Home Button not working - OnePlus 3 Questions & Answers

I have flash 3.2.6 but i am back to my cm backup and the home button not working now. I have make reboot but not help.
Here the fix for the home button problem:
https://www.androidfilehost.com/?fid=24727376692773447

Schrotty35 said:
I have flash 3.2.6 but i am back to my cm backup and the home button not working now. I have make reboot but not help.
Click to expand...
Click to collapse
Did u also revert your kernel (boot.img) after going back to CM?
Dirty flash your CM rom to get a proper kernel for CM,
Or try to flash boeffla cm kernel, or blu_sp*rk custom rom kernel

Schrotty35 said:
I have flash 3.2.6 but i am back to my cm backup and the home button not working now. I have make reboot but not help.
Click to expand...
Click to collapse
I had this same problem. I was off my able to get the home button back by clean flashing stock Oxygen 3.2.4 The home button doesn't work in any of my backups now.

I have solved the problem. I have flash a other Radio from 3.2.2 and now the Home Button is working. See post 1 for download.

Thanks man for the solution really helpful.

Good fix, saved me from some headaches.. But with the new gApps, the 3.2.2 radio restarts the phone on making a phone call, so the best solution as of now is installing 3.2.4 and then custom rom... gets best of both worlds.

Hoooo Man !!! You saved me.
I spend all my day to found THE solution. ( I tried too much troubleshooting steps ... )
I wondered if there was hardware or software ... after many many image restoration ... fingerprint worked with the last recovery ( Orion Rom )
--> I downgraded the radio and Working !!!!
Thanks a lot.
Have a nice day

i found the right solution, just install the newest update and all is working again

Related

Custom Rom Problem

Everytime I install a 4.4.2 ROM it works fine until I power-off completely. When I turn it back on the microphone and speakers stop working.
I can restart the phone and reboot to recovery and everything is fine.
Of course my phone is a d2att. I only seem to get it working again is when I restore a Nandroid backup of the stock ROM then reinstall the custom ROM.
Can someone tell me a permanent way to solve this problem so I can power off with my custom ROM?
diando said:
Everytime I install a 4.4.2 ROM it works fine until I power-off completely. When I turn it back on the microphone and speakers stop working.
I can restart the phone and reboot to recovery and everything is fine.
Of course my phone is a d2att. I only seem to get it working again is when I restore a Nandroid backup of the stock ROM then reinstall the custom ROM.
Can someone tell me a permanent way to solve this problem so I can power off with my custom ROM?
Click to expand...
Click to collapse
You really haven't given any information that would help to diagnose your issues. Without information it's pretty much impossible to help you.
1.) What ROM?
2.) Fully wipe?
3.) Have you made any modifications that could conflict?
4.) Ect...
task650 said:
You really haven't given any information that would help to diagnose your issues. Without information it's pretty much impossible to help you.
1.) What ROM?
2.) Fully wipe?
3.) Have you made any modifications that could conflict?
4.) Ect...
Click to expand...
Click to collapse
I've installed Validus, C-ROM, CM11, AOKP.
None of them seem to have sound working on restart. I've tried re-flashing 4.1.1 stock via Odin then reinstall those ROMs but it never seem to work. Still have that problem after it is turned off.
I've fully wiped the phone clean every time.
Sound on the stock ROM works fine.
Not really sure what to tell you as you seem to be one of the only users posting this type of issue as far as I can see. Maybe someone that has the same issue will chime in here.
task650 said:
Not really sure what to tell you as you seem to be one of the only users posting this type of issue as far as I can see. Maybe someone that has the same issue will chime in here.
Click to expand...
Click to collapse
Also other notes
Using the Google Experience Launcher when I use the hotword "OK Google" the beep sound is scratchy.
Made another discovery, @task650, I flashed the stock recovery while running C-ROM and wiped the cache and it restored sound every time - though wiping the cache in CWM did nothing. I'm going to try TWRP now.
EDIT
--
TWRP wipe doesn't work but it does seems like there's a problem with how the cache works on my phone. Hopefully 4.4.3 based roms won't have the same issues but I will stick to stock recovery for now.
Is there any way to get a CWM flashable zip of the stock recovery or nandroid file?

