Hi all,
I am failing to flash anything I try to, with the errors you can see in the screesnhot.
Odin fails as well on everything with
Complete (write) operation failed.
Any suggestions?
Thanks,
Kmosh.
Dunno because I can't tell what you're trying to do to?
From that snapshot, it looks like you're trying to flash something in stock recovery. Stock recovery only allows verified OTA to flash manually so it rejects it. Are you trying to flash a zip from sdcard in stock recovery?
A snapshot of phone when Odin fails might help. Does it say something like rejected by R/L? That would mean you have reactivation lock enabled in Settings/Security. Boot system, unlock lock-screen, open Settings and unlock it.
A snapshot of Odin log would help too. What are you trying to flash? Did you verify md5 against the zip when you downloaded (zipped re-uploaded tar.md5 usually include a md5 to check)? Did you drag the tar.md5 of the zip to folder after right click/show archive? Which stock tar, tar.md5, img.tar or root are you trying to flash in Odin?
Regarding the questions above, you can only Odin stock tars for Android 5.1 and 6.0+ if your bootloader is updated past Android 5.0
So there are limits to what and where you can flash. It's not clear what you're doing so I need more input if my reply doesn't help any.
Make sure your reactivation lock is unlocked, enable USB debug in engineering mode. Make sure Samsung USB driver for PC is installed. Use stock USB cable if possible but any certified cable with data lines should work. Make sure you see COM added in Odin when you USB connect to flash (before you start flash). And watch Odin log and phone screen for errors.
If you're truly stuck and can't flash anything, you may have wiped system while reactivation lock was enabled (this only applies to newer bootloader on Android 5.1 and up). This trips and activates factory reset protection. If you suspect that happened, you need to Odin the update the phone was on before you wiped. You will need to sign in with same Google user and password that was registered before the wipe during setup wizard.
Another workaround that once worked for issue above was to flash Chainfire Auto Root for Note 4 and auto reboot. Depends on if OS was actually wiped though. Won't boot without OS.
Sent from my SM-N910P using Tapatalk
Hi samep,
My problem is that the phone is locked and I can't unlock it.
so getting into settings or whatever inside the phone is not possible.
I've just tried to flash N910PVPU4COJ6_N910PSPT4COJ6_N910PVPU4COJ6_HOME.tar using Odin, and got the below -
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
getting the below on the device, and it is freeze up
kmosh said:
getting the below on the device, and it is freeze up
Click to expand...
Click to collapse
I could be wrong but it looks like you're on an older bootloader that doesn't include the reactivation lock.
But it's not rooted and not writing because it encountered an eMMC error.
Correct? It's covered under factory warranty or other warranty? I wouldn't advise rooting or further flashing but return for replacement immediately.
IMO, the eMMC failure on Note 4 is all too common. It's been known to happen when flashing or taking an OTA. I wouldn't recommend volunteering that you tried to flash it though. Just say it failed on OTA update.
Sent from my SM-N910P using Tapatalk
Thanks samep,
I do not live in the US, and the phone was sent to me as a gift.
So actually at this point it is just a brick for me, tho fully working, just locked with fingerprint and code which I can't obtain.
I don't mind trying anything that will give me access to the phone and use it, even by deleting everything.
would you suggest re-partition?
It may have the earlier version of reactivation lock on it. In that case, the OS is still intact but you run the risk of tripping an efuse fixing this with Odin.
Given what you replied with, the registered fingerprints are unknown and the backup password is unknown as well? The person gifting that gem must have a sense of humor. It would be best if the original gifter could forward the backup password. Once in the Settings, disable the reactivation lock in Security, remove the user accounts and factory reset within Settings before trying to do anything with it. (If the phone was setup in advance to use on your carrier, don't factory reset).
I can't help any further but if you'll Google Factory Reset Protection, you may find blog posts and YouTube videos showing how to get past that with OTG and downloads.
FWIW, I don't think Sprint phones make good gifts nor should they be considered easily unlocked to use on another carrier. Sprint OS and Samsung's regional lock are other obstacles to consider. But it's not within my knowledge base to say for certain how bad things actually are. It has been done. I welcome another's help in this thread.
