Related
Gadgetwhore has a post on 3rd party metal bands. I see the warning from Moto about possible interference with radios, but I'm still very tempted... especially when one is only $12 from Amazon. What do you guys think?
Dan76 said:
Gadgetwhore has a post on 3rd party metal bands. I see the warning from Moto about possible interference with radios, but I'm still very tempted... especially when one is only $12 from Amazon. What do you guys think?
Click to expand...
Click to collapse
Meh. I say just get a band that you like and put it on. Maybe we should get people to post pictures of their M360 with their aftermarket metal band along with a purchase link and any special information so people could get one if they like it? But only bands that are actually confirmed as compatible and being used by the poster. Not to hijack or anything.
Dusty Rhodes said:
Meh. I say just get a band that you like and put it on. Maybe we should get people to post pictures of their M360 with their aftermarket metal band along with a purchase link and any special information so people could get one if they like it? But only bands that are actually confirmed as compatible and being used by the poster. Not to hijack or anything.
Click to expand...
Click to collapse
Already thread in general forum.
Ian B
Stopped by the store and picked up the pebble steel band but didn't like how it tapered down. Had this new band installed at a jewelers yesterday..
AfroCreame said:
Stopped by the store and picked up the pebble steel band but didn't like how it tapered down. Had this new band installed at a jewelers yesterday..
Click to expand...
Click to collapse
That looks sweet! So I take it that band was purchased at the jewelry store, do you mind if I ask how much it was for the band and installation?
blockhead___ said:
That looks sweet! So I take it that band was purchased at the jewelry store, do you mind if I ask how much it was for the band and installation?
Click to expand...
Click to collapse
Yes, it was around $80 installed.
AfroCreame said:
Yes, it was around $80 installed.
Click to expand...
Click to collapse
You're joking, right . Your band looks great, but that's a lot, especially considering the finish of your band. It looks like it will scratch up like crazy.
opasha said:
You're joking, right . Your band looks great, but that's a lot, especially considering the finish of your band. It looks like it will scratch up like crazy.
Click to expand...
Click to collapse
Well actually he paid the exact cost of what Moto will charge people to buy the metal bands separately later this year...
Crazypinoy9 said:
Well actually he paid the exact cost of what Moto will charge people to buy the metal bands separately later this year...
Click to expand...
Click to collapse
Yes, of that I am quite aware. Anyone who buys that ugly band...I deeply pity them - it looks like trash compared to their original (beautiful) render. They didn't even get the right dimensions when they created the connecting point. Have you seen the Engadget pics of it? It sticks out so far from the watch as if it's some cheap attachment. Paying $80 for that garbage?
opasha said:
Yes, of that I am quite aware. Anyone who buys that ugly band...I deeply pity them - it looks like trash compared to their original (beautiful) render. They didn't even get the right dimensions when they created the connecting point. Have you seen the Engadget pics of it? It sticks out so far from the watch as if it's some cheap attachment. Paying $80 for that garbage?
Click to expand...
Click to collapse
The really interesting thing about that photo is it shows the official band doesn't just clip in, it has some sort of plastic adapter. The iFixit review thought that the outer steel casing was grounded to the internals. Motorola claimed metal bands can cause interference. If that's the case, maybe this plastic adapter is to ensure the metal band never touches the metal case, since the case may be the antenna?
AfroCreame said:
Stopped by the store and picked up the pebble steel band but didn't like how it tapered down. Had this new band installed at a jewelers yesterday..
Click to expand...
Click to collapse
Have you experienced any interference with the bluetooth?
ChrisAshton84 said:
The really interesting thing about that photo is it shows the official band doesn't just clip in, it has some sort of plastic adapter. The iFixit review thought that the outer steel casing was grounded to the internals. Motorola claimed metal bands can cause interference. If that's the case, maybe this plastic adapter is to ensure the metal band never touches the metal case, since the case may be the antenna?
Click to expand...
Click to collapse
This could very well be true or just a fabrication so that people only buy their metal band. Just look at all the bands everyone is trying/discussing and successfully using. Moto knew this might happen, but probably didn't expect it to this degree. So I guess, the only story for them to get any sales at all would be to say something like this plastic adapter only comes with and fits our metal band. So if you don't want interference, you can only buy our band, until some company makes a plastic piece themselves and charges 3-5 dollars for it. Then, their argument is completely shot, lol.