[PROBLEM][SOLVED!] CWM, TWRP and LEWA Recoveries not booting into system

I've been working around with my device. And created a custom ROM a while back. So I finally decided to test it and here's when the problem occured:
I was on v11 something, when I flashed CWM 6.0.28 and tested it. It booted alright, wiped things and then when I chose the option, reboot into system, it did so without any problems. Then I upgraded to v1.1.2.2 and reflashed CWM but this time the 6.0.48 version. It worked fine too. But then, when I chose to reboot into system, the screen froze. I had no choice but to pull out the battery and reboot it.
I tried and flashed Lewa Recovery as well as TWRP Recovery. Same thing happens. As soon as I choose Reboot--> System, the screen freezes.
I was hoping any of the professional devs look into this and find a cause,
FYI I'm on Null Kernel for 4.1.2, running Stock ROM with G-Apps.
Any help would be appreciated!
SOLUTION! :
Download the recovery in the attachments. It's Lewa Recovery. Flash it. It works like any other recovery.
Flash zips, create backups and when you are done, Just Click on Reboot. But DO NOT click on system. Instead choose Download. You will boot right back into system.
So no more pulling out covers. Cause it can seriously lose the cover. Enjoy devs.
all custom recovery currently got problem with freezing when choosing to reboot into system, reboot recovery or poweroff.
its a bug in the recoveries.
mdfzhi said:
all custom recovery currently got problem with freezing when choosing to reboot into system, reboot recovery or poweroff.
its a bug in the recoveries.
Click to expand...
Click to collapse
Then how do we get past it? Is there a way to reboot into system without having to pull out the battery? How do you guys do it?
no other way except pulling out battery.
mdfzhi said:
no other way except pulling out battery.
Click to expand...
Click to collapse
So, shouldn't you guys work on fixing these issues in the recovery? I'm afraid the back cover of my Nokia X would become loose.
yes someone should look into but its not going to be me. whole cm repo is too much for my slow internet speed to sync.
mdfzhi said:
yes someone should look into but its not going to be me. whole cm repo is too much for my slow internet speed to sync.
Click to expand...
Click to collapse
Man, why not you start cm11 for us?
mdfzhi said:
yes someone should look into but its not going to be me. whole cm repo is too much for my slow internet speed to sync.
Click to expand...
Click to collapse
Yo! I found the solution. Check out the thread again.
Dom3616 said:
Yo! I found the solution. Check out the thread again.
Click to expand...
Click to collapse
dont understand
sumondhk1 said:
dont understand
Click to expand...
Click to collapse
See again.
Dom3616 said:
See again.
Click to expand...
Click to collapse
Thanks for thr solution but I am already using it and it is much better than others.
When I press reboot system, it takes sometime but after all it boots.
Now gonna try your method.
Lewa recovery can't mount usb storage. At least for me it can't.
mdfzhi said:
Lewa recovery can't mount usb storage. At least for me it can't.
Click to expand...
Click to collapse
Yes, but I copy the files before I boot the recovery.
I Would never Suggest Lewa For anyone ! It is smooth...cool .... good
But you will get bored of those frogs instead of smilies...
I Really Hated the Lewa Recovery too...
Made my Dead...In SERVICE Center gonna get it back on 13th...i'll sell it to buy XL
I Will never install Lewa on it...I Will do install TWRP On it...And thn flash dhacker29's AOSP Rom...(Altough i love S5 Minirom...but i've heard buttons and camcorder doesn't work on it...It completely Works on X....Just gonna wait Hope he fix it before 13th )
Dom3616 said:
See again.
Click to expand...
Click to collapse
i don't have any problem about booting to system with my nokia XL
Dom3616 said:
I've been working around with my device. And created a custom ROM a while back. So I finally decided to test it and here's when the problem occured:
I was on v11 something, when I flashed CWM 6.0.28 and tested it. It booted alright, wiped things and then when I chose the option, reboot into system, it did so without any problems. Then I upgraded to v1.1.2.2 and reflashed CWM but this time the 6.0.48 version. It worked fine too. But then, when I chose to reboot into system, the screen froze. I had no choice but to pull out the battery and reboot it.
I tried and flashed Lewa Recovery as well as TWRP Recovery. Same thing happens. As soon as I choose Reboot--> System, the screen freezes.
I was hoping any of the professional devs look into this and find a cause,
FYI I'm on Null Kernel for 4.1.2, running Stock ROM with G-Apps.
Any help would be appreciated!
Click to expand...
Click to collapse
I was also facing this problem. but now I am doing one thing,after flashed all I need,I clear the dalvik cache.Then click the reboot and its rebooted the system smoothly.No freez screen.Hope it will help others..
I am using CWM 6.0.28 recovery and stock rom.

