USB suplying power to attached devices notification - Nexus 5X Q&A, Help & Troubleshooting

The phone thinks that it is connected to a device but it is not.Why am I getting this notification, I never dropped the phone and used the usb port only when I needed charge it?How does this problem even shows up from nothing? Android N

Related

[Q] I have major power and USB problems

hi there,
I have two (potentially related) problems, the power draw of my desire is immense, from a full battery I get 3hrs tops (in airplane mode). Even when plugged in I don't get much longer i receive a message saying that the power draw is too high.
I have tried restoring factory settings a few times, 3 different batteries and an external charger.
I thought it might be worth trying a custom ROM to see if that helps but i can't get the phone to connect to the computer, it appears to "charge" when plugged in (although still with the above problem) and when i enable USB debugging it senses that there is a cable plugged in and says "USB debugging connected" but the computer can't see it and the phone never asks what i want to do with it when it's plugged in. I've played around with all the USB settings on the phone, tries 2 different cables, 2 computers and both winXP and Ubuntu.
any ideas?
Liambass.

Phone restart when connect to usb/charger

My phone Galaxy s5660 was wroking fine before this issue
I did FACTORY REST DATA .phone restarted after it
As I connected to USB cable (connect with PC) phone restart and shows a big batter icon and there is a caution of no charging.
I tied to charge my cell with charger again same problem
I noticed one thing is that " AS THE USB cable / Charger connected As notification is appered "Android System"
i did nt ever tried to root or update it
pls resolve the issue
had
had same prob but not anymore and i dont know how it fixed
xtune said:
had same prob but not anymore and i dont know how it fixed
Click to expand...
Click to collapse
damnit!i got the phone for my gf and it behaves in the exact same way.too scared to flash something if i can't be sure that the battery is charged
I think that could be problem in charger/usb out in the phone.

LG-G3 BRICKED AFTER WiFi HOT-SPOT USE ?!

Hello, XDA, Good morning.
So i was using an LG G3 D850 as an access point for a hot spot while my internet was down for a bit, So i connected my PC to my phones WiFi Hot-spot right? K.
Now I had the phone running like this for quite some time, 2-4 hours roughly. During this time I must have used about 4-5 gigs of data on my phone (don't care about the data use :laugh: ) and nearing the end of my abuse on the phones internet use I noticed that the screen doesn't want to turn on, but the phone is still on AND routing the access point still.
Fine fine, so When i decided to wrap it up and shut er' down, i powered the phone off. Attempt to reboot the phone was laggy at best and lucky to actually reboot the phone a couple times in this state. I powered down after failing to boot up a few times pulled the battery then plugged USB in and I Got the normal screen that you would get (can't remember what it looked like) if you plugged into the USB w/o a battery in. Then after the standard battery failed to operate correctly I stupidly tried a different battery, which was 2,600 MAH / 3.8 V Li-ion battery / 9.88 Wh SAMSUNG battery, I know.... stupid.... ( LG battery : 3,000mAh / 3.8v Li-ion battery / 11.4Wh
Now after All this battery sh*t, the phone did boot up once or twice with the above battery, but that was it. Now when I plug USB into phone w/o the battery in I get the triangle with a question mark and a picture of a cell phone and USB cable going into it. Thats the only screen that shows up, except for the green/red/blue blinking notification light at the top left corner! PHONE IS RECOGNIZED in DEVICE MANAGER and ONLY when I power down , cable in PC , hold volume + , insert cable , hold Volume + for about 5-8 seconds til I hear computer sound beep then I let go and I get LGE Android MTP device , LGE Mobile USB Composite Device and LGE Mobile USB Serial Port So i have some connectivity but no screen display unless , plugged in w/o battery. I have tried flashing kdz file for sh*ts and giggles to see if it would do the trick but still the same.
Wheres the veterans at ! Thanks in advance , Cheers!
Forgot to mention , that, Even right now the phone is plugged in blank screen still but being charged and will blink twice every minute or more, green notification light , top left. ***
Actually it blinks automatically or if i press the power button it will blink twice as well. . . What does this mean?!
Is download mode working?
eXpel said:
Hello, XDA, Good morning.
So i was using an LG G3 D850 as an access point for a hot spot while my internet was down for a bit, So i connected my PC to my phones WiFi Hot-spot right? K.
Now I had the phone running like this for quite some time, 2-4 hours roughly. During this time I must have used about 4-5 gigs of data on my phone (don't care about the data use :laugh: ) and nearing the end of my abuse on the phones internet use I noticed that the screen doesn't want to turn on, but the phone is still on AND routing the access point still.
Fine fine, so When i decided to wrap it up and shut er' down, i powered the phone off. Attempt to reboot the phone was laggy at best and lucky to actually reboot the phone a couple times in this state. I powered down after failing to boot up a few times pulled the battery then plugged USB in and I Got the normal screen that you would get (can't remember what it looked like) if you plugged into the USB w/o a battery in. Then after the standard battery failed to operate correctly I stupidly tried a different battery, which was 2,600 MAH / 3.8 V Li-ion battery / 9.88 Wh SAMSUNG battery, I know.... stupid.... ( LG battery : 3,000mAh / 3.8v Li-ion battery / 11.4Wh
Now after All this battery sh*t, the phone did boot up once or twice with the above battery, but that was it. Now when I plug USB into phone w/o the battery in I get the triangle with a question mark and a picture of a cell phone and USB cable going into it. Thats the only screen that shows up, except for the green/red/blue blinking notification light at the top left corner! PHONE IS RECOGNIZED in DEVICE MANAGER and ONLY when I power down , cable in PC , hold volume + , insert cable , hold Volume + for about 5-8 seconds til I hear computer sound beep then I let go and I get LGE Android MTP device , LGE Mobile USB Composite Device and LGE Mobile USB Serial Port So i have some connectivity but no screen display unless , plugged in w/o battery. I have tried flashing kdz file for sh*ts and giggles to see if it would do the trick but still the same.
Wheres the veterans at ! Thanks in advance , Cheers!
Click to expand...
Click to collapse
the good news the phone isn't bricked and it can't be unless harware failure, you will need to use the button combo to get into download mode and flash a kdz their are enough threads on how to so I won't write it again
v.konvict said:
Is download mode working?
Click to expand...
Click to collapse
I believe so, There is no display on the phone however, when its plugged into the computer I don't see anything in Device manager except I hear a sound on connection , then when I hit volume + and then insert the USB cable i get MTP driver, Com PORT driver, and CDC driver I believe.
suljo94 said:
the good news the phone isn't bricked and it can't be unless harware failure, you will need to use the button combo to get into download mode and flash a kdz their are enough threads on how to so I won't write it again
Click to expand...
Click to collapse
I have flashed a kdz already using LG flash tool 2014 method. But I will try the zip and dll method i guess. If there are other options i would love to know about them.
Refraining from having to short circuit the MOBO and wondering if this problem is as easy as getting a new battery and charger ?
Thanks, Wish i still had my jtag.... zzzzzzzzz

