Related
hello,
(with "this rom" i mean >sultan cm13<. I edited the title, before that it "was can't but sultan cm13", but now i know it doesnt boots any aosp roms)
a few days ago i used this rom as secondary with multirom (primary was freedom 1.10). now today, i wanted to use this rom as my dailydriver rom. i made the normal procedure, making a backup, then wiping the partitions (system, data, cache, dalvik) and after it flashing the rom. on the first try, i did it like i usually do, first the rom, then the gapps and then xposed. then i rebooted, and it was stuck on the 1+ logo screen about 10 mins. then i reflashed it, but just the cm.zip. then i still got stuck.
i tried it with the unofficial and the official twrp recovery. now i did a nandroid restore to the freedomos rom, and it boots normal.
please help me, i really want to use sultans cm13, i really like it!
i don't know why it doesn't work, i mean as a secondary it booted flawless..
btw i'm on the 3.2.7 firmware
(problem exists on all 6.0 aosp roms i tried. Please read further posts)
Did you follow the flashing instructions to the letter? If you did, you would have seen that the CM13 requires a one time flash of the OOS 3.2.6 firmware (linked in the thread).
Yeah sure but it did work with the 3.2.7 firmware on multirom, so i thought i dont have to do this. Well i will try this, and give you feedback then
Thanks
ReNeH99 said:
Yeah sure but it did work with the 3.2.7 firmware on multirom, so i thought i dont have to do this. Well i will try this, and give you feedback then
Thanks
Click to expand...
Click to collapse
BTW, which xposed version did you flash? If it was v86.x then that's the most likely culprit (since the latest patch, v87 works, v86.x causes bootloop).
i just flashed the 3.2.6 firmware, still does not work.
yes i used the v87 xposed, also the second try i only installed the cm.zip, without xposed and gapps, etc.
ReNeH99 said:
i just flashed the 3.2.6 firmware, still does not work.
yes i used the v87 xposed, also the second try i only installed the cm.zip, without xposed and gapps, etc.
Click to expand...
Click to collapse
Hmm... strange... TWRP doesn't give any errors either?
Hw4ng3r said:
Hmm... strange... TWRP doesn't give any errors either?
Click to expand...
Click to collapse
nope no errors, all the folders and build.prop, etc is in the /system folder too..
i also redownloaded the rom, md5 hash is right and it doesn't help either
May be a silly question but did you uninstall multirom?
Hw4ng3r said:
May be a silly question but did you uninstall multirom?
Click to expand...
Click to collapse
yep
i gonna try to flash RR 5.7.4, to see what happens then
edit: what i forgot to say, i also reinstalled multirom and the multirom recovery for another try. in the multirom menu the touch doesn't work then, and when the primary rom (cm13 sultan) boots after 5 secs, i just get a black screen, the phone isnt of, just a black screen, i have to press all 3 buttons for a reboot then.
edit2: RR also does not boot
edit3: lol i just reinstalled multirom and it boots as secondary rom. then i copied it to the primary slot, and *bling* it doesn't boot again... i dont get this...
Ok i tried it with multiple AOSP roms and it simply doesn't work. Strange thing is, they work as a secondary rom when i have multirom installed.
Does anybody have a solution for this maybe? I hope someone who knows about this problem can help me i don't want oos anymore i need aosp
Hello, i tried to OTA update my op3 from oficial CM13 nighly to oficial CM14 nighly and it did update.
but when i tried to enter TWRP recovery mode (i want to restore the backup because the new cm version has too many bugs) it wont open twrp, it stays in the op logo for some seconds and then a black screen appears and i have to restart my phone
i tried to reinstall twrp, intall stock recovery but nothing works, please help
If you had searched for your problem, you would have come across this: http://forum.xda-developers.com/oneplus-3/how-to/oos-3-5-2-comunity-build-t3461648/post68691560#post68691560. Reflash it in fastboot and it will work.
luigymarani said:
Hello, i tried to OTA update my op3 from oficial CM13 nighly to oficial CM14 nighly and it did update.
but when i tried to enter TWRP recovery mode (i want to restore the backup because the new cm version has too many bugs) it wont open twrp, it stays in the op logo for some seconds and then a black screen appears and i have to restart my phone
i tried to reinstall twrp, intall stock recovery but nothing works, please help
Click to expand...
