Related
after I tried unsuccesfull to Install a custom rom I got this msg and my lg pad wont start anymore...
can any1 help me pls? see Image at attachments.
No attachment. Do you get LG logo and bootloop? If so, don't worry mate.
CuraeL said:
No attachment. Do you get LG logo and bootloop? If so, don't worry mate.
Click to expand...
Click to collapse
there Is now. pls help me mate
Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.
CuraeL said:
Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.
Click to expand...
Click to collapse
thanks for your reply.
yes I did use the wrong recovery, as a matter of fact I didnt know which one to use so I choose one randomly
the bad thing I did what u said. and nothing happened .. still stuck at the lg logo and Is not charging anymore...
Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.
CuraeL said:
Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.
Click to expand...
Click to collapse
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN
ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
Here is quote from someone else I found in another place but shutdown the thread without thinking.
I use the download mode to install the original official rom.
1. Download the LG MOBILE SUPPORT TOOL by this link:http://www.lg.com/us/support-mobile/lg-V500-White
2. install the software in computer, Plug in USB cable with computer, Open the software LG MOBILE SUPPORT TOOL.
3. Turn off Pad and unplug.
4. press hold both volume up and volume down, Then plug in usb cable, And then pad is in downlaod mode
5. USB driver will be insatlled automatically
6. In LG MOBILE SUPPORT TOOL, click option---.country and language-OK, then click option--upgrade recovery
7. It will installe original official rom automatically.
8. After about 1.5 hours, The pad will be installed the last official room.
^ This is a quote and now I shut down the thread, sorry, don't know who said it, just got stoked when I saw it.
---------- Post added at 03:17 PM ---------- Previous post was at 03:13 PM ----------
ANTRIK said:
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN
Click to expand...
Click to collapse
What? You got recovery booted but it restarted itself again to LG screen? If you can, just stay in recovery.
CuraeL said:
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.
Click to expand...
Click to collapse
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p
ANTRIK said:
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p
Click to expand...
Click to collapse
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa
CuraeL said:
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa
Click to expand...
Click to collapse
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi
ANTRIK said:
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi
Click to expand...
Click to collapse
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!
CuraeL said:
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!
Click to expand...
Click to collapse
hey man thanks for ur reply.
so far we are In the same page
I downloaded v50010a which Is my devIce then loki zip
but I have no Idea what Is cdm and adb I tried to open cmd and run thoose commands but I getting eroor adb not support something like that.
although I download adb.exe and fastbook and Installed It.
Is It any way to flash recovery though my tablet like goo apps or rom manager ?
thanks.
Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.
CuraeL said:
Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.
Click to expand...
Click to collapse
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.
ANTRIK said:
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.
Click to expand...
Click to collapse
Happy to help, see you on the forums.
Hello everyone, i have used this site for root another phones on past but now i can't understand how to fix my problem by myself. Thats why i'm here to kindly ask(beg) for help.
I tryed to root the phone, first i used the Framaroot, i thought it worked but look likes not, i'm getting the Secure booting Error! Couse: boot certification verify.
Ok, looks not a big deal, lots of guys got it and solved their problems with this post. But now is where i ask sorry because i couldn't make it.
I can enter on dowload mode, i tried all the steps on the post and did not worked. I need a light.
When i used the KDZ_FW, i got a message of error on extrating file.
When i tryed make a Recovery Hard Reset, i got the message Secure booting Error! Couse: boot certification verify.
When i try to turn it on by pressing the power + volumerdown = nothing happen.
I have a Optimus G E977, and the software was the E97710d.
Thanks for the attention.
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Maybe U can help me too.
Everything was fine with my OG but problems start when installing CM11. I decided to go back to stock later (I did it) but then couldnt be able to enter recovery or download mode. I tried several methods like re root, unlock again and lately using ROM Manager and trying to install another recover all get screwed up. Only black screen. Trying and trying I could install KDZ firmware
So then I root, unlock boatloader with method one from here: http://forum.xda-developers.com/showthread.php?t=2667398
Ok i dont know if boatloader is unlocked now but i know I cant enter recovery or download mode. Im afraid to use freegee to try to unlock again.
What should I do.
Thanks
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Fuguets said:
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
Click to expand...