Sent from my SM-N910P using Tapatalk
kmosh said:
Hi samep,
My problem is that the phone is locked and I can't unlock it.
so getting into settings or whatever inside the phone is not possible.
I've just tried to flash N910PVPU4COJ6_N910PSPT4COJ6_N910PVPU4COJ6_HOME.tar using Odin, and got the below -
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You have to install a newer version of bootloader. Odin in the latest firmware.
Note 4
SM-N910P
http://www.sammobile.com/firmwares/database/SM-N910P/
Thanks planb234, but it didn't help. same results.
seems the device is write protected. can't flash anything, or adb sideload anything as well.
kmosh said:
getting the below on the device, and it is freeze up
Click to expand...
Click to collapse
I have this exact issue. The internal storage chip has physically failed. It happens due to our phone heating up and causing damage to the emmc and over time it will meet its demise.
Related
I soft bricked my phone somehow, no clue. My phone was fine, battery died with no downloads, or anything running, went to turn it back on after plugging it in to find it bricked at the Samsung start screen.
I've tried restoring it with Kies, which won't recognize my phone is plugged in(??).
I've tried restoring it in Odin with Kies uninstalled, it keeps failing though.
Here's a copy of Odin's log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVBMD1_T889TMBBMD1_935627_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> sboot.bin
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My Note 2 has never been rooted, and I'm completely at a loss as to what has happened. I've tried different USB cords and slots around my laptop, but don't have another computer I can try it on currently.
Also, After trying Kies and Odin I noticed in the top left corner of my Note's screen, KNOX WARRANTY VOID changed from 0 to 1, not sure what that means either!
Any suggestions? I'm lost without my phone!
Edit:
After ODIN fails, my phone says unsupported version also in the top left corner. I've tried 3 different stock ROMs.
Edit 2:
And now I can't get into the boot menu, just the download menu.
Kies also won't recognize that my phone is connected now.
Find latest firmware for your region and device and use Odin to flash it.
Regarding the file in your Odin log seems to be old firmware.
I've tried at least 4 different firmware versions, and am having no luck with any of them. Should I be looking for one that includes the OTA update from back in the winter?
Androidwizzard said:
Find latest firmware for your region and device and use Odin to flash it.
Regarding the file in your Odin log seems to be old firmware.
Click to expand...
Click to collapse
I have the same problem. any other sugestions?
Not yet, I've yet to find a firmware that works. :/
Jotapoggi said:
I have the same problem. any other sugestions?
Click to expand...
Click to collapse
FIX
kittylee said:
Not yet, I've yet to find a firmware that works. :/
Click to expand...
Click to collapse
Kittylee, take a look at this video " youtube . com / watch?v=GbAJH_mL6N4" I've downloaded the rar version of the clockwork recovery for my GT-N7100 from this site "galaxynote2root . com / cwm-recovery /" you have to choose the "RAR" version since it's thhe one odin uses.
OBS.: Remove the spaces from the links
It worked for me. try it.
:laugh:
Got it un-bricked! I was able to find the latest firmware on SamMobile's website, I can't link it though due to being a new user.
kittylee said:
Not yet, I've yet to find a firmware that works. :/
Click to expand...
Click to collapse
kittylee said:
Got it un-bricked! I was able to find the latest firmware on SamMobile's website, I can't link it though due to being a new user.
Click to expand...
Click to collapse
Which version of andriod is it?
Hello guys,
I hope you are all doing well and i am here to see if you are able to help me. So, i tried to install TWRP and apparently i did it with the wrong version because now my phone is stuck in the Logo screen with the red message reading that recovery is not seandroid enforcing. I have been reading around and people say i should go into recovery mode and try to factory reset, the problem is that i can't go into recovery mode since pressing volumeup/home/power doesn't work, the only thing that works is me pressing volumedown/home/power which brings me into Download mode, so i looked around and found out that an easy solution for this is to download your stock rom and flash it with ODIN3. The problem here is that with OI1 update, Odin flash is not working properly so when i try to install my stock rom, which i am guessing is this one: G920PVPU2BOH1_G920PSPT2BOH1_G920PVPU2BOH1_HOME.tar Odin prompts me with this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am really desperate here as i don't know what to do anymore, i flashed V-Kernel-925P-BOFE-071915 and it installs successfully but this doesn't seem to help at all. Before i tried TWRP my phone was working fine, rooted with UniKernel_v8-0001-BOH1-920P-091215, what i was trying to do was install TWRP so i could install a custom ROM since Sprint one was full of security checks.
