So the latest Pokémon go update blocks rooted and jailbroken phones. Has anyone had luck playing Pokémon with an app like root cloak (Xposed)??
Magisk v6 and phh's superuser might do the trick
Take look: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Hope that helps, cuz I don't play it, so idk
My phone is rooted and custom ROM and I have no problem playing as of last night PGO 0.37.
Like BoiBundy says Magisk works fine... http://www.androidpolice.com/2016/09/11/guide-play-pokemon-go-0-37-rooted-android-magisk/
Strange, For me pokemon go works without a problem on a RR official. I even have some apps working with root.
Iam in the latest cm13 nightly build, with rooted phone and pokemon go its not working.
Any ideas?
I'm looking at it actually, I blocked update on play store for now, I'm on miui 8 and it's a bit different than other rom so I don't know if we can use magisk or not.... Also because it's recommended to use it on stock ROM....
Amandroid said:
I'm looking at it actually, I blocked update on play store for now, I'm on miui 8 and it's a bit different than other rom so I don't know if we can use magisk or not.... Also because it's recommended to use it on stock ROM....
Click to expand...
Click to collapse
For me, you can use Magisk. I see any problem with miui to use Magisk.
Pokemon go and root --> Solution
ibaii said:
Iam in the latest cm13 nightly build, with rooted phone and pokemon go its not working.
Any ideas?
Click to expand...
Click to collapse
Hi,
I've succeeded to bypass root verification: you can follow Magisk v6.0 method (http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382)
Briefly,
1. You have to totally unroot your phone (trust me...), uninstall xposed -->
2. Grab Magisk v6.0 (.zip), phh's supersuser magisk version (.zip), xposed magisk version 86.5 (.zip)
3. Boot in recovery TWRP
4. Flash Magisk 6.0 then phh's superuser then xposed
5. Boot normally and install Magisk Manager (.apk)
6 You can now switch between root or unroot, before and after playing
P.S.: I've OxygenOS stock
---------- Post added at 08:48 PM ---------- Previous post was at 07:58 PM ----------
... AND install phh's superuser apk of course...
Magisk is working for me, but Pokémon has been giving me "error unable to authenticate". Any suggestions?
gleggie said:
Magisk is working for me, but Pokémon has been giving me "error unable to authenticate". Any suggestions?
Click to expand...
Click to collapse
Did you have xposed installed ?
Lowxorx said:
Did you have xposed installed ?
Click to expand...
Click to collapse
Yes, I uninstalled xposed and it now works. Getting Pokemon to work with Xposed is a little more tricky...
Not worth all the trouble. I ditched Pokémon. It's ridiculous rooted players getting blocked. No I didn't cheat with Xposed modules. I simply played only with my 6 yr old daughter. Niantic can go suck a ****
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
I used chainfire's suhide to play pokemon go and android Pay with both root and xposed
SuperSU 2.78 SR-1 + SuHide 0.53 works fine. No need to add it to blacklist, just flash and play
If you have 86.5 xposed installed, it'll still detect it
Atratus said:
If you have 86.5 xposed installed, it'll still detect it
Click to expand...
Click to collapse
You have to use 86.2 system less xposed
m3lover1 said:
You have to use 86.2 system less xposed
Click to expand...
Click to collapse
Indeed, I currently usually suhide, because I didn't want to have to toggle root on and off.
Atratus said:
Indeed, I currently usually suhide, because I didn't want to have to toggle root on and off.
Click to expand...
Click to collapse
I'm also using suhide, supersu 2.78, and xposed 86.2. Passes safetynet, pokemon go works, and android Pay works
I have it working with root + exposed modules. Safetynet check passes and I have no problems playing it.
Related
Hello everyone
Recently due to Niantic's decision to prohibit root users of playing Pokémon Go I decided to give a try to Magisk. I followed every step and even flashed my ROM again.
But when trying phh's root it wont work. Rootchecker says root was not correctly installed and trying to use any root app won't make Superuser show any prompt for root permissions.
Thank you so much for the help guys.
more info
renezada88 said:
Hello everyone
Recently due to Niantic's decision to prohibit root users of playing Pokémon Go I decided to give a try to Magisk. I followed every step and even flashed my ROM again.