If you are interested here are some of the best looking watch strap for Moto360 smartwatch I think
http://www.smartwatchappcenter.com/best-motobest-moto360-watch-strap-replacement-steel-watch-band-for-black-moto360.html
senseijuan said:
If you are interested here are some of the best looking watch strap for Moto360 smartwatch I think
http://www.smartwatchappcenter.com/...ement-steel-watch-band-for-black-moto360.html
Click to expand...
Click to collapse
Although they are all black only.
Sent from my Samsung Galaxy Tab Pro 10.1
opasha said:
Yes, of that I am quite aware. Anyone who buys that ugly band...I deeply pity them - it looks like trash compared to their original (beautiful) render. They didn't even get the right dimensions when they created the connecting point. Have you seen the Engadget pics of it? It sticks out so far from the watch as if it's some cheap attachment. Paying $80 for that garbage?
Click to expand...
Click to collapse
I like that stock metal band, it looks very nice. I think the reason it looks nicer than any aftermarket one is that it's oversized, you can see that the band is wider than the slot it fits into. I'd guess it's at least 24mm and also it doesn't taper.. It's such a huge watch it needs a very wide strap otherwise it looks cheesy.
I can see the attachment point looking odd if you have thin wrists, as the person in your pictures does. Then when it exits out it makes a sharp 90 degree turn down and looks like it doesn't belong, a curved adapter like many watchband have would have solved this. I'll bet it looks good with a thicker wrist though.
Here is a pic of the moto band unattached, I don't think its a plastic adapter at all. It looks like the attachment points are simply tapered down arms.
I got a relic band, it's stainless steel and I have had it on for about a day and no issues with any signal or anything
So the are not offering the band they originally showed with the watch? That was a huge buying decision for me
cds36 said:
So the are not offering the band they originally showed with the watch? That was a huge buying decision for me
Click to expand...
Click to collapse
they are, but at a later date. For early adopters they will offer the band for a special price.
Hey guys,
we in Germany must wait till 10/09 to buy the moto360.
I am searching right now for a metal band. Before I buy one should i know how the surface is. Is it glossy or mat?
I am deciding between these two:
Glossy:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18413h572s2721-Uhrenarmband-Edelsta.html
Mat:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18417h572s2721-Uhrenarmband-Edelsta.html
Thanks
Gesendet von meinem Nexus 5 mit Tapatalk
WingnutStrikesBack said:
Hey guys,
we in Germany must wait till 10/09 to buy the moto360.
I am searching right now for a metal band. Before I buy one should i know how the surface is. Is it glossy or mat?
I am deciding between these two:
Glossy:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18413h572s2721-Uhrenarmband-Edelsta.html
Mat:
http://www.uhrenarmband-versand.de/Uhrenbandversand-p18417h572s2721-Uhrenarmband-Edelsta.html
Thanks
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
The finish of the Moto360 is pretty reflective/glossy but not too glossy. Here are two completely different watch bands with the black.
1) Pebble Steel Black Metal Band: http://forum.xda-developers.com/showpost.php?p=55450516&postcount=10
2) Glossy Black Metal Band: http://forum.xda-developers.com/showpost.php?p=55338761&postcount=105
Here's the full thread for watch bands: http://forum.xda-developers.com/moto-360/general/thread-to-discuss-22mm-watch-bands-t2868429
Hey, I was just online getting a Nexus 6 direct from Motorola and I noticed that Moto 360 is available with a metal band.
How long has that been available? Did I miss something?
Metal bands
You didn't miss anything, this was literally announced a while ago. A while being like an hour ago. They released a few things as well, not only the metal bands. Availability of new bands, such as Cognac Brown and Silicon bands as well, including leather bands made by DODOcase. Software update to the Motorola Connect also will allow you to customize the watch faces, add the Moto Contest Winner's new face and an updated health app including Calories and Distance. I think it's pretty cool and I can't wait until they release the bands separately (momentarily you can only buy them when purchasing a new Moto). Tomorrow's their AMA on Reddit, worth it to check it out and see if we can squeeze anything out of them about official release dates .
http://motorola-blog.blogspot.de/2014/11/moto-360-choose-watch-that-fits-your.html
I doubt they would answer, but we could ask them if they made a hardware revision to prevent the back from cracking so easily. I mean, if it happens with a leather band, I would think it would be even easier to crack with metal putting pressure on it. Unless they made it so the first link in the watch doesn't move so it can't push against it.