Now i can't even access my phone anymore which has me really concerned.
If anyone has any clue of what i should do please lend me a hand, i will certainly thank you for it.
*******UPDATE********
I managed to install TWRP from this page http://forum.xda-developers.com/spr...h-recovery-t3102034/post60575155#post60575155 and now i can access TWRP but the phone is still showing that "RECOVERY" and won't boot into OS, only to TWRP and automatically, not needing me to Vol+/Home/Power. Also the TWRP ui touch is flipped horizontally, what i mean is whatever icon i press on the left side of the phone and its sub menus only activate the buttons on the opposite (right side). Does anyone know the reason for this?
martinvince said:
Hello guys,
I hope you are all doing well and i am here to see if you are able to help me. So, i tried to install TWRP and apparently i did it with the wrong version because now my phone is stuck in the Logo screen with the red message reading that recovery is not seandroid enforcing. I have been reading around and people say i should go into recovery mode and try to factory reset, the problem is that i can't go into recovery mode since pressing volumeup/home/power doesn't work, the only thing that works is me pressing volumedown/home/power which brings me into Download mode, so i looked around and found out that an easy solution for this is to download your stock rom and flash it with ODIN3. The problem here is that with OI1 update, Odin flash is not working properly so when i try to install my stock rom, which i am guessing is this one: G920PVPU2BOH1_G920PSPT2BOH1_G920PVPU2BOH1_HOME.tar Odin prompts me with this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am really desperate here as i don't know what to do anymore, i flashed V-Kernel-925P-BOFE-071915 and it installs successfully but this doesn't seem to help at all. Before i tried TWRP my phone was working fine, rooted with UniKernel_v8-0001-BOH1-920P-091215, what i was trying to do was install TWRP so i could install a custom ROM since Sprint one was full of security checks.
Now i can't even access my phone anymore which has me really concerned.
If anyone has any clue of what i should do please lend me a hand, i will certainly thank you for it.
*******UPDATE********
I managed to install TWRP from this page http://forum.xda-developers.com/spr...h-recovery-t3102034/post60575155#post60575155 and now i can access TWRP but the phone is still showing that "RECOVERY" and won't boot into OS, only to TWRP and automatically, not needing me to Vol+/Home/Power. Also the TWRP ui touch is flipped horizontally, what i mean is whatever icon i press on the left side of the phone and its sub menus only activate the buttons on the opposite (right side). Does anyone know the reason for this?
Click to expand...
Click to collapse
You might try contacting @Joshwaaa. He has some experience with OI1.
Saafir said:
I see you flashed an Edge kernel and then got TWRP to stick. Thats because stock kernel will overwrite to stock recovery without a custom kernel. Flash the G920P Unikernel and you should boot back up now.
Click to expand...
Click to collapse
yea i spent a day reading about adb sideline and managed to install a custom rom and then installed the proper kernel and everything is working fine now thanks for your help!
martinvince said:
yea i spent a day reading about adb sideline and managed to install a custom rom and then installed the proper kernel and everything is working fine now thanks for your help!
Click to expand...
Click to collapse
Hey I recently ran into this same problem and I've been up all night trying to figure it out. Can you please guide me on how to fix this please, much appreciated
So I was recently able to root my s6, however now I cannot return it to complete stock.
Whenever I try to unroot my phone via Odin and g920p oh1 firmware, it gives a nandwrite error.
When I try to do it via kies/SS I get to the point where I need to input a serial number, just to have it tell me I'm wrong.
Also I used romified and it would stay at the Dodge logo. Edgar's roms work though. However, if I Odin any other twrp besides the actual 2.8.7 sprint version, I get errors all around. And while I'm using 2.8.7 sprint twrp, it flips the horizontal touch. So I need a qwerty pad an "A" press would input a "P".
Prior to rooting I was on the newest firmware, oi1.
Is there anyway I'd be able to install firmware via an app? Or help I can get? Any insight would be helpful. Or would I just have to wait for a tar of oi1?
zyphil said:
So I was recently able to root my s6, however now I cannot return it to complete stock.
