Develop Bugs

Bootloader version & serial number

when i am flashing the pre rooted img in bootloader screen.
I notice that the bootloader version is 'unknown', and the serial number is 0123456789ABCDEF
do you see the same? is it normal?
Thanks.

laidick said:
when i am flashing the pre rooted img in bootloader screen.
I notice that the bootloader version is 'unknown', and the serial number is 0123456789ABCDEF
do you see the same? is it normal?
Thanks.
Click to expand...
Click to collapse
YES I see the same... but whether it is normal or abnormal I don't know..

thanks. just to confirm if i am the only one seeing this

laidick said:
thanks. just to confirm if i am the only one seeing this
Click to expand...
Click to collapse
+1 and I have no recovery...
Got to recovery finally...
I pushed power button and continually pressed up volume until recovery came up while the little sleeping android was on screen with "Error! displaying beneath... What a mongrel to get to recovery...

Same here

same problem as you
gopzzz said:
YES I see the same... but whether it is normal or abnormal I don't know..
Click to expand...
Click to collapse
Hi there
I am facing the same situation as you, so have you found a solution that solved your bootloader problem? If you have please let me know so I can fix my asus zenfone 2 too.
---------- Post added at 06:36 PM ---------- Previous post was at 06:28 PM ----------
laidick said:
when i am flashing the pre rooted img in bootloader screen.
I notice that the bootloader version is 'unknown', and the serial number is 0123456789ABCDEF
do you see the same? is it normal?
Thanks.
Click to expand...
Click to collapse
I am facing the situation as you with my asus zenfone 2. Did you happen to figure out a way to fix it? If you have please let me know because no matter how much I try to get into recovery mode I cannot seem to get pass that little green android figure with the error letters. And sometimes I get quick flashes of "error" messages underneath the little green android figure but it never takes me to the recovery menu.

Same here! Any news?

JuStAdsor said:
Same here! Any news?
Click to expand...
Click to collapse
Unlocked bootloader and don't give a damn anymore...

ultramag69 said:
Unlocked bootloader and don't give a damn anymore...
Click to expand...
Click to collapse
And what about Ota?
Do you receive the notification?
Trimis de pe al meu ZenFone 2 folosind Tapatalk

JuStAdsor said:
And what about Ota?
Do you receive the notification?
Trimis de pe al meu ZenFone 2 folosind Tapatalk
Click to expand...
Click to collapse
Yep.
As for root, I flash the pre-rooted rom by Shakalaka, latest of course, and then let it update normally with OTA after the pre-rooted rom flash(do this by fastboot).
Never had an issue with bootloops. Might be a bit more work but if I haven't altered the system files, added busybox or xposed framework, I don't need to reflash the pre-rooted rom. Just like being cautious.

hanzho80 said:
Hi there
I am facing the same situation as you, so have you found a solution that solved your bootloader problem? If you have please let me know so I can fix my asus zenfone 2 too.
---------- Post added at 06:36 PM ---------- Previous post was at 06:28 PM ----------
I am facing the situation as you with my asus zenfone 2. Did you happen to figure out a way to fix it? If you have please let me know because no matter how much I try to get into recovery mode I cannot seem to get pass that little green android figure with the error letters. And sometimes I get quick flashes of "error" messages underneath the little green android figure but it never takes me to the recovery menu.
Click to expand...
Click to collapse
Once you get to that screen, press and hold the power button, and quickly press and release the volume up button. You'll be taken into recovery mode

It appears for awhile for me but then some reset will go on like a blink and returns to normal serial ??

the same problem and without any soultion , after trying XFSTK now a 4 colours screen and then restart without serial no

Im in BIG problem... plz help
i have zenfone 2 ZE551ml.. while unbricking with xFSTK downloader.. serial number change into 0123456789abcdef
before flashing stock ROM .. it mistakenly typed "fastboot erase factory" and "erase config"
now i am not able to flash any ROM. even not able to recover serial number.
after flashing Stock ROM sceen stucks on Boot screen
plzz help mee with this
pplllzzz
thank you..

karanartbundele said:
i have zenfone 2 ZE551ml.. while unbricking with xFSTK downloader.. serial number change into 0123456789abcdef
before flashing stock ROM .. it mistakenly typed "fastboot erase factory" and "erase config"
now i am not able to flash any ROM. even not able to recover serial number.
after flashing Stock ROM sceen stucks on Boot screen
plzz help mee with this
pplllzzz
thank you..
Click to expand...
Click to collapse
Check my unbrick and correct serial video , note the two part flash in AFT , from 2:17 mins in into video.
Check my signature for unbricking thread and video and AFT download
PS , when serial is corrected , so will imei and recovery too
https://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064

How to repair the serial number
Pls....help ! What can I do to repair SN of my ZenFone 2
It was changed after install TWRP and back to stock rec.
I found it changed to C4ATAS000000
Pls help me...

Help!!! Android One Hard bricked!!

First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...

KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB

GokulNC said:
Flash the stock KitKat flash file...
I think there's some prob with Lollipop flash file.
ATB
Click to expand...
Click to collapse
I did it same problem...

KrishuFC said:
I did it same problem...
Click to expand...
Click to collapse
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.

GokulNC said:
Okay, try this:
Connect your phone and first, flash it in 'Download Only' mode. (Make sure to select all the partitions (I mean the files))
Then flash them all again in 'Firmware Upgrade' mode..
I'd recommend you to flash the KitKat file.
Click to expand...
Click to collapse
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //

KrishuFC said:
well yes I've done that too I flashed rom (both) in download only mode It was flashed successfully... but phone was still dead....
and in that firware upgrade mode its showing failed to get pmt info error...
any suggestion?? I searched on google and didnt find anything //
Click to expand...
Click to collapse
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there

GokulNC said:
Just read this: http://forum.xda-developers.com/showpost.php?p=53010118&postcount=647
That may help.. Don't download anything from there
Click to expand...
Click to collapse
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??