But when trying phh's root it wont work. Rootchecker says root was not correctly installed and trying to use any root app won't make Superuser show any prompt for root permissions.
Thank you so much for the help guys.
Click to expand...
Click to collapse
What is your ROOT Method, That makes a difference since there might be a conflict in ROM (Preinstalled mods or apps), also, What ROM is it?
CKWTHN said:
What is your ROOT Method, That makes a difference since there might be a conflict in ROM (Preinstalled mods or apps), also, What ROM is it?
Click to expand...
Click to collapse
I flash Magisk v6 and phh's on TWRP. On the other hand I use the stock ROM MM 6.0.1 build 32.2.A.0.253
Apparently Magisk doesn't work properly on Sony devices. See topjohnwu's OP in the Magisk thread.
It partially works for me with some apps like Adaway and TiBU requesting for permissions and working properly but with most other apps not requesting root.
benengyj said:
Apparently Magisk doesn't work properly on Sony devices. See topjohnwu's OP in the Magisk thread.
It partially works for me with some apps like Adaway and TiBU requesting for permissions and working properly but with most other apps not requesting root.
Click to expand...
Click to collapse
I don't know how I could have missed that... Thanks a lot for that. I hope it gets a fix soon enough tho.
Any ideas?
I dont understand what problem pokemon go has with root.
Sent from my iPhone using Tapatalk
It will ban the users with rooted phones i had a account for my son and he can't login anymore but i don't know if is banned or is that app dose not connect to the server if the phone is rooted all he gets is Unable to connect to server.
Magisk, I runn CM 13 n only magisk do the trick.
See I tried magisk and its says it's not installed correctly
FreeTheWeb said:
It will ban the users with rooted phones i had a account for my son and he can't login anymore but i don't know if is banned or is that app dose not connect to the server if the phone is rooted all he gets is Unable to connect to server.
Click to expand...
Click to collapse
The app checks for su binaries then says your os isn't supported
Solved by changing from supersu to magisk
FreeTheWeb said:
Solved by changing from supersu to magisk
Click to expand...
Click to collapse
I thought you needed an unlocked bootloader for that to work?
lpstudio said:
I thought you needed an unlocked bootloader for that to work?
Click to expand...
Click to collapse
You can use mr.bump after flash magisk, that will do the trick. In my case magisk breaks my rom RIL but there is another option, Chainfire's suhide. You can use it with Super SU without problem and it hides root from each app individually.
lemit93 said:
You can use mr.bump after flash magisk, that will do the trick. In my case magisk breaks my rom RIL but there is another option, Chainfire's suhide. You can use it with Super SU without problem and it hides root from each app individually.
Click to expand...
Click to collapse
Nice so all I need is suhide? no magisk?
lpstudio said:
Nice so all I need is suhide? no magisk?
Click to expand...
Click to collapse
Yep.
So for me (i'm on android aosp 7.0) i dont think that mathers but...
Before you do this make sure that you have no root or xposed
The steps are the following:
1 - On twrp terminal enter these 2 comands (to ensure systemless root)
echo SYSTEMLESS=true>>/data/.supersu
echo BINDSYSTEMXBIN=false>>/data/.supersu
2- Flash the latest SuperSU v2.78 SR1 or newer
3- Flash mr.bump or cbump (to bump the kernel)
4- Reboot the phone and see if you have root
5- Use FlashFire from chainfire (because twrp doesnt work well, dont know why) to flash suhide
6- If all goes well you should have saftynet pass (pokemon and androidpay are already on blacklist)
lemit93 said:
Yep.
So for me (i'm on android aosp 7.0) i dont think that mathers but...
Before you do this make sure that you have no root or xposed
The steps are the following:
1 - On twrp terminal enter these 2 comands (to ensure systemless root)
echo SYSTEMLESS=true>>/data/.supersu
echo BINDSYSTEMXBIN=false>>/data/.supersu
2- Flash the latest SuperSU v2.78 SR1 or newer
3- Flash mr.bump or cbump (to bump the kernel)
4- Reboot the phone and see if you have root
5- Use FlashFire from chainfire (because twrp doesnt work well, dont know why) to flash suhide
6- If all goes well you should have saftynet pass (pokemon and androidpay are already on blacklist)
Click to expand...