Whenever I try to unroot my phone via Odin and g920p oh1 firmware, it gives a nandwrite error.
When I try to do it via kies/SS I get to the point where I need to input a serial number, just to have it tell me I'm wrong.
Also I used romified and it would stay at the Dodge logo. Edgar's roms work though. However, if I Odin any other twrp besides the actual 2.8.7 sprint version, I get errors all around. And while I'm using 2.8.7 sprint twrp, it flips the horizontal touch. So I need a qwerty pad an "A" press would input a "P".
Prior to rooting I was on the newest firmware, oi1.
Is there anyway I'd be able to install firmware via an app? Or help I can get? Any insight would be helpful. Or would I just have to wait for a tar of oi1?
Click to expand...
Click to collapse
Go to Settings -> Developer Options (click on Build number in the About file if you don't see these options) and be sure that OEM unlocking is set to On. Then try using Odin to install the OH1 firmware again.
OEM unlock isn't appearing.
zyphil said:
OEM unlock isn't appearing.
Click to expand...
Click to collapse
Do you have Developer Options enabled? It should be there.
koop1955 said:
Do you have Developer Options enabled? It should be there.
Click to expand...
Click to collapse
I did yeah. Apparently it was just xtref not having the option. So I flashed ramified and was finally able to tick oem unlock.
However, I still can't get it to flash stock firmware via odin.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU2BOF7_G920PSPT2BOF7_G920PVPU2BOF7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Download mode gives "SW REV. CHECK FAIL. DEVICE 3 BINARY 2"
I see your problem now. "Prior to rooting I was on the newest firmware, oi1." Because you updated to that, you will not be able to revert to an older firmware.
However you are very fortunate. Please see http://www.sammobile.com/firmwares/database/SM-G920P/
Grab the OI1 Firmware there and you should be able to Odin that.
I recently rooted my device. I had uninstalled superSU on accident. I reinstalled and it said it couldn't update the binary. I then prompted to try to run the root again. It failed and reboot except this time my phone now reboots in maybe 1-2 minutes and it seems the cell service wont start either. I tried safe mode and the same issue. It would reboot in 1-3 minutes. I factory reset and wiped the cache several times. Currently downloading stock firmware to try to flash via odin. Any suggestions on fixing it?
UPDATE
Was able to flash stock 5.1.1. Even stock firmware, still rebooted every minute even in safe mode.
Ended up flashing stock 5.1.1 and run the same root and also flash twrp to the device. Nonetheless It still reboots every minute, even in safe mode. Below is the recovery.txt and also attached is a photo of where it's stuck because of rebooting. I swear it's something with the cellular...
recovery.txt
Where it stuck due to rebooting every minute
Update 2
The reboot does not occur in twrp or download mode
Update 3
Following Koops second method
1) Return to Stock via TAR.
2) Install TWRP via Odin.
3) From TRWP do an Advanced Wipe - Dalvik Cache, Cache, Data and Internal Storage. (That is as complete a wipe as I know how to do.)
4) Go back to Stock via TAR.
Click to expand...
Click to collapse
After the stock flash, booting up hangs on the sprint loading screen, dims, then restarts (only first time star. then ting up after flash) goes through setup, but again reboots every minute. The bars at the top sometime show up and sometime don't show up.
Also every reboot, i turned on voice assistant and "system update" is said every time.
At this point im open to any suggestions. If it's not fixed today ill most likely have to go buy an s5 off of amazon.
UPDATE
Got the phone through setup. Baseband and software version is unknown and notification of "Checking device status" is constant. Even after flashing stock 5.1.1. After about a minute, the device status becomes official.
Might try this:
technobezz.com/fix-samsung-galaxy-unknown-baseband-version/
UPDATE
forum.hovatek.com/thread-116.html
Tried using these methods to fix the baseband issue yet still havent fixed it.
UPDATE Finale
For some reason Koops stock firmware didn't work with my phone. I'e uploaded the firmware that did in case others run into the same issue.
mediafire.com/download/c55xaeb7geq0i2d/G920PVPU3BOJ7_G920PSPT3BOJ7_SPR.zip
Thank you everyone who helped!