KrishuFC said:
well yeah I know PMT is somehow corrupt... and after doing format+download option there "pmt tabelle" isnt correcting its still damaged.... thats the real problem... Can u provide me the pmt file from mtk droid tools ??
Click to expand...
Click to collapse
Sorry, but I no longer have that phone
Just ask someone else.

GokulNC said:
Sorry, but I no longer have that phone
Just ask someone else.
Click to expand...
Click to collapse
Ok then! it seems nobody is gonna help me

KrishuFC said:
Ok then! it seems nobody is gonna help me
Click to expand...
Click to collapse
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them

GokulNC said:
Just go to some random threads in Canvas A1 forum and go to some active user's profile..
Find their FB ID and ask it from them
Click to expand...
Click to collapse
I'm trying!! lets hope

I also have same problem.. can anyone provide a solution

KrishuFC said:
First The system, data, cache wasnt mounting in twrp recovery!!
I wanted to wipe everything to install new rom so I flashed Lollipop Stock rom by munshi by sp flash tool 5.1424 version
I tried download that firmware all things was finished but device wasnt booting it was stopped at logo so I tried format+download option this everything was gone from my device its not even booting not even charging completly dead So I did a memory test and the result was nand flash wasnt detected everything was fine except that... btw yeah phone is detectable in pc but not booting I tried download many times it flashed everything still device isnt booting.....
plz. help!!
is there any way left except going to sc...
Click to expand...
Click to collapse
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]

Sagar Kapasi said:
:crying:
Bro Im Having The Exact Same Problem Please Get In Touch With Me So Together We Can Rectify The Problem
Facebook.com/sagarkapasi099
OR
[email protected]
Click to expand...
Click to collapse
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...

KrishuFC said:
It has been 2 months since I faced this problem now I don't use that mobile I bought Samsung j5 on Oct 17 and using it now...
Click to expand...
Click to collapse
So You Are Saying You Left That Phone Dead?

Sagar Kapasi said:
So You Are Saying You Left That Phone Dead?
Click to expand...
Click to collapse
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...

KrishuFC said:
Yes I tried too much to make it alive.. even gave it to a guy who's learning mobile repairing he and his whole team couldn't do it.... after so many efforts so I got frustrated and left it...
Click to expand...
Click to collapse
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!

Sagar Kapasi said:
What About Micromax Service Center???
Have You Been There????
I'm Thinking Of Going…!
Please Reply So I Can Make A Decision Regarding To Go To Service Center Or Not!:silly:
Thanx For The Reply.!
Click to expand...
Click to collapse
Yes give it a try why not you should go...

Need modified .tot for LS980

Hi everybody, is there any one who can give me a link of .tot modified file with hex editor, I flashed my phone (LS980) with wrong firmware (D802) and when I try to flash it with the right file wich is destined for LS980 the flash tool consider the phone as a D802 model, I tried all methods I found on XDA to restore my phone but nothing done, my phone still brick, and the only way to flash it now is to modify the .tot file with a hex editor soft, if there is someone who can give me a link to that file, or to show me the exact line to modify in the file and which hex soft to use it will be a great help for me.
Thank you in advance (Please try to give the help I demand, because I tried every methods)

Hello kakah2011, First of all i'd tell you to calm down its gonna be alright. secondly can you explain briefly the previous version of software you were running. Android version and the software version, if you could mention would be of great help. And did you flash D802 rom yourself, as if it were running LS980 previously or did you buy the phone already flashed with a fake D802 rom. I can guide and provide you on how to resolve the issue but first i need to make sure which partitions are flashed to your phones memory currently.

just relax. i had exactly the same issue and it got sorted out. My phone(hardware ls980) came with a fake 802 software on it. So i assumed its a 802 and flashed 802 roms on it till it completely got screwed up. the touch went crazy and the phone got into a auto restart loop.
I have the edited file, but i dont know how to give you a 2.5 gb file. Any ideas how it can be shared.
I edited the original file using flexhex. You just need to change the first instance of the word LS980 to D802. the trick here is that in hex editor format when we replace L with D , S with 8, 9 with 0, 8 with 2,0 we replace with a spacebar. The last parts a mistake. 0 should be replaced by a blank and not a spacebar. Copy a blank from nearby and insert it. or try a 00 value. I dont remember exactly what i did. but my mistake was that i was replacing the 0 with a space bar.
after the format, my phone stopped getting into the download mode. Instead i got stuck in some fastboot mode which was getting activated by using the volume up key while inserting the wire(before this, i was getting download mode in volume down+usb wire insertion). had to struggle a bit to get the phone back to download mode. I used something called adb tools to get this done. If you konw these tools, its just a 2 min job.
After that i reflashed the original tot file of ls980 and the phone started working great.
if you need anyhelp, call me if you are from india on 9700000678. Else pm here or email on [email protected]
dont forget to thank me.

megasamsid8 said:
Hello kakah2011, First of all i'd tell you to calm down its gonna be alright. secondly can you explain briefly the previous version of software you were running. Android version and the software version, if you could mention would be of great help. And did you flash D802 rom yourself, as if it were running LS980 previously or did you buy the phone already flashed with a fake D802 rom. I can guide and provide you on how to resolve the issue but first i need to make sure which partitions are flashed to your phones memory currently.
Click to expand...
Click to collapse
Thak you Mr, I think that the previous Firmware before I flash it was a LS980 (4.4.2 or 4.2.2), and I think that the version that I flashed the phone with is 16GB, and I can't use adb fastboot with PC to because it don't recorgnize the IMEI and the only way to restore it is the download mode (No Philz recovery) and I must notice that the screen is not normal (when I push it in an area it moves in another), I think that it's bricked for ever!!!!???