Sent from my Nexus 5 using Tapatalk
Called Motorola today
I spoke with a Sales rep to buy just the band, but they're not ready yet.
charesa39 said:
I doubt they would answer, but we could ask them if they made a hardware revision to prevent the back from cracking so easily. I mean, if it happens with a leather band, I would think it would be even easier to crack with metal putting pressure on it. Unless they made it so the first link in the watch doesn't move so it can't push against it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
The metal bands for Moto 360 seem to be quite customized from the pictures, in order to prevent touching the plastic back.
kevinlevrone said:
The metal bands for Moto 360 seem to be quite customized from the pictures, in order to prevent touching the plastic back.
Click to expand...
Click to collapse
I was looking at that as well. Is the black plastic part of the metal band or the watch itself? If this is an addition to the watch to prevent cracking, this should be implemented with all the nonmetal band models as well. This would give many an incentive to just purchase the metal for this retrofit and then get a leather band as well.
Something is definitely wrong
Is it just me or does the moto 360 with the metal band look no where near as good as they made it seem in the concept pictures.
Take a look at this and compare it to what they are selling.
http://i-cdn.phonearena.com/images/articles/126717-image/Moto-360.jpg
I know that I may be being naive but I honestly expected more.
شیرخدا said:
Is it just me or does the moto 360 with the metal band look no where near as good as they made it seem in the concept pictures.
Take a look at this and compare it to what they are selling.
http://i-cdn.phonearena.com/images/articles/126717-image/Moto-360.jpg
I know that I may be being naive but I honestly expected more.
Click to expand...
Click to collapse
The metal band from the concept pictures is a different model from the one they actually sell, you can't compare like this. Maybe in the future they will sell that model too, but seeing how long it takes them to sell even run-of-the-mill bands I don't hold much hope.
So you cant actually pick the bands up in a store anywhere yet, this is just for ordering online? Any idea when you can get these in BB?
شیرخدا said:
Is it just me or does the moto 360 with the metal band look no where near as good as they made it seem in the concept pictures.
Take a look at this and compare it to what they are selling.
http://i-cdn.phonearena.com/images/articles/126717-image/Moto-360.jpg
I know that I may be being naive but I honestly expected more.
Click to expand...
Click to collapse
So did I.
The bands they are showing now look absolutely crap compared to what was originally shown.
I'm seriously disappointed in Motorola, firstly for the flat tyre and now the crappy metal band they are trying to palm off on us.
Apparently they are also going to try and charge $80 for the band alone, they're smoking some serious crack.
When I got mine at best buy, there was a metal band available for $30. Said compatible with moto 360.
www.engadget.com/2014/11/06/moto360-metal-bands/?ncid=txtlnkusaolp00000602
http://www.engadget.com/2014/09/05/...vity&utm_medium=referral&utm_source=pulsenews
And they are expanding the leather options with some from DODO case, PLUS they are finally adding the winning watch face from the face-off contest!
What happened to the good looking one in all the promo shots?
Is it me or are there still no links to actually purchase the band's separately?
Takin Notes..
Yup.. Seems like they ain't releasing the bands separately
So they're here, but not here. Thanks Motorola.
skally said:
What happened to the good looking one in all the promo shots?
Click to expand...
Click to collapse
Indeed, that one looks much better. This new one looks crap.
Apparently ATT has the bands available individually now...
http://www.droid-life.com/2014/11/0...al-individual-watch-bands-right-now-from-att/
I can't tell if the "Gray Lether" is the initial Gray, or the Stone Gray (Based on Moto's Blog it should be STONE Gray)
Amazon has a listing for the "Dark Metal" band -> http://www.amazon.com/Motorola-Mobi...sbs_cps_2?ie=UTF8&refRID=0B9DJ4AVD63GXN0XAJB7 but its not available yet.
$80 for the metal bands?????????????????????????????????????????????
Thats crazy.