Click to collapse
Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
ErnestoD said:
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Click to expand...
Click to collapse
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide: http://www.htcmania.com/forumdisplay.php?f=1026
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.[/QUOTE]
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
ErnestoD said:
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
Click to expand...
Click to collapse
[/QUOTE]
I didnt see that on XDA. I used this method with 2 kdz´s, one smaller and another one bigger than 1gb.
Maybe U missed something.
Fuguets said:
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
Click to expand...
Click to collapse
[/QUOTE]
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Fuguets said:
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Click to expand...
Click to collapse
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
ErnestoD said:
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Click to expand...
Click to collapse
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Fuguets said:
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
Click to expand...
Click to collapse
I did not overwrite that folder, maybe we are looking for different guides because if that was something that i supose to do i didn't saw that on the guide.
I did not edit hosts file.
I restarted the computer now again, and now my message is: device not found.
Can you place the link of exacly guide i need to look ? Couse the link you send me before has a various of them.
ErnestoD said:
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
ErnestoD said:
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
Click to expand...
Click to collapse
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Edit1: I foun this guide, do you think it could help me ?
But I didn't understand that well, looks like I need to be able to start the OS of the phone, which i can't.
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Fuguets said:
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Click to expand...
Click to collapse
ErnestoD said:
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Click to expand...
Click to collapse
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Hello guys,
I am so happy that I wanted to share this with you. As I still have headache from googling how to flash back your stock rom (which didn't work out because the flash tool gave an error every time at 15%), I can save you a lot of headache with this very very simple fix.
For some people the tool works just fine, but when you have some google bootloader or a newer freegee unlocked one and you want back to stock, lots of people cant follow this thread because of the error at 15%.
The fix is EASY and I found it on the Optimus L9 section, thanks to that guy on XDA.
Follow exactly Davevinci's great thread except for one thing:
http://forum.xda-developers.com/show....php?t=2498102
Step 4 is now:
4.GO TO DOWNLOAD MODE POW+BOTH VOL BUTTON PRESSED+CONNECT USB
But step 4 should be:
- Boot up your phone in any stock based rom, for example SAVVY Rom V5
- Enable USB debugging and connect your phone through USB using the LG PC Suite option (make sure to kill PC suite in tast manager).
Now you should see the driver installation of LGE Android MTP device as usual and then just run the flash tool from the guide. Also de mode DIAG is now the right one. The flashtool will reboot your phone to download mode automatically when it's needed.
Still an error? Don't worry, disable virus scanner and firewall and just reconnect your phone. I got an error one time, during flashing, but I followed the steps the flashtool suggested me and now everything went fine.
Click to expand...
Click to collapse
The link U provide is not working and U didnt upload any log, I didnt see it.
As I read to perform that action u must be able to turn on your phone.
Did U try to flash a smaller then 1gb kdz or try another ones.
As U can see U wont receive to much help in LG forum. There are good guides but on time help is another thing.
Did U try this guide (method 1): http://forum.xda-developers.com/showthread.php?t=2667398
Is your phone properly detected in your PC?
Fuguets said:
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Click to expand...
Click to collapse
I did not tried with a smaller archive because I can't download it. Among the Brazilian files I only can download the version 10D. I am on phone now but I will send the link that I'm trying asap. I really appreciate your help man. Even that I didn't found the solution yet is nice count with some experience help.
Enviado de meu XT1032 usando Tapatalk
Edit: From this list http://forum.xda-developers.com/showthread.php?t=2093382 , all brazilian links show Access Denied
And from here http://lg-phone-firmware.com/index.php?id_mod=20, only the V10D of Brazil.
I'm looking for the number 16, CLR/CLARO(BRAZIL) which is less than 1GB. Maybe i'm wrong, but when i clic on the name, a page of TNY shows a link of ADFLY that after i clic on close advertisement nothing happen.
About the method 1, I did try that, but sometimes it says "device not found" or "the system cannot find the patch specified". I'll try that from another computer, i let you know if i have some lucky. But the guy of the guide said:
!enable usb debugging
connect as MTP
follow the script"
Maybe its not for me.