krunalkamdar said:
just relax. i had exactly the same issue and it got sorted out. My phone(hardware ls980) came with a fake 802 software on it. So i assumed its a 802 and flashed 802 roms on it till it completely got screwed up. the touch went crazy and the phone got into a auto restart loop.
I have the edited file, but i dont know how to give you a 2.5 gb file. Any ideas how it can be shared.
I edited the original file using flexhex. You just need to change the first instance of the word LS980 to D802. the trick here is that in hex editor format when we replace L with D , S with 8, 9 with 0, 8 with 2,0 we replace with a spacebar. The last parts a mistake. 0 should be replaced by a blank and not a spacebar. Copy a blank from nearby and insert it. or try a 00 value. I dont remember exactly what i did. but my mistake was that i was replacing the 0 with a space bar.
after the format, my phone stopped getting into the download mode. Instead i got stuck in some fastboot mode which was getting activated by using the volume up key while inserting the wire(before this, i was getting download mode in volume down+usb wire insertion). had to struggle a bit to get the phone back to download mode. I used something called adb tools to get this done. If you konw these tools, its just a 2 min job.
After that i reflashed the original tot file of ls980 and the phone started working great.
if you need anyhelp, call me if you are from india on 9700000678. Else pm here or email on [email protected]
dont forget to thank me.
Click to expand...
Click to collapse
Thank you Mr, If you can share the file it will be great, if you can't I will try to edit the file as you say, maybe it's the trick that I missed, will try it and tell you the result.Thank you Mr

krunalkamdar said:
just relax. i had exactly the same issue and it got sorted out. My phone(hardware ls980) came with a fake 802 software on it. So i assumed its a 802 and flashed 802 roms on it till it completely got screwed up. the touch went crazy and the phone got into a auto restart loop.
I have the edited file, but i dont know how to give you a 2.5 gb file. Any ideas how it can be shared.
I edited the original file using flexhex. You just need to change the first instance of the word LS980 to D802. the trick here is that in hex editor format when we replace L with D , S with 8, 9 with 0, 8 with 2,0 we replace with a spacebar. The last parts a mistake. 0 should be replaced by a blank and not a spacebar. Copy a blank from nearby and insert it. or try a 00 value. I dont remember exactly what i did. but my mistake was that i was replacing the 0 with a space bar.
after the format, my phone stopped getting into the download mode. Instead i got stuck in some fastboot mode which was getting activated by using the volume up key while inserting the wire(before this, i was getting download mode in volume down+usb wire insertion). had to struggle a bit to get the phone back to download mode. I used something called adb tools to get this done. If you konw these tools, its just a 2 min job.
After that i reflashed the original tot file of ls980 and the phone started working great.
if you need anyhelp, call me if you are from india on 9700000678. Else pm here or email on [email protected]
dont forget to thank me.
Click to expand...
Click to collapse
Thank you Mr I will try this trick and tell you if it work.Thinx

kakah2011 said:
Thank you Mr I will try this trick and tell you if it work.Thinx
Click to expand...
Click to collapse
It's a great trick that show me, but the problem now is that the phone stay on the LG logo, and not detected by fastboot tool on my pc (I installed drivers for adb), I think that the serial number is lost, and I can't start the phone normaly.
Any help thank you

kakah2011 said:
It's a great trick that show me, but the problem now is that the phone stay on the LG logo, and not detected by fastboot tool on my pc (I installed drivers for adb), I think that the serial number is lost, and I can't start the phone normaly.
Any help thank you
Click to expand...
Click to collapse
I done as you said, the phone is detected on the PC but the problem is that I don't know which part must I flash in order to get back the "Download Mode", can you help me ? Thank you

Follow this tutorial to flash all your partitions..
http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
erasing and flashing these files will make download mode work again.
Keep us updated with the progress.
Goodluck
Btw g2 never gies its a tough champ keep your hopes high

megasamsid8 said:
Follow this tutorial to flash all your partitions..
http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
erasing and flashing these files will make download mode work again.
Keep us updated with the progress.
Goodluck
Btw g2 never gies its a tough champ keep your hopes high
Click to expand...
Click to collapse
Is there any method to flash the .tot file firmware using fastboot? because there is no more download mode after flashing the modified firmware using FlexHex. Any suggestion ?

kakah2011 said:
Is there any method to flash the .tot file firmware using fastboot? because there is no more download mode after flashing the modified firmware using FlexHex. Any suggestion ?
Click to expand...
Click to collapse
The .tot can only be flashed in download mode, on a serious note i'd suggest you here to give your phone to some expert it wouldn't cost you much. But if you'd like to follow.. download mode can easily be restored using the method in the link i just provided earlier. When you get into download mode only then your rom can be restored.. btw please follow as instructed cause if something wrong goes here eg flashing wrong image in fastboot or wiping all at once.. could lead the phone to hard brick and would cost you double as much later to get it fixed. My personal suggestion is to pay $15-30 for this operation and get it over with.. do you have any suitable repair shops in your area?

When I attempt to flash some parts of the downloaded ZVE partition file it gives me an that there is an error in the partition

kakah2011 said:
When I attempt to flash some parts of the downloaded ZVE partition file it gives me an that there is an error in the partition
Click to expand...
Click to collapse
First I want to thank every one who helped me to restore my G2(especially Krunal Jain who shows me the first step which is the key), finally you've just to download the LAF file and flash it in order to get back download mode then you can flash the .tot firmware of the LS980.
The prbleme now is that there is no more adresse MAC when entering to Wifi settings, and also Cellular network, I guess that these two things need a lot of search to restore them !! Any suggestion??? THANK YOU GUYS

kakah2011 said:
First I want to thank every one who helped me to restore my G2(especially Krunal Jain who shows me the first step which is the key), finally you've just to download the LAF file and flash it in order to get back download mode then you can flash the .tot firmware of the LS980.
The prbleme now is that there is no more adresse MAC when entering to Wifi settings, and also Cellular network, I guess that these two things need a lot of search to restore them !! Any suggestion??? THANK YOU GUYS
Click to expand...
Click to collapse
So is your device powered on now ? CHEERS... and yes LS980 is sprint locked so you've to follow the unlock method to get gsm on your phone. its easy.. good job mate.. Root your phone and follow here to network unlock ZVE .. should work on ZVE http://forum.xda-developers.com/showthread.php?t=2655133
Goodluck