Click to collapse
Where do I find mr.bump or cbump? I have look in all the threads regarding bump and tried google it but I can't find anything called mr.bump or cbump.
deuce237bblock said:
Where do I find mr.bump or cbump? I have look in all the threads regarding bump and tried google it but I can't find anything called mr.bump or cbump.
Click to expand...
Click to collapse
Took me a while too xD. The thread where I get it was removed.
Found it on a paranoid thread, Here you go sir: Mr.Bump - all credits to @dadi11
lemit93 said:
Took me a while too xD. The thread where I get it was removed.
Found it on a paranoid thread, Here you go sir: Mr.Bump - all credits to @dadi11
Click to expand...
Click to collapse
Thank you very much. I actually found it in the download section of this thread.
I'm using cloudyg3 2.5 rom. Any ideas if magisk will work with it?
Dunno if Magisk works anymore, there's a dedicated thread in the Magisk forum. On my S3 (which is my backup phone) I have it all installed, excluding xposed. suhide works.
http://forum.xda-developers.com/apps/magisk/discussion-pokemon-magisk-discussion-t3465722
Might reinstall the NamelessROM today to see if only systemless SuperSU and suhide are enough.
I usually run BJRR 10/18 with SuperSU SR4, SuHide v0.55, and Rootswitch, which safety net passes and PoGo works.
Is there a way to get Root, Xposed, and PoGo working on OOS 3.2.8?
I would like to try out all the new kernels that only support OOS atm
gleggie said:
I usually run BJRR 10/18 with SuperSU SR4, SuHide v0.55, and Rootswitch, which safety net passes and PoGo works.
Is there a way to get Root, Xposed, and PoGo working on OOS 3.2.8?
I would like to try out all the new kernels that only support OOS atm
Click to expand...
Click to collapse
Have you tried using magisk?
idcampo95 said:
Have you tried using magisk?
Click to expand...
Click to collapse
Yes, i've tried magisk with pHH superuser and a bunch of other magisk combos and none seem to work
Do you have xposed installed?
gleggie said:
Yes, i've tried magisk with pHH superuser and a bunch of other magisk combos and none seem to work
Click to expand...
Click to collapse
The magisk and phh superuser combo works on my phone. But when I enable xposed, the safetynet check fails. So, if you have xposed installed that could be your problem.
Hello guys, I'm using the stock version of rom 7.1.1, I made the update via OTA today. I would like to know if there is any way to use safetynet in this rom, Magisk was installed without any problems and seems to work very well (with the exception of safetynet).
Can someone help me?
larilieb1793 said:
Hello guys, I'm using the stock version of rom 7.1.1, I made the update via OTA today. I would like to know if there is any way to use safetynet in this rom, Magisk was installed without any problems and seems to work very well (with the exception of safetynet).
Can someone help me?
Click to expand...
Click to collapse
We need the kernel source so we can modify it, until then magisks safetynet won't pass.
Thanks for your answer, so the only way is to wait for the kernel ... I'm less distressed because I'm with the stock rom without root and twrp, and the only application that the play store will not let me download was Netflix, because my bootloader is unlocked... So it's ok, thank you!
larilieb1793 said:
Thanks for your answer, so the only way is to wait for the kernel ... I'm less distressed because I'm with the stock rom without root and twrp, and the only application that the play store will not let me download was Netflix, because my bootloader is unlocked... So it's ok, thank you!
Click to expand...
Click to collapse
There's a Netflix app that by pass the root check,I found it on apk mirror.
larilieb1793 said:
Thanks for your answer, so the only way is to wait for the kernel ... I'm less distressed because I'm with the stock rom without root and twrp, and the only application that the play store will not let me download was Netflix, because my bootloader is unlocked... So it's ok, thank you!
Click to expand...
Click to collapse
I have 7,1,1 stock and magisk with safety net pass, follow this steps:
1. Unistall magiks with the Unistaller Zip via twrp
2. Install magiks 12.0 vía twrp
3. Boot your phone, install magisk manager and check the correct install of magisk
4. install the module universal safety net fix (https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431) via twrp
5. DO THIS!! >>> https://forum.xda-developers.com/moto-z-play/how-to/magiks-moto-z-play-t3545473 .
6. Install magisk 13.3 via twrp and the Latest magisk manager
7. Check that the module are actived and run the safety net test
Good luck sorry for my english
larilieb1793 said:
Thanks for your answer, so the only way is to wait for the kernel ... I'm less distressed because I'm with the stock rom without root and twrp, and the only application that the play store will not let me download was Netflix, because my bootloader is unlocked... So it's ok, thank you!