Help to fix charging and usb connection issue

Hello dear.
I have a problem with my p601,
I cant connected my tablet to PC.
When i connected, just charging and no any connection.. In odin or storage not show a device, adb not connected...
And when i used a charger show an red stroke on battery icon. And charging is very slowly, during night only 50%.
I'm root my device, install twrp, and install cyanogenmod, but nothing change.
Now whats your idea? How i can fix this issue?
This may be an obvious question but have you tried a different cable or charger? I always found running on stock ROM that charging was an issue unless I powered it down. I have used a 12W Crapple charger and that seems to work ok but charging has never been an endearing part of the this tab.
So in Odin you it doesn't work? Could you have some dirt or contaminants in the USB port, start with the obvious, change the cable, use a different usb on the pc or try another pc altogether.
I had same problem, i noticed that the usb port was loosen little bit, i had to open the tablet apply small pressure with plier to afjust the usb port,,,, and now it's perfect.

Pixel XL - constantly defaulting to "USB supplying power to attached device"

Pixel XL - constantly defaulting to "USB supplying power to attached device"
No matter what I do, this phone constantly defaults to setting it to "USB supplying power to attached device" mode. I have never used this option so I'm unsure why the phone is doing this. I also need to adjust the settings when I try to charge it because it does not recognize that it is plugged in to a charger. After plugging in the phone to the charger, sometimes it will correct itself to "Charging" mode by switching it in the drop-down of the notification area and sometimes it will switch over after opening the Battery in settings. I have to play with the settings just to get it to charge every time and always have to have it plugged in first otherwise it will immediately default back to "USB supplying power to attached device" mode.
This phone was purchased used from someone who said they rooted the phone, but didn't install any images or roms. It currently is not rooted. And it is the Google Store version with the unlocked bootloader. Not sure if that info helps.
Can anyone tell me if this is a hardware or software issue and how to fix it?
Oddly enough after the last update I started having this problem with my radio.
I have a kenwood dnx694s. When I would plug my phone up for Android auto I would instead get the message you are getting."supplying power to attached device".
I simultaneously installed ex kernel and bought a new type c cable so I cant tell you which one fixed it. But the problem did not occur after that.
Only problem I'm having now is my charging port is going to hell. Cables don't stay in, and while trying to use my phone while charging it quickly changes between charging and discharging.

Categories

Resources