I need some help also
My lg g2 was also a refurbished one and comes with fake d802 software which make a mes for me. As i flash lollipop from offcial lg flashtool. The screen goes erratic but then i discovered it is a refurbished model and brought my phone to shop for repair. Person thier flash ls980 rom as the model is ls980 from board. touch screen start working but no sim. When i insert sim it gives error com.phone.android stopped.and the person who flashed rom says that your emmc is damaged.what to do now guys plz help and the messaging app also give force close error

megasamsid8 said:
So is your device powered on now ? CHEERS... and yes LS980 is sprint locked so you've to follow the unlock method to get gsm on your phone. its easy.. good job mate.. Root your phone and follow here to network unlock ZVE .. should work on ZVE http://forum.xda-developers.com/showthread.php?t=2655133
Goodluck
Click to expand...
Click to collapse
Is it normal that when I press *#06# it shows anything ? but when I go to settings I find the IMEI!!!
Before I proceed to Unlock I must fix the IMEI, and in order to fix it I need root, I tried ioroot but it shows many errors !!!
Thank you

kakah2011 said:
Is it normal that when I press *#06# it shows anything ? but when I go to settings I find the IMEI!!!
Before I proceed to Unlock I must fix the IMEI, and in order to fix it I need root, I tried ioroot but it shows many errors !!!
Thank you
Click to expand...
Click to collapse
When I enter "About Phone", "Status" it shows ICCID and IMSI "Unknown" is there any solution to fix it ?
Thank you guys

hello kakah i had the same issue few hours ago with my LS980, cant access download mode cz i flashed wronge fal, aboot & boot , of d802
now im stuck on bootloop
could you help me please
i'm from Staoueli -ALgiers
thanks in advance

nadjib_unreal said:
hello kakah i had the same issue few hours ago with my LS980, cant access download mode cz i flashed wronge fal, aboot & boot , of d802
now im stuck on bootloop
could you help me please
i'm from Staoueli -ALgiers
thanks in advance
Click to expand...
Click to collapse
holla amigo im from algeria to
now i have the same prob as u ! so could we help each other to get it worked again :/

benniche farid said:
holla amigo im from algeria to
now i have the same prob as u ! so could we help each other to get it worked again :/
Click to expand...
Click to collapse
Hello brother
I fixed mine yesterday, i ll tell what to do
If you want to get access to download mode, just remove the buttons connector ,then that metalic plat that its glued in just to get access tothe ic chip and motherboard , of course to do this u need to takr off the baterry and all connectors, once u takr off yhe buttons reconnect every connwctor except the one of buttons and baterry
Thrn connect the the phone to the pc by using a usb (without baterry) then u need a liyyle screw driver or a wire to short the capacitor c5000 and c5004, keep trying till u heard thr pc detect new device named qhusb
Great , for that you need to download srk tool 2.1 just google it
Then selectfix utility then unbrick qhusb and select the correct drive
It will flash : haf, boot , aboot
Thats good for now ur download mode is back to life
Then for ls980 u need to install stock tot file (ls890zv7.tot) flash it with lg flash tool use manual mode u need a dll file (lgls980_20130904_lgflashv151.dll) download it on google... i ll send you links later hiw to do this,im using my phone
Once finished , ur phone is back to life but no signal
Easy ,just need to root. Then install twrp recovery
After that u need to install via recovery mode the (ls980stockuniversal to d802.zip)
And u re phone is getting signal and being fixed
edit: here the tutorial links that helps ya how to do everything
1- to get your phone alive ( to be detected as qusb_bulk)
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
2- this to fix the qusb issue & download mode back to life
https://www.youtube.com/watch?v=ERZvlJIC9dE
3- to install the stock tot rom , Root , then install twrp recovery mode , & then full unlock you cell phone
https://www.youtube.com/watch?v=FGQ2aGlumWs
http://forum.xda-developers.com/sprint-g2/general/sprint-lg-g2-ls980-100-unlock-tm-att-t3188248

Phone stuck on LG start up

Hi, I have cynogen installed and all was working fine until this morning, noticed my phone appeared to be booting up, gets to the blue circle then goes black and goes back to the LG screen, then repeats. Ive never been able to get into recovery by pressing the power and vol button and have tried numerous times with no joy. I know i can boot into recovery using ADB but the phones needs to be on doesnt it? Is there any other way that I can do this? Please help been with out my phone all day! Feel lost lol

foxguard said:
Hi, I have cynogen installed and all was working fine until this morning, noticed my phone appeared to be booting up, gets to the blue circle then goes black and goes back to the LG screen, then repeats. Ive never been able to get into recovery by pressing the power and vol button and have tried numerous times with no joy. I know i can boot into recovery using ADB but the phones needs to be on doesnt it? Is there any other way that I can do this? Please help been with out my phone all day! Feel lost lol
Click to expand...
Click to collapse
you could do 2 things.. one download KDZ use LGUP flash it and see if it was software related or something went wrong at flash.. if it keeps doing it then it has the bootloop issue.. and need to be sent back for repair....can you provide your first 3 digits of your serial number...?

raptorddd said:
you could do 2 things.. one download KDZ use LGUP flash it and see if it was software related or something went wrong at flash.. if it keeps doing it then it has the bootloop issue.. and need to be sent back for repair....can you provide your first 3 digits of your serial number...?
Click to expand...
Click to collapse
Thank you, will look at this kdz, is it simple to use?
it has been working fine on cynogen for last few months, nor changed anything
s/n is 508

foxguard said:
Thank you, will look at this kdz, is it simple to use?
it has been working fine on cynogen for last few months, nor changed anything
s/n is 508
Click to expand...
Click to collapse
yes it is its pretty easy... . file is big though... download kdz for you variant.. what android you are using.? MM or were you on stock LP.?
well i think since your phone is from 2015 august. that bootloop was supposed to be fixed by then. but newer phone are still getting hit by the bootloop.. but be aware unlocking the bootloader voids warranty.. some been lucky that phone were repaired some were denied repair..