Click to expand...
Click to collapse
EDIT: Nevermind, saw in other thread you've already sideloaded Netflix apk.
folken2003 said:
I have 7,1,1 stock and magisk with safety net pass, follow this steps:
1. Unistall magiks with the Unistaller Zip via twrp
2. Install magiks 12.0 vía twrp
3. Boot your phone, install magisk manager and check the correct install of magisk
4. install the module universal safety net fix (https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431) via twrp
5. DO THIS!! >>> https://forum.xda-developers.com/moto-z-play/how-to/magiks-moto-z-play-t3545473 .
6. Install magisk 13.3 via twrp and the Latest magisk manager
7. Check that the module are actived and run the safety net test
Good luck sorry for my english
Click to expand...
Click to collapse
Wow! Thank you so much, it worked very well here :good:
Thanks for the help guys!
larilieb1793 said:
Wow! Thank you so much, it worked very well here :good:
Thanks for the help guys!
Click to expand...
Click to collapse
Be careful, magisk and magisk hide drain a lot of battery (SO Android) if you don't need safetynet pass dont active the module and magisk hide
I know this is basic stuff but I needed some assitance please.
My goal is to have a systemless root with Xposed and Magisk so I can run apps like Netflix.
Besides not being able to use Netflix I'm rather satisfied with my current setup. Which is:
Note 4 Verizon / 6.0.1 / Paulpizz Rom which includes Xposed.
My problem is I've tried to install Magisk, but get stuck at a neverending load at the Verizon load screen.
I understand Netflix uses google Safetynet and I think that even if I did have Magisk installed the fact I have a custom Rom would make the check fail anyways.
Also, when I tried installing Xposed on my Stock Rom, it failed due to the compatibility issues with this combination.
So how can I change my current setup to one where I have Xposed and Magisk (or something else) that will allow me to pass Safetynet?
Thank you in advance.
Freddiesilva
freddiesilva said:
I know this is basic stuff but I needed some assitance please.
My goal is to have a systemless root with Xposed and Magisk so I can run apps like Netflix.
Besides not being able to use Netflix I'm rather satisfied with my current setup. Which is:
Note 4 Verizon / 6.0.1 / Paulpizz Rom which includes Xposed.
My problem is I've tried to install Magisk, but get stuck at a neverending load at the Verizon load screen.
I understand Netflix uses google Safetynet and I think that even if I did have Magisk installed the fact I have a custom Rom would make the check fail anyways.
Also, when I tried installing Xposed on my Stock Rom, it failed due to the compatibility issues with this combination.
So how can I change my current setup to one where I have Xposed and Magisk (or something else) that will allow me to pass Safetynet?
Thank you in advance.
Freddiesilva
Click to expand...
Click to collapse
In order to install magisk on anything now you must patch the boot IMG prior to booting for the first time . xposed needs to be your api and touvhwiz compatible . I think wanam does a version for samsung
mojoswagger1980 said:
In order to install magisk on anything now you must patch the boot IMG prior to booting for the first time . xposed needs to be your api and touvhwiz compatible . I think wanam does a version for samsung
Click to expand...
Click to collapse
Thanks for your help. I was able to flash stock rom by @PaulPizz from here and installed Magisk with stock boot.img, and installed the Xposed version from @wanam.
Special thanks to @PaulPizz and @wanam
freddiesilva said:
Thanks for your help. I was able to flash stock rom by @PaulPizz from here and installed Magisk with stock boot.img, and installed the Xposed version from @wanam.
Special thanks to @PaulPizz and @wanam
Click to expand...
Click to collapse
Nice !! That's the much stabler method I was gonna say modestrom is the stock Samsung 6.0.1 base with magisk and boot patch installed as the root method, but you pretty much did that (I'm pretty sure the kernel he made would work the ROM was built from the stock Verizon ROM )
Thanks for the info on this post I was having trouble installing xposed but now I got it working using wanam xposed on my Note 4 n910v.