Click to collapse
Are you running official TWRP? CM14.1 requires modified TWRP and I believe most people are using version 23 (Credits to @eng.stk) for CM14.1.
nitros12 said:
If you had searched for your problem, you would have come across this: http://forum.xda-developers.com/oneplus-3/how-to/oos-3-5-2-comunity-build-t3461648/post68691560#post68691560. Reflash it in fastboot and it will work.
Click to expand...
Click to collapse
Thanks a lot! it worked
Hw4ng3r said:
Are you running official TWRP? CM14.1 requires modified TWRP and I believe most people are using version 23 (Credits to @eng.stk) for CM14.1.
Click to expand...
Click to collapse
Oh I didnt know that, thank you
Thank you for both asking the question and answering the question. If I had seen this topic earlier I wouldn't have wasted 5 f*cking hours. Thank you!
CM13 nightly to CM14 nightly ruined everything for me. Never doing dirty flash again.
DamianSewo said:
Thank you for both asking the question and answering the question. If I had seen this topic earlier I wouldn't have wasted 5 f*cking hours. Thank you!
CM13 nightly to CM14 nightly ruined everything for me. Never doing dirty flash again.
Click to expand...
Click to collapse
This is quite funny (obviously not to you and no offense) and sad, but people that have been used CM14.1 for a while have said the same thing for about 2 months now: "people coming to CM14.1 from 13 are in for a mess"
This is quite funny (obviously not to you and no offense) and sad, but people that have been used CM14.1 for a while have said the same thing for about 2 months now: "people coming to CM14.1 from 13 are in for a mess"
Click to expand...
Click to collapse
No offense taken. This is just what happens if you venture using MODs with limited knowledge
But the misery of updating hasn't ended yet. So now I have access to TWRP, and I had done a TWRP nand backup before going to CM14, but I found out this was from the Boot, System, EFS and System Image, but NOT from the 'data'. When I restore everything I have I do get back into CM13, but nothing is working and it's rebooting all the time. Completely useless. I just checked and both my data and sd-card are intact. So I don't understand why I am not just getting back to the state I was before starting the CM14 misery. Is this because files on the 'data' got changed when doing the OTA CM14 nightly?
I also tried first restoring the image and then putting the CM13 nightly that I came from on top of it. Same ****. Also tried other way around, first CM13 nightly from TWRP, and then the image restore ('data' excluded since I didn't have that) on top of it. Also no luck.
Anyone an idea how to get back to my CM13?
By now I have wasted a full working day. I regret ever installing CM14, I just want to get back to the situation yesterday with a working CM13... :crying:
DamianSewo said:
No offense taken. This is just what happens if you venture using MODs with limited knowledge
But the misery of updating hasn't ended yet. So now I have access to TWRP, and I had done a TWRP nand backup before going to CM14, but I found out this was from the Boot, System, EFS and System Image, but NOT from the 'data'. When I restore everything I have I do get back into CM13, but nothing is working and it's rebooting all the time. Completely useless. I just checked and both my data and sd-card are intact. So I don't understand why I am not just getting back to the state I was before starting the CM14 misery. Is this because files on the 'data' got changed when doing the OTA CM14 nightly?
I also tried first restoring the image and then putting the CM13 nightly that I came from on top of it. Same ****. Also tried other way around, first CM13 nightly from TWRP, and then the image restore ('data' excluded since I didn't have that) on top of it. Also no luck.
Anyone an idea how to get back to my CM13?
By now I have wasted a full working day. I regret ever installing CM14, I just want to get back to the situation yesterday with a working CM13... :crying:
Click to expand...
Click to collapse
Exactly, when I got my TWRP working again I tried to restore my backup (cm13) but it happened like you said, wouldn't work.
I had to clean flash a new cm13 rom :/
luigymarani said:
Exactly, when I got my TWRP working again I tried to restore my backup (cm13) but it happened like you said, wouldn't work.
I had to clean flash a new cm13 rom :/
Click to expand...
Click to collapse
Why were you unable to use your backup to restore CM13? In my case I didn't have a backup of the data-partition, which I think is the problem. But if you have a complete backup you should be able to get it back right? Isn't that the whole purpose of doing a backup before you update the ROM?
DamianSewo said:
Why were you unable to use your backup to restore CM13? In my case I didn't have a backup of the data-partition, which I think is the problem. But if you have a complete backup you should be able to get it back right? Isn't that the whole purpose of doing a backup before you update the ROM?