Pictures of device info added below for specific info
Also if it helps I had flashed twrp before anything. I forget specifically if I did anything in twrp that may have helped or not.
http://imgur.com/vUmjfbX
http://imgur.com/CXql8Li
http://imgur.com/2dUJ1om
x1xmadex1x said:
I recently rooted my device. I had uninstalled superSU on accident. I reinstalled and it said it couldn't update the binary. I then prompted to try to run the root again. It failed and reboot except this time my phone now reboots in maybe 1-2 minutes and it seems the cell service wont start either. I tried safe mode and the same issue. It would reboot in 1-3 minutes. I factory reset and wiped the cache several times. Currently downloading stock firmware to try to flash via odin. Any suggestions on fixing it?
Click to expand...
Click to collapse
Flash back to stock via Odin and install twrp then flash THIS version of SuperSU. Unlike the normal version, this one will not install in the system thus lowering the risk of breaking your device(s)
Flash failed
I tried flashing stock:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
on phone: SW REV. Check Fail Device: 3,Binary: 1
Any input?
Edit Only had "AP" selected in odin...fairly new to droid...how would I go about fixing this hodgepodge of a mess
Try this TAR, it is the latest:
https://www.androidfilehost.com/?fid=24343351889231947
OCF, which failed for for, is 5.02 from May. The one above is 5.11 from December.
Still rebooting
I flashed the newest one, the one linked and yet it still reboots after about a minute...cant get past the "Optimizing app" part now...it reboots before it can finish.
It seems like it reboots when trying to get signal....my bars come up but no reception..then just reboots...
Helpful info?
If it helps, I used this to root it:
autoroot.chainfire.eu
samsung SM-G920P zerofltespr zerofltespr universal7420 exynos5 LMY47X.G920PVPU3BOJ7 5.1.1
Like i said i uninstalled super su, reinstalled, than ran that through odin again and it crashed.
x1xmadex1x said:
I tried flashing stock:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
on phone: SW REV. Check Fail Device: 3,Binary: 1
Any input?
Edit Only had "AP" selected in odin...fairly new to droid...how would I go about fixing this hodgepodge of a mess
Click to expand...
Click to collapse
What do you have ticked under options?
1619415 said:
What do you have ticked under options?
Click to expand...
Click to collapse
It successfully flashed the samsung Official
sm-G920P
I checked the "AP" and used the latest 5.1.1 previously linked and in options I had auto-reboot and F-Reset Time ticked
x1xmadex1x said:
It successfully flashed the samsung Official
sm-G920P
I checked the "AP" and used the latest 5.1.1 previously linked and in options I had auto-reboot and F-Reset Time ticked
Click to expand...
Click to collapse
Try doing it this time without rooting
1619415 said:
Try doing it this time without rooting
Click to expand...
Click to collapse
Second time flashing stock 5.1.1 which was previously linked thanks to koop1955.
G920PVPU3BOL1_G920PSPT3BOL1_G920PVPU3BOL1_HOME.tar.MD5
-First time was successful but nonetheless have the same issue; Continuous reboot after about a minute being on.
-Second time flashing the 5.1.1 stock with "AP" checked and in options "Auto-reboot" and "F. Reset Time" checked.
Log from odin below:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Yet I am still getting the same issue: rebooting about every minute to being turned on
koop1955 said:
Try this TAR, it is the latest:
https://www.androidfilehost.com/?fid=24343351889231947
OCF, which failed for for, is 5.02 from May. The one above is 5.11 from December.
Click to expand...
Click to collapse
Correct tar and successful, but doesnt solve my problem...still rebooting a minute to being turned on even in safe mode
Updated main
Does it do this while in download mode and TWRP (not plugged in)? To me it sounds like maybe the battery is bad...
1619415 said:
Does it do this while in download mode and TWRP (not plugged in)? To me it sounds like maybe the battery is bad...
Click to expand...
Click to collapse
No, it does not happen in twrp or download mode (plugged in or not plugged in)...I just got the galaxy s6 less than a month ago
I am having a very similar issue, can't seem to figure out how to fix it.
x1xmadex1x said:
No, it does not happen in twrp or download mode (plugged in or not plugged in)...I just got the galaxy s6 less than a month ago
Click to expand...