raptorddd said:
yes it is its pretty easy... . file is big though... download kdz for you variant.. what android you are using.? MM or were you on stock LP.?
well i think since your phone is from 2015 august. that bootloop was supposed to be fixed by then. but newer phone are still getting hit by the bootloop.. but be aware unlocking the bootloader voids warranty.. some been lucky that phone were repaired some were denied repair..
Click to expand...
Click to collapse
Its been unlocked for ages and running the cyanogen rom, this is what is now stuck but was running fine. lg website doesnt have the programme any more, will hunt for it. so this will work even though phone doesnt boot?

foxguard said:
Its been unlocked for ages and running the cyanogen rom, this is what is now stuck but was running fine. lg website doesnt have the programme any more, will hunt for it. so this will work even though phone doesnt boot?
Click to expand...
Click to collapse
her it is..
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
here are the links but i think you got the BOOTLOOP problem that many been affected..
NO ...... the only way for your phone to boot and gather all data is to flash a moddedKDZ.. but am not sure if it works on your variant..
if you have warranty send it back...but if they find out its unlocked they may deny repair.. you must pay for it...
this will make it boot but it will make it slow. as it disables the main cores...
https://www.reddit.com/r/lgg4/comments/45gfg2/dae_g4_series_msm_big_core_disable_tool_guide/
read this post..
http://forum.xda-developers.com/g4/help/lg-g4-stuck-bootloop-t3268734

raptorddd said:
her it is..
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
here are the links but i think you got the BOOTLOOP problem that many been affected..
NO ...... the only way for your phone to boot and gather all data is to flash a moddedKDZ.. but am not sure if it works on your variant..
if you have warranty send it back...but if they find out its unlocked they may deny repair.. you must pay for it...
this will make it boot but it will make it slow. as it disables the main cores...
https://www.reddit.com/r/lgg4/comments/45gfg2/dae_g4_series_msm_big_core_disable_tool_guide/
read this post..
http://forum.xda-developers.com/g4/help/lg-g4-stuck-bootloop-t3268734
Click to expand...
Click to collapse
Going to give this a whirl now mate, thanks.

Zenfone2 ZE550ML Z008 No Sound call &Flash image failure (FAILED (wrong image format)

Zenfone2 ZE550ML Z008 No Sound call &Flash image failure (FAILED (wrong image format)
OK, after some search and trying, i really need more help from xda community, especially asus zenfone 2 ZE550ML user and developer and others too
so, this is whats happen so far:
i got this phone from my sister, asus zenfone 2 ZE550ML Z008 2GB memory with weird problem...
the phone cannot send/receive sound from phone calling.
the call can be made, but not any sound can be heard, in and out...
well, maybe the mic and speaker broken, i found that it is not the case...
why? because any messenger apps (Whatsapp, BBM, IMO, Line) which have voice call, worked just fine, no problem at all
i tried self test (using calulator .12345+= trick) everything working just fine too.
it happen too even when using earphone (which i already tested again worked fine with Whastapp, BBM, Line, IMO, maybe other apps too). the earphone is fine, normal and working OK
i tried doing factory reset, failed, after some search, for anything that can be done, it said disable ok google detection, turn ON dial pad, update asus call screen, etc,
let me know if there is more things to try...
i also already try wipe factory reset and cache from recovery mode, still no luck...
i also find that the SIM2 IMEI is unknown/null, but SIM 1 IMEI still normal...
tried changing to SIM 2, and as expected, it didnt get any signal, so cannot be used
i tried all OTA update to the latest update, and the problem still exist
so i think i should flash using Asus Flash Tools (AFT) using flash raw file so it can fix this problem, to make the phone really like new again...
but, another problem arise...
i already prepare all driver and AFT and raw file...
in device manager, everything fine, no any yellow/red mark to any device...
boot to fastboot mode, connect the usb cable, detected in AFT and status is connected with blue circle.
but i cannot flash when i click start, after a while, yellow circle, then red circle with note "Flash image failure (FAILED (wrong image format))"
it failed and not flash the phone, the phone can still be used normal like nothing
happen (but still with the problem i mention )
OK, maybe, the file i downloaded corrupted, so i download again few times, but it keep showing the same error
"Flash image failure (FAILED (wrong image format))"
i tried download other version, and error still the same
i also tried different version of AFT from 1.0.0.14 until the latest one, 1.0.0.55 , and still same error...
i am sure my phone is ZE550ML since in the back of the phone there is written Model : ASUS_Z008, or am i wrong??
after that, i tried flash using ADB and zip file from asus site, with the most older file, which is "UL-Z008-WW-2.12.40.9-user.zip" but cannot be done, it is said cannot flash with older version than the current firmware
so i download the latest firmware "UL-Z008-WW-4.21.40.191-user.zip" which is marsmellow, hoping my problem can be fix
but, the problem still exist...really exactly the same way...really confusing
tried self test again, yup, 100% still the same problem...
so now, i need advice and any info, how to flash using AFT and raw file...??
or how to fix the "Flash image failure (FAILED (wrong image format))" error.
FYI, this phone still not root or unlock bootloader (i suppose, because my sister just use it as it is)
but i notice in fastboot mode, the "BOOTLOADER VERSION - Unknown" is it mean it already unlock or what??
Please help me, any advice, suggestion or info highly appreciated...
thx, and sorry for the poor english writing