Are these bands even available for pickup anywhere? Or is this online order only
Went into an AT&T store today and the people there said that it's online order only.
More coming...
I missed that there are pictures of the future bands are available at -> https://drive.google.com/?tab=mo&authuser=0&pli=1#folders/0B8Kpi4PsQvSQVFBDRk1LOHA4ZGs
(link is found at the bottom of http://motorola-blog.blogspot.com/2014/11/moto-360-choose-watch-that-fits-your.html )
The pictures there show the Cognac_Leather, DoDo_Pumpkin_Tan, Dodo_Red, Dodo_Slate_Blue, Dodo_Teal, Tylt_Black, Tylt_Navy, Tylt_Olive, Tylt_Purple
Kind of interesting.
I wonder when they will the rest will be available, and from where?
It's probably a little over priced, but I just ordered one of the silver steel bands. If it saves my plastic from cracking it's worth it. I tried a Pebble band and it's ok I'm just really nervous the back will crank, I even Dremeled it a bit but it doesn't seem to take much stress off the edge of the plastic bottom. I will post back with pictures and more details of how it turns out if you guys want. And I'm not willing to void my warranty installing the super engineer 2 band, or whatever it's called, which also costs 80$ for the band.
DrPopper said:
It's probably a little over priced, but I just ordered one of the silver steel bands. If it saves my plastic from cracking it's worth it. I tried a Pebble band and it's ok I'm just really nervous the back will crank, I even Dremeled it a bit but it doesn't seem to take much stress off the edge of the plastic bottom. I will post back with pictures and more details of how it turns out if you guys want. And I'm not willing to void my warranty installing the super engineer 2 band, or whatever it's called, which also costs 80$ for the band.
Click to expand...
Click to collapse
Do post pictures of how the band fits into the watch, when you have it installed. [emoji4]
DrPopper said:
It's probably a little over priced, but I just ordered one of the silver steel bands. If it saves my plastic from cracking it's worth it. I tried a Pebble band and it's ok I'm just really nervous the back will crank, I even Dremeled it a bit but it doesn't seem to take much stress off the edge of the plastic bottom. I will post back with pictures and more details of how it turns out if you guys want. And I'm not willing to void my warranty installing the super engineer 2 band, or whatever it's called, which also costs 80$ for the band.
Click to expand...
Click to collapse
do you have a link for the silver band?
Im concerned about the size of the bands. Im at rep at AT&T, and when we got in the moto 360 with the dark metal band i tried it on. It was really tight! Im a big guy, but not big enough were my wrists would be above average girth, so for an average male those bands are small. Are they sold in sizes? Can you add links to the band? I looked inside the box and there were no extra links. Am I going to have to buy the watch that comes with the metal band AND buy an additional metal band just to get links out of it to add to the main? Anyone know?
darkleafar said:
Im concerned about the size of the bands. Im at rep at AT&T, and when we got in the moto 360 with the dark metal band i tried it on. It was really tight! Im a big guy, but not big enough were my wrists would be above average girth, so for an average male those bands are small. Are they sold in sizes? Can you add links to the band? I looked inside the box and there were no extra links. Am I going to have to buy the watch that comes with the metal band AND buy an additional metal band just to get links out of it to add to the main? Anyone know?
Click to expand...
Click to collapse
Everywhere I've read has said it comes with 4 extra links. One guy said he couldn't find them like you, but upon further inspection of the packaging, they were in a little paper envelope. Maybe you just missed it?
charesa39 said:
Everywhere I've read has said it comes with 4 extra links. One guy said he couldn't find them like you, but upon further inspection of the packaging, they were in a little paper envelope. Maybe you just missed it?
Click to expand...
Click to collapse
Its possible! I inspected the box very quickly because I was on the clock, lol. I will check again first thing tomorrow! Just to be sure, you are referring to the watch that already comes with the band, not the band by itself, correct?
darkleafar said:
Its possible! I inspected the box very quickly because I was on the clock, lol. I will check again first thing tomorrow! Just to be sure, you are referring to the watch that already comes with the band, not the band by itself, correct?
Click to expand...
Click to collapse
Correct. The one that costs $299 and comes with the metal band instead of the leather band. I've been holding out this entire time for the metal band version to finally be released, and I ordered it from Best Buy today. Getting it shipped to store, so should be here in a few days. Can't wait.