Look what happen. (I'm using download mode)
*********************************************
* Tool Unlock BL Optimus G - Update 0414 *
* *
*********************************************
*** Select a number ***
1. UNLOCK BOOTLOADER
Seclect a number : 1
1. [Unlock] Optimus G JB 4.1.2 Selelct
Seclect a number : 1
FreeGee UNLOCK
Thanks to Team Codefire
1. JB 4.1.2
╣Seclect a Number : 1
1. KT
2. SKT
3. LGU+
╣Seclect a number : 1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
Unlock BL success.
╕Reboot [y]/[n] :
About my phone get propper detected, i guess it is, at least on my devices map it shows "Lg AndroidNet Phone"
Hi! I'm having a problem with rooting my phone, a HTC Desire 820, with Lollipop 5.0.2. I used this tutorial: http://forum.xda-developers.com/desire-820/general/htc-desire-820-root-easily-t2913064 however when I get to step 7 ("After Step 6 is finished Using volume keys navigate and select recovery option and go to recovery") I get stuck. The option "recovery" is in the subfolder "HBOOT" and when I press it it reboots my phone, flashes the red warning text about warranty and development stuff, and then reboots in Fastboot. If anyone could help, that would be wonderful. Thank you
Foolsfoolsfools said:
Hi! I'm having a problem with rooting my phone, a HTC Desire 820, with Lollipop 5.0.2. I used this tutorial: http://forum.xda-developers.com/desire-820/general/htc-desire-820-root-easily-t2913064 however when I get to step 7 ("After Step 6 is finished Using volume keys navigate and select recovery option and go to recovery") I get stuck. The option "recovery" is in the subfolder "HBOOT" and when I press it it reboots my phone, flashes the red warning text about warranty and development stuff, and then reboots in Fastboot. If anyone could help, that would be wonderful. Thank you
Click to expand...
Click to collapse
I think you should try again...I used this tutorial to root my phone....it worked like a charm......make sure your drivers are properly installed and you follow proper steps in Step 6 (If i'm not wrong the second option in the flash-recovery.bat cmd does the trick!! )
hitesh_hotchandani1993 said:
I think you should try again...I used this tutorial to root my phone....it worked like a charm......make sure your drivers are properly installed and you follow proper steps in Step 6 (If i'm not wrong the second option in the flash-recovery.bat cmd does the trick!! )
Click to expand...
Click to collapse
Sorry, but this isn't very helpful. I asked for help, not for someone to tell me to try again. I followed every step perfectly, my phone just appears to be missing an option.
If you aren't going to help, please don't post.
Can anybody please help me? I have a link to my YouTube video: https://www.youtube.com/watch?v=_BU1guhG62k
Press all the buttons simultaneously, when phone starts to boot leave the volume plus button while holding other bottons... See whether its helps... Try few more times if u don't succeed at first attempt.. Or try different button combinations
alok singh said:
Press all the buttons simultaneously, when phone starts to boot leave the volume plus button while holding other bottons... See whether its helps... Try few more times if u don't succeed at first attempt.. Or try different button combinations
Click to expand...
Click to collapse
Holding all the buttons boots it normally, even when I let go of the plus button. Pressing other button combinations I launched into Safe Mode and into regular Bootloader but nothing worked. Can you help?
OK, I guess u have flashed a wrong twrp... Try this http://forum.xda-developers.com/showthread.php?t=3232331
alok singh said:
....guess u have flashed a wrong twrp... Try this....
Click to expand...
Click to collapse
@Foolsfoolsfools, any success as yet?
alok singh said:
OK, I guess u have flashed a wrong twrp... Try this http://forum.xda-developers.com/showthread.php?t=3232331
Click to expand...
Click to collapse
This is for the dual-sim 820. I have a single-sim.
Try this tutorial: Youtube/watch?v=xsn6co4Ve6M
I had the same problem as you but with the tutorial from this link i could root my desire 820
gfb_vie said:
Try this tutorial: Youtube/watch?v=xsn6co4Ve6M
I had the same problem as you but with the tutorial from this link i could root my desire 820
Click to expand...