kim7tng said:
OK, after some search and trying, i really need more help from xda community,
especially asus zenfone 2 ZE550ML user and developer and others too
so, this is whats happen so far:
i got this phone from my sister, asus zenfone 2 ZE550ML Z008 2GB memory with weird
problem...
the phone cannot send/receive sound from phone calling.
the call can be made, but not any sound can be heard, in and out...
well, maybe the mic and speaker broken, i found that it is not the case...
why? because any messenger apps (Whatsapp, BBM, IMO, Line) which have voice call,
worked just fine, no problem at all
i tried self test (using calulator .12345+= trick) everything working just fine too.
i tried doing factory reset, failed, after some search, for anything that can be
done, it said disable ok google detection, turn ON dial pad, update asus call screen,
etc,
let me know if there is more things to try...
i also already try wipe factory reset and cache from recovery mode, still no luck...
i also find that the SIM2 IMEI is unknown/null, but SIM 1 IMEI still normal...
tried changing to SIM 2, and as expected, it didnt get any signal, so cannot be used
i tried all OTA update to the latest update, and the problem still exist
so i think i should flash using Asus Flash Tools (AFT) using flash raw file so it can
fix this problem, to make the phone really like new again...
but, another problem arise...
i already prepare all driver and AFT and raw file...
in device manager, everything fine, no any yellow/red mark to any device...
boot to fastboot mode, connect the usb cable, detected in AFT and status is connected
with blue circle.
but i cannot flash when i click start, after a while, yellow circle, then red
circle with note "Flash image failure (FAILED (wrong image format))"
it failed and not flash the phone, the phone can still be used normal like nothing
happen (but still with the problem i mention )
OK, maybe, the file i downloaded corrupted, so i download again few times, but it
keep showing the same error
"Flash image failure (FAILED (wrong image format))"
i tried download other version, and error still the same
i also tried different version of AFT from 1.0.0.14 until the latest one, 1.0.0.55 ,
and still same error...
i am sure my phone is ZE550ML since in the back of the phone there is written Model :
ASUS_Z008, or am i wrong??
after that, i tried flash using ADB and zip file from asus site, with the most older
file, which is "UL-Z008-WW-2.12.40.9-user.zip" but cannot be done, it is said cannot
flash with older version than the current firmware
so i download "UL-Z008-WW-4.21.40.191-user.zip" which is marsmellow, hoping my
problem can be fix
but, the problem still exist...really exactly the same way...really confusing
tried self test again, yup, 100% still the same problem...
so now, i need advice and any info, how to flash using AFT and raw file...??
or how to fix the "Flash image failure (FAILED (wrong image format))" error.
FYI, this phone still not root or unlock bootloader (i suppose, because my sister
just use it as it is)
but i notice in fastboot mode, the "BOOTLOADER VERSION - Unknown" is it mean it
already unlock or what??
Please help me, any advice, suggestion or info highly appreciated...
thx, and sorry for the poor english writing
Click to expand...
Click to collapse
are you on M firmware ?
If yes ,factory reset in settings first
Then search ASUS support for downgrade to LP firmware for Z008(whatever that is)
put on internal sd or dload straight there. Remove ext sd btw before and
Reboot
See if that fixes your probs
edit just seen you cannot factory reset. What does work , lets start with that ?
What firmware are you currently on ?
Date build etc ?
Stock recovery installed ?

timbernot said:
are you on M firmware ?
If yes ,factory reset in settings first
Then search ASUS support for downgrade to LP firmware for Z008(whatever that is)
put on internal sd or dload straight there. Remove ext sd btw before and
Reboot
See if that fixes your probs
edit just seen you cannot factory reset. What does work , lets start with that ?
Click to expand...
Click to collapse
yes, i am on M firmware now
since i cannot flash using AFT, i tried using adb fastboot mode, and now i am on Marshmellow...
i can do factory reset, i do it few times already in backup setting and also in recovery mode...
it just that my problem/issue with No Sound when calling is still happening.
and the IMEI on SIM 2 also still unknown/null, altough this is less priority than the first problem

kim7tng said:
yes, i am on M firmware now
since i cannot flash using AFT, i tried using adb fastboot mode, and now i am on Marshmellow...
i can do factory reset, i do it few times already in backup setting and also in recovery mode...
it just that my problem/issue with No Sound when calling is still happening.
and the IMEI on SIM 2 also still unknown/null, altough this is less priority than the first problem
Click to expand...
Click to collapse
Can you factory reset in settings
Have you got stock recovery ??
You have to bare with me , my pc is upgrading and it has all my links on it
---------- Post added at 11:54 AM ---------- Previous post was at 11:42 AM ----------
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550ML/UL-Z008-WW-52.20.40.156-user.zip
If you have stock recovery.
Download this to ext sd .
In file manager , click rename and add an extra .zip on the end ,save and reboot phone
Eg>
UL-WW- bla bla user.zip.zip

timbernot said:
What firmware are you currently on ?
Date build etc ?
Stock recovery installed ?
Click to expand...
Click to collapse
i am on stock rom, android version 6.0.1
security pacth level January 1, 2017
Baseband 1603_5.0.68.9_0810
kernel version 3.10.72-x86_64_moor-gc9c9751
build number MMB29P.WW-ASUS_Z008-4.21.40.191_20161216_7769_user060020736_201603210001
still in stock recovery because i wanna make this still just like new without any mod

kim7tng said:
i am on stock rom, android version 6.0.1
security pacth level January 1, 2017
Baseband 1603_5.0.68.9_0810
kernel version 3.10.72-x86_64_moor-gc9c9751
build number MMB29P.WW-ASUS_Z008-4.21.40.191_20161216_7769_user060020736_201603210001
still in stock recovery because i wanna make this still just like new without any mod
Click to expand...
Click to collapse
Then do as advised earlier , I linked downgrade version for you

timbernot said:
Can you factory reset in settings
Have you got stock recovery ??
You have to bare with me , my pc is upgrading and it has all my links on it
---------- Post added at 11:54 AM ---------- Previous post was at 11:42 AM ----------
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550ML/UL-Z008-WW-52.20.40.156-user.zip
If you have stock recovery.
Download this to ext sd .
In file manager , click rename and add an extra .zip on the end ,save and reboot phone
Eg>
UL-WW- bla bla user.zip.zip
Click to expand...
Click to collapse
yes, i think i am on stock recovery, since i never flash anything except file from asus.com named "UL-Z008-WW-4.21.40.191-user.zip"
i am downloading it, using my PC.
isnt it already in .zip files?? do i need add to become "UL-Z008-WW-52.20.40.156-user.zip.zip" ??