Click to collapse
When I first got mine, it had a battery problem and I brought it to Sprint and they gave me a new one right there for free.... Mine would power off every hour because it couldn't hold a charge.
1619415 said:
When I first got mine, it had a battery problem and I brought it to Sprint and they gave me a new one right there for free.... Mine would power off every hour because it couldn't hold a charge.
Click to expand...
Click to collapse
My knox counter is tripped and the galaxy s6 doesnt have a removeable battery...it says it has a charge..i dont think the battery is the issue...
x1xmadex1x said:
Second time flashing stock 5.1.1 which was previously linked thanks to koop1955.
G920PVPU3BOL1_G920PSPT3BOL1_G920PVPU3BOL1_HOME.tar.MD5
-First time was successful but nonetheless have the same issue; Continuous reboot after about a minute being on.
-Second time flashing the 5.1.1 stock with "AP" checked and in options "Auto-reboot" and "F. Reset Time" checked.
Log from odin below:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Yet I am still getting the same issue: rebooting about every minute to being turned on
Click to expand...
Click to collapse
After it flashes, boot to STOCK recovery and perform a data wipe/factory reset. My guesses are you have stale leftovers from previous ROM/build and the system can't find what it is looking for and terminates.
Last hope if everything else has failed:
1) Return to Stock via TAR.
2) Reboot to recovery (Stock) and do a factory reset.
See if that fixes it. If not -
1) Return to Stock via TAR.
2) Install TWRP via Odin.
3) From TRWP do an Advanced Wipe - Dalvik Cache, Cache, Data and Internal Storage. (That is as complete a wipe as I know how to do.)
4) Go back to Stock via TAR.
DO NOT USE THE CHAINFIRE SUPERSU ANYMORE. That seems to have caused problems.
koop1955 said:
Last hope if everything else has failed:
1) Return to Stock via TAR.
2) Reboot to recovery (Stock) and do a factory reset.
See if that fixes it. If not -
1) Return to Stock via TAR.
2) Install TWRP via Odin.
3) From TRWP do an Advanced Wipe - Dalvik Cache, Cache, Data and Internal Storage. (That is as complete a wipe as I know how to do.)
4) Go back to Stock via TAR.
DO NOT USE THE CHAINFIRE SUPERSU ANYMORE. That seems to have caused problems.
Click to expand...
Click to collapse
Thank you, will try that in a little.
What about a "PIT" file?
Good afternoon XDA Developers!! I'm new in this forum. It is so awesome!!
I have a terrible problem with my Note II. My phone runs, opens download mode and recovery (I have a custom) but gets stuck in the main logo. I tried downloading firmwares and flashing with Odin and always happens the same error.
Odin 3.10.7
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sometimes Odin gets stuck in "Setup Connection", I remove and put the battery again and runs, but with the same error described before.
I tried downloading stock firmwares from my country (Mexico), now I tried with one from Russia, and now I'm downloading a Repair Pack with BL, PDA, CSC and MODEM (I'm doubting that this will work).
I was checking the repairing manuals from Samsung, and I believe that the main problem is in the IC (U500) or probably R503, but if this will be the main reason, I need to change the motherboard. I don't hope so.
I disassembled the phone and the IC's and connections "appears to be OK".
Are there another alternatives to verify and repair the phone in the software or hardware? In this case, what can I do? Or what I'm doing wrong to correct the mistakes? I will be so grateful with your help.
Thank you so much. I hope your soon answer!
how it happened - just restarted and stuck on logo for no reason?
Try PIT, but be careful. It's very likely that you have famous SDS, that's why it can't mount partitions and flash anything.
You can also try different Odin versions and PCs/cables
I have downloaded the PIT file and my question is: How can I flash it? With the PDA, MODEM, etc. together or only the PIT alone? What checkboxs i need to check? I was reading about SDS and apparently the only solution is to change the eMMC and weld it. I sent the phone to the Carrier Company "Telcel" to unlock the Phone and after this the phone restarted and restarted and erased all the apps. This happens like 2 or 3 times. After this the phone get stuck in the logo.
Dear Sir,
I am Samsung Note 2 GT N7100 mobile.
My mobile anderoid ver.4.2.2
How to update in lolipop ver.
please support.