Click to collapse
Nope, I had the same problem. It reboots straight back into Fastboot. It's starting to look like I'll never root this phone
I think I screwed up. I double-checked and I suspect my phone may be the dual-sim 820. I followed all the instructions for the dual-sim and it still isn't working - when I press recovery it reboots into Fastboot. What do I do?
Hello xda community,
I have a serious problem, as per title, with my beloved Z00D device.
I unlocked the bootloader and struggled for over three hours to let it get TWRP Recovery.
Once finally done, I moved on to flash the RussianBear CFW.
Sadly, at the end of the installation, it gave an error I had no time to write down (E: unable to mount, is what i can remember).
Since then it is stuck on the Intel Inside logo an reboots every few minutes just to go back to the same logo.
Holding volume up while powering won't open the bootloader, giving a usb logo instead.
Holding volume down render absolutely nothing.
I tried to follow an umbricking guide already that uses xFSTK. This program doesn't even start when prompted. So I'm officially stuck and with no cellphone. Abroad. Alone.
Help?
silly question did you open app as administrator?
You can do it as you are on the right road, just search and look for CHuvaCK21 advice and raw firmware.
Start here: hxxp://4pda.ru/forum/index.php?showtopic=657946&st=1160#entry46287238
In the end please make a tutorial for others as it could be useful some day ...
relu666 said:
You can do it as you are on the right road, just search and look for CHuvaCK21 advice and raw firmware.
Start here: hxxp://4pda.ru/forum/index.php?showtopic=657946&st=1160#entry46287238
In the end please make a tutorial for others as it could be useful some day ...
Click to expand...
Click to collapse
I'm afraid two main issues will pop up.
First of all, I can't access the device's bootloader to push a stock recovery in it.
The second is a simple and plain problem: I can't understand russian nor russian alphabet.
I moved on to flash the RussianBear CFW. :P[/QUOTE said:
Too late to speak about Russian alphabet and being afraid now
Use your common sense, google translate and go on as nobody can do it in your place.
Click to expand...
Click to collapse
Same problem man, what did you do? please help me
Dear All,
I've found that my bootloader is automatically Locked after flashing Marshmallow Beta. So, I've tried to unlock it again to bring back my TWRP, but both official and unoffiacial methods failed to unlock and even temporary CWM also didn't work. Then I've flashed .139 droidboot image though fastboot and tried unofficial unlock method and got unlocked. Then I've flashed TWRP and got it worked.
Now I've flashed Supersu 2.65 through TWRP and rebooted my phone..... OMG, I've bricked my phone.... There is no display at all (Black Screen), but getting vibration at the Power On.
I've tried all the unbrick methods including xFSTK Tool method! But no use... I've used these methods previously to unbrick from USB Logo Issue. But now, it's refusing to help me...
It shows in xFSTK as like this...
Firmware download completed. Continuing to OS...
Click to expand...
Click to collapse
But it fails download OS after many attempts to reconnect my device. Then my device reboots (gives vibration) but nothing is displayed in the screen and it is still blank. It's not even booting to bootloader...
Kindly suggest me some tips to unbrick my phone (Z00AD-ZE551ML)....
Thanks in advance...
Edit: Sorry for the title mistake, it's Beta Update....
argggghhh ! now i understand where you went wrong relating to this
http://forum.xda-developers.com/showpost.php?p=67378070&postcount=88
too late now but your first paragraph ....
(........Dear All,
I've found that my bootloader is automatically Locked after flashing Marshmallow Beta. So, I've tried to unlock it again to bring back my TWRP, but both official and unoffiacial methods failed to unlock and even temporary CWM also didn't work. Then I've flashed .139 droidboot image though fastboot and tried unofficial unlock method and got unlocked.>>>>> Then I've flashed TWRP and got it worked......)
You should`ve flashed stock recovery for 139 -- then rebooted recovery -- select side load -- then adb sideloaded WW - stock 139 firmware.
i dont know where you go from here , if you do manage it, remember this ^^^ and anyone else --- i put this process numerous times but people just ignore !
possibly start again and try flash raw for 139 and correct the steps ^^^?
timbernot said:
possibly start again and try flash raw for 139 and correct the steps ^^^?
Click to expand...