Has anyone actually found the metal band in the wild yet, or is AT&T the only place you can get them? For anyone who has ordered from AT&T, how long did it take to get the band?
I originally purchased my Moto 360 with the "stone leather" band. Color is the ugliest from all the leather bands, but it was the only one available at the time with a silver watch (which was a must for me). All was fine and dandy, until the band begun to smell awful. I did wear my watch while doing weight training four times a week, but I suppose that's why it has a heart rate monitor, right ? I tried to get off the smell using a stain remover called "Vanish" which "eliminates 99% of bacteria". It did eliminate the original bad smell but another chemical smell took its place and stayed there. I finally destroyed the color of my leather band using sodium bicarbonate in one last try to eliminate the smell.
I didn't want to use 3rd party metal bands because I was afraid I would end up with a cracked watch back, and also due to the watch lugs design, they don't look good attached to the watch because they form a steep angle while exiting the watch, leading to a "hockey puck" look.
Finally the official metal bands became available via Amazon (the only ones shipping to a package forwarding addres - I live inside EU). I purchased the band for more money than I would like to spend but it was a must. I also purchased a cheap set of tools to help me replace it. I replaced the band in about 2 hours, being very careful not to scratch anything, and I succeeded to keep the watch intact. However, from this experience I advise you that this is not a simple operation and it's better to go to a jeweler. This is because the pins are hidden inside the watch and the original band takes up all the space and the pins are not visible and are hardly reachable. Also, the link pins are very hard to get out from the band in order to adjust, even with specialized tools. I really hope Motorola changes the band attachment and adjustment style on the Moto 360 v2, an easier procedure is sorely needed. Maybe they could take some hints from the Apple Watch
The band feels a lot better on hand compared to the leather band (strangely). The leather band was constantly reminding me that it's there, like I had some kind of allergy to it, I had to adjust it all the time, plus the bad smell. The metal band heats up to body temperature and you really don't feel it, despite being heavier. However, in my opinion, the metal band is about 1-2mm wider than ideal. Its actually 23mm instead of the standard 22mm. It's out of balance compared to the watch diameter and overall size. Another disadvantage of the metal band is that at the watch entry point the band looks unnatural, unfinished. The wide links end about 3mm before the rest of the band enters the watch, creating this "unfinished" effect. I think they could have done a better design. But this is a minor problem, overall the watch looks a lot better with the metal band. I do think it would look very good with the new cognac leather band, but I have to wear it while training so I can't use any more leather bands. Maybe a silicone band would come handy.
About the cracked back issue, the official metal band has 2 plastic pieces that are designed in such a way that the metal band never touches the watch back. Even the plastic pieces don't put strain on the back, it's very well designed in this regard.
A picture of the watch is attached to this post. Thanks for reading
Thank you for your input and the picture.
i have yet to see the real shape of them plastic spacers... if u ever take band off, i would like to see the actual close up pic of those plastic things
chaco81 said:
i have yet to see the real shape of them plastic spacers... if u ever take band off, i would like to see the actual close up pic of those plastic things
Click to expand...
Click to collapse
I posted some photos in the Accessories section about a week ago:
http://forum.xda-developers.com/showpost.php?p=57436743&postcount=19
Well got mine today from the US, ... Cousin was coming to India
Tomorrow I will apply it.
There is a video on YouTube where it seemed it was fairly simple to change it.
Sent from my SM-N910C using Tapatalk 2
Good Review .. Thanks man
Sent from my SM-N910C using Tapatalk 2
I prefer the look of the pebble steel band for some reason.
macropterous said:
I prefer the look of the pebble steel band for some reason.
Click to expand...
Click to collapse
I did at first also.
But after checking it out at BB, I wasn't impressed.
I'm now leaning to the Moto band, or this Mesh one on Amazon:
http://www.amazon.com/gp/aw/d/B00PV...qid=1419285189&sr=8-15&pi=AC_SX110_SY165_QL70
I guess no one has paired the steel watch with the black steel official band? What do you think:
Sent from TabPRO 8.4
It's an interesting look, but I'd still go with the silver one, on the silver Moto 360. I just wish the bands were a bit cheaper. 79.99 is kind of a lot.
