecting the phone to pc and see if adb/fastboot reboot commands work Also try holding power key for 10-15secs.
you will have to flash stock rom zip back to get OTAs
For now there isn't any s off available
htc u play
installing twrp on installing twrp then black scren and vibrates around.can you help me please thanx
dranzer006 said:
try connecting the phone to pc and see if adb/fastboot reboot commands work Also try holding power key for 10-15secs.
you will have to flash stock rom zip back to get OTAs
For now there isn't any s off available
Click to expand...
Click to collapse
I've tried all of that I'm afraid as soon as it gets a bit of power the cycle happens and the PC doesn't have time to recognize the device before it reboots, it doesn't respond to the power key or any combination of key pressing, just keeps on in the boot loop. From what I've learned I'm assuming the problem is that 52MB TWRP image, it doesn't work on this phone, the update will be trying to boot the phone into recovery but because the recovery doesn't work it creates a bootloop..so far it's been 48hrs, will try switch it back on on monday as suggested here https://forum.xda-developers.com/an...g-failures-t3596427/post74189767#post74189767 . In the meantime we need to spread the word and shame whoever uploaded that TWRP image, evil!!!
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
martinsimir said:
installing twrp on installing twrp then black scren and vibrates around.can you help me please thanx
Click to expand...
Click to collapse
You're another victim of this TWRP image, sorry mate. Check this out..https://forum.xda-developers.com/an...g-failures-t3596427/post74189767#post74189767
Dutty106 said:
I've tried all of that I'm afraid as soon as it gets a bit of power the cycle happens and the PC doesn't have time to recognize the device before it reboots, it doesn't respond to the power key or any combination of key pressing, just keeps on in the boot loop. From what I've learned I'm assuming the problem is that 52MB TWRP image, it doesn't work on this phone, the update will be trying to boot the phone into recovery but because the recovery doesn't work it creates a bootloop..so far it's been 48hrs, will try switch it back on on monday as suggested here https://forum.xda-developers.com/an...g-failures-t3596427/post74189767#post74189767 . In the meantime we need to spread the word and shame whoever uploaded that TWRP image, evil!!!
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
You're another victim of this TWRP image, sorry mate. Check this out..https://forum.xda-developers.com/an...g-failures-t3596427/post74189767#post74189767
Click to expand...
Click to collapse
52mb ???? the image i have posted is around 14mb only.
if your able to restart the device then press the volume down key while booting (you will feel the vibration )
Brick htc u play
I know what i did. I just wanted to know what happened to the phone.thank you for your help, even if it's going to happen, so there's nothing going on, on Monday comes a new htc at play.people are learning mistakes.
---------- Post added at 07:11 PM ---------- Previous post was at 06:27 PM ----------
dranzer006 said:
52mb ???? the image i have posted is around 14mb only.
if your able to restart the device then press the volume down key while booting (you will feel the vibration )
Click to expand...
Click to collapse
black screen and vibrating all the time .can not even connect to the PC
martinsimir said:
I know what i did. I just wanted to know what happened to the phone.thank you for your help, even if it's going to happen, so there's nothing going on, on Monday comes a new htc at play.people are learning mistakes.
---------- Post added at 07:11 PM ---------- Previous post was at 06:27 PM ----------
black screen and vibrating all the time .can not even connect to the PC
Click to expand...
Click to collapse
I won't recommend you this but you can try pulling off the back panel and removing the battery cable (its the black one)
https://www.youtube.com/watch?v=KcNNGpsn7JY
dranzer006 said:
52mb ???? the image i have posted is around 14mb only.
if your able to restart the device then press the volume down key while booting (you will feel the vibration )
Click to expand...
Click to collapse
i feel vibration but black screnn
---------- Post added at 09:50 PM ---------- Previous post was at 09:46 PM ----------
dranzer006 said:
I won't recommend you this but you can try pulling off the back panel and removing the battery cable (its the black one)
https://www.youtube.com/watch?v=KcNNGpsn7JY
Click to expand...
Click to collapse
thanx mate on Monday I will see a new htc at play.but am try this
I dismantled it, but it does not help the same problem again black screen and vibrating .I put it in the garbage can
dranzer006 said:
52mb ???? the image i have posted is around 14mb only.
if your able to restart the device then press the volume down key while booting (you will feel the vibration )
Click to expand...
Click to collapse
Hi, I'm refering to this one "twrp-3.0.3-1_UNOFFICIAL-U Play.img" Not yours.. I flashed twrp-3.0.3-1_UNOFFICIAL-U Play.img and I'm now stuck and panicking, I hope I can have me phone back again .. The device tries to reboot itself into recovery repeatedly after you try a system update, no combination of button pressing etc works, the PC doesn't even have time to pick up the phone..Like I've said in previous posts, I'm trying to see if I leave it off for some days and then recharge and try to switch it back on if it will work..So far that's the only solution I've seen from anyone.. I hope this clears up my problem and suggestions..
Dutty106 said:
Hi, I'm refering to this one "twrp-3.0.3-1_UNOFFICIAL-U Play.img" Not yours.. I flashed twrp-3.0.3-1_UNOFFICIAL-U Play.img and I'm now stuck and panicking, I hope I can have me phone back again .. The device tries to reboot itself into recovery repeatedly after you try a system update, no combination of button pressing etc works, the PC doesn't even have time to pick up the phone..Like I've said in previous posts, I'm trying to see if I leave it off for some days and then recharge and try to switch it back on if it will work..So far that's the only solution I've seen from anyone.. I hope this clears up my problem and suggestions..
Click to expand...
Click to collapse
i am not sure what problem your having but if you try to press the volume up or down key while booting up you will boot into download mode. or else try pressing volume up and down both while the phone starts
Is there a possibility that comes out a working version.?
Dutty106 said:
Hi, I'm refering to this one "twrp-3.0.3-1_UNOFFICIAL-U Play.img" Not yours.. I flashed twrp-3.0.3-1_UNOFFICIAL-U Play.img and I'm now stuck and panicking, I hope I can have me phone back again .. The device tries to reboot itself into recovery repeatedly after you try a system update, no combination of button pressing etc works, the PC doesn't even have time to pick up the phone..Like I've said in previous posts, I'm trying to see if I leave it off for some days and then recharge and try to switch it back on if it will work..So far that's the only solution I've seen from anyone.. I hope this clears up my problem and suggestions..
Click to expand...
Click to collapse
Hi, did you have any luck? I'm stuck in the same boot loop.. I even took off the case and removed the black battery cable over night but still same boot loop, did running down battery help?
Hi, don't dismantle it or any of that other stuff suggested above, let it bootloop til the battery is flat, leave it, do not charge it or do anything to it for 11+ days, then charge it and it will switch back on, no problem, you'll have your phone back.
Ok thanks, it's been about 5 days off so far from dying from the boot loop, I'll give it another 10 days before charging it and see how it goes..
Thanks again for your response..
online4yourmind said:
Ok thanks, it's been about 5 days off so far from dying from the boot loop, I'll give it another 10 days before charging it and see how it goes..
Thanks again for your response..
Click to expand...
Click to collapse
No problem :good: it will definitely work

Categories

Resources