Click to collapse
But from where I can start? There is no fastboot and no display at all... I'm struggling where to start...
ponnuvelpandian said:
But from where I can start? There is no fastboot and no display at all... I'm struggling where to start...
Click to expand...
Click to collapse
You are bricked my friend
Until , dnx and ifwi and os image for 6 comes about...
Find out how to extract them from the 61 firmware from marshmallow ?
Oh and the raw too .
Maybe , put here for others to use .
Come back and let us know how you go ?
timbernot said:
You are bricked my friend
Until , dnx and ifwi and os image for 6 comes about...
Find out how to extract them from the 61 firmware from marshmallow ?
Oh and the raw too .
Maybe , put here for others to use .
Come back and let us know how you go ?
Click to expand...
Click to collapse
I've already extracted dnx and ifwi from 61 firmware. But don't know how to convert droidboot.img to .bin...
But, I've tried to download dnx and ifwi extracted from 61 firmware, but it doesn't go well...
Edit 2: -but the same extracted from .184 firmware goes well..... But still no display at all...
Edit 1: Attachment....
Edit 2: -but the same extracted from .184 firmware goes well.....
goes well ?
what do you mean here ?
timbernot said:
Edit 2: -but the same extracted from .184 firmware goes well.....
goes well ?
what do you mean here ?
Click to expand...
Click to collapse
I mean it's getting flashed (only ifwi & dnx) but still no boot at all as like said at the OP... But the ifwi & dnx taken from .61 firmware is not at all flasing...
ponnuvelpandian said:
I mean it's getting flashed (only ifwi & dnx) but still no boot at all as like said at the OP... But the ifwi & dnx taken from .61 firmware is not at all flasing...
Click to expand...
Click to collapse
ok , have you just tried naming the droidboot.img to droidboot.img.bin ---longshot i know but trying to research this a little myself -- this is for another phone with an older downloader but maybe some clues here ...
http://onehallyu.com/topic/294288-a-fluke-that-save-my-phone-fonepad-7fe171cg-from-hard-brick/
timbernot said:
ok , have you just tried naming the droidboot.img to droidboot.img.bin ---longshot i know but trying to research this a little myself -- this is for another phone with an older downloader but maybe some clues here ...
http://onehallyu.com/topic/294288-a-fluke-that-save-my-phone-fonepad-7fe171cg-from-hard-brick/
Click to expand...
Click to collapse
Ya, I tried that too by renaming droidboot.img to droidboot.img.bin and tried it. But still as like before it's not even going to OS section after finishing the firmware section... So, I cant come to a conclusion that whether renaming like this is correct or not...
OK, all you can do is wait for people with more understanding than me on this topic ...apols ..
timbernot said:
OK, all you can do is wait for people with more understanding than me on this topic ...apols ..
Click to expand...
Click to collapse
OK my friend, I' waiting.... and I really thank you very much for your kind interest in solving my issue......
ponnuvelpandian said:
OK my friend, I' waiting.... and I really thank you very much for your kind interest in solving my issue......
Click to expand...
Click to collapse
I did read somewhere that letting the battery discharge itself completely --then try. Then try a fullcharge after , if not -- infact i`d try battery disconnect too lol but thats just me .
good luck and put what you find here :good:
---------- Post added at 11:01 AM ---------- Previous post was at 10:28 AM ----------
ponnuvelpandian said:
OK my friend, I' waiting.... and I really thank you very much for your kind interest in solving my issue......
Click to expand...
Click to collapse
Out of curiosity can you post a screenshot of the extracted ifwi that you have ?
Have you tried pressing (and holding) the "vol-up" button immediately after the "fw download completed continuing to os.."?
That's how I managed so the phone didn't reboot
pecholino said:
Have you tried pressing (and holding) the "vol-up" button immediately after the "fw download completed continuing to os.."?
That's how I managed so the phone didn't reboot
Click to expand...
Click to collapse
Yes, I also did it some times to try to go to bootloader, but didn't work...
timbernot said:
I did read somewhere that letting the battery discharge itself completely --then try. Then try a fullcharge after , if not -- infact i`d try battery disconnect too lol but thats just me .
good luck and put what you find here :good:
---------- Post added at 11:01 AM ---------- Previous post was at 10:28 AM ----------
Out of curiosity can you post a screenshot of the extracted ifwi that you have ?