I finally got mine from Moto - I ordered the black watch with black band and they held it up for a month waiting for the screen protector to come in. Jerks. But I digress
The band was too small so I added a link using a cheap kit I bought on Amazon (and man are the tools included cheap! Not quite single use but close). The band was too wide to see what I was doing in the pin removal tool so I had to do it manually with a dinky hammer and an appropriate pin removal tool. Long story short, it wasn't terribly difficult to just add or subtract a link.
It looks good and works well - my only gripe is that the little space between the band and the watch case doesn't look like what I'm used to looking at.
For those of you thinking the bands are expensive... I tried to order a replacement band for my TAG sports elegance watch and those burglars wanted $600 for a new band. So I got a moto360 instead.
FYI:
http://forum.xda-developers.com/showpost.php?p=57809422&postcount=23
Has anyone found the banda up for sale online? I bought the "Milanese" SS mesh one and I really like it but j wanted a spare one because I tend to break things. Its very well made but I will find a way to break it in some clumbsy way. A variety of bands would be nice with the quick change pins being a marketing point too.
Coming soon... http://www.gethuawei.com/buy-huawei-watch#bands
Pilz said:
Has anyone found the banda up for sale online? I bought the "Milanese" SS mesh one and I really like it but j wanted a spare one because I tend to break things. Its very well made but I will find a way to break it in some clumbsy way. A variety of bands would be nice with the quick change pins being a marketing point too.
Click to expand...
Click to collapse
From the website:
Covart said:
From the website:
Click to expand...
Click to collapse
Thanks for posting that, I'll have to look at them.
Edit: I wonder why they are so expensive because I can buy a nice watch band from other real watch companies for that price. I was looking for a black Milanese loop to add contrast to the design as an alternative but not for $80-170 with the leather likely being $80, then the Milanese ~100-120, steel $150 and the gold steel and/fancy leather one sitting at $170. That's just my guess of their pricing scale
I have the stainless but want the mesh.
AfroCreame said:
I have the stainless but want the mesh.
Click to expand...
Click to collapse
The Milanese mesh is really nice, I just wish a spare wasn't so expensive. If the watch were a Tag or Omega I would spend whatever on a band but it's a smart watch. I tend to break things so having a backup is usually what I do
Pilz said:
The Milanese mesh is really nice, I just wish a spare wasn't so expensive. If the watch were a Tag or Omega I would spend whatever on a band but it's a smart watch. I tend to break things so having a backup is usually what I do
Click to expand...
Click to collapse
I have the mesh, and it's very nice looking. However, the clasp is big time PITA. It's very awkward. Almost makes me wish they had one like...The Apple Watch. Sorry...
c5d said:
I have the mesh, and it's very nice looking. However, the clasp is big time PITA. It's very awkward. Almost makes me wish they had one like...The Apple Watch. Sorry...
Click to expand...
Click to collapse
How is it a PITA? Mine covered l closes easily and stays put
Pilz said:
How is it a PITA? Mine covered l closes easily and stays put
Click to expand...
Click to collapse
It're really more of a minor thing...but enough for me to complain about it...
There are times that I "think" I have it fully clasped, but it really isn't. It's like I need to make sure the clasp clicks twice. There was one time I only "did the click once", and I thought it was closed, but wasn't. Watch came off during apple picking...yay (sarcasm...to both the watch and the apple picking). However, I understand that's an end-user issue...but still...
The more of the PITA situation is trying to get it on. I find I have to hold the watch against my chest, stomach, or thigh and then play "thread the needle" with the sliding part of the band into the clasp. It's not super convenient. Also, tightening the band is fairly difficult. Maybe I don't have enough experience with watch clasps (I had a leather band on my Moto360, and I had a link clasp on my previous Citizen), but putzing with this clasp and band is a little more difficult that I thought it would be. Again, if you compare this mesh band and clasp versus the Apple Watch mesh band and magnetic clasp...the Apple product is easier to use. But then...I'd have to use an iPhone...
Is this super difficult? No. Does it make me wish I had a different band? No. Will I still gripe about it? Of course...this is a forum on the Internet...
c5d said:
It're really more of a minor thing...but enough for me to complain about it...