kim7tng said:
yes, i think i am on stock recovery, since i never flash anything except file from asus.com named "UL-Z008-WW-4.21.40.191-user.zip"
i am downloading it, using my PC.
isnt it already in .zip files?? do i need add to become "UL-Z008-WW-52.20.40.156-user.zip.zip" ??
Click to expand...
Click to collapse
yes >
UL-Z008-WW-52.20.40.156-user.zip.zip
Is how it should read in file manager , you can add the .zip from pc on sd before inserting in phone too .
Reboot

timbernot said:
yes >
UL-Z008-WW-52.20.40.156-user.zip.zip
Is how it should read in file manager , you can add the .zip from pc on sd before inserting in phone too .
Reboot
Click to expand...
Click to collapse
isnt this firmware files to downgrade to Lollipop again from MM??
after downgrade, what should i do?? because i am guessing it will be the same one too...
but still i was hoping it can fix my problem...so ill do it anyway...
i thinking that flashing using AFT is the things that (maybe) can fix my problem...

kim7tng said:
isnt this firmware files to downgrade to Lollipop again from MM??
after downgrade, what should i do?? because i am guessing it will be the same one too...
but still i was hoping it can fix my problem...so ill do it anyway...
i thinking that flashing using AFT is the things that (maybe) can fix my problem...
Click to expand...
Click to collapse
Hows it going ?
You had probs flashing in AFT according to OP

timbernot said:
Hows it going ?
You had probs flashing in AFT according to OP
Click to expand...
Click to collapse
sorry for late update, have to do other things first...
so after i rename it to "UL-Z008-WW-52.20.40.156-user.zip.zip" and put in SD card,
when i turn it on, it tell me there is update from that file. well, so i OK'ed it and then it is "installing system update"
now it go back to android lollipop...and my problem still exist the exact same way...
still cannot hear sound in and out
SIM 2 IMEI still null/unknown
so, what should i do??
what is OP?? original poster, right?? thats me
btw, after updating back to lollipop, the phone still saying there is update

kim7tng said:
sorry for late update, have to do other things first...
so after i rename it to "UL-Z008-WW-52.20.40.156-user.zip.zip" and put in SD card,
when i turn it on, it tell me there is update from that file. well, so i OK'ed it and then it is "installing system update"
now it go back to android lollipop...and my problem still exist the exact same way...
still cannot hear sound in and out
SIM 2 IMEI still null/unknown
so, what should i do??
what is OP?? original poster, right?? thats me
btw, after updating back to lollipop, the phone still saying there is update
Click to expand...
Click to collapse
I think you can now rule out it being a software problem now
``btw, after updating back to lollipop, the phone still saying there is update``
Yes , is that the same file you just downgraded to or update to M ?

timbernot said:
I think you can now rule out it being a software problem now
``btw, after updating back to lollipop, the phone still saying there is update``
Yes , is that the same file you just downgraded to or update to M ?
Click to expand...
Click to collapse
so it is hardware problem??
but how?? the mic and speaker still can be use in Whatsapp, BBM and other chat apps just fine when voice call...
in selftest, i confirm it can pass, since i hear from speaker and speak through the mic just fine too...
and also i found that, if i record the call, it file cannot be played back, and yet i can record when not calling using sound recording and the file can played to just fine...
it only cannot hear or receive sound when in calling...
now, the things i not done is flashing using AFT, which cannot be done because the wrong image error...
i wonder, why?? there must be something i miss out

kim7tng said:
so it is hardware problem??
but how?? the mic and speaker still can be use in Whatsapp, BBM and other chat apps just fine when voice call...
in selftest, i confirm it can pass, since i hear from speaker and speak through the mic just fine too...
and also i found that, if i record the call, it file cannot be played back, and yet i can record when not calling using sound recording and the file can played to just fine...
it only cannot hear or receive sound when in calling...
now, the things i not done is flashing using AFT, which cannot be done because the wrong image error...
i wonder, why?? there must be something i miss out
Click to expand...
Click to collapse
AFAIK -- you would not be allowed to downgrade if something was a miss with current software(pre-flash) of the downgrade version.
Although , i would try 1.17 AFT in my unbrick thread in my signature below -- and check that you are flashing in AFT correctly by checking unbrick video from 2:17 mins in where AFT flash begins .
I did read in another thread that you stated your serial number is OK .
When you connect in AFT if serial is corrected you flash once.
If serial is 0-F, this is incorrect and you need to do a 2 part flash in AFT to correct it.
Watch the video carefully from 2:17 mins see if you are not doing something right !
Ps , are you flashing a raw file in AFT ?

Out of curiosity, what was the file you tried to flash with the asus flash tool? Was it a raw file?
Sent from my ASUS_Z00A using Tapatalk

timbernot said:
AFAIK -- you would not be allowed to downgrade if something was a miss with current software(pre-flash) of the downgrade version.
Although , i would try 1.17 AFT in my unbrick thread in my signature below -- and check that you are flashing in AFT correctly by checking unbrick video from 2:17 mins in where AFT flash begins .
I did read in another thread that you stated your serial number is OK .
When you connect in AFT if serial is corrected you flash once.
If serial is 0-F, this is incorrect and you need to do a 2 part flash in AFT to correct it.
Watch the video carefully from 2:17 mins see if you are not doing something right !
Ps , are you flashing a raw file in AFT ?
Click to expand...
Click to collapse
sorry, i kinda not understand by that...so if i can downgrade, what does that mean??
is flashing using AFT and adb sideload the same?...i though that AFT flashing flash more deeper than adbsideload or using recovery
(i mean is that AFT do flash more things than adb sideload or OTA update, )
just like XFSTK downloader that looked wayyy more deeper flash using AFT...
i said normal, because it is not "0123456789ABCDF" but "F7AZGF00N937" (which also showed in AFT)
but, after i looked closely, its SN for a brief moment, show "0123456789ABCDF" about 2-3 seconds, i dont know whats that mean...i though just a refresh...
let me show you with a video what i mean here:
https://youtu.be/ksjVDFD2V-A
i record just now, after i press power + vol up to enter fastboot mode
yes, i tried Flash rawfile in AFT...
i download few raw files like
WW_ZE550ML_2.20.40.92_20150918.raw
WW_ZE550ML_2.20.40.156_20160815.raw
WW_ZE550ML_2.20.40.155_20160713.raw
all raw file i get from here
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966

kenbo111 said:
Out of curiosity, what was the file you tried to flash with the asus flash tool? Was it a raw file?
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
i tried flash raw file i get from here
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
the one from "ZF2 5,5" ZE550ML"
or maybe there another raw file i should try??