Click to expand...
Click to collapse
These are the files I've taken from the ifwi.zip inside the Stock ROM Beta.....
timbernot said:
I did read somewhere that letting the battery discharge itself completely --then try. Then try a fullcharge after , if not -- infact i`d try battery disconnect too lol but thats just me . good luck and put what you find here :good:
Click to expand...
Click to collapse
But I've already opened my phone and tried disconnecting and reconnecting the battery to test. But it didn't helped me...
================================================================================================================
And this is the exact mistake I've did I think which they asked no to do....
What we know so far:
* DO NOT flash droidboot.img in Android 6.0 update when ifwi version is 94.17x
* The bootloader will be ' locked ' after flashing Android 6.0 update.
* The splashscreen of Android 5.0 and Android 6.0 are in different format and if you don't update after changing the ifwi version, your phone might not boot.
Click to expand...
Click to collapse
Which is stated clearly at ZenTalk forum here http://www.asus.com/zentalk/thread-79657-1-1.html
But I've flashed droidboot.img from .139 firmware over Android M Beta... This made the splashscreen not to work and my phone became unbootable...
But the sad thing is, I was really not aware of this before doing this to my phone...
Edit: Now the clue is splashscreen, is there any way to flash splashscreen using a downloader like xFSTK...?
Where to use it What is OS Dnx in xFSTK Downloader? Can I use splashscreen there?
ponnuvelpandian said:
But I've already opened my phone and tried disconnecting and reconnecting the battery to test. But it didn't helped me...
================================================================================================================
And this is the exact mistake I've did I think which they asked no to do....
Which is stated clearly at ZenTalk forum here http://www.asus.com/zentalk/thread-79657-1-1.html
But I've flashed droidboot.img from .139 firmware over Android M Beta... This made the splashscreen not to work and my phone became unbootable...
But the sad thing is, I was really not aware of this before doing this to my phone...
Edit: Now the clue is splashscreen, is there any way to flash splashscreen using a downloader like xFSTK...?
Where to use it What is OS Dnx in xFSTK Downloader? Can I use splashscreen there?
Click to expand...
Click to collapse
Well theres hope for you yet , i did just that what you did and bricked my fone a couple of hrs ago - i managed to get working bootloader using ifwi dnx fwr and droidbootPOSsignedbin for version 2.15.40.13 and the raw for it -it flashed like fastboot messages on fone and rebooted into system all by itself
just upgating now , leaving 5.0 stock till mm comes ota
ps , tried 3 times and 3 bricks - cycling between 4 colours - usb cable - bootloader - and blank screens -each time i tried the raw -- soon as i ticked the wipe data in raw flasher it took.
remember i was coming from mm beta
timbernot said:
Well theres hope for you yet , i did just that what you did and bricked my fone a couple of hrs ago - i managed to get working bootloader using ifwi dnx fwr and droidbootPOSsignedbin for version 2.15.40.13 and the raw for it -it flashed like fastboot messages on fone and rebooted into system all by itself
just upgating now , leaving 5.0 stock till mm comes ota
ps , tried 3 times and 3 bricks - cycling between 4 colours - usb cable - bootloader - and blank screens -each time i tried the raw -- soon as i ticked the wipe data in raw flasher it took.
remember i was coming from mm beta
Click to expand...
Click to collapse
Have you ever went up with the blank screen issue? (like me..)...
Edit 1: I forgot to mention one thing in the OP. After unlocking my phone with .139 droidboot.img, I got white splashscreen, then I've flashed black splashscreen (older one that I already had for LP).... I think this may be the issue...
Edit 2: Which RAW Flasher you are using to recover from blank screen?
I used 2.15.40.13 raw with the only flasher available I think 1.7
Downloader,1.14 cos it worked for me before, I have 1.34 but never used and didn't want to alter my successful flash stuff
Dear @timbernot
Thank you very much for giving me hope to unbrick my phone. Now I've unbricked it successfully by trying with xFSTK again and again repeatedly.... First I got the USB Logo, then four colours, and then fastboot.... Then I've flashed the raw firmware.... Feeling happy now....