There are times that I "think" I have it fully clasped, but it really isn't. It's like I need to make sure the clasp clicks twice. There was one time I only "did the click once", and I thought it was closed, but wasn't. Watch came off during apple picking...yay (sarcasm...to both the watch and the apple picking). However, I understand that's an end-user issue...but still...
The more of the PITA situation is trying to get it on. I find I have to hold the watch against my chest, stomach, or thigh and then play "thread the needle" with the sliding part of the band into the clasp. It's not super convenient. Also, tightening the band is fairly difficult. Maybe I don't have enough experience with watch clasps (I had a leather band on my Moto360, and I had a link clasp on my previous Citizen), but putzing with this clasp and band is a little more difficult that I thought it would be. Again, if you compare this mesh band and clasp versus the Apple Watch mesh band and magnetic clasp...the Apple product is easier to use. But then...I'd have to use an iPhone...
Is this super difficult? No. Does it make me wish I had a different band? No. Will I still gripe about it? Of course...this is a forum on the Internet...
Click to expand...
Click to collapse
Mien has a very distinctive click when I close it so it's hard to not know if it's closed. Apple makes things simple for people who don't understand/know technology so I can see why they used a magnet. I understand how you might not be able to tell its closed because if it's not lined up with one of the notches on the underside it won't close, but if it is lined up its very easy to tell. I regularly bused a leather band both of my LG Urbane and my mechanical watch so it is a chance but no one that's hard to get used to. I like the metal one personally because leather wears out much faster from experience, even expensive quality leather bands. I gave a buffalo leather on my mechanical watch that's really nice but after a year it needs replacing because it loses its nice look. I'm trying to find a nice Milanese band like the Huawei one but for my mechanical watch because I really enjoy the look/feel of it.
I actually wish they made a sport band so that I could wear it while working out or doing any sort of physical activity.
I just installed a third party stainless steel mesh band onto a black Huawei watch. Purchased the band on Amazon. For being really inexpensive ($10) it is actually not that bad :thumbup: It's fairly comfortable and smooth, with no sharp links or rough edges on the band itself. Clasp feels a little cheap but sturdy enough. Again, no sharp corners or anything.
It doesn't have quick release spring bars, unfortunately. But it was not hard to install. Took less than 2 minutes using regular spring bars, and I was being ultra careful so as not to scratch the black coating of the watch. I could probably do it in less than 30 secs next time.
Also, it is not a feed through mechanism. It's the "interlocking" type. So that's a plus for those who find the feed through type a pain.
There's several of these around, and I'm sure they're pretty comparable with other cheap bands. Here's the link to the actual one I tried: https://goo.gl/P8alWI
When are they due out?
I wish I could find the black mesh band that was in some of the early promotional pics of the watch.
I found this one on Amazon. I wonder how good it is.
http://www.amazon.com/gp/product/B0...eather Band&qid=1444831623&ref_=sr_1_1&sr=8-1
falcon26 said:
I found this one on Amazon. I wonder how good it is.
http://www.amazon.com/gp/product/B0...eather Band&qid=1444831623&ref_=sr_1_1&sr=8-1
Click to expand...
Click to collapse
Hmm, their Apple Watch bands seem to get good reviews: 4/5 stars on most of them. I may order one of these tonight.
I wonder if this would work: http://www.amazon.com/Voguestrap-TX...=8-26&keywords=18mm+watch+strap+leather+casio
Hanger4life said:
I wish I could find the black mesh band that was in some of the early promotional pics of the watch.
Click to expand...
Click to collapse
Please message me if you do. My black watch is shipping and I would love to get the black mesh one. So sexy on the black watch.
Here's my band, a third party Mesh Band that's 99.9% similar to the OEM Mesh Band and has quick release pins. Designed for the Huawei and feels nice, had it for a week now! http://imgur.com/a/B1Onc
http://pages.ebay.com/link/?nav=item.view&id=161889778218&alt=web
c5d said:
I have the mesh, and it's very nice looking. However, the clasp is big time PITA. It's very awkward. Almost makes me wish they had one like...The Apple Watch. Sorry...
Click to expand...
Click to collapse
Have to agree, I have the mesh and I like the looks and the ~infinite adjustment, but it's a royal PITA to put on.
I would love a black leather band for my black Hwatch. Anybody found one? Would prefer not a straight 18mm.