KitKat flashes fine, won't survive a soft reboot

I wiped the dust off my old S2 in hopes to get it running again. The last ROM I had on it was Jedi Mind Trick JB 4. I flashed sultanxda's CM11 ROM and it booted up fine(logged into google, installed some apps). I did a soft reboot and the phone never wanted to boot back up. It flashed the Samsung logo and then just sat at a black screen. I flashed CM11 again just to make sure it didn't get corrupted the first time, but it still did not want to come up after a reboot. Then I thought maybe it's the ROM/ZIP so I flashed ParanoidAndroid 4.6-beta5. Same issue, it boots up fine after the flash, but will not start up after a reboot.
I'm on CWM Recovery 6.0.2.7, and I wipe/format the usual before the flash. Also on radio UVMC6. Any ideas?
I'm having the same problem, did you find a fix ?
Rushaan™ said:
I'm having the same problem, did you find a fix ?
Click to expand...
Click to collapse
same issue, different roms .
You. Guys are using an out of date recovery. Get the newest version of twrp and you should. Be fine.
CWM: http://www.teamchopsticks.org/p/cm110-release-notes.html
TWRP: http://forum.xda-developers.com/showthread.php?t=1768742

Home button/fingerprint reader stopped working

I tried to flash freedom OS but wifi didnt work,so i flashed stock back and now everything works,except the home button/fingerprint reader. I guess i have to go back to the stock kernel as well,but how do i do that?
1. Backup, Wipe everything except Internal Storage.
2. Flash the latest firmware (3.2.6) (Search on xda)
3. Flash FreedomOS1.5 and select stock kernel, it'll encrypt if you are decrypted before)
Hope i helped
I have exactly the same problem. After trying Freedom OS I restore Resurrection Remix from backup and lost home button/fingerprint. Also fingerprint setup option disappear from the settings menu.
Can anyone please help
kozianozdra said:
I have exactly the same problem. After trying Freedom OS I restore Resurrection Remix from backup and lost home button/fingerprint. Also fingerprint setup option disappear from the settings menu.
Can anyone please help
Click to expand...
Click to collapse
You just need to flash 3.2.4 firmware on RR
J_Dutch said:
You just need to flash 3.2.4 firmware on RR
Click to expand...
Click to collapse
yep, exactly. just do it
Thanks friend! Fingerprint working now

FingerPrint doesn't work(arter97 rom)

Hi guys, I switched from official cm 13 to arter97 rom + kernel, I did a fresh install, change my system/data/cache to f2fs, decrypt phone, and now everything is working except fingerprint sensor, it doesn't work as home button too, it does nothing, and in setting I can't find anything about fingerprint, it doesn't exist, could you pls help me?
Hello, there went something wrong with installing the firmware. I do recommend you to go back to 3.2.7 and then flash the rom you want again.
Demian3112 said:
Hello, there went something wrong with installing the firmware. I do recommend you to go back to 3.2.7 and then flash the rom you want again.
Click to expand...
Click to collapse
Tnx, i will test it soon
You don't need to install the whole firmware... You can download as a flasheable zip every modem+firware from this topic. Try to install the latest modem/firmwares. At the end of CM13, they merget the 3.2.6 specific changes, so you'll need at least 3.2.6 or 3.5.5-CE modem/firmware for CM13 as well
dh.harald said:
You don't need to install the whole firmware... You can download as a flasheable zip every modem+firware from this topic. Try to install the latest modem/firmwares. At the end of CM13, they merget the 3.2.6 specific changes, so you'll need at least 3.2.6 or 3.5.5-CE modem/firmware for CM13 as well
Click to expand...
Click to collapse
Tnx, you save my time and internet I flashed 3.2.7 firmware and fingerprint is back

Categories

Resources