Click to expand...
Click to collapse
It should have worked, but it didn't. I have no idea why, it was a complete backup and everything in it was working perfectly so idk
luigymarani said:
It should have worked, but it didn't. I have no idea why, it was a complete backup and everything in it was working perfectly so idk
Click to expand...
Click to collapse
Okay so if you restored a complete backup and still wasn't able to get back to a working CM13 then we probably have exactly the same issue.
It could also be related to the TWRP version we have installed now, maybe the new TWRP is not able to handle CM13. Anyone here to comment on this?
DamianSewo said:
Okay so if you restored a complete backup and still wasn't able to get back to a working CM13 then we probably have exactly the same issue.
It could also be related to the TWRP version we have installed now, maybe the new TWRP is not able to handle CM13. Anyone here to comment on this?
Click to expand...
Click to collapse
Which TWRP version are you using? I flashed the 3.0.2.1-v23 and it supports cm13, because o already flashed a new cm13 rom and I'm using TWRP normally.
luigymarani said:
Which TWRP version are you using? I flashed the 3.0.2.1-v23 and it supports cm13, because o already flashed a new cm13 rom and I'm using TWRP normally.
Click to expand...
Click to collapse
I'm also using 3.0.2.1-v23. Trying to find any information that could help me have my CM13 TWRP image working again, but no luck so far
I'm currently running my OP3 on Resurrection Remix 5.7.4 (MM 6.01), the phone has the latest version of TWRP and I've flashed other ROMs in the past without any issue
RR has proven to be quite unstable for me, the system UI keeps crashing, which renders the phone unusable until after a reboot so I wanted to flash Freedom OS as that worked quite well for me previously. When I tried to flash the ROM in TWRP the ROM seemed to flash successfully but when I rebooted, only the boot logo showed and then the screen went black and the phone refused to respond at all for about two hours, after that exactly the same thing happened. I managed to boot into recovery and tried flashing a different ROM but the result was the same every time, the only way to get the phone to work normally was to flash RR again/restore from a Nandroid backup, either way, the result is the same, I'm stuck on an unstable ROM and I don't know why, the last time I flashed these ROMs they worked fine, I followed all of the instructions for flashing said ROMs to the letter, I have the latest version of TWRP, etc.
Seems TWRP can't mount /system, in TWRP under "mount", system is unchecked, I checked it and tried again but found that whenever I rebooted the phone or attempted to flash a new ROM, it would always uncheck itself and flashing the ROM would fail, however strangely flashing the same version of RR was always successful. Does anyone know what the problem could be?
I would suggest you clean flash OOS first before going to Freedom.
I think RR is based on Lineage OS while Freedom is based on stock OOS.
Envoyé de mon iPhone en utilisant Tapatalk
Wrong forum.
danecr7 said:
I would suggest you clean flash OOS first before going to Freedom.
I think RR is based on Lineage OS while Freedom is based on stock OOS.
Envoyé de mon iPhone en utilisant Tapatalk
Click to expand...
Click to collapse
RR is based on CM. I'm just scared to flash OOS in case it goes wrong because stock OOS will overwrite TWRP with its stock recovery and then I'll be screwed because I'll have no way to restore from a backup if it goes wrong
RazorBlade123 said:
Wrong forum.
Click to expand...
Click to collapse
Yeah I thought it seemed a little out of place but I don't know where to post it? Is there a general questions forum?
evilkitty69 said:
RR is based on CM. I'm just scared to flash OOS in case it goes wrong because stock OOS will overwrite TWRP with its stock recovery and then I'll be screwed because I'll have no way to restore from a backup if it goes wrong
Click to expand...
Click to collapse
I don't think that there is a risk in flashing stock OOS. But if the custom recovery is overwritten then flash it back, your backup files are stored in your internal memory and unless you wipe it you are safe.
danecr7 said:
I don't think that there is a risk in flashing stock OOS. But if the custom recovery is overwritten then flash it back, your backup files are stored in your internal memory and unless you wipe it you are safe.
Click to expand...
Click to collapse
Even when I tried flashing other CM based ROMs, including ones I'd flashed before, it failed, only flashing RR actually worked. I don't know why this is the case but I'm not sure flashing OOS without knowing what the issue is, is the solution because if I lose TWRP there's no telling whether I'll be able to flash it back in fastboot if the phone isn't working properly
evilkitty69 said:
Even when I tried flashing other CM based ROMs, including ones I'd flashed before, it failed, only flashing RR actually worked. I don't know why this is the case but I'm not sure flashing OOS without knowing what the issue is, is the solution because if I lose TWRP there's no telling whether I'll be able to flash it back in fastboot if the phone isn't working properly
Click to expand...
Click to collapse
I once flashed RR based on android 7.1.1 and because I did not like it very much I wanted to go back to Freedom but at that time it was based on android 7.0.1 thus I was unable to boot. Maybe you are facing the same issue. But in my case I hardbricked my device and used the unbricking tool from OP3 forum.
If you download the latest OOS zip file you can flash it through TWRP and you won't lose you custom recovery.
danecr7 said:
I once flashed RR based on android 7.1.1 and because I did not like it very much I wanted to go back to Freedom but at that time it was based on android 7.0.1 thus I was unable to boot. Maybe you are facing the same issue. But in my case I hardbricked my device and used the unbricking tool from OP3 forum.
If you download the latest OOS zip file you can flash it through TWRP and you won't lose you custom recovery.
Click to expand...
Click to collapse
All of the ROMs I tried with were android 6.0.1, I'm avoiding touching android 7 because I'm not a fan
The strange thing is that in TWRP under "mount", system is unchecked and it won't stay checked when I reboot or try to flash something and then the flash fails. Strangely however, I can flash RR afresh and it will work but nothing else works
Therefore I don't think OOS would work either
I have been working on the sister models also. I saw no one was building these anymore so here it is I hope it can be enjoyed by all. Spread the word. provide feedback so other fans of this ROM may obtain it and work out any bugs if there are any. I will update once or twice a week depending on time and demand. I'm compiling for three different variants. Hit the thanks button and Enjoy. Dirty flash the updates not the initial flash of this rom but the updates to it. Initial install = Factory reset, wipe data and cache, install rom zip, install gapps zip, install su zip, reboot system. As of 9-3-18 i will be switching to Ubuntu 18.04 Bionic Beaver, that being said i do not know if i will have to change anything or do anything different to keep pushing these updates out but i will most definitely try to keep them coming.
4-10-18
https://www.androidfilehost.com/?fid=890129502657597436
4-13-18
https://www.androidfilehost.com/?fid=818070582850507491
4-17-18
https://www.androidfilehost.com/?fid=818070582850508419
4-24-18
https://www.androidfilehost.com/?fid=673956719939836620 If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
5-4-18
https://www.androidfilehost.com/?fid=818222786056028546
Root is not baked in. Flash and root your preferable way.
5-20-18
https://www.androidfilehost.com/?fid=674106145207488021
5-31-18
https://www.androidfilehost.com/?fid=674106145207490572
7-28-18
https://www.androidfilehost.com/?fid=5862345805528060741
9-3-18
https://www.androidfilehost.com/?fid=1322778262903996744
10-07-18
https://www.androidfilehost.com/?fid=1322778262904022369
12-7-18
https://www.androidfilehost.com/?fid=11410963190603868411
12-16-18
https://www.androidfilehost.com/?fid=11410963190603876081
2-25-19
https://www.androidfilehost.com/?fid=1395089523397901582
3-24-19
https://www.androidfilehost.com/?fid=1395089523397924752
5-6-19
http://download1589.mediafire.com/7...q5/lineage-14.1-20190507-UNOFFICIAL-d2tmo.zip
10-13-19
https://www.androidfilehost.com/?fid=1899786940962607809
i recommend clean flash as i built with different computer
setprop persist.lineage.nofool true in terminal emulator with root privs (type su first grant permission then setprop persist.lineage.nofool true) gets rid of persistant notification
Bluetooth dialtone when playing music fix
Settings > Battery > tap in 3-dot menu at top right tap on Battery optimisation. To show all apps and services here, select the ‘All apps’ options under the dropdown. Tap on both of the Bluetooth services and change them to Don't optimise.
thanks bro... but is it rooted rom or use any method to root it ?
hasan.sy said:
thanks bro... but is it rooted rom or use any method to root it ?
Click to expand...
Click to collapse
I use SuperSU zip
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
I appreciate the feedback and no worries mate I'm still trying to get the no sim bug worked out in the att variant no luck so far sprint variant is doing good also
Update posted 4-17-18
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Sammay_Boiii said:
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Click to expand...
Click to collapse
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Joker1716 said:
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Click to expand...
Click to collapse
Thank you for your rapid response! I will try that as soon as I get to my house and I'll let you know what happens
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Sammay_Boiii said:
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Click to expand...
Click to collapse
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
This should help
https://forum.xda-developers.com/showthread.php?t=1949687
Joker1716 said:
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
Click to expand...
Click to collapse
I will do that. Your rom needs to be flashed over stock rom?
Sammay_Boiii said:
I will do that. Your rom needs to be flashed over stock rom?
Click to expand...
Click to collapse
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Joker1716 said:
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Click to expand...
Click to collapse
What you said makes a lot of sense actually. Im used to just flashing back ups of other roms that I forgot how to flash fresh ones. I'm not used to this haha but I got it now. Stock rom 4.3 has been flashed via odin and the root method is currently on my screen.
hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Sammay_Boiii said:
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Click to expand...
Click to collapse
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
hasan.sy said:
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
Click to expand...
Click to collapse
Thank you. Ive been flashing this rom repeatedly and always received a "Process system not responding" then it falls into a boot loop
Update posted
Joker1716 said:
Update posted
Click to expand...
Click to collapse
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
hasan.sy said:
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
Click to expand...
Click to collapse
If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
Hello Guys,
I need help regarding the issue that I'm facing. What happens is ROM get installed properly without any error but not boots up. It get stuck at boot animation screen. I tried lots of ROMs including DOT OS, C droid, AICP, TOXYC OS. Facing the same issue to all of the ROMs. I followed the below steps to install.
1. Download the ROM file
2. Download the GApps.
3. Booted into TWRP Recovery Mode.
4. Backup done (optional)
5. Wipe all the 4 partitions except Internal Storage.
6. Then install the ROM file and followed by GApps
7. Installation successful for both ROM & GApps.
8. Reboot.
I tried installing the ROM only but result was same.
I'm currently running on Oxygen OS Open Beta 10.
PLEASE HELP. THANKS IN ADVANCE.
Which TWRP do you use? Personally, I recommend this one by codeworkx: https://sourceforge.net/projects/ch....1-0-20180309-codeworkx-dumpling.img/download
Some roms require you to be decrypted; others don't. Most roms require the latest firmware (5.1.3) to be flashed before the rom, gapps, etc. Read the installation instructions carefully. Use the recommended firmware and gapps package linked to the rom. Before you start flashing roms, you should wipe your phone in fastboot mode: fastboot format userdata. This will wipe your phone clean; all your data will be gone. So, backup all your data to your PC before proceeding. After format, reboot directly to TWRP and move your firmware, rom, gapps, etc. to internal storage; follow the flash order and procedures exactly as outlined for the rom you want to try.
I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.
KDPalekar said:
I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.
Click to expand...
Click to collapse
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.
Did you try to format data (after wiping the partitions) ?
bud7dha said:
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.
Click to expand...
Click to collapse
Read the whole instructions and installed it but no luck .
Zark0s said:
Did you try to format data (after wiping the partitions) ?
Click to expand...
Click to collapse
sorry.. i didn't get u.
KDPalekar said:
sorry.. i didn't get u.
Click to expand...
Click to collapse
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data and internal storage partitions and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.
Zark0s said:
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data partition and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.
Click to expand...
Click to collapse
so do i need to do that as well?
KDPalekar said:
so do i need to do that as well?
Click to expand...
Click to collapse
I format data everytime I do a clean flash lol, so yeah just give a try and let us know if it works ^^
Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.
KDPalekar said:
Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.
Click to expand...
Click to collapse
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556
Zark0s said:
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556
Click to expand...
Click to collapse
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.
KDPalekar said:
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.
Click to expand...
Click to collapse
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
I tried AOSP Extended before a week ago. Everything was working fine except headphone Jack. Sound was not coming in my earphones. Sound from speaker grill was coming, even I tried with connecting to Bluetooth speaker, that's also working fine. The only issue I had with that headphone Jack.
Please suggest if you have any solution for that then I'll surely try it again.
Thanks
Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?
KDPalekar said:
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?
Click to expand...
Click to collapse
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665
Zark0s said:
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665
Click to expand...
Click to collapse
Thanks a lot Buddy. Flashed the latest firmware and now headphone Jack is live more. Thank you do much Buddy.