oh, i rememeber a little details
so, when i tried flash using adb side load,
when i type "adb devices" in CMD directed to specified folder it show like this:
List of devices attached
0123456789ABCDEF sideload
and yet, flashing using adb sideload finish normally without any error...(but still with the same "cant hear calling" problem )
how come it not read my correct serial number??

kim7tng said:
sorry, i kinda not understand by that...so if i can downgrade, what does that mean??
is flashing using AFT and adb sideload the same?...i though that AFT flashing flash more deeper than adbsideload or using recovery
(i mean is that AFT do flash more things than adb sideload or OTA update, )
just like XFSTK downloader that looked wayyy more deeper flash using AFT...
i said normal, because it is not "0123456789ABCDF" but "F7AZGF00N937" (which also showed in AFT)
but, after i looked closely, its SN for a brief moment, show "0123456789ABCDF" about 2-3 seconds, i dont know whats that mean...i though just a refresh...
let me show you with a video what i mean here:
https://youtu.be/ksjVDFD2V-A
i record just now, after i press power + vol up to enter fastboot mode
yes, i tried Flash rawfile in AFT...
i download few raw files like
WW_ZE550ML_2.20.40.92_20150918.raw
WW_ZE550ML_2.20.40.156_20160815.raw
WW_ZE550ML_2.20.40.155_20160713.raw
all raw file i get from here
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
Click to expand...
Click to collapse
Check you have driver >
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
When you press vol+ serial is corrected and you only need to flash once in AFT
AFT flash is fastboot mode flash .
Have you checked the video ? highlighted (clicked on ) your serial number, it turns blue ? before flashing
Use the AFT i have in my unbrick thread .
Also , tick erase data in AFT before hitting start :good:
AFT >
http://www.mediafire.com/file/sm76jyyz8t1axmz/AsusFlashToolInstaller_1.0.0.17.rar
Video of AFT settings and flash procedure from 2;17 mins in
https://www.youtube.com/watch?v=PmbRaJijIBs&feature=youtu.be
Note.....
If this above is done correctly then you should be-able to flash it in AFT
Downgrading from M to LP which you succeeded with checks everything re software is OK before flashing , which you succeeded with.
I notice you were worried IF the bootloader was unlocked previously in the other thread and that this maybe affecting the AFT flash .
You said you got this phone off your sister ? Does she know if she unlocked bootloader ?.
source >
https://forum.xda-developers.com/ze...ool-failed-t3574763/post71516049#post71516049
"...........
in fastboot mode, my serial number is looks normal but "bootloader version - unknown"...
i wonder if the phone bootloader have been unlock, so it cannot be flash using AFT. ..........."
Heres , what i suggest might have happened although NOT too sure.
Someone previous bricked the device.
Didnt flash or succeed to restore serial correctly ... Then used other software to create a serial number which did`nt correspond with the imei .
This is the only thing i can think of .
This doesnt explain how downgrade version succeeded though .

timbernot said:
Check you have driver >
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
When you press vol+ serial is corrected and you only need to flash once in AFT
AFT flash is fastboot mode flash .
Have you checked the video ? highlighted (clicked on ) your serial number, it turns blue ? before flashing
Use the AFT i have in my unbrick thread .
Also , tick erase data in AFT before hitting start :good:
AFT >
http://www.mediafire.com/file/sm76jyyz8t1axmz/AsusFlashToolInstaller_1.0.0.17.rar
Video of AFT settings and flash procedure from 2;17 mins in
https://www.youtube.com/watch?v=PmbRaJijIBs&feature=youtu.be
Note.....
If this above is done correctly then you should be-able to flash it in AFT
Downgrading from M to LP which you succeeded with checks everything re software is OK before flashing , which you succeeded with.
I notice you were worried IF the bootloader was unlocked previously in the other thread and that this maybe affecting the AFT flash .
You said you got this phone off your sister ? Does she know if she unlocked bootloader ?.
source >
https://forum.xda-developers.com/ze...ool-failed-t3574763/post71516049#post71516049
"...........
in fastboot mode, my serial number is looks normal but "bootloader version - unknown"...
i wonder if the phone bootloader have been unlock, so it cannot be flash using AFT. ..........."
Heres , what i suggest might have happened although NOT too sure.
Someone previous bricked the device.
Didnt flash or succeed to restore serial correctly ... Then used other software to create a serial number which did`nt correspond with the imei .
This is the only thing i can think of .
This doesnt explain how downgrade version succeeded though .
Click to expand...
Click to collapse
Yes, i have watch the video...
and yes, the State is blue circle just like in the video...
the different is that after i click start, it turns yellow for few seconds and afterthat, show red circle with error "Flash image failure (FAILED (wrong image format))"
i will show u the video when i got time to do it...but maybe tommorow, since now i got something to do...
i am not in a hurry after all, and i really thankfull you helping me sharing your knowledge...
i wonder because the the stock bootloader version said unknown...i am guessing, with normal phone everything should have some status or whatever, right?? maybe some number or code...
what is the status with normal phone looked like?? or is it normal for un-mod phone to have bootloader version unknown??
i cannot compare to other phone, because i only got this 1 phone...
can you show me what the normal fastboot mode looked like?? with all other status, so i can get more picture of it
yes, i got this from my sister...and i believe she doesnt know anything like this...she is just pure user type, know what i mean, right...
but i dont know if she ever bring this phone to the service or not, i gonna ask her next time i meet her...she is not in the same house with me...
and she bought this phone brandnew from official store, i believe...
and the serial number detected on AFT is the same as number in the back of the phone, which is "F7AZGF00N937"
and also, as far as i know, this phone never bricked (this bricked mean you cannot enter the OS to use the phone, right? like bootloop or cannot start at all)