I am very happy to use 3.2.4 but suddenly i flash 3.5.2 and flash twrp(may be this twrp only made for 3.5.2)
But when i restore my old 3.2.4 backup... my twrp gone and nothings comes??
but i rooted my phone via Toolkit2.5
so i want to back 3.2.4 ..
anyone give me a guide??
cz 3.5.2 twrp give me lots of pain.. full of bugs... after flash rom reboot not work .. and many more...
Nilshalok said:
I am very happy to use 3.2.4 but suddenly i flash 3.5.2 and flash twrp(may be this twrp only made for 3.5.2)
But when i restore my old 3.2.4 backup... my twrp gone and nothings comes??
but i rooted my phone via Toolkit2.5
so i want to back 3.2.4 ..
anyone give me a guide??
cz 3.5.2 twrp give me lots of pain.. full of bugs... after flash rom reboot not work .. and many more...
Click to expand...
Click to collapse
I'm not sure if this is considered the proper way to do it, but this is what i did to fix the same issue you had. I was previously on FreedomOS running 3.2.4, of which i had a nandroid backup of. Also, it should be noted that you'll need a working ADB setup on your desktop for this to work.
Download the following files to your computer:
TWRP 3.0.2-1 from the twrp website at: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
TWRP 3.0.2-19 (the one that supports flashing 3.5.2)
Stock OxygenOS 3.2.4 ROM from OnePlus at: http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.4/
Once you have all that downloaded, open a command prompt and go to whatever directory you have the TWRP images downloaded in. Reboot your phone into fastboot, and connect it to your computer. Run the following command to boot into TWRP:
fastboot boot (whatever the TWRP 3.0.2-19 version is named).img
This should boot you into TWRP recovery. Transfer the TWRP 3.0.2-1 image that you downloaded from the TWRP website to the phone as well as the stock OxygenOS 3.2.4 zip. Do a wipe of everything but the internal data, just like you would when doing a clean install of a ROM. Install the stock Oxygen OS 3.2.4 ROM. Immediately after that, flash the TWRP 3.0.2-1 image (you can do this in TWRP by going to Install-->install image, and then select the img file of the TWRP 3.0.2-1 img that you transferred earlier). This will flash the recovery. Reboot the phone and you should be able to go directly into the 3.0.2-1 recovery like normal. Inside there, restore your existing nandroid back, reboot.
Nilshalok said:
But when i restore my old 3.2.4 backup... my twrp gone and nothings comes??
but i rooted my phone via Toolkit2.5 so i want to back 3.2.4 ..
Click to expand...
Click to collapse
it is NOT WORKING - they are working on a fix for it hopefully soon
Related
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Well, probably its a problem with your boot.img partition. Extract boot.img from stock rom zip, then flash it via fastboot flash boot boot.img and then, flash orginal recovery same as boot. Then, finally, flash via recovery STOCK ROM. Probably now it will be fine.
If not, try flash TWRP and make FULL WIPE included system partition and repeat upper steps.
Cheers.
In twrp goto wipe and do normal wipe remember don't do advance wipe otherwise it'll format internal storage as well so avoid advance wipe only do normal wipe then install full 3.2.7 zip and super su. zip
Sent from my ONEPLUS A3003 using Tapatalk
Mahesh8348 said:
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Click to expand...
Click to collapse
before you flash 3.2.7 mount system read-only. you can do this under "mount"
it is a known bug with twrp and oxygenos
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
panther124 said:
before you flash 3.2.7 mount system read-only. you can do this under "mount"
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
Click to expand...
Click to collapse
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Mahesh8348 said:
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Click to expand...
Click to collapse
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
panther124 said:
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
Click to expand...
Click to collapse
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Mahesh8348 said:
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Click to expand...
Click to collapse
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
panther124 said:
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
Click to expand...
Click to collapse
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Mahesh8348 said:
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Click to expand...
Click to collapse
You should get it automatically
Hi everyone,
I've a little problem with my OP3, Yesterday I removed my OOS 3.2.6 with TWRP, I flashed the stock recovery back and then I've sideloaded the last OOS 3.5.3 Community Build. Today i'd like to flash the TWRP, i launched the Fastboot menu, nothing seems to go wrong by flashing but when i tried to boot into the recovery, the "1+ powered by android" appears for 5 sec and then a black screen, no TWRP screen... Same problem by trying to restore the OnePlus stock recovery..
I tried "fastboot -w" (wipe) this bring back the stock recovery.
I tried to sideload, OOS 3.5.3, OOS 3.5.3, ResurectionRemix 2.7.4 and CM14 but all of them failed at 47% of work...
I'm thinking that there is a problem caused by an encryption...
"fastboot format userdata" didn't solve the problem..
I'd like to know wich partition i can format/erase to remove this encryption (Loss of data is not a problem for me)
Thanks in advance
Have you tried to flash the modified TWRP ?
Dushaine said:
Have you tried to flash the modified TWRP ?
Click to expand...
Click to collapse
Yes, same problem as TWRP
Same thing happened to me on flashing twrp after sideloading CB 3.5.2 through stock recovery. But flashing the modified twrp 3.0.2-19 solved the issue.
It is newer firmware that won't let you boot into TWRP.
Flash modified TWRP 3.0.2-19 recovery through fast boot.
Then flash <=3.5.0 firmware from here using TWRP.
Then flash this TWRP 3.0.2-0 image again from fast boot.
Then flash a ROM of your liking.
If all else fails, you can try this (flash stock recovery and 3.2.4 FW) WITHOUT relocking and then flash TWRP 3.0.2-0 from the above link to see if that works.
AJay27 said:
Same thing happened to me on flashing twrp after sideloading CB 3.5.2 through stock recovery. But flashing the modified twrp 3.0.2-19 solved the issue.
Click to expand...
Click to collapse
kgs1992 said:
It is newer firmware that won't let you boot into TWRP.
Flash modified TWRP 3.0.2-19 recovery through fast boot.
Then flash 3.5.0 firmware from here using TWRP.
Then flash this TWRP 3.0.2-0 image again from fast boot.
Then flash a ROM of your liking.
If all else fails, you can try this (flash stock recovery and 3.2.4 FW) without relocking and then flash TWRP 3.0.2-0 from the above link to see if that works.
Click to expand...
Click to collapse
I've been able to Flash the Modified recovery, and it booted. By flashing the patch, no problem detected, but after flashing the 3.0.2-0 same black screen as earlier...
So I flashed the modified back, and by trying to flash ResurectionRemix for exemple, no error happenned but, when boot begin, same problem as twrp ...
EDIT : Sorry guys, i didn't read correctly.. I was flashing the same patch ! The 3.5.3 and not the 3.5.0 !!! Normal TWRP is booting corectly now, i'll see for ROM !
Thank you very much to you !!
EDIT 2 : RR 2.7.4 BOOT !!! Thank you so much !
Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready
GrayGhost93 said:
Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready
Click to expand...
Click to collapse
Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.
Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Sorry my English...
Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.
Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.
Click to expand...
Click to collapse
Did it, but same issue...
Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Click to expand...
Click to collapse
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.
Click to expand...
Click to collapse
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!
GrayGhost93 said:
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Click to expand...
Click to collapse
Download the official recovery here:
http://oneplusroms.s3.amazonaws.com...694615&Signature=1Momnxm8gHWw03D401Oof5YxnE4=
What is the exact output if you do
Code:
fastboot flash recovery recovery_OBT7.img
OOS4 is the stable release. I would strongly recommend it over cm right now. It's actually quite polished.
You can download the official full zip here:
http://otafsc.h2os.com/patch/amazon...en_16_OTA_035_all_1612310359_e10cadfb2af7.zip
GrayGhost93 said:
Did it, but same issue...
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!
Click to expand...
Click to collapse
Flash TWRP 3.0.2-22 (download available in other questions. Wait a bit will link it.
Edit: https://forum.xda-developers.com/attachment.php?attachmentid=3971072&d=1481920669 )
See if you can boot into recovery. If you can. Flash whatever rom you have or nandroid backup.
Also are you sure you're using the correct modem and firmware version? Download those recommended in the rom you're using and flash those along with the rom.
http://forum.xda-developers.com/one...dem-collection-flashable-zips-t3468628/page23
Recently I couldn't boot after flashing different firmware, same with different rom without its firmware and modem.
I haven't had any software update for about 1.5 months. I was on Resurrect Remix ROM Nougat, firmware 3.2.6, and on TWRP 3.0.1 (or 3.0.0 I'm not too sure). Today I tried updating. Things went wrong. Here are my steps:
1. Wiped everything except internal storage.
2. Updated recovery to twrp-3.0.2-1.28 within recovery itself. Used the file given on the ROM thread https://forum.xda-developers.com/oneplus-3/development/rom-resurrection-remix-m-t3399960?nocache=1.
3. TWRP couldn't decrypt my phone even with the right password.
4. Downgraded TWRP back to 3.0.1. Decryption worked.
5. Updated firmware & modem to version 4 within recovery. Used the files given on the same ROM thread.
6. Updated recovery again to twrp-3.0.2-1.28, this time via fastboot.
7. TWRP couldn't decrypt. Tried trwp 3.0.3 from the official twrp site as well. Same problem.
8. Downgraded TWRP back to 3.0.1. Recovery didn't even start. Phone freezes.
I have two questions. What is causing this problem? And second, any way I can use fastboot to downgrade firmware 3.2.6, so that I can at least access my internal storage and back it up. I got loads of data in there.
Djalaal said:
I haven't had any software update for about 1.5 months. I was on Resurrect Remix ROM Nougat, firmware 3.2.6, and on TWRP 3.0.1 (or 3.0.0 I'm not too sure). Today I tried updating. Things went wrong. Here are my steps:
1. Wiped everything except internal storage.
2. Updated recovery to twrp-3.0.2-1.28 within recovery itself. Used the file given on the ROM thread https://forum.xda-developers.com/oneplus-3/development/rom-resurrection-remix-m-t3399960?nocache=1.
3. TWRP couldn't decrypt my phone even with the right password.
4. Downgraded TWRP back to 3.0.1. Decryption worked.
5. Updated firmware & modem to version 4 within recovery. Used the files given on the same ROM thread.
6. Updated recovery again to twrp-3.0.2-1.28, this time via fastboot.
7. TWRP couldn't decrypt. Tried trwp 3.0.3 from the official twrp site as well. Same problem.
8. Downgraded TWRP back to 3.0.1. Recovery didn't even start. Phone freezes.
Hi I made that too with this rom! (https://forum.xda-developers.com/oneplus-3/development/rom-resurrection-remix-5-8-0-oms-t3527344) I think it is that 3.0.3 TWRP that did it! I hawe to wipe everything but i got it working! with these instruction https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/ Method 2 worked for me but it wipes all! there seemed to be instructions for not loosing all but i cant test it
Click to expand...
Click to collapse
I have found a solution. Even without decrypting /data, you can still get into recovery (except you can't read your data partition). This is key. What I did is simply use recovery sideload to flash the old 3.2.6 firmware (apparently flashing works even without decryption), use fastboot to flash twrp 3.0.1, and backup all my data to the computer via mtp. Then I completely wiped everything, flashed the new firmware and recovery, and decryption worked.
I'm on latest ob18. I am able to flash it, and run it once, but after reboot, the stock recovery gets Back. Any ideas?
Just Reflash twrp via flashify or adb in fastboot mode, that could be normal if u r flash an unmodified stock rom
Yep. On latest ob-Oos or H2o for me recovery stays, after instaltion of the rom. But on a second reboot, stock recovery shows and i reflash custom recovery again.
Guys I flashed latest H2OS beta over OOS Beta18 and lost access to recovery. These are the steps I followed, please help.
1. Backup current ROM (OB18)
2. Dirty Flash New H2OS version
3. Flash recovery image again
4. Reboot system
ROM booted without any problems and all my data is present but I lost access to TWRP.
Solution attempted: Reboot to fastboot and flash recovery image again, the process is successful but still TWRP is not coming up.
Please help. Thanks in advance
Stock rom always over writes recovery best way to get it to stick is flash stock zip than twrp reboot to twrp and reboot or flash mods/root
liam_davenport said:
Stock rom always over writes recovery best way to get it to stick is flash stock zip than twrp reboot to twrp and reboot or flash mods/root
Click to expand...
Click to collapse